Message ID | 1377175700-16229-1-git-send-email-marcel.a@redhat.com |
---|---|
State | New |
Headers | show |
Am 22.08.2013 14:48, schrieb Marcel Apfelbaum: > This patch follows Markus Armbruster suggestion: > > A possibly better way to group help by category: instead of adding > categories to each line, add category headlines, like this: > > Controller/Bridge/Hub devices: > name "NAME", bus "BUS"... > ... > USB devices: > name "NAME", bus "BUS"... > ... > Storage devices: > ... > > This way, showing devices with multiple categories once per category > actually makes sense. > > Note that the "categories to each line" is kept for 2 reasons: > 1. Preparation for multifunction devices > 2. Ability to grep by category > > Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> > --- > qdev-monitor.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/qdev-monitor.c b/qdev-monitor.c > index 410cdcb..a7329b0 100644 > --- a/qdev-monitor.c > +++ b/qdev-monitor.c > @@ -156,6 +156,8 @@ static void qdev_print_category_devices(DeviceCategory category) > DeviceClass *dc; > GSList *list, *curr; > > + error_printf("%s devices:\n", qdev_category_get_name(category)); Why is that an error? Shouldn't it go to stdout? Andreas > + > list = object_class_get_list(TYPE_DEVICE, false); > for (curr = list; curr; curr = g_slist_next(curr)) { > dc = (DeviceClass *)object_class_dynamic_cast(curr->data, TYPE_DEVICE); >
Andreas Färber <afaerber@suse.de> writes: > Am 22.08.2013 14:48, schrieb Marcel Apfelbaum: >> This patch follows Markus Armbruster suggestion: >> >> A possibly better way to group help by category: instead of adding >> categories to each line, add category headlines, like this: >> >> Controller/Bridge/Hub devices: >> name "NAME", bus "BUS"... >> ... >> USB devices: >> name "NAME", bus "BUS"... >> ... >> Storage devices: >> ... >> >> This way, showing devices with multiple categories once per category >> actually makes sense. >> >> Note that the "categories to each line" is kept for 2 reasons: >> 1. Preparation for multifunction devices >> 2. Ability to grep by category >> >> Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> >> --- >> qdev-monitor.c | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/qdev-monitor.c b/qdev-monitor.c >> index 410cdcb..a7329b0 100644 >> --- a/qdev-monitor.c >> +++ b/qdev-monitor.c >> @@ -156,6 +156,8 @@ static void qdev_print_category_devices(DeviceCategory category) >> DeviceClass *dc; >> GSList *list, *curr; >> >> + error_printf("%s devices:\n", qdev_category_get_name(category)); > > Why is that an error? Shouldn't it go to stdout? Output of -device help has always gone to stderr, and that has always annoyed me. Just not enough to fix it. [...]
On 08/22/2013 08:13 AM, Markus Armbruster wrote: >>> +++ b/qdev-monitor.c >>> @@ -156,6 +156,8 @@ static void qdev_print_category_devices(DeviceCategory category) >>> DeviceClass *dc; >>> GSList *list, *curr; >>> >>> + error_printf("%s devices:\n", qdev_category_get_name(category)); >> >> Why is that an error? Shouldn't it go to stdout? > > Output of -device help has always gone to stderr, and that has always > annoyed me. Just not enough to fix it. Back when libvirt scraped -help output, changing it to use stdout would be an incompatible change. But now that libvirt uses QMP, I would also welcome a change to use stdout (but also fall in the category of "not enough of a bother for ME to fix it).
On Thu, 2013-08-22 at 09:34 -0600, Eric Blake wrote: > On 08/22/2013 08:13 AM, Markus Armbruster wrote: > > >>> +++ b/qdev-monitor.c > >>> @@ -156,6 +156,8 @@ static void qdev_print_category_devices(DeviceCategory category) > >>> DeviceClass *dc; > >>> GSList *list, *curr; > >>> > >>> + error_printf("%s devices:\n", qdev_category_get_name(category)); > >> > >> Why is that an error? Shouldn't it go to stdout? > > > > Output of -device help has always gone to stderr, and that has always > > annoyed me. Just not enough to fix it. > > Back when libvirt scraped -help output, changing it to use stdout would > be an incompatible change. But now that libvirt uses QMP, I would also > welcome a change to use stdout (but also fall in the category of "not > enough of a bother for ME to fix it). It really bothers me. I need to use the help (being new to qemu ...) and I am always forgetting "2>&1". Anyone can think of a reason for not sending the help to stdout? Marcel >
Marcel Apfelbaum <marcel.a@redhat.com> writes: > On Thu, 2013-08-22 at 09:34 -0600, Eric Blake wrote: >> On 08/22/2013 08:13 AM, Markus Armbruster wrote: >> >> >>> +++ b/qdev-monitor.c >> >>> @@ -156,6 +156,8 @@ static void >> >>> qdev_print_category_devices(DeviceCategory category) >> >>> DeviceClass *dc; >> >>> GSList *list, *curr; >> >>> >> >>> + error_printf("%s devices:\n", qdev_category_get_name(category)); >> >> >> >> Why is that an error? Shouldn't it go to stdout? >> > >> > Output of -device help has always gone to stderr, and that has always >> > annoyed me. Just not enough to fix it. >> >> Back when libvirt scraped -help output, changing it to use stdout would >> be an incompatible change. But now that libvirt uses QMP, I would also >> welcome a change to use stdout (but also fall in the category of "not >> enough of a bother for ME to fix it). > It really bothers me. I need to use the help (being new to qemu ...) > and I am always forgetting "2>&1". > > Anyone can think of a reason for not sending the help to stdout? Post a patch and find out ;)
On Thu, 2013-08-22 at 15:48 +0300, Marcel Apfelbaum wrote: > This patch follows Markus Armbruster suggestion: > > A possibly better way to group help by category: instead of adding > categories to each line, add category headlines, like this: > > Controller/Bridge/Hub devices: > name "NAME", bus "BUS"... > ... > USB devices: > name "NAME", bus "BUS"... > ... > Storage devices: > ... > > This way, showing devices with multiple categories once per category > actually makes sense. > > Note that the "categories to each line" is kept for 2 reasons: > 1. Preparation for multifunction devices > 2. Ability to grep by category ping Marcel > > Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> > --- > qdev-monitor.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/qdev-monitor.c b/qdev-monitor.c > index 410cdcb..a7329b0 100644 > --- a/qdev-monitor.c > +++ b/qdev-monitor.c > @@ -156,6 +156,8 @@ static void qdev_print_category_devices(DeviceCategory category) > DeviceClass *dc; > GSList *list, *curr; > > + error_printf("%s devices:\n", qdev_category_get_name(category)); > + > list = object_class_get_list(TYPE_DEVICE, false); > for (curr = list; curr; curr = g_slist_next(curr)) { > dc = (DeviceClass *)object_class_dynamic_cast(curr->data, TYPE_DEVICE);
diff --git a/qdev-monitor.c b/qdev-monitor.c index 410cdcb..a7329b0 100644 --- a/qdev-monitor.c +++ b/qdev-monitor.c @@ -156,6 +156,8 @@ static void qdev_print_category_devices(DeviceCategory category) DeviceClass *dc; GSList *list, *curr; + error_printf("%s devices:\n", qdev_category_get_name(category)); + list = object_class_get_list(TYPE_DEVICE, false); for (curr = list; curr; curr = g_slist_next(curr)) { dc = (DeviceClass *)object_class_dynamic_cast(curr->data, TYPE_DEVICE);
This patch follows Markus Armbruster suggestion: A possibly better way to group help by category: instead of adding categories to each line, add category headlines, like this: Controller/Bridge/Hub devices: name "NAME", bus "BUS"... ... USB devices: name "NAME", bus "BUS"... ... Storage devices: ... This way, showing devices with multiple categories once per category actually makes sense. Note that the "categories to each line" is kept for 2 reasons: 1. Preparation for multifunction devices 2. Ability to grep by category Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> --- qdev-monitor.c | 2 ++ 1 file changed, 2 insertions(+)