Message ID | 1370674687-13849-9-git-send-email-xiawenc@linux.vnet.ibm.com |
---|---|
State | New |
Headers | show |
On Sat, 06/08 14:58, Wenchao Xia wrote: > This interface can generate snapshot name automatically if it is not > specified, since it is a single opertion. > > Snapshot ID can't be specified in this interface. > > Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> > --- > blockdev.c | 25 +++++++++++++++++++++++++ > qapi-schema.json | 21 +++++++++++++++++++++ > qmp-commands.hx | 31 +++++++++++++++++++++++++++++++ > 3 files changed, 77 insertions(+), 0 deletions(-) > > diff --git a/blockdev.c b/blockdev.c > index aaeb0e8..6a952cd 100644 > --- a/blockdev.c > +++ b/blockdev.c > @@ -777,6 +777,31 @@ void qmp_blockdev_snapshot_sync(const char *device, const char *snapshot_file, > &snapshot, errp); > } > > +void qmp_blockdev_snapshot_internal_sync(const char *device, > + bool has_name, const char *name, > + Error **errp) > +{ > + qemu_timeval tv; > + struct tm tm; > + char name1[128]; > + > + BlockdevSnapshotInternal snapshot = { > + .device = (char *) device, > + }; > + > + if (has_name) { > + snapshot.name = (char *) name; > + } else { > + qemu_gettimeofday(&tv); > + localtime_r((const time_t *)&tv.tv_sec, &tm); > + strftime(name1, sizeof(name1), "vm-%Y%m%d%H%M%S", &tm); > + snapshot.name = name1; > + } > + > + blockdev_do_action(TRANSACTION_ACTION_KIND_BLOCKDEV_SNAPSHOT_INTERNAL_SYNC, > + &snapshot, errp); > +} > + > > /* New and old BlockDriverState structs for group snapshots */ > > diff --git a/qapi-schema.json b/qapi-schema.json > index 9e143a8..fd2f8ce 100644 > --- a/qapi-schema.json > +++ b/qapi-schema.json > @@ -1689,6 +1689,27 @@ > '*mode': 'NewImageMode'} } > > ## > +# @blockdev-snapshot-internal-sync > +# > +# Generates a synchronous internal snapshot of a block device, when the format > +# of the image used support it. Confusing to say synchronous internal snapshot, "Synchronously take an internal snapshot" from below is better. And s/support/supports/. Maybe document the return value for unsupported format too? > +# > +# @device: the name of the device to generate the snapshot from > +# > +# @name: #optional the new snapshot name. If not specified, a name will be > +# generated according to time by qemu > +# > +# Returns: nothing on success > +# If @device is not a valid block device, DeviceNotFound > +# If any snapshot matching @name exist, or the name is a numeric which > +# may mess up with snapshot ID, generic error will be returned > +# > +# Since 1.6 > +## > +{ 'command': 'blockdev-snapshot-internal-sync', > + 'data': { 'device': 'str', '*name': 'str'} } > + > +## > # @human-monitor-command: > # > # Execute a command on the human monitor and return the output. > diff --git a/qmp-commands.hx b/qmp-commands.hx > index d31f518..e41e98a 100644 > --- a/qmp-commands.hx > +++ b/qmp-commands.hx > @@ -1044,6 +1044,37 @@ Example: > EQMP > > { > + .name = "blockdev-snapshot-internal-sync", > + .args_type = "device:B,name:s?", > + .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_internal_sync, > + }, > + > +SQMP > +blockdev-snapshot-internal-sync > +------------------------------- > + > +Synchronously take an internal snapshot of a block device when the format of > +image used support it. If name is not specified, it will be automatically I meant here: This is easier to understand. s/support/supports/ > +generated by qemu according to host time. If the name is a numeric string > +which may mess up with ID, such as "19", the operation will fail. If a > +snapshot with name already exist, the operation will fail. s/exist/exists/ > + > +Arguments: > + > +- "device": device name to snapshot (json-string) > +- "name": name of the new snapshot (json-string, optional) > + > +Example: > + > +-> { "execute": "blockdev-snapshot-internal-sync", > + "arguments": { "device": "ide-hd0", > + "name": "snapshot0" } > + } > +<- { "return": {} } > + > +EQMP > + > + { > .name = "drive-mirror", > .args_type = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?," > "on-source-error:s?,on-target-error:s?," > -- > 1.7.1 > > >
δΊ 2013-6-8 16:05, Fam Zheng ει: > On Sat, 06/08 14:58, Wenchao Xia wrote: >> This interface can generate snapshot name automatically if it is not >> specified, since it is a single opertion. >> >> Snapshot ID can't be specified in this interface. >> >> Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> >> --- >> blockdev.c | 25 +++++++++++++++++++++++++ >> qapi-schema.json | 21 +++++++++++++++++++++ >> qmp-commands.hx | 31 +++++++++++++++++++++++++++++++ >> 3 files changed, 77 insertions(+), 0 deletions(-) >> >> diff --git a/blockdev.c b/blockdev.c >> index aaeb0e8..6a952cd 100644 >> --- a/blockdev.c >> +++ b/blockdev.c >> @@ -777,6 +777,31 @@ void qmp_blockdev_snapshot_sync(const char *device, const char *snapshot_file, >> &snapshot, errp); >> } >> >> +void qmp_blockdev_snapshot_internal_sync(const char *device, >> + bool has_name, const char *name, >> + Error **errp) >> +{ >> + qemu_timeval tv; >> + struct tm tm; >> + char name1[128]; >> + >> + BlockdevSnapshotInternal snapshot = { >> + .device = (char *) device, >> + }; >> + >> + if (has_name) { >> + snapshot.name = (char *) name; >> + } else { >> + qemu_gettimeofday(&tv); >> + localtime_r((const time_t *)&tv.tv_sec, &tm); >> + strftime(name1, sizeof(name1), "vm-%Y%m%d%H%M%S", &tm); >> + snapshot.name = name1; >> + } >> + >> + blockdev_do_action(TRANSACTION_ACTION_KIND_BLOCKDEV_SNAPSHOT_INTERNAL_SYNC, >> + &snapshot, errp); >> +} >> + >> >> /* New and old BlockDriverState structs for group snapshots */ >> >> diff --git a/qapi-schema.json b/qapi-schema.json >> index 9e143a8..fd2f8ce 100644 >> --- a/qapi-schema.json >> +++ b/qapi-schema.json >> @@ -1689,6 +1689,27 @@ >> '*mode': 'NewImageMode'} } >> >> ## >> +# @blockdev-snapshot-internal-sync >> +# >> +# Generates a synchronous internal snapshot of a block device, when the format >> +# of the image used support it. > Confusing to say synchronous internal snapshot, "Synchronously take an > internal snapshot" from below is better. And s/support/supports/. Maybe > document the return value for unsupported format too? OK, will change it. >> +# >> +# @device: the name of the device to generate the snapshot from >> +# >> +# @name: #optional the new snapshot name. If not specified, a name will be >> +# generated according to time by qemu >> +# >> +# Returns: nothing on success >> +# If @device is not a valid block device, DeviceNotFound >> +# If any snapshot matching @name exist, or the name is a numeric which >> +# may mess up with snapshot ID, generic error will be returned >> +# >> +# Since 1.6 >> +## >> +{ 'command': 'blockdev-snapshot-internal-sync', >> + 'data': { 'device': 'str', '*name': 'str'} } >> + >> +## >> # @human-monitor-command: >> # >> # Execute a command on the human monitor and return the output. >> diff --git a/qmp-commands.hx b/qmp-commands.hx >> index d31f518..e41e98a 100644 >> --- a/qmp-commands.hx >> +++ b/qmp-commands.hx >> @@ -1044,6 +1044,37 @@ Example: >> EQMP >> >> { >> + .name = "blockdev-snapshot-internal-sync", >> + .args_type = "device:B,name:s?", >> + .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_internal_sync, >> + }, >> + >> +SQMP >> +blockdev-snapshot-internal-sync >> +------------------------------- >> + >> +Synchronously take an internal snapshot of a block device when the format of >> +image used support it. If name is not specified, it will be automatically > I meant here: This is easier to understand. > s/support/supports/ >> +generated by qemu according to host time. If the name is a numeric string >> +which may mess up with ID, such as "19", the operation will fail. If a >> +snapshot with name already exist, the operation will fail. > s/exist/exists/ Will change it, thanks for examination. >> + >> +Arguments: >> + >> +- "device": device name to snapshot (json-string) >> +- "name": name of the new snapshot (json-string, optional) >> + >> +Example: >> + >> +-> { "execute": "blockdev-snapshot-internal-sync", >> + "arguments": { "device": "ide-hd0", >> + "name": "snapshot0" } >> + } >> +<- { "return": {} } >> + >> +EQMP >> + >> + { >> .name = "drive-mirror", >> .args_type = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?," >> "on-source-error:s?,on-target-error:s?," >> -- >> 1.7.1 >> >> >> >
diff --git a/blockdev.c b/blockdev.c index aaeb0e8..6a952cd 100644 --- a/blockdev.c +++ b/blockdev.c @@ -777,6 +777,31 @@ void qmp_blockdev_snapshot_sync(const char *device, const char *snapshot_file, &snapshot, errp); } +void qmp_blockdev_snapshot_internal_sync(const char *device, + bool has_name, const char *name, + Error **errp) +{ + qemu_timeval tv; + struct tm tm; + char name1[128]; + + BlockdevSnapshotInternal snapshot = { + .device = (char *) device, + }; + + if (has_name) { + snapshot.name = (char *) name; + } else { + qemu_gettimeofday(&tv); + localtime_r((const time_t *)&tv.tv_sec, &tm); + strftime(name1, sizeof(name1), "vm-%Y%m%d%H%M%S", &tm); + snapshot.name = name1; + } + + blockdev_do_action(TRANSACTION_ACTION_KIND_BLOCKDEV_SNAPSHOT_INTERNAL_SYNC, + &snapshot, errp); +} + /* New and old BlockDriverState structs for group snapshots */ diff --git a/qapi-schema.json b/qapi-schema.json index 9e143a8..fd2f8ce 100644 --- a/qapi-schema.json +++ b/qapi-schema.json @@ -1689,6 +1689,27 @@ '*mode': 'NewImageMode'} } ## +# @blockdev-snapshot-internal-sync +# +# Generates a synchronous internal snapshot of a block device, when the format +# of the image used support it. +# +# @device: the name of the device to generate the snapshot from +# +# @name: #optional the new snapshot name. If not specified, a name will be +# generated according to time by qemu +# +# Returns: nothing on success +# If @device is not a valid block device, DeviceNotFound +# If any snapshot matching @name exist, or the name is a numeric which +# may mess up with snapshot ID, generic error will be returned +# +# Since 1.6 +## +{ 'command': 'blockdev-snapshot-internal-sync', + 'data': { 'device': 'str', '*name': 'str'} } + +## # @human-monitor-command: # # Execute a command on the human monitor and return the output. diff --git a/qmp-commands.hx b/qmp-commands.hx index d31f518..e41e98a 100644 --- a/qmp-commands.hx +++ b/qmp-commands.hx @@ -1044,6 +1044,37 @@ Example: EQMP { + .name = "blockdev-snapshot-internal-sync", + .args_type = "device:B,name:s?", + .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_internal_sync, + }, + +SQMP +blockdev-snapshot-internal-sync +------------------------------- + +Synchronously take an internal snapshot of a block device when the format of +image used support it. If name is not specified, it will be automatically +generated by qemu according to host time. If the name is a numeric string +which may mess up with ID, such as "19", the operation will fail. If a +snapshot with name already exist, the operation will fail. + +Arguments: + +- "device": device name to snapshot (json-string) +- "name": name of the new snapshot (json-string, optional) + +Example: + +-> { "execute": "blockdev-snapshot-internal-sync", + "arguments": { "device": "ide-hd0", + "name": "snapshot0" } + } +<- { "return": {} } + +EQMP + + { .name = "drive-mirror", .args_type = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?," "on-source-error:s?,on-target-error:s?,"
This interface can generate snapshot name automatically if it is not specified, since it is a single opertion. Snapshot ID can't be specified in this interface. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> --- blockdev.c | 25 +++++++++++++++++++++++++ qapi-schema.json | 21 +++++++++++++++++++++ qmp-commands.hx | 31 +++++++++++++++++++++++++++++++ 3 files changed, 77 insertions(+), 0 deletions(-)