diff --git a/configure b/configure
index ad32f87..9d46354 100755
--- a/configure
+++ b/configure
@@ -4072,9 +4072,6 @@ if test "$gcov" = "yes" ; then
   echo "GCOV=$gcov_tool" >> $config_host_mak
 fi
 
-# generate list of library paths for linker script
-$ld --verbose -v 2> /dev/null | grep SEARCH_DIR > config-host.ld
-
 # use included Linux headers
 if test "$linux" = "yes" ; then
   mkdir -p linux-headers
@@ -4437,21 +4434,33 @@ if test "$gprof" = "yes" ; then
   fi
 fi
 
-if test "$ARCH" = "tci"; then
-  linker_script=""
-else
-  linker_script="-Wl,-T../config-host.ld -Wl,-T,\$(SRC_PATH)/ldscripts/\$(ARCH).ld"
-fi
-
 if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
+  textseg_addr=
   case "$ARCH" in
-  alpha | s390x | aarch64)
-    # The default placement of the application is fine.
+  arm | hppa | i386 | ia64 | m68k | ppc | ppc64 | s390 | sparc | sparc64 | x86_64)
+    default_textseg_addr=0x400000
+    textseg_addr=0x60000000
     ;;
-  *)
-    ldflags="$linker_script $ldflags"
+  mips)
+    default_textseg_addr=0x120000000
+    textseg_addr=0x400000
     ;;
   esac
+  if [ -n "$textseg_addr" ]; then
+    try_ldflags="-Ttext-segment=$textseg_addr"
+    if $ld $try_ldflags /dev/null >/dev/null 2>&1; then
+      ldflags="$ldflags $try_ldflags"
+    else
+      # In case ld does not support -Ttext-segment, edit the default linker
+      # script via sed to set the .text start addr.  This is needed on FreeBSD
+      # at least.
+      $ld --verbose 2>/dev/null | sed \
+        -e '1,/==================================================/d' \
+        -e '/==================================================/,$d' \
+        -e "s/$default_textseg_addr/$textseg_addr/g" > config-host.ld
+      ldflags="$ldflags -Wl,-T../config-host.ld"
+    fi
+  fi
 fi
 
 echo "LDFLAGS+=$ldflags" >> $config_target_mak
diff --git a/ldscripts/alpha.ld b/ldscripts/alpha.ld
deleted file mode 100644
index 906d76b..0000000
--- a/ldscripts/alpha.ld
+++ /dev/null
@@ -1,127 +0,0 @@
-OUTPUT_FORMAT("elf64-alpha", "elf64-alpha",
-	      "elf64-alpha")
-OUTPUT_ARCH(alpha)
-ENTRY(__start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x60000000 + SIZEOF_HEADERS;
-  .interp     : { *(.interp) 	}
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .gnu.version   : { *(.gnu.version)	}
-  .gnu.version_d   : { *(.gnu.version_d)	}
-  .gnu.version_r   : { *(.gnu.version_r)	}
-  .rel.text      :
-    { *(.rel.text) *(.rel.gnu.linkonce.t*) }
-  .rela.text     :
-    { *(.rela.text) *(.rela.gnu.linkonce.t*) }
-  .rel.data      :
-    { *(.rel.data) *(.rel.gnu.linkonce.d*) }
-  .rela.data     :
-    { *(.rela.data) *(.rela.gnu.linkonce.d*) }
-  .rel.rodata    :
-    { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
-  .rela.rodata   :
-    { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.init      : { *(.rel.init)	}
-  .rela.init     : { *(.rela.init)	}
-  .rel.fini      : { *(.rel.fini)	}
-  .rela.fini     : { *(.rela.fini)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	} =0x47ff041f
-  .text      :
-  {
-    *(.text)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-  } =0x47ff041f
-  _etext = .;
-  PROVIDE (etext = .);
-  .fini      : { *(.fini)    } =0x47ff041f
-  .rodata    : { *(.rodata) *(.gnu.linkonce.r*) }
-  .rodata1   : { *(.rodata1) }
-  .reginfo : { *(.reginfo) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(0x100000) + (. & (0x100000 - 1));
-  .data    :
-  {
-    *(.data)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-  }
-  .data1   : { *(.data1) }
-  .ctors         :
-  {
-    *(.ctors)
-  }
-  .dtors         :
-  {
-    *(.dtors)
-  }
-  .plt      : { *(.plt)	}
-  .got           : { *(.got.plt) *(.got) }
-  .dynamic       : { *(.dynamic) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata     : { *(.sdata) }
-  _edata  =  .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss      : { *(.sbss) *(.scommon) }
-  .bss       :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-}
diff --git a/ldscripts/arm.ld b/ldscripts/arm.ld
deleted file mode 100644
index 7f13da9..0000000
--- a/ldscripts/arm.ld
+++ /dev/null
@@ -1,153 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm",
-	      "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x60000000 + SIZEOF_HEADERS;
-  .interp     : { *(.interp) 	}
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .gnu.version   : { *(.gnu.version)	}
-  .gnu.version_d   : { *(.gnu.version_d)	}
-  .gnu.version_r   : { *(.gnu.version_r)	}
-  .rel.text      :
-    { *(.rel.text) *(.rel.gnu.linkonce.t*) }
-  .rela.text     :
-    { *(.rela.text) *(.rela.gnu.linkonce.t*) }
-  .rel.data      :
-    { *(.rel.data) *(.rel.gnu.linkonce.d*) }
-  .rela.data     :
-    { *(.rela.data) *(.rela.gnu.linkonce.d*) }
-  .rel.rodata    :
-    { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
-  .rela.rodata   :
-    { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.init      : { *(.rel.init)	}
-  .rela.init     : { *(.rela.init)	}
-  .rel.fini      : { *(.rel.fini)	}
-  .rela.fini     : { *(.rela.fini)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	} =0x47ff041f
-  .text      :
-  {
-    *(.text)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-  } =0x47ff041f
-  _etext = .;
-  PROVIDE (etext = .);
-  .fini      : { *(.fini)    } =0x47ff041f
-  .rodata    : { *(.rodata) *(.gnu.linkonce.r*) }
-  .rodata1   : { *(.rodata1) }
-  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
-   __exidx_start = .;
-  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
-   __exidx_end = .;
-  .reginfo : { *(.reginfo) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(0x100000) + (. & (0x100000 - 1));
-  .data    :
-  {
-    *(.gen_code)
-    *(.data)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-  }
-  .tbss           : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .data1   : { *(.data1) }
-  .preinit_array     :
-  {
-    PROVIDE (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE (__preinit_array_end = .);
-  }
-  .init_array     :
-  {
-     PROVIDE (__init_array_start = .);
-     KEEP (*(SORT(.init_array.*)))
-     KEEP (*(.init_array))
-     PROVIDE (__init_array_end = .);
-  }
-  .fini_array     :
-  {
-    PROVIDE (__fini_array_start = .);
-    KEEP (*(.fini_array))
-    KEEP (*(SORT(.fini_array.*)))
-    PROVIDE (__fini_array_end = .);
-  }
-  .ctors         :
-  {
-    *(.ctors)
-  }
-  .dtors         :
-  {
-    *(.dtors)
-  }
-  .plt      : { *(.plt)	}
-  .got           : { *(.got.plt) *(.got) }
-  .dynamic       : { *(.dynamic) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata     : { *(.sdata) }
-  _edata  =  .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss      : { *(.sbss) *(.scommon) }
-  .bss       :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-}
diff --git a/ldscripts/hppa.ld b/ldscripts/hppa.ld
deleted file mode 100644
index 3555b3e..0000000
--- a/ldscripts/hppa.ld
+++ /dev/null
@@ -1,211 +0,0 @@
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf32-hppa-linux", "elf32-hppa-linux",
-	      "elf32-hppa-linux")
-OUTPUT_ARCH(hppa:hppa1.1)
-ENTRY(_start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  PROVIDE (__executable_start = 0x60000000); . = 0x60000000 + SIZEOF_HEADERS;
-  .interp         : { *(.interp) }
-  .hash           : { *(.hash) }
-  .dynsym         : { *(.dynsym) }
-  .dynstr         : { *(.dynstr) }
-  .gnu.version    : { *(.gnu.version) }
-  .gnu.version_d  : { *(.gnu.version_d) }
-  .gnu.version_r  : { *(.gnu.version_r) }
-  .rel.init       : { *(.rel.init) }
-  .rela.init      : { *(.rela.init) }
-  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
-  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
-  .rel.fini       : { *(.rel.fini) }
-  .rela.fini      : { *(.rela.fini) }
-  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
-  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
-  .rel.data.rel.ro   : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) }
-  .rela.data.rel.ro   : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) }
-  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
-  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
-  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
-  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
-  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
-  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
-  .rel.ctors      : { *(.rel.ctors) }
-  .rela.ctors     : { *(.rela.ctors) }
-  .rel.dtors      : { *(.rel.dtors) }
-  .rela.dtors     : { *(.rela.dtors) }
-  .rel.got        : { *(.rel.got) }
-  .rela.got       : { *(.rela.got) }
-  .rel.sdata      : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
-  .rela.sdata     : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
-  .rel.sbss       : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
-  .rela.sbss      : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
-  .rel.sdata2     : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
-  .rela.sdata2    : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
-  .rel.sbss2      : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
-  .rela.sbss2     : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
-  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
-  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
-  .rel.plt        : { *(.rel.plt) }
-  .rela.plt       : { *(.rela.plt) }
-  .init           :
-  {
-    KEEP (*(.init))
-  } =0x08000240
-  .text           :
-  {
-    *(.text .stub .text.* .gnu.linkonce.t.*)
-    KEEP (*(.text.*personality*))
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-  } =0x08000240
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } =0x08000240
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
-  .rodata1        : { *(.rodata1) }
-  .sdata2         :
-  {
-    *(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
-  }
-  .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
-  .PARISC.unwind   : { *(.PARISC.unwind) }
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(0x10000) + (. & (0x10000 - 1));
-  /* Exception handling  */
-  .eh_frame       : { KEEP (*(.eh_frame)) }
-  .gcc_except_table   : { *(.gcc_except_table .gcc_except_table.*) }
-  /* Thread Local Storage sections  */
-  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .preinit_array     :
-  {
-    PROVIDE (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE (__preinit_array_end = .);
-  }
-  .init_array     :
-  {
-     PROVIDE (__init_array_start = .);
-     KEEP (*(SORT(.init_array.*)))
-     KEEP (*(.init_array))
-     PROVIDE (__init_array_end = .);
-  }
-  .fini_array     :
-  {
-    PROVIDE (__fini_array_start = .);
-    KEEP (*(.fini_array))
-    KEEP (*(SORT(.fini_array.*)))
-    PROVIDE (__fini_array_end = .);
-  }
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin*.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  .dtors          :
-  {
-    KEEP (*crtbegin*.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  .jcr            : { KEEP (*(.jcr)) }
-  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }
-  .dynamic        : { *(.dynamic) }
-  .data           :
-  {
-    PROVIDE ($global$ = .);
-    *(.data .data.* .gnu.linkonce.d.*)
-    KEEP (*(.gnu.linkonce.d.*personality*))
-    SORT(CONSTRUCTORS)
-  }
-  .data1          : { *(.data1) }
-  .plt            : { *(.plt) }
-  .got            : { *(.got.plt) *(.got) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata          :
-  {
-    *(.sdata .sdata.* .gnu.linkonce.s.*)
-  }
-  _edata = .; PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss           :
-  {
-    *(.dynsbss)
-    *(.sbss .sbss.* .gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss            :
-  {
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.
-      FIXME: Why do we need it? When there is no .bss section, we don't
-      pad the .data section.  */
-   . = ALIGN(. != 0 ? 32 / 8 : 1);
-  }
-  . = ALIGN(32 / 8);
-  . = ALIGN(32 / 8);
-  _end = .; PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab          0 : { *(.stab) }
-  .stabstr       0 : { *(.stabstr) }
-  .stab.excl     0 : { *(.stab.excl) }
-  .stab.exclstr  0 : { *(.stab.exclstr) }
-  .stab.index    0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment       0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /DISCARD/ : { *(.note.GNU-stack) }
-}
diff --git a/ldscripts/i386.ld b/ldscripts/i386.ld
deleted file mode 100644
index cc3f160..0000000
--- a/ldscripts/i386.ld
+++ /dev/null
@@ -1,153 +0,0 @@
-/* ld script to make i386 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- */
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(_start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x60000000 + SIZEOF_HEADERS;
-  .interp     : { *(.interp) 	}
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .gnu.version   : { *(.gnu.version)	}
-  .gnu.version_d   : { *(.gnu.version_d)	}
-  .gnu.version_r   : { *(.gnu.version_r)	}
-  .rel.text      :
-    { *(.rel.text) *(.rel.gnu.linkonce.t*) }
-  .rela.text     :
-    { *(.rela.text) *(.rela.gnu.linkonce.t*) }
-  .rel.data      :
-    { *(.rel.data) *(.rel.gnu.linkonce.d*) }
-  .rela.data     :
-    { *(.rela.data) *(.rela.gnu.linkonce.d*) }
-  .rel.rodata    :
-    { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
-  .rela.rodata   :
-    { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.init      : { *(.rel.init)	}
-  .rela.init     : { *(.rela.init)	}
-  .rel.fini      : { *(.rel.fini)	}
-  .rela.fini     : { *(.rela.fini)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt      :
-  {
-    *(.rel.plt)
-    PROVIDE (__rel_iplt_start = .);
-    *(.rel.iplt)
-    PROVIDE (__rel_iplt_end = .);
-  }
-  .rela.plt       :
-  {
-    *(.rela.plt)
-    PROVIDE (__rela_iplt_start = .);
-    *(.rela.iplt)
-    PROVIDE (__rela_iplt_end = .);
-  }
-  .init          : { *(.init)	} =0x47ff041f
-  .text      :
-  {
-    *(.text)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-  } =0x47ff041f
-  _etext = .;
-  PROVIDE (etext = .);
-  .fini      : { *(.fini)    } =0x47ff041f
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { *(.preinit_array) }
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { *(.init_array) }
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { *(.fini_array) }
-  PROVIDE (__fini_array_end = .);
-  .rodata    : { *(.rodata) *(.gnu.linkonce.r*) }
-  .rodata1   : { *(.rodata1) }
-  .reginfo : { *(.reginfo) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(0x100000) + (. & (0x100000 - 1));
-  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .data    :
-  {
-    *(.data)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-  }
-  .data1   : { *(.data1) }
-  .ctors         :
-  {
-    *(.ctors)
-  }
-  .dtors         :
-  {
-    *(.dtors)
-  }
-  .plt      : { *(.plt)	}
-  .got           : { *(.got.plt) *(.got) }
-  .dynamic       : { *(.dynamic) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata     : { *(.sdata) }
-  _edata  =  .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss      : { *(.sbss) *(.scommon) }
-  .bss       :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-}
diff --git a/ldscripts/ia64.ld b/ldscripts/ia64.ld
deleted file mode 100644
index 0c37796..0000000
--- a/ldscripts/ia64.ld
+++ /dev/null
@@ -1,209 +0,0 @@
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf64-ia64-little", "elf64-ia64-little",
-	      "elf64-ia64-little")
-OUTPUT_ARCH(ia64)
-ENTRY(_start)
-/* __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  PROVIDE (__executable_start = 0x60000000); . = 0x60000000 + SIZEOF_HEADERS;
-  .interp         : { *(.interp) }
-  .hash           : { *(.hash) }
-  .dynsym         : { *(.dynsym) }
-  .dynstr         : { *(.dynstr) }
-  .gnu.version    : { *(.gnu.version) }
-  .gnu.version_d  : { *(.gnu.version_d) }
-  .gnu.version_r  : { *(.gnu.version_r) }
-  .rel.init       : { *(.rel.init) }
-  .rela.init      : { *(.rela.init) }
-  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
-  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
-  .rel.fini       : { *(.rel.fini) }
-  .rela.fini      : { *(.rela.fini) }
-  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
-  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
-  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
-  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
-  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
-  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
-  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
-  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
-  .rel.ctors      : { *(.rel.ctors) }
-  .rela.ctors     : { *(.rela.ctors) }
-  .rel.dtors      : { *(.rel.dtors) }
-  .rela.dtors     : { *(.rela.dtors) }
-  .rel.got        : { *(.rel.got) }
-  .rela.got       : { *(.rela.got) }
-  .rel.sdata      : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
-  .rela.sdata     : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
-  .rel.sbss       : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
-  .rela.sbss      : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
-  .rel.sdata2     : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
-  .rela.sdata2    : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
-  .rel.sbss2      : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
-  .rela.sbss2     : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
-  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
-  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
-  .rel.plt        : { *(.rel.plt) }
-  .rela.plt       : { *(.rela.plt) }
-  .rela.IA_64.pltoff   : { *(.rela.IA_64.pltoff) }
-  .init           :
-  {
-    KEEP (*(.init))
-  } =0x00300000010070000002000001000400
-  .plt            : { *(.plt) }
-  .text           :
-  {
-    *(.text .stub .text.* .gnu.linkonce.t.*)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-  } =0x00300000010070000002000001000400
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } =0x00300000010070000002000001000400
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
-  .rodata1        : { *(.rodata1) }
-  .sdata2         : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) }
-  .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
-  .opd            : { *(.opd) }
-  .IA_64.unwind_info   : { *(.IA_64.unwind_info* .gnu.linkonce.ia64unwi.*) }
-  .IA_64.unwind   : { *(.IA_64.unwind* .gnu.linkonce.ia64unw.*) }
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(0x10000) + (. & (0x10000 - 1));
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(64 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { *(.preinit_array) }
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { *(.init_array) }
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { *(.fini_array) }
-  PROVIDE (__fini_array_end = .);
-  .data           :
-  {
-    *(.data .data.* .gnu.linkonce.d.*)
-    SORT(CONSTRUCTORS)
-  }
-  .data1          : { *(.data1) }
-  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .eh_frame       : { KEEP (*(.eh_frame)) }
-  .gcc_except_table   : { *(.gcc_except_table) }
-  .dynamic        : { *(.dynamic) }
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin*.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  .dtors          :
-  {
-    KEEP (*crtbegin*.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  .jcr            : { KEEP (*(.jcr)) }
-  /* Ensure __gp is outside the range of any normal data.  We need to
-     do this to avoid the linker optimizing the code in op.o and getting
-     it out of sync with the relocs that we read when processing that
-     file.  A better solution might be to ensure that the dynamically
-     generated code and static qemu code share a single gp-value.  */
-  __gp = . + 0x200000;
-  .got            : { *(.got.plt) *(.got) }
-  .IA_64.pltoff   : { *(.IA_64.pltoff) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata          :
-  {
-    *(.sdata .sdata.* .gnu.linkonce.s.*)
-  }
-  _edata = .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss           :
-  {
-    PROVIDE (__sbss_start = .);
-    PROVIDE (___sbss_start = .);
-    *(.dynsbss)
-    *(.sbss .sbss.* .gnu.linkonce.sb.*)
-    *(.scommon)
-    PROVIDE (__sbss_end = .);
-    PROVIDE (___sbss_end = .);
-  }
-  .bss            :
-  {
-   . += 0x400000;	/* ensure .bss stuff is out of reach of gp */
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.  */
-   . = ALIGN(64 / 8);
-  }
-  . = ALIGN(64 / 8);
-  _end = .;
-  PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab          0 : { *(.stab) }
-  .stabstr       0 : { *(.stabstr) }
-  .stab.excl     0 : { *(.stab.excl) }
-  .stab.exclstr  0 : { *(.stab.exclstr) }
-  .stab.index    0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment       0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /DISCARD/ : { *(.note.GNU-stack) }
-}
diff --git a/ldscripts/m68k.ld b/ldscripts/m68k.ld
deleted file mode 100644
index 0e3d9de..0000000
--- a/ldscripts/m68k.ld
+++ /dev/null
@@ -1,175 +0,0 @@
-/* Script for -z combreloc: combine and sort reloc sections */
-OUTPUT_FORMAT("elf32-m68k", "elf32-m68k",
-	      "elf32-m68k")
-OUTPUT_ARCH(m68k)
-ENTRY(_start)
-/* __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x60000000 + SIZEOF_HEADERS;
-  .interp         : { *(.interp) }
-  .hash           : { *(.hash) }
-  .dynsym         : { *(.dynsym) }
-  .dynstr         : { *(.dynstr) }
-  .gnu.version    : { *(.gnu.version) }
-  .gnu.version_d  : { *(.gnu.version_d) }
-  .gnu.version_r  : { *(.gnu.version_r) }
-  .rel.dyn        :
-    {
-      *(.rel.init)
-      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
-      *(.rel.fini)
-      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
-      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
-      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
-      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
-      *(.rel.ctors)
-      *(.rel.dtors)
-      *(.rel.got)
-      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
-    }
-  .rela.dyn       :
-    {
-      *(.rela.init)
-      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
-      *(.rela.fini)
-      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
-      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
-      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
-      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
-      *(.rela.ctors)
-      *(.rela.dtors)
-      *(.rela.got)
-      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
-    }
-  .rel.plt        : { *(.rel.plt) }
-  .rela.plt       : { *(.rela.plt) }
-  .init           :
-  {
-    KEEP (*(.init))
-  } =0x4e754e75
-  .plt            : { *(.plt) }
-  .text           :
-  {
-    *(.text .stub .text.* .gnu.linkonce.t.*)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-  } =0x4e754e75
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } =0x4e754e75
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
-  .rodata1        : { *(.rodata1) }
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(0x2000) + (. & (0x2000 - 1));
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { *(.preinit_array) }
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { *(.init_array) }
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { *(.fini_array) }
-  PROVIDE (__fini_array_end = .);
-  .data           :
-  {
-    *(.data .data.* .gnu.linkonce.d.*)
-    SORT(CONSTRUCTORS)
-  }
-  .data1          : { *(.data1) }
-  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .eh_frame       : { KEEP (*(.eh_frame)) }
-  .gcc_except_table   : { *(.gcc_except_table) }
-  .dynamic        : { *(.dynamic) }
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  .jcr            : { KEEP (*(.jcr)) }
-  .got            : { *(.got.plt) *(.got) }
-  _edata = .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .bss            :
-  {
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.  */
-   . = ALIGN(32 / 8);
-  }
-  . = ALIGN(32 / 8);
-  _end = .;
-  PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab          0 : { *(.stab) }
-  .stabstr       0 : { *(.stabstr) }
-  .stab.excl     0 : { *(.stab.excl) }
-  .stab.exclstr  0 : { *(.stab.exclstr) }
-  .stab.index    0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment       0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/ldscripts/mips.ld b/ldscripts/mips.ld
deleted file mode 100644
index 7b610ce..0000000
--- a/ldscripts/mips.ld
+++ /dev/null
@@ -1,222 +0,0 @@
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips",
-             "elf32-tradlittlemips")
-OUTPUT_ARCH(mips)
-ENTRY(__start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  PROVIDE (__executable_start = 0x0400000); . = 0x0400000 + SIZEOF_HEADERS;
-  .interp         : { *(.interp) }
-  .reginfo        : { *(.reginfo) }
-  .dynamic        : { *(.dynamic) }
-  .hash           : { *(.hash) }
-  .dynsym         : { *(.dynsym) }
-  .dynstr         : { *(.dynstr) }
-  .gnu.version    : { *(.gnu.version) }
-  .gnu.version_d  : { *(.gnu.version_d) }
-  .gnu.version_r  : { *(.gnu.version_r) }
-  .rel.init       : { *(.rel.init) }
-  .rela.init      : { *(.rela.init) }
-  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
-  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
-  .rel.fini       : { *(.rel.fini) }
-  .rela.fini      : { *(.rela.fini) }
-  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
-  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
-  .rel.data.rel.ro   : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) }
-  .rela.data.rel.ro   : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) }
-  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
-  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
-  .rel.tdata     : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
-  .rela.tdata    : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
-  .rel.tbss      : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
-  .rela.tbss     : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
-  .rel.ctors      : { *(.rel.ctors) }
-  .rela.ctors     : { *(.rela.ctors) }
-  .rel.dtors      : { *(.rel.dtors) }
-  .rela.dtors     : { *(.rela.dtors) }
-  .rel.got        : { *(.rel.got) }
-  .rela.got       : { *(.rela.got) }
-  .rel.sdata      : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
-  .rela.sdata     : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
-  .rel.sbss       : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
-  .rela.sbss      : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
-  .rel.sdata2     : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
-  .rela.sdata2    : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
-  .rel.sbss2      : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
-  .rela.sbss2     : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
-  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
-  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
-  .rel.plt        : { *(.rel.plt) }
-  .rela.plt       : { *(.rela.plt) }
-  .init           :
-  {
-    KEEP (*(.init))
-  } =0x47ff041f
-  .plt            : { *(.plt) }
-  .text           :
-  {
-    _ftext = . ;
-    *(.text .stub .text.* .gnu.linkonce.t.*)
-    KEEP (*(.text.*personality*))
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.mips16.fn.*) *(.mips16.call.*)
-  } =0x47ff041f
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } =0x47ff041f
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
-  .rodata1        : { *(.rodata1) }
-  .sdata2         :
-  {
-    *(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
-  }
-  .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN (0x40000) - ((0x40000 - .) & (0x40000 - 1)); . = DATA_SEGMENT_ALIGN (0x40000, 0x1000);
-  /* Exception handling  */
-  .eh_frame       : { KEEP (*(.eh_frame)) }
-  .gcc_except_table   : { *(.gcc_except_table .gcc_except_table.*) }
-  /* Thread Local Storage sections  */
-  .tdata         : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss                  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .preinit_array     :
-  {
-    PROVIDE (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE (__preinit_array_end = .);
-  }
-  .init_array     :
-  {
-     PROVIDE (__init_array_start = .);
-     KEEP (*(SORT(.init_array.*)))
-     KEEP (*(.init_array))
-     PROVIDE (__init_array_end = .);
-  }
-  .fini_array     :
-  {
-    PROVIDE (__fini_array_start = .);
-    KEEP (*(.fini_array))
-    KEEP (*(SORT(.fini_array.*)))
-    PROVIDE (__fini_array_end = .);
-  }
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin*.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  .dtors          :
-  {
-    KEEP (*crtbegin*.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  .jcr            : { KEEP (*(.jcr)) }
-  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }
-  . = DATA_SEGMENT_RELRO_END (0, .);
-  .data           :
-  {
-    _fdata = . ;
-    *(.data .data.* .gnu.linkonce.d.*)
-    KEEP (*(.gnu.linkonce.d.*personality*))
-    SORT(CONSTRUCTORS)
-  }
-  .data1          : { *(.data1) }
-  . = .;
-  _gp = ALIGN(16) + 0x7ff0;
-  .got            : { *(.got.plt) *(.got) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata          :
-  {
-    *(.sdata .sdata.* .gnu.linkonce.s.*)
-  }
-  .lit8           : { *(.lit8) }
-  .lit4           : { *(.lit4) }
-  _edata = .; PROVIDE (edata = .);
-  __bss_start = .;
-  _fbss = .;
-  .sbss           :
-  {
-    *(.dynsbss)
-    *(.sbss .sbss.* .gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss            :
-  {
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.
-      FIXME: Why do we need it? When there is no .bss section, we don't
-      pad the .data section.  */
-   . = ALIGN(. != 0 ? 32 / 8 : 1);
-  }
-  . = ALIGN(32 / 8);
-  . = ALIGN(32 / 8);
-  _end = .; PROVIDE (end = .);
-  . = DATA_SEGMENT_END (.);
-  /* Stabs debugging sections.  */
-  .stab          0 : { *(.stab) }
-  .stabstr       0 : { *(.stabstr) }
-  .stab.excl     0 : { *(.stab.excl) }
-  .stab.exclstr  0 : { *(.stab.exclstr) }
-  .stab.index    0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment       0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-  /DISCARD/ : { *(.note.GNU-stack) }
-}
diff --git a/ldscripts/ppc.ld b/ldscripts/ppc.ld
deleted file mode 100644
index 2a0dcad..0000000
--- a/ldscripts/ppc.ld
+++ /dev/null
@@ -1,237 +0,0 @@
-/* ld script to make i386 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- */
-OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", "elf32-powerpc")
-OUTPUT_ARCH(powerpc:common)
-ENTRY(_start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x60000000 + SIZEOF_HEADERS;
-  .interp     : { *(.interp) 	}
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .gnu.version   : { *(.gnu.version)	}
-  .gnu.version_d   : { *(.gnu.version_d)	}
-  .gnu.version_r   : { *(.gnu.version_r)	}
-  .rel.init       : { *(.rel.init) }
-  .rela.init      : { *(.rela.init) }
-  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
-  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
-  .rel.fini       : { *(.rel.fini) }
-  .rela.fini      : { *(.rela.fini) }
-  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
-  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
-  .rel.data.rel.ro   : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) }
-  .rela.data.rel.ro   : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) }
-  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
-  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
-  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
-  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
-  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
-  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
-  .rel.ctors      : { *(.rel.ctors) }
-  .rela.ctors     : { *(.rela.ctors) }
-  .rel.dtors      : { *(.rel.dtors) }
-  .rela.dtors     : { *(.rela.dtors) }
-  .rel.got        : { *(.rel.got) }
-  .rela.got       : { *(.rela.got) }
-  .rela.got1           : { *(.rela.got1) }
-  .rela.got2           : { *(.rela.got2) }
-  .rel.sdata      : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
-  .rela.sdata     : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
-  .rel.sbss       : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
-  .rela.sbss      : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
-  .rel.sdata2     : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
-  .rela.sdata2    : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
-  .rel.sbss2      : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
-  .rela.sbss2     : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
-  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
-  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
-  .rel.plt      :
-  {
-    *(.rel.plt)
-    PROVIDE (__rel_iplt_start = .);
-    *(.rel.iplt)
-    PROVIDE (__rel_iplt_end = .);
-  }
-  .rela.plt       :
-  {
-    *(.rela.plt)
-    PROVIDE (__rela_iplt_start = .);
-    *(.rela.iplt)
-    PROVIDE (__rela_iplt_end = .);
-  }
-  .init           :
-  {
-    KEEP (*(.init))
-  } =0
-  .text           :
-  {
-    *(.text .stub .text.* .gnu.linkonce.t.*)
-    KEEP (*(.text.*personality*))
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.glink)
-  } =0x47ff041f
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } =0x47ff041f
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
-  .rodata1        : { *(.rodata1) }
-  .sdata2         :
-  {
-    PROVIDE (_SDA2_BASE_ = 32768);
-    *(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
-  }
-  .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN (0x10000) - ((0x10000 - .) & (0x10000 - 1)); . = DATA_SEGMENT_ALIGN (0x10000, 0x1000);
-  /* Exception handling  */
-  .eh_frame       : { KEEP (*(.eh_frame)) }
-  .gcc_except_table   : { *(.gcc_except_table .gcc_except_table.*) }
-  /* Thread Local Storage sections  */
-  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .preinit_array     :
-  {
-    PROVIDE (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE (__preinit_array_end = .);
-  }
-  .init_array     :
-  {
-     PROVIDE (__init_array_start = .);
-     KEEP (*(SORT(.init_array.*)))
-     KEEP (*(.init_array))
-     PROVIDE (__init_array_end = .);
-  }
-  .fini_array     :
-  {
-    PROVIDE (__fini_array_start = .);
-    KEEP (*(.fini_array))
-    KEEP (*(SORT(.fini_array.*)))
-    PROVIDE (__fini_array_end = .);
-  }
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin*.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  .dtors          :
-  {
-    KEEP (*crtbegin*.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  .jcr            : { KEEP (*(.jcr)) }
-  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }
-  .got1           : { *(.got1) }
-  .got2           : { *(.got2) }
-  .dynamic        : { *(.dynamic) }
-  .got            : SPECIAL { *(.got) }
-  . = DATA_SEGMENT_RELRO_END (0, .);
-  .plt            : SPECIAL { *(.plt) }
-  .data           :
-  {
-    *(.data .data.* .gnu.linkonce.d.*)
-    KEEP (*(.gnu.linkonce.d.*personality*))
-    SORT(CONSTRUCTORS)
-  }
-  .data1          : { *(.data1) }
-  .got            : SPECIAL { *(.got) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata          :
-  {
-    PROVIDE (_SDA_BASE_ = 32768);
-    *(.sdata .sdata.* .gnu.linkonce.s.*)
-  }
-  _edata = .; PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss           :
-  {
-    PROVIDE (__sbss_start = .); PROVIDE (___sbss_start = .);
-    *(.dynsbss)
-    *(.sbss .sbss.* .gnu.linkonce.sb.*)
-    *(.scommon)
-    PROVIDE (__sbss_end = .); PROVIDE (___sbss_end = .);
-  }
-  .plt            : SPECIAL { *(.plt) }
-  .bss            :
-  {
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.
-      FIXME: Why do we need it? When there is no .bss section, we don't
-      pad the .data section.  */
-   . = ALIGN(. != 0 ? 32 / 8 : 1);
-  }
-  . = ALIGN(32 / 8);
-  . = ALIGN(32 / 8);
-  _end = .; PROVIDE (end = .);
-  . = DATA_SEGMENT_END (.);
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-  /DISCARD/    : { *(.fixup) }
-  /DISCARD/ : { *(.note.GNU-stack) }
-}
diff --git a/ldscripts/ppc64.ld b/ldscripts/ppc64.ld
deleted file mode 100644
index e2dafa0..0000000
--- a/ldscripts/ppc64.ld
+++ /dev/null
@@ -1,230 +0,0 @@
-/* Script for -z combreloc: combine and sort reloc sections */
-OUTPUT_FORMAT("elf64-powerpc", "elf64-powerpc",
-	      "elf64-powerpc")
-OUTPUT_ARCH(powerpc:common64)
-ENTRY(_start)
-/* __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  PROVIDE (__executable_start = 0x60000000); . = 0x60000000 + SIZEOF_HEADERS;
-  .interp         : { *(.interp) }
-  .hash           : { *(.hash) }
-  .dynsym         : { *(.dynsym) }
-  .dynstr         : { *(.dynstr) }
-  .gnu.version    : { *(.gnu.version) }
-  .gnu.version_d  : { *(.gnu.version_d) }
-  .gnu.version_r  : { *(.gnu.version_r) }
-  .rel.dyn        :
-    {
-      *(.rel.init)
-      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
-      *(.rel.fini)
-      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
-      *(.rel.data.rel.ro*)
-      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
-      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
-      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
-      *(.rel.ctors)
-      *(.rel.dtors)
-      *(.rel.got)
-      *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*)
-      *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*)
-      *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*)
-      *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*)
-      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
-    }
-  .rela.dyn       :
-    {
-      *(.rela.init)
-      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
-      *(.rela.fini)
-      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
-      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
-      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
-      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
-      *(.rela.ctors)
-      *(.rela.dtors)
-      *(.rela.got)
-      *(.rela.toc)
-      *(.rela.opd)
-      *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*)
-      *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*)
-      *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*)
-      *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*)
-      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
-    }
-  .rel.plt      :
-  {
-    *(.rel.plt)
-    PROVIDE (__rel_iplt_start = .);
-    *(.rel.iplt)
-    PROVIDE (__rel_iplt_end = .);
-  }
-  .rela.plt       :
-  {
-    *(.rela.plt)
-    PROVIDE (__rela_iplt_start = .);
-    *(.rela.iplt)
-    PROVIDE (__rela_iplt_end = .);
-  }
-  .rela.tocbss	  : { *(.rela.tocbss) }
-  .init           :
-  {
-    KEEP (*(.init))
-  } =0x60000000
-  .text           :
-  {
-    *(.text .stub .text.* .gnu.linkonce.t.*)
-    KEEP (*(.text.*personality*))
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.sfpr .glink)
-  } =0x60000000
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } =0x60000000
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
-  .rodata1        : { *(.rodata1) }
-  .sdata2         : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) }
-  .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN (0x10000) - ((0x10000 - .) & (0x10000 - 1)); . = DATA_SEGMENT_ALIGN
-(0x10000, 0x1000);   /* Exception handling  */
-  .eh_frame       : { KEEP (*(.eh_frame)) }
-  .gcc_except_table   : { KEEP (*(.gcc_except_table))
-*(.gcc_except_table.*) }   /* Thread Local Storage sections  */
-  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(64 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { KEEP (*(.preinit_array)) }
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { KEEP (*(.init_array)) }
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { KEEP (*(.fini_array)) }
-  PROVIDE (__fini_array_end = .);
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin*.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  .dtors          :
-  {
-    KEEP (*crtbegin*.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  .jcr            : { KEEP (*(.jcr)) }
-  .data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }
-  .dynamic        : { *(.dynamic) }
-  . = DATA_SEGMENT_RELRO_END (0, .);
-  .data           :
-  {
-    *(.data .data.* .gnu.linkonce.d.*)
-    KEEP (*(.gnu.linkonce.d.*personality*))
-    SORT(CONSTRUCTORS)
-  }
-  .data1          : { *(.data1) }
-  .toc1		 ALIGN(8) : { *(.toc1) }
-  .opd		 ALIGN(8) : { KEEP (*(.opd)) }
-  .got		ALIGN(8) : { *(.got .toc) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata          :
-  {
-    *(.sdata .sdata.* .gnu.linkonce.s.*)
-  }
-  _edata = .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .tocbss	 ALIGN(8) : { *(.tocbss)}
-  .sbss           :
-  {
-    PROVIDE (__sbss_start = .);
-    PROVIDE (___sbss_start = .);
-    *(.dynsbss)
-    *(.sbss .sbss.* .gnu.linkonce.sb.*)
-    *(.scommon)
-    PROVIDE (__sbss_end = .);
-    PROVIDE (___sbss_end = .);
-  }
-  .plt            : { *(.plt) }
-  .bss            :
-  {
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.  */
-   . = ALIGN(64 / 8);
-  }
-  . = ALIGN(64 / 8);
-  _end = .;
-  PROVIDE (end = .);
-  . = DATA_SEGMENT_END (.);
-  /* Stabs debugging sections.  */
-  .stab          0 : { *(.stab) }
-  .stabstr       0 : { *(.stabstr) }
-  .stab.excl     0 : { *(.stab.excl) }
-  .stab.exclstr  0 : { *(.stab.exclstr) }
-  .stab.index    0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment       0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /DISCARD/ : { *(.note.GNU-stack) }
-}
diff --git a/ldscripts/s390.ld b/ldscripts/s390.ld
deleted file mode 100644
index a9c5370..0000000
--- a/ldscripts/s390.ld
+++ /dev/null
@@ -1,201 +0,0 @@
-OUTPUT_FORMAT("elf32-s390", "elf32-s390",
-	      "elf32-s390")
-OUTPUT_ARCH(s390:31-bit)
-ENTRY(_start)
-/* __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x60000000 + SIZEOF_HEADERS;
-  .interp         : { *(.interp) }
-  .hash           : { *(.hash) }
-  .dynsym         : { *(.dynsym) }
-  .dynstr         : { *(.dynstr) }
-  .gnu.version    : { *(.gnu.version) }
-  .gnu.version_d  : { *(.gnu.version_d) }
-  .gnu.version_r  : { *(.gnu.version_r) }
-  .rel.dyn        :
-    {
-      *(.rel.init)
-      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
-      *(.rel.fini)
-      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
-      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
-      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
-      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
-      *(.rel.ctors)
-      *(.rel.dtors)
-      *(.rel.got)
-      *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*)
-      *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*)
-      *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*)
-      *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*)
-      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
-    }
-  .rela.dyn       :
-    {
-      *(.rela.init)
-      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
-      *(.rela.fini)
-      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
-      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
-      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
-      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
-      *(.rela.ctors)
-      *(.rela.dtors)
-      *(.rela.got)
-      *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*)
-      *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*)
-      *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*)
-      *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*)
-      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
-    }
-  .rel.plt        : { *(.rel.plt) }
-  .rela.plt       : { *(.rela.plt) }
-  .init           :
-  {
-    KEEP (*(.init))
-  } =0x07070707
-  .plt            : { *(.plt) }
-  .text           :
-  {
-    *(.text .stub .text.* .gnu.linkonce.t.*)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-  } =0x07070707
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } =0x07070707
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
-  .rodata1        : { *(.rodata1) }
-  .sdata2         : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) }
-  .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(0x1000) + (. & (0x1000 - 1));
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { *(.preinit_array) }
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { *(.init_array) }
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { *(.fini_array) }
-  PROVIDE (__fini_array_end = .);
-  .data           :
-  {
-    *(.data .data.* .gnu.linkonce.d.*)
-    SORT(CONSTRUCTORS)
-  }
-  .data1          : { *(.data1) }
-  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .eh_frame       : { KEEP (*(.eh_frame)) }
-  .gcc_except_table   : { *(.gcc_except_table) }
-  .dynamic        : { *(.dynamic) }
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  .jcr            : { KEEP (*(.jcr)) }
-  .got            : { *(.got.plt) *(.got) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata          :
-  {
-    *(.sdata .sdata.* .gnu.linkonce.s.*)
-  }
-  _edata = .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss           :
-  {
-    PROVIDE (__sbss_start = .);
-    PROVIDE (___sbss_start = .);
-    *(.dynsbss)
-    *(.sbss .sbss.* .gnu.linkonce.sb.*)
-    *(.scommon)
-    PROVIDE (__sbss_end = .);
-    PROVIDE (___sbss_end = .);
-  }
-  .bss            :
-  {
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.  */
-   . = ALIGN(32 / 8);
-  }
-  . = ALIGN(32 / 8);
-  _end = .;
-  PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab          0 : { *(.stab) }
-  .stabstr       0 : { *(.stabstr) }
-  .stab.excl     0 : { *(.stab.excl) }
-  .stab.exclstr  0 : { *(.stab.exclstr) }
-  .stab.index    0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment       0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/ldscripts/sparc.ld b/ldscripts/sparc.ld
deleted file mode 100644
index 56efe34..0000000
--- a/ldscripts/sparc.ld
+++ /dev/null
@@ -1,150 +0,0 @@
-OUTPUT_FORMAT("elf32-sparc", "elf32-sparc",
-              "elf32-sparc")
-OUTPUT_ARCH(sparc)
-ENTRY(_start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x60000000 + SIZEOF_HEADERS;
-  .interp     : { *(.interp)    }
-  .hash          : { *(.hash)           }
-  .dynsym        : { *(.dynsym)         }
-  .dynstr        : { *(.dynstr)         }
-  .gnu.version   : { *(.gnu.version)    }
-  .gnu.version_d   : { *(.gnu.version_d)        }
-  .gnu.version_r   : { *(.gnu.version_r)        }
-  .rel.text      :
-    { *(.rel.text) *(.rel.gnu.linkonce.t*) }
-  .rela.text     :
-    { *(.rela.text) *(.rela.gnu.linkonce.t*) }
-  .rel.data      :
-    { *(.rel.data) *(.rel.gnu.linkonce.d*) }
-  .rela.data     :
-    { *(.rela.data) *(.rela.gnu.linkonce.d*) }
-  .rel.rodata    :
-    { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
-  .rela.rodata   :
-    { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
-  .rel.got       : { *(.rel.got)                }
-  .rela.got      : { *(.rela.got)               }
-  .rel.ctors     : { *(.rel.ctors)      }
-  .rela.ctors    : { *(.rela.ctors)     }
-  .rel.dtors     : { *(.rel.dtors)      }
-  .rela.dtors    : { *(.rela.dtors)     }
-  .rel.init      : { *(.rel.init)       }
-  .rela.init     : { *(.rela.init)      }
-  .rel.fini      : { *(.rel.fini)       }
-  .rela.fini     : { *(.rela.fini)      }
-  .rel.bss       : { *(.rel.bss)                }
-  .rela.bss      : { *(.rela.bss)               }
-  .rel.plt       : { *(.rel.plt)                }
-  .rela.plt      : { *(.rela.plt)               }
-  .init          : { *(.init)   } =0x47ff041f
-  .text      :
-  {
-    *(.text)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-  } =0x47ff041f
-  _etext = .;
-  PROVIDE (etext = .);
-  .fini      : { *(.fini)    } =0x47ff041f
-  .rodata    : { *(.rodata) *(.gnu.linkonce.r*) }
-  .rodata1   : { *(.rodata1) }
-  .reginfo : { *(.reginfo) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(0x100000) + (. & (0x100000 - 1));
-  .data    :
-  {
-    *(.data)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-  }
-  .data1   : { *(.data1) }
-  .tdata    : { *(.tdata) }
-  .tbss    : { *(.tbss) }
-  .preinit_array     :
-  {
-    PROVIDE (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE (__preinit_array_end = .);
-  }
-  .init_array     :
-  {
-     PROVIDE (__init_array_start = .);
-     KEEP (*(SORT(.init_array.*)))
-     KEEP (*(.init_array))
-     PROVIDE (__init_array_end = .);
-  }
-  .fini_array     :
-  {
-    PROVIDE (__fini_array_start = .);
-    KEEP (*(.fini_array))
-    KEEP (*(SORT(.fini_array.*)))
-    PROVIDE (__fini_array_end = .);
-  }
-  .ctors         :
-  {
-    *(.ctors)
-  }
-  .dtors         :
-  {
-    *(.dtors)
-  }
-  .plt      : { *(.plt) }
-  .got           : { *(.got.plt) *(.got) }
-  .dynamic       : { *(.dynamic) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata     : { *(.sdata) }
-  _edata  =  .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss      : { *(.sbss) *(.scommon) }
-  .bss       :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-  /DISCARD/ : { *(.note.GNU-stack) *(.note.ABI-tag) }
-}
diff --git a/ldscripts/sparc64.ld b/ldscripts/sparc64.ld
deleted file mode 100644
index 9ea4143..0000000
--- a/ldscripts/sparc64.ld
+++ /dev/null
@@ -1,138 +0,0 @@
-OUTPUT_FORMAT("elf64-sparc", "elf64-sparc",
-              "elf64-sparc")
-OUTPUT_ARCH(sparc:v9)
-ENTRY(_start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x60000000 + SIZEOF_HEADERS;
-  .interp     : { *(.interp)    }
-  .hash          : { *(.hash)           }
-  .dynsym        : { *(.dynsym)         }
-  .dynstr        : { *(.dynstr)         }
-  .gnu.version   : { *(.gnu.version)    }
-  .gnu.version_d   : { *(.gnu.version_d)        }
-  .gnu.version_r   : { *(.gnu.version_r)        }
-  .rel.text      :
-    { *(.rel.text) *(.rel.gnu.linkonce.t*) }
-  .rela.text     :
-    { *(.rela.text) *(.rela.gnu.linkonce.t*) }
-  .rel.data      :
-    { *(.rel.data) *(.rel.gnu.linkonce.d*) }
-  .rela.data     :
-    { *(.rela.data) *(.rela.gnu.linkonce.d*) }
-  .rel.rodata    :
-    { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
-  .rela.rodata   :
-    { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
-  .rel.got       : { *(.rel.got)                }
-  .rela.got      : { *(.rela.got)               }
-  .rel.ctors     : { *(.rel.ctors)      }
-  .rela.ctors    : { *(.rela.ctors)     }
-  .rel.dtors     : { *(.rel.dtors)      }
-  .rela.dtors    : { *(.rela.dtors)     }
-  .rel.init      : { *(.rel.init)       }
-  .rela.init     : { *(.rela.init)      }
-  .rel.fini      : { *(.rel.fini)       }
-  .rela.fini     : { *(.rela.fini)      }
-  .rel.bss       : { *(.rel.bss)                }
-  .rela.bss      : { *(.rela.bss)               }
-  .rel.plt       : { *(.rel.plt)                }
-  .rela.plt      : { *(.rela.plt)               }
-  .init          : { *(.init)   } =0x47ff041f
-  .text      :
-  {
-    *(.text)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-  } =0x47ff041f
-  _etext = .;
-  PROVIDE (etext = .);
-  .fini      : { *(.fini)    } =0x47ff041f
-  .rodata    : { *(.rodata) *(.gnu.linkonce.r*) }
-  .rodata1   : { *(.rodata1) }
-  . = ALIGN(64 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { *(.preinit_array) }
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { *(.init_array) }
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { *(.fini_array) }
-  PROVIDE (__fini_array_end = .);
-  .reginfo : { *(.reginfo) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(0x100000) + (. & (0x100000 - 1));
-  .data    :
-  {
-    *(.gen_code)
-    *(.data)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-  }
-  .data1   : { *(.data1) }
-  .ctors         :
-  {
-    *(.ctors)
-  }
-  .dtors         :
-  {
-    *(.dtors)
-  }
-  .plt      : { *(.plt) }
-  .got           : { *(.got.plt) *(.got) }
-  .dynamic       : { *(.dynamic) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata     : { *(.sdata) }
-  _edata  =  .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss      : { *(.sbss) *(.scommon) }
-  .bss       :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-}
diff --git a/ldscripts/x86_64.ld b/ldscripts/x86_64.ld
deleted file mode 100644
index b7a9f4e..0000000
--- a/ldscripts/x86_64.ld
+++ /dev/null
@@ -1,180 +0,0 @@
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(_start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x60000000 + SIZEOF_HEADERS;
-  .interp         : { *(.interp) }
-  .hash           : { *(.hash) }
-  .dynsym         : { *(.dynsym) }
-  .dynstr         : { *(.dynstr) }
-  .gnu.version    : { *(.gnu.version) }
-  .gnu.version_d  : { *(.gnu.version_d) }
-  .gnu.version_r  : { *(.gnu.version_r) }
-  .rel.init       : { *(.rel.init) }
-  .rela.init      : { *(.rela.init) }
-  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
-  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
-  .rel.fini       : { *(.rel.fini) }
-  .rela.fini      : { *(.rela.fini) }
-  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
-  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
-  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
-  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
-  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
-  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
-  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
-  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
-  .rel.ctors      : { *(.rel.ctors) }
-  .rela.ctors     : { *(.rela.ctors) }
-  .rel.dtors      : { *(.rel.dtors) }
-  .rela.dtors     : { *(.rela.dtors) }
-  .rel.got        : { *(.rel.got) }
-  .rela.got       : { *(.rela.got) }
-  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
-  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
-  .rel.plt      :
-  {
-    *(.rel.plt)
-    PROVIDE (__rel_iplt_start = .);
-    *(.rel.iplt)
-    PROVIDE (__rel_iplt_end = .);
-  }
-  .rela.plt       :
-  {
-    *(.rela.plt)
-    PROVIDE (__rela_iplt_start = .);
-    *(.rela.iplt)
-    PROVIDE (__rela_iplt_end = .);
-  }
-  .init           :
-  {
-    KEEP (*(.init))
-  } =0x90909090
-  .plt            : { *(.plt) }
-  .text           :
-  {
-    *(.text .stub .text.* .gnu.linkonce.t.*)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-  } =0x90909090
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } =0x90909090
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
-  .rodata1        : { *(.rodata1) }
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN (0x100000) - ((0x100000 - .) & (0x100000 - 1)); . = DATA_SEGMENT_ALIGN (0x100000, 0x1000);
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(64 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { *(.preinit_array) }
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { *(.init_array) }
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { *(.fini_array) }
-  PROVIDE (__fini_array_end = .);
-  .data           :
-  {
-    *(.data .data.* .gnu.linkonce.d.*)
-    SORT(CONSTRUCTORS)
-  }
-  .data1          : { *(.data1) }
-  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .eh_frame       : { KEEP (*(.eh_frame)) }
-  .gcc_except_table   : { *(.gcc_except_table) }
-  .dynamic        : { *(.dynamic) }
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  .jcr            : { KEEP (*(.jcr)) }
-  .got            : { *(.got.plt) *(.got) }
-  _edata = .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .bss            :
-  {
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.  */
-   . = ALIGN(64 / 8);
-  }
-  . = ALIGN(64 / 8);
-  _end = .;
-  PROVIDE (end = .);
-  . = DATA_SEGMENT_END (.);
-  /* Stabs debugging sections.  */
-  .stab          0 : { *(.stab) }
-  .stabstr       0 : { *(.stabstr) }
-  .stab.excl     0 : { *(.stab.excl) }
-  .stab.exclstr  0 : { *(.stab.exclstr) }
-  .stab.index    0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment       0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
