@@ -16,44 +16,13 @@
#include "hw/virtio/virtio.h"
#include "hw/pci/pci.h"
+#include "linux/virtio_net.h"
+#include "linux/virtio_ids.h"
#define TYPE_VIRTIO_NET "virtio-net-device"
#define VIRTIO_NET(obj) \
OBJECT_CHECK(VirtIONet, (obj), TYPE_VIRTIO_NET)
-#define ETH_ALEN 6
-
-/* from Linux's virtio_net.h */
-
-/* The ID for virtio_net */
-#define VIRTIO_ID_NET 1
-
-/* The feature bitmap for virtio net */
-#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
-#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
-#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
-#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
-#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
-#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
-#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
-#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
-#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
-#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
-#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
-#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
-#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
-#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
-#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
-#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
-#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
- * Steering */
-
-#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
-
-#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
-
#define TX_TIMER_INTERVAL 150000 /* 150 us */
/* Limit the number of packets that can be sent via a single flush
@@ -73,72 +42,6 @@ typedef struct virtio_net_conf
/* Maximum packet size we can receive from tap device: header + 64k */
#define VIRTIO_NET_MAX_BUFSIZE (sizeof(struct virtio_net_hdr) + (64 << 10))
-struct virtio_net_config
-{
- /* The config defining mac address ($ETH_ALEN bytes) */
- uint8_t mac[ETH_ALEN];
- /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
- uint16_t status;
- /* Max virtqueue pairs supported by the device */
- uint16_t max_virtqueue_pairs;
-} QEMU_PACKED;
-
-/*
- * Control virtqueue data structures
- *
- * The control virtqueue expects a header in the first sg entry
- * and an ack/status response in the last entry. Data for the
- * command goes in between.
- */
-struct virtio_net_ctrl_hdr {
- uint8_t class;
- uint8_t cmd;
-};
-
-typedef uint8_t virtio_net_ctrl_ack;
-
-#define VIRTIO_NET_OK 0
-#define VIRTIO_NET_ERR 1
-
-/*
- * Control the RX mode, ie. promisucous, allmulti, etc...
- * All commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable. Commands
- * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
- * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
- */
-#define VIRTIO_NET_CTRL_RX 0
- #define VIRTIO_NET_CTRL_RX_PROMISC 0
- #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
- #define VIRTIO_NET_CTRL_RX_ALLUNI 2
- #define VIRTIO_NET_CTRL_RX_NOMULTI 3
- #define VIRTIO_NET_CTRL_RX_NOUNI 4
- #define VIRTIO_NET_CTRL_RX_NOBCAST 5
-
-/*
- * Control the MAC
- *
- * The MAC filter table is managed by the hypervisor, the guest should
- * assume the size is infinite. Filtering should be considered
- * non-perfect, ie. based on hypervisor resources, the guest may
- * received packets from sources not specified in the filter list.
- *
- * In addition to the class/cmd header, the TABLE_SET command requires
- * two out scatterlists. Each contains a 4 byte count of entries followed
- * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
- * first sg list contains unicast addresses, the second is for multicast.
- * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
- * is available.
- *
- * The ADDR_SET command requests one out scatterlist, it contains a
- * 6 bytes MAC address. This functionality is present if the
- * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
- */
-struct virtio_net_ctrl_mac {
- uint32_t entries;
- uint8_t macs[][ETH_ALEN];
-};
-
typedef struct VirtIONetQueue {
VirtQueue *rx_vq;
VirtQueue *tx_vq;
@@ -192,43 +95,6 @@ typedef struct VirtIONet {
char *netclient_type;
} VirtIONet;
-#define VIRTIO_NET_CTRL_MAC 1
- #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
- #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
-
-/*
- * Control VLAN filtering
- *
- * The VLAN filter table is controlled via a simple ADD/DEL interface.
- * VLAN IDs not added may be filterd by the hypervisor. Del is the
- * opposite of add. Both commands expect an out entry containing a 2
- * byte VLAN ID. VLAN filterting is available with the
- * VIRTIO_NET_F_CTRL_VLAN feature bit.
- */
-#define VIRTIO_NET_CTRL_VLAN 2
- #define VIRTIO_NET_CTRL_VLAN_ADD 0
- #define VIRTIO_NET_CTRL_VLAN_DEL 1
-
-/*
- * Control Multiqueue
- *
- * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
- * enables multiqueue, specifying the number of the transmit and
- * receive queues that will be used. After the command is consumed and acked by
- * the device, the device will not steer new packets on receive virtqueues
- * other than specified nor read from transmit virtqueues other than specified.
- * Accordingly, driver should not transmit new packets on virtqueues other than
- * specified.
- */
-struct virtio_net_ctrl_mq {
- uint16_t virtqueue_pairs;
-};
-
-#define VIRTIO_NET_CTRL_MQ 4
- #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
- #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
- #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
-
#define DEFINE_VIRTIO_NET_FEATURES(_state, _field) \
DEFINE_VIRTIO_COMMON_FEATURES(_state, _field), \
DEFINE_PROP_BIT("csum", _state, _field, VIRTIO_NET_F_CSUM, true), \
@@ -26,13 +26,12 @@
#ifndef QEMU_ETH_H
#define QEMU_ETH_H
+#include <linux/if_ether.h>
#include <sys/types.h>
#include <string.h>
#include "qemu/bswap.h"
#include "qemu/iov.h"
-#define ETH_ALEN 6
-
struct eth_header {
uint8_t h_dest[ETH_ALEN]; /* destination eth addr */
uint8_t h_source[ETH_ALEN]; /* source ether addr */
@@ -170,8 +169,6 @@ struct tcp_hdr {
#define IP_HEADER_VERSION(ip) \
((ip->ip_ver_len >> 4)&0xf)
-#define ETH_P_IP (0x0800)
-#define ETH_P_IPV6 (0x86dd)
#define ETH_P_VLAN (0x8100)
#define ETH_P_DVLAN (0x88a8)
#define VLAN_VID_MASK 0x0fff
@@ -28,6 +28,7 @@
#include "qemu-common.h"
#include "qapi-types.h"
+#include "linux/virtio_net.h"
bool tap_has_ufo(NetClientState *nc);
int tap_has_vnet_hdr(NetClientState *nc);
@@ -43,27 +44,4 @@ int tap_get_fd(NetClientState *nc);
struct vhost_net;
struct vhost_net *tap_get_vhost_net(NetClientState *nc);
-struct virtio_net_hdr
-{
-#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
-#define VIRTIO_NET_HDR_F_DATA_VALID 2 // Csum is valid
- uint8_t flags;
-#define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
-#define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO)
-#define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO)
-#define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP
-#define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
- uint8_t gso_type;
- uint16_t hdr_len;
- uint16_t gso_size;
- uint16_t csum_start;
- uint16_t csum_offset;
-};
-
-struct virtio_net_hdr_mrg_rxbuf
-{
- struct virtio_net_hdr hdr;
- uint16_t num_buffers; /* Number of merged rx buffers */
-};
-
#endif /* QEMU_NET_TAP_H */
new file mode 100644
@@ -0,0 +1,140 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Global definitions for the Ethernet IEEE 802.3 interface.
+ *
+ * Version: @(#)if_ether.h 1.0.1a 02/08/94
+ *
+ * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ * Donald Becker, <becker@super.org>
+ * Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ * Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IF_ETHER_H
+#define _LINUX_IF_ETHER_H
+
+#include <linux/types.h>
+
+/*
+ * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
+ * and FCS/CRC (frame check sequence).
+ */
+
+#define ETH_ALEN 6 /* Octets in one ethernet addr */
+#define ETH_HLEN 14 /* Total octets in header. */
+#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN 1500 /* Max. octets in payload */
+#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
+#define ETH_FCS_LEN 4 /* Octets in the FCS */
+
+/*
+ * These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
+#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
+#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
+#define ETH_P_IP 0x0800 /* Internet Protocol packet */
+#define ETH_P_X25 0x0805 /* CCITT X.25 */
+#define ETH_P_ARP 0x0806 /* Address Resolution packet */
+#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */
+#define ETH_P_BATMAN 0x4305 /* B.A.T.M.A.N.-Advanced packet [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
+#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
+#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
+#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
+#define ETH_P_LAT 0x6004 /* DEC LAT */
+#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
+#define ETH_P_CUST 0x6006 /* DEC Customer use */
+#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
+#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */
+#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
+#define ETH_P_ATALK 0x809B /* Appletalk DDP */
+#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
+#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
+#define ETH_P_IPX 0x8137 /* IPX over DIX */
+#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
+#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */
+#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */
+#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol
+ * defined in draft-wilson-wrec-wccp-v2-00.txt */
+#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
+#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
+#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */
+#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */
+#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
+#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */
+#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
+ * over Ethernet
+ */
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
+#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */
+#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */
+#define ETH_P_TIPC 0x88CA /* TIPC */
+#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */
+#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */
+#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */
+#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
+#define ETH_P_TDLS 0x890D /* TDLS */
+#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
+#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
+
+#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is less than this value
+ * then the frame is Ethernet II. Else it is 802.3 */
+
+/*
+ * Non DIX types. Won't clash for 1500 types.
+ */
+
+#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
+#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
+#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
+#define ETH_P_802_2 0x0004 /* 802.2 frames */
+#define ETH_P_SNAP 0x0005 /* Internal only */
+#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
+#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
+#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */
+#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/
+#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
+#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
+#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
+#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
+#define ETH_P_ECONET 0x0018 /* Acorn Econet */
+#define ETH_P_HDLC 0x0019 /* HDLC frames */
+#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */
+#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */
+#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */
+#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */
+#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */
+#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */
+
+/*
+ * This is an Ethernet frame header.
+ */
+
+struct ethhdr {
+ unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
+ unsigned char h_source[ETH_ALEN]; /* source ether addr */
+ __be16 h_proto; /* packet type ID field */
+} __attribute__((packed));
+
+
+#endif /* _LINUX_IF_ETHER_H */
new file mode 100644
@@ -0,0 +1,202 @@
+#ifndef _LINUX_VIRTIO_NET_H
+#define _LINUX_VIRTIO_NET_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+#include <linux/if_ether.h>
+
+/* The feature bitmap for virtio net */
+#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
+#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
+#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
+#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
+#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
+#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
+#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
+#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
+#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
+#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
+#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
+#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
+#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
+#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
+#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
+#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
+ * network */
+#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
+ * Steering */
+#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
+
+#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
+#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
+
+struct virtio_net_config {
+ /* The config defining mac address (if VIRTIO_NET_F_MAC) */
+ __u8 mac[6];
+ /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
+ __u16 status;
+ /* Maximum number of each of transmit and receive queues;
+ * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ.
+ * Legal values are between 1 and 0x8000
+ */
+ __u16 max_virtqueue_pairs;
+} __attribute__((packed));
+
+/* This is the first element of the scatter-gather list. If you don't
+ * specify GSO or CSUM features, you can simply ignore the header. */
+struct virtio_net_hdr {
+#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
+#define VIRTIO_NET_HDR_F_DATA_VALID 2 // Csum is valid
+ __u8 flags;
+#define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
+#define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO)
+#define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO)
+#define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP
+#define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
+ __u8 gso_type;
+ __u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
+ __u16 gso_size; /* Bytes to append to hdr_len per frame */
+ __u16 csum_start; /* Position to start checksumming from */
+ __u16 csum_offset; /* Offset after that to place checksum */
+};
+
+/* This is the version of the header to use when the MRG_RXBUF
+ * feature has been negotiated. */
+struct virtio_net_hdr_mrg_rxbuf {
+ struct virtio_net_hdr hdr;
+ __u16 num_buffers; /* Number of merged rx buffers */
+};
+
+/*
+ * Control virtqueue data structures
+ *
+ * The control virtqueue expects a header in the first sg entry
+ * and an ack/status response in the last entry. Data for the
+ * command goes in between.
+ */
+struct virtio_net_ctrl_hdr {
+ __u8 class;
+ __u8 cmd;
+} __attribute__((packed));
+
+typedef __u8 virtio_net_ctrl_ack;
+
+#define VIRTIO_NET_OK 0
+#define VIRTIO_NET_ERR 1
+
+/*
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable. Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
+ */
+#define VIRTIO_NET_CTRL_RX 0
+ #define VIRTIO_NET_CTRL_RX_PROMISC 0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI 2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI 3
+ #define VIRTIO_NET_CTRL_RX_NOUNI 4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST 5
+
+/*
+ * Control the MAC
+ *
+ * The MAC filter table is managed by the hypervisor, the guest should
+ * assume the size is infinite. Filtering should be considered
+ * non-perfect, ie. based on hypervisor resources, the guest may
+ * received packets from sources not specified in the filter list.
+ *
+ * In addition to the class/cmd header, the TABLE_SET command requires
+ * two out scatterlists. Each contains a 4 byte count of entries followed
+ * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
+ * first sg list contains unicast addresses, the second is for multicast.
+ * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
+ * is available.
+ *
+ * The ADDR_SET command requests one out scatterlist, it contains a
+ * 6 bytes MAC address. This functionality is present if the
+ * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
+ */
+struct virtio_net_ctrl_mac {
+ __u32 entries;
+ __u8 macs[][ETH_ALEN];
+} __attribute__((packed));
+
+#define VIRTIO_NET_CTRL_MAC 1
+ #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
+ #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
+
+/*
+ * Control VLAN filtering
+ *
+ * The VLAN filter table is controlled via a simple ADD/DEL interface.
+ * VLAN IDs not added may be filterd by the hypervisor. Del is the
+ * opposite of add. Both commands expect an out entry containing a 2
+ * byte VLAN ID. VLAN filterting is available with the
+ * VIRTIO_NET_F_CTRL_VLAN feature bit.
+ */
+#define VIRTIO_NET_CTRL_VLAN 2
+ #define VIRTIO_NET_CTRL_VLAN_ADD 0
+ #define VIRTIO_NET_CTRL_VLAN_DEL 1
+
+/*
+ * Control link announce acknowledgement
+ *
+ * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
+ * driver has recevied the notification; device would clear the
+ * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
+ * this command.
+ */
+#define VIRTIO_NET_CTRL_ANNOUNCE 3
+ #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
+
+/*
+ * Control Receive Flow Steering
+ *
+ * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
+ * enables Receive Flow Steering, specifying the number of the transmit and
+ * receive queues that will be used. After the command is consumed and acked by
+ * the device, the device will not steer new packets on receive virtqueues
+ * other than specified nor read from transmit virtqueues other than specified.
+ * Accordingly, driver should not transmit new packets on virtqueues other than
+ * specified.
+ */
+struct virtio_net_ctrl_mq {
+ __u16 virtqueue_pairs;
+};
+
+#define VIRTIO_NET_CTRL_MQ 4
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
+
+#endif /* _LINUX_VIRTIO_NET_H */
It's easier to keep everything virtio in sync if we just use headers exported from linux kernel. Import linux/virtio_net.h and linux/if_ether.h that it depends on. Switch to symbols from that header for stuff that was duplicated in tap.h and eth.h Signed-off-by: Michael S. Tsirkin <mst@redhat.com> --- include/hw/virtio/virtio-net.h | 138 +------------------------- include/net/eth.h | 5 +- include/net/tap.h | 24 +---- linux-headers/linux/if_ether.h | 140 +++++++++++++++++++++++++++ linux-headers/linux/virtio_net.h | 202 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 346 insertions(+), 163 deletions(-) create mode 100644 linux-headers/linux/if_ether.h create mode 100644 linux-headers/linux/virtio_net.h