diff --git a/configure b/configure
index 994f731..e8ae685 100755
--- a/configure
+++ b/configure
@@ -2802,7 +2802,7 @@ fi
 
 # check for usbredirparser for usb network redirection support
 if test "$usb_redir" != "no" ; then
-    if $pkg_config --atleast-version=0.5.3 libusbredirparser-0.5 >/dev/null 2>&1 ; then
+    if $pkg_config --atleast-version=0.6 libusbredirparser-0.5 >/dev/null 2>&1 ; then
         usb_redir="yes"
         usb_redir_cflags=$($pkg_config --cflags libusbredirparser-0.5 2>/dev/null)
         usb_redir_libs=$($pkg_config --libs libusbredirparser-0.5 2>/dev/null)
diff --git a/hw/usb.h b/hw/usb.h
index 21caa54..8bd5df6 100644
--- a/hw/usb.h
+++ b/hw/usb.h
@@ -553,5 +553,15 @@ const USBDesc *usb_device_get_usb_desc(USBDevice *dev);
 
 int ehci_create_ich9_with_companions(PCIBus *bus, int slot);
 
-#endif
+/* quirks.c */
+
+/* In bulk endpoints are streaming data sources (iow behave like isoc eps) */
+#define USB_QUIRK_BUFFER_BULK_IN	0x01
+/* Bulk pkts in FTDI format, need special handling when combining packets */
+#define USB_QUIRK_IS_FTDI		0x02
 
+int usb_get_quirks(uint16_t vendor_id, uint16_t product_id,
+                   uint8_t interface_class, uint8_t interface_subclass,
+                   uint8_t interface_protocol);
+
+#endif
diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
index 5a4eeb6..dad4cb9 100644
--- a/hw/usb/Makefile.objs
+++ b/hw/usb/Makefile.objs
@@ -5,7 +5,7 @@ common-obj-$(CONFIG_USB_XHCI) += hcd-xhci.o
 common-obj-y += libhw.o
 
 common-obj-$(CONFIG_SMARTCARD) += dev-smartcard-reader.o
-common-obj-$(CONFIG_USB_REDIR) += redirect.o
+common-obj-$(CONFIG_USB_REDIR) += redirect.o quirks.o
 
 common-obj-y += core.o combined-packet.o bus.o desc.o dev-hub.o
 common-obj-y += host-$(HOST_USB).o dev-bluetooth.o
diff --git a/hw/usb/quirks-ftdi-ids.h b/hw/usb/quirks-ftdi-ids.h
new file mode 100644
index 0000000..57c12ef
--- /dev/null
+++ b/hw/usb/quirks-ftdi-ids.h
@@ -0,0 +1,1255 @@
+/*
+ * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters.
+ * Please keep numerically sorted within individual areas, thanks!
+ *
+ * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
+ * from Rudolf Gugler
+ *
+ */
+
+
+/**********************************/
+/***** devices using FTDI VID *****/
+/**********************************/
+
+
+#define FTDI_VID	0x0403	/* Vendor Id */
+
+
+/*** "original" FTDI device PIDs ***/
+
+#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
+#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
+#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
+#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
+#define FTDI_232H_PID  0x6014 /* Single channel hi-speed device */
+#define FTDI_FTX_PID   0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */
+#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
+#define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
+
+
+/*** third-party PIDs (using FTDI_VID) ***/
+
+#define FTDI_LUMEL_PD12_PID	0x6002
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID	0x9e90
+
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
+/*
+ * Texas Instruments XDS100v2 JTAG / BeagleBone A3
+ * http://processors.wiki.ti.com/index.php/XDS100
+ * http://beagleboard.org/bone
+ */
+#define TI_XDS100V2_PID		0xa6d0
+
+#define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
+
+/* US Interface Navigator (http://www.usinterface.com/) */
+#define FTDI_USINT_CAT_PID	0xb810	/* Navigator CAT and 2nd PTT lines */
+#define FTDI_USINT_WKEY_PID	0xb811	/* Navigator WKEY and FSK lines */
+#define FTDI_USINT_RS232_PID	0xb812	/* Navigator RS232 and CONFIG lines */
+
+/* OOCDlink by Joern Kaipf <joernk@web.de>
+ * (http://www.joernonline.de/) */
+#define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
+
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
+#define LMI_LM3S_ICDI_BOARD_PID		0xbcda
+
+#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
+
+/* OpenDCC (www.opendcc.de) product id */
+#define FTDI_OPENDCC_PID	0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID	0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID	0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
+#define FTDI_OPENDCC_GBM_PID	0xBFDC
+
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID	0xC1E0	/* NZR SEM-LOG16+ */
+
+/*
+ * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ */
+#define FTDI_RRCIRKITS_LOCOBUFFER_PID	0xc7d0	/* LocoBuffer USB */
+
+/* DMX4ALL DMX Interfaces */
+#define FTDI_DMX4ALL 0xC850
+
+/*
+ * ASK.fr devices
+ */
+#define FTDI_ASK_RDR400_PID	0xC991	/* ASK RDR 400 series card reader */
+
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID	0xCAA0	/* Product Id */
+
+/*
+ * Tactrix OpenPort (ECU) devices.
+ * OpenPort 1.3M submitted by Donour Sizemore.
+ * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
+ */
+#define FTDI_TACTRIX_OPENPORT_13M_PID	0xCC48	/* OpenPort 1.3 Mitsubishi */
+#define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
+#define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
+
+#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID	0xCFF8
+
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011    /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
+/* iPlus device */
+#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
+
+/*
+ * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
+ */
+#define FTDI_GAMMA_SCOUT_PID		0xD678	/* Gamma Scout online */
+
+/* Propox devices */
+#define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
+#define FTDI_PROPOX_ISPCABLEIII_PID	0xD739
+
+/* Lenz LI-USB Computer Interface. */
+#define FTDI_LENZ_LIUSB_PID	0xD780
+
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID	0xF070
+
+/*
+ * Xsens Technologies BV products (http://www.xsens.com).
+ */
+#define XSENS_CONVERTER_0_PID	0xD388
+#define XSENS_CONVERTER_1_PID	0xD389
+#define XSENS_CONVERTER_2_PID	0xD38A
+#define XSENS_CONVERTER_3_PID	0xD38B
+#define XSENS_CONVERTER_4_PID	0xD38C
+#define XSENS_CONVERTER_5_PID	0xD38D
+#define XSENS_CONVERTER_6_PID	0xD38E
+#define XSENS_CONVERTER_7_PID	0xD38F
+
+/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID		0xDA70	/* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID	0xDA71	/* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID		0xDA72	/* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID		0xDA73	/* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
+
+/*
+ * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs
+ */
+#define FTDI_CHAMSYS_24_MASTER_WING_PID        0xDAF8
+#define FTDI_CHAMSYS_PC_WING_PID       0xDAF9
+#define FTDI_CHAMSYS_USB_DMX_PID       0xDAFA
+#define FTDI_CHAMSYS_MIDI_TIMECODE_PID 0xDAFB
+#define FTDI_CHAMSYS_MINI_WING_PID     0xDAFC
+#define FTDI_CHAMSYS_MAXI_WING_PID     0xDAFD
+#define FTDI_CHAMSYS_MEDIA_WING_PID    0xDAFE
+#define FTDI_CHAMSYS_WING_PID  0xDAFF
+
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID	0xDC01	/* Model 8900F */
+
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) */
+
+/*
+ * Definitions for Artemis astronomical USB based cameras
+ * Check it at http://www.artemisccd.co.uk/
+ */
+#define FTDI_ARTEMIS_PID	0xDF28	/* All Artemis Cameras */
+
+/*
+ * Definitions for ATIK Instruments astronomical USB based cameras
+ * Check it at http://www.atik-instruments.com/
+ */
+#define FTDI_ATIK_ATK16_PID	0xDF30	/* ATIK ATK-16 Grayscale Camera */
+#define FTDI_ATIK_ATK16C_PID	0xDF32	/* ATIK ATK-16C Colour Camera */
+#define FTDI_ATIK_ATK16HR_PID	0xDF31	/* ATIK ATK-16HR Grayscale Camera */
+#define FTDI_ATIK_ATK16HRC_PID	0xDF33	/* ATIK ATK-16HRC Colour Camera */
+#define FTDI_ATIK_ATK16IC_PID   0xDF35  /* ATIK ATK-16IC Grayscale Camera */
+
+/*
+ * Yost Engineering, Inc. products (www.yostengineering.com).
+ * PID 0xE050 submitted by Aaron Prose.
+ */
+#define FTDI_YEI_SERVOCENTER31_PID	0xE050	/* YEI ServoCenter3.1 USB */
+
+/*
+ * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
+ * All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
+ *
+ * The previously included PID for the UO 100 module was incorrect.
+ * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
+ *
+ * Armin Laeuger originally sent the PID for the UM 100 module.
+ */
+#define FTDI_ELV_USR_PID	0xE000	/* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID	0xE001	/* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID	0xE002	/* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID	0xE004	/* WS 550 */
+#define FTDI_ELV_EC3000_PID	0xE006	/* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID	0xE008	/* WS 888 */
+#define FTDI_ELV_TWS550_PID	0xE009	/* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID	0xE00A	/* Funk Energie Monitor */
+#define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
+#define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID	0xE0EB	/* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
+#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Energy monitor EM 1010 PC */
+#define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
+#define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
+#define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
+#define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
+#define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID	0xE0F5	/* ELV UTP 8 */
+#define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID	0xE0F7	/* Conrad WS 444 PC */
+#define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
+#define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
+#define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
+#define FTDI_ELV_USI2_PID	0xF06A	/* USB-Schrittmotoren-Interface (USI 2) */
+#define FTDI_ELV_T1100_PID	0xF06B	/* Thermometer (T 1100) */
+#define FTDI_ELV_PCD200_PID	0xF06C	/* PC-Datenlogger (PCD 200) */
+#define FTDI_ELV_ULA200_PID	0xF06D	/* USB-LCD-Ansteuerung (ULA 200) */
+#define FTDI_ELV_ALC8500_PID	0xF06E	/* ALC 8500 Expert */
+#define FTDI_ELV_FHZ1000PC_PID	0xF06F	/* FHZ 1000 PC */
+#define FTDI_ELV_UR100_PID	0xFB58	/* USB-RS232-Umsetzer (UR 100) */
+#define FTDI_ELV_UM100_PID	0xFB5A	/* USB-Modul UM 100 */
+#define FTDI_ELV_UO100_PID	0xFB5B	/* USB-Modul UO 100 */
+/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
+ * MS Windows, rather than the FTDI Virtual Com Port drivers.
+ * Maybe these will be easier to use with the libftdi/libusb user-space
+ * drivers, or possibly the Comedi drivers in some cases. */
+#define FTDI_ELV_CLI7000_PID	0xFB59	/* Computer-Light-Interface (CLI 7000) */
+#define FTDI_ELV_PPS7330_PID	0xFB5C	/* Processor-Power-Supply (PPS 7330) */
+#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperatur-Feuchte-Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkuhr (UDF 77) */
+#define FTDI_ELV_UIO88_PID	0xFB5F	/* USB-I/O Interface (UIO 88) */
+
+/*
+ * EVER Eco Pro UPS (http://www.ever.com.pl/)
+ */
+
+#define	EVER_ECO_PRO_CDS	0xe520	/* RS-232 converter */
+
+/*
+ * Active Robots product ids.
+ */
+#define FTDI_ACTIVE_ROBOTS_PID	0xE548	/* USB comms board */
+
+/* Pyramid Computer GmbH */
+#define FTDI_PYRAMID_PID	0xE6C8	/* Pyramid Appliance Display */
+
+/* www.elsterelectricity.com Elster Unicom III Optical Probe */
+#define FTDI_ELSTER_UNICOM_PID		0xE700 /* Product Id */
+
+/*
+ * Gude Analog- und Digitalsysteme GmbH
+ */
+#define FTDI_GUDEADS_E808_PID    0xE808
+#define FTDI_GUDEADS_E809_PID    0xE809
+#define FTDI_GUDEADS_E80A_PID    0xE80A
+#define FTDI_GUDEADS_E80B_PID    0xE80B
+#define FTDI_GUDEADS_E80C_PID    0xE80C
+#define FTDI_GUDEADS_E80D_PID    0xE80D
+#define FTDI_GUDEADS_E80E_PID    0xE80E
+#define FTDI_GUDEADS_E80F_PID    0xE80F
+#define FTDI_GUDEADS_E888_PID    0xE888  /* Expert ISDN Control USB */
+#define FTDI_GUDEADS_E889_PID    0xE889  /* USB RS-232 OptoBridge */
+#define FTDI_GUDEADS_E88A_PID    0xE88A
+#define FTDI_GUDEADS_E88B_PID    0xE88B
+#define FTDI_GUDEADS_E88C_PID    0xE88C
+#define FTDI_GUDEADS_E88D_PID    0xE88D
+#define FTDI_GUDEADS_E88E_PID    0xE88E
+#define FTDI_GUDEADS_E88F_PID    0xE88F
+
+/*
+ * Eclo (http://www.eclo.pt/) product IDs.
+ * PID 0xEA90 submitted by Martin Grill.
+ */
+#define FTDI_ECLO_COM_1WIRE_PID	0xEA90	/* COM to 1-Wire USB adaptor */
+
+/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
+#define FTDI_TNC_X_PID		0xEBE0
+
+/*
+ * Teratronik product ids.
+ * Submitted by O. Wölfelschneider.
+ */
+#define FTDI_TERATRONIK_VCP_PID	 0xEC88	/* Teratronik device (preferring VCP driver on windows) */
+#define FTDI_TERATRONIK_D2XX_PID 0xEC89	/* Teratronik device (preferring D2XX driver on windows) */
+
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
+
+/*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define HAMEG_HO820_PID			0xed74
+#define HAMEG_HO730_PID			0xed73
+#define HAMEG_HO720_PID			0xed72
+#define HAMEG_HO870_PID			0xed71
+
+/*
+ *  MaxStream devices	www.maxstream.net
+ */
+#define FTDI_MAXSTREAM_PID	0xEE18	/* Xbee PKG-U Module */
+
+/*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
+ * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
+ * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
+ */
+#define FTDI_MHAM_KW_PID	0xEEE8	/* USB-KW interface */
+#define FTDI_MHAM_YS_PID	0xEEE9	/* USB-YS interface */
+#define FTDI_MHAM_Y6_PID	0xEEEA	/* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID	0xEEEB	/* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID	0xEEEC	/* USB-IC interface */
+#define FTDI_MHAM_DB9_PID	0xEEED	/* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID	0xEEEE	/* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID	0xEEEF	/* USB-Y9 interface */
+
+/* Domintell products  http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
+#define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
+
+/*
+ * The following are the values for the Perle Systems
+ * UltraPort USB serial converters
+ */
+#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0	/* Perle UltraPort Product Id */
+
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II		0xF0C8
+
+/* an infrared receiver for user access control with IR tags */
+#define FTDI_PIEGROUP_PID	0xF208	/* Product Id */
+
+/* ACT Solutions HomePro ZWave interface
+   (http://www.act-solutions.com/HomePro-Product-Matrix.html) */
+#define FTDI_ACTZWAVE_PID	0xF2D0
+
+/*
+ * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
+ * USB-TTY aktiv, USB-TTY passiv.  Some PIDs are used by several devices
+ * and I'm not entirely sure which are used by which.
+ */
+#define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
+#define FTDI_4N_GALAXY_DE_2_PID	0xF3C1
+#define FTDI_4N_GALAXY_DE_3_PID	0xF3C2
+
+/*
+ * Linx Technologies product ids
+ */
+#define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
+#define LINX_MASTERDEVEL2_PID   0xF449	/* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID   0xF44A	/* Linx future device */
+#define LINX_FUTURE_1_PID   0xF44B	/* Linx future device */
+#define LINX_FUTURE_2_PID   0xF44C	/* Linx future device */
+
+/*
+ * Oceanic product ids
+ */
+#define FTDI_OCEANIC_PID	0xF460  /* Oceanic dive instrument */
+
+/*
+ * SUUNTO product ids
+ */
+#define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
+
+/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
+/* http://www.usbuirt.com/ */
+#define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
+
+/* CCS Inc. ICDU/ICDU40 product ID -
+ * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */
+#define FTDI_CCSICDU20_0_PID    0xF9D0
+#define FTDI_CCSICDU40_1_PID    0xF9D1
+#define FTDI_CCSMACHX_2_PID     0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID    0xF9D4
+#define FTDI_CCSPRIME8_5_PID    0xF9D5
+
+/*
+ * The following are the values for the Matrix Orbital LCD displays,
+ * which are the FT232BM ( similar to the 8U232AM )
+ */
+#define FTDI_MTXORB_0_PID      0xFA00  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_1_PID      0xFA01  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_2_PID      0xFA02  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_3_PID      0xFA03  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_4_PID      0xFA04  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_5_PID      0xFA05  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_6_PID      0xFA06  /* Matrix Orbital Product Id */
+
+/*
+ * Home Electronics (www.home-electro.com) USB gadgets
+ */
+#define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR transceiver */
+
+/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */
+#define INSIDE_ACCESSO		0xFAD0
+
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Protego product ids
+ */
+#define PROTEGO_SPECIAL_1	0xFC70	/* special/unknown device */
+#define PROTEGO_R2X0		0xFC71	/* R200-USB TRNG unit (R210, R220, and R230) */
+#define PROTEGO_SPECIAL_3	0xFC72	/* special/unknown device */
+#define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */
+
+/*
+ * Sony Ericsson product ids
+ */
+#define FTDI_DSS20_PID		0xFC82	/* DSS-20 Sync Station for Sony Ericsson P800 */
+#define FTDI_URBAN_0_PID	0xFC8A	/* Sony Ericsson Urban, uart #0 */
+#define FTDI_URBAN_1_PID	0xFC8B	/* Sony Ericsson Urban, uart #1 */
+
+/* www.irtrans.de device */
+#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
+
+/*
+ * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID)
+ * CAN fieldbus interface adapter, added by port GmbH www.port.de)
+ * Ian Abbott changed the macro names for consistency.
+ */
+#define FTDI_RM_CANVIEW_PID	0xfd60	/* Product Id */
+/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
+#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+
+#define FTDI_USBX_707_PID 0xF857	/* ADSTech IR Blaster USBX-707 (FTDI_VID) */
+
+#define FTDI_RELAIS_PID	0xFA10  /* Relais device from Rudolf Gugler */
+
+/*
+ * PCDJ use ftdi based dj-controllers. The following PID is
+ * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
+ * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
+ */
+#define FTDI_PCDJ_DAC2_PID 0xFA88
+
+#define FTDI_R2000KU_TRUE_RNG	0xFB80  /* R2000KU TRUE RNG (FTDI_VID) */
+
+/*
+ * DIEBOLD BCS SE923 (FTDI_VID)
+ */
+#define DIEBOLD_BCS_SE923_PID	0xfb99
+
+/* www.crystalfontz.com devices
+ * - thanx for providing free devices for evaluation !
+ * they use the ftdi chipset for the USB interface
+ * and the vendor id is the same
+ */
+#define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
+#define FTDI_XF_634_PID 0xFC09	/* 634: 20x4 Character Display */
+#define FTDI_XF_547_PID 0xFC0A	/* 547: Two line Display */
+#define FTDI_XF_633_PID 0xFC0B	/* 633: 16x2 Character Display with Keys */
+#define FTDI_XF_631_PID 0xFC0C	/* 631: 20x2 Character Display */
+#define FTDI_XF_635_PID 0xFC0D	/* 635: 20x4 Character Display */
+#define FTDI_XF_640_PID 0xFC0E	/* 640: Two line Display */
+#define FTDI_XF_642_PID 0xFC0F	/* 642: Two line Display */
+
+/*
+ * Video Networks Limited / Homechoice in the UK use an ftdi-based device
+ * for their 1Mb broadband internet service.  The following PID is exhibited
+ * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID)
+ */
+#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
+/*
+ * IBS elektronik product ids (FTDI_VID)
+ * Submitted by Thomas Schleusener
+ */
+#define FTDI_IBS_US485_PID	0xff38  /* IBS US485 (USB<-->RS422/485 interface) */
+#define FTDI_IBS_PICPRO_PID	0xff39  /* IBS PIC-Programmer */
+#define FTDI_IBS_PCMCIA_PID	0xff3a  /* IBS Card reader for PCMCIA SRAM-cards */
+#define FTDI_IBS_PK1_PID	0xff3b  /* IBS PK1 - Particel counter */
+#define FTDI_IBS_RS232MON_PID	0xff3c  /* IBS RS232 - Monitor */
+#define FTDI_IBS_APP70_PID	0xff3d  /* APP 70 (dust monitoring system) */
+#define FTDI_IBS_PEDO_PID	0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */
+#define FTDI_IBS_PROD_PID	0xff3f  /* future device */
+/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+/*
+ * TavIR AVR product ids (FTDI_VID)
+ */
+#define FTDI_TAVIR_STK500_PID	0xFA33	/* STK500 AVR programmer */
+
+/*
+ * TIAO product ids (FTDI_VID)
+ * http://www.tiaowiki.com/w/Main_Page
+ */
+#define FTDI_TIAO_UMPA_PID	0x8a98	/* TIAO/DIYGADGET USB Multi-Protocol Adapter */
+
+
+/********************************/
+/** third-party VID/PID combos **/
+/********************************/
+
+
+
+/*
+ * Atmel STK541
+ */
+#define ATMEL_VID		0x03eb /* Vendor ID */
+#define STK541_PID		0x2109 /* Zigbee Controller */
+
+/*
+ * Blackfin gnICE JTAG
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
+ */
+#define ADI_VID			0x0456
+#define ADI_GNICE_PID		0xF000
+#define ADI_GNICEPLUS_PID	0xF001
+
+/*
+ * Microchip Technology, Inc.
+ *
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications.  The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
+ * Hornby Elite - Digital Command Control Console
+ * http://www.hornby.com/hornby-dcc/controllers/
+ */
+#define MICROCHIP_VID		0x04D8
+#define MICROCHIP_USB_BOARD_PID	0x000A /* CDC RS-232 Emulation Demo */
+
+/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID		0x0584
+#define RATOC_PRODUCT_ID_USB60F	0xb020
+
+/*
+ * Acton Research Corp.
+ */
+#define ACTON_VID		0x0647	/* Vendor ID */
+#define ACTON_SPECTRAPRO_PID	0x0100
+
+/*
+ * Contec products (http://www.contec.com)
+ * Submitted by Daniel Sangorrin
+ */
+#define CONTEC_VID		0x06CE	/* Vendor ID */
+#define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
+
+/*
+ * Definitions for B&B Electronics products.
+ */
+#define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
+#define BANDB_USOTL4_PID	0xAC01	/* USOTL4 Isolated RS-485 Converter */
+#define BANDB_USTL4_PID		0xAC02	/* USTL4 RS-485 Converter */
+#define BANDB_USO9ML2_PID	0xAC03	/* USO9ML2 Isolated RS-232 Converter */
+#define BANDB_USOPTL4_PID	0xAC11
+#define BANDB_USPTL4_PID	0xAC12
+#define BANDB_USO9ML2DR_2_PID	0xAC16
+#define BANDB_USO9ML2DR_PID	0xAC17
+#define BANDB_USOPTL4DR2_PID	0xAC18	/* USOPTL4R-2 2-port Isolated RS-232 Converter */
+#define BANDB_USOPTL4DR_PID	0xAC19
+#define BANDB_485USB9F_2W_PID	0xAC25
+#define BANDB_485USB9F_4W_PID	0xAC26
+#define BANDB_232USB9M_PID	0xAC27
+#define BANDB_485USBTB_2W_PID	0xAC33
+#define BANDB_485USBTB_4W_PID	0xAC34
+#define BANDB_TTL5USB9M_PID	0xAC49
+#define BANDB_TTL3USB9M_PID	0xAC50
+#define BANDB_ZZ_PROG1_USB_PID	0xBA02
+
+/*
+ * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
+ */
+#define INTREPID_VID		0x093C
+#define INTREPID_VALUECAN_PID	0x0601
+#define INTREPID_NEOVI_PID	0x0701
+
+/*
+ * Definitions for ID TECH (www.idt-net.com) devices
+ */
+#define IDTECH_VID		0x0ACD	/* ID TECH Vendor ID */
+#define IDTECH_IDT1221U_PID	0x0300	/* IDT1221U USB to RS-232 adapter */
+
+/*
+ * Definitions for Omnidirectional Control Technology, Inc. devices
+ */
+#define OCT_VID			0x0B39	/* OCT vendor ID */
+/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
+/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
+/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_DK201_PID		0x0103	/* OCT DK201 USB docking station */
+#define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
+
+/*
+ * Definitions for Icom Inc. devices
+ */
+#define ICOM_VID		0x0C26 /* Icom vendor ID */
+/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
+#define ICOM_ID_1_PID		0x0004 /* ID-1 USB to RS-232 */
+/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
+#define ICOM_OPC_U_UC_PID	0x0018 /* OPC-478UC, OPC-1122U cloning cable */
+/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
+#define ICOM_ID_RP2C1_PID	0x0009 /* ID-RP2C Asset 1 to RS-232 */
+#define ICOM_ID_RP2C2_PID	0x000A /* ID-RP2C Asset 2 to RS-232 */
+#define ICOM_ID_RP2D_PID	0x000B /* ID-RP2D configuration port*/
+#define ICOM_ID_RP2VT_PID	0x000C /* ID-RP2V Transmit config port */
+#define ICOM_ID_RP2VR_PID	0x000D /* ID-RP2V Receive config port */
+#define ICOM_ID_RP4KVT_PID	0x0010 /* ID-RP4000V Transmit config port */
+#define ICOM_ID_RP4KVR_PID	0x0011 /* ID-RP4000V Receive config port */
+#define ICOM_ID_RP2KVT_PID	0x0012 /* ID-RP2000V Transmit config port */
+#define ICOM_ID_RP2KVR_PID	0x0013 /* ID-RP2000V Receive config port */
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID	0x0c33	/* Vendor ID */
+#define AURICAL_USB_PID		0x0010	/* Aurical USB Audiometer */
+
+/*
+ * The following are the values for the Sealevel SeaLINK+ adapters.
+ * (Original list sent by Tuan Hoang.  Ian Abbott renamed the macros and
+ * removed some PIDs that don't seem to match any existing products.)
+ */
+#define SEALEVEL_VID		0x0c52	/* Sealevel Vendor ID */
+#define SEALEVEL_2101_PID	0x2101	/* SeaLINK+232 (2101/2105) */
+#define SEALEVEL_2102_PID	0x2102	/* SeaLINK+485 (2102) */
+#define SEALEVEL_2103_PID	0x2103	/* SeaLINK+232I (2103) */
+#define SEALEVEL_2104_PID	0x2104	/* SeaLINK+485I (2104) */
+#define SEALEVEL_2106_PID	0x9020	/* SeaLINK+422 (2106) */
+#define SEALEVEL_2201_1_PID	0x2211	/* SeaPORT+2/232 (2201) Port 1 */
+#define SEALEVEL_2201_2_PID	0x2221	/* SeaPORT+2/232 (2201) Port 2 */
+#define SEALEVEL_2202_1_PID	0x2212	/* SeaPORT+2/485 (2202) Port 1 */
+#define SEALEVEL_2202_2_PID	0x2222	/* SeaPORT+2/485 (2202) Port 2 */
+#define SEALEVEL_2203_1_PID	0x2213	/* SeaPORT+2 (2203) Port 1 */
+#define SEALEVEL_2203_2_PID	0x2223	/* SeaPORT+2 (2203) Port 2 */
+#define SEALEVEL_2401_1_PID	0x2411	/* SeaPORT+4/232 (2401) Port 1 */
+#define SEALEVEL_2401_2_PID	0x2421	/* SeaPORT+4/232 (2401) Port 2 */
+#define SEALEVEL_2401_3_PID	0x2431	/* SeaPORT+4/232 (2401) Port 3 */
+#define SEALEVEL_2401_4_PID	0x2441	/* SeaPORT+4/232 (2401) Port 4 */
+#define SEALEVEL_2402_1_PID	0x2412	/* SeaPORT+4/485 (2402) Port 1 */
+#define SEALEVEL_2402_2_PID	0x2422	/* SeaPORT+4/485 (2402) Port 2 */
+#define SEALEVEL_2402_3_PID	0x2432	/* SeaPORT+4/485 (2402) Port 3 */
+#define SEALEVEL_2402_4_PID	0x2442	/* SeaPORT+4/485 (2402) Port 4 */
+#define SEALEVEL_2403_1_PID	0x2413	/* SeaPORT+4 (2403) Port 1 */
+#define SEALEVEL_2403_2_PID	0x2423	/* SeaPORT+4 (2403) Port 2 */
+#define SEALEVEL_2403_3_PID	0x2433	/* SeaPORT+4 (2403) Port 3 */
+#define SEALEVEL_2403_4_PID	0x2443	/* SeaPORT+4 (2403) Port 4 */
+#define SEALEVEL_2801_1_PID	0X2811	/* SeaLINK+8/232 (2801) Port 1 */
+#define SEALEVEL_2801_2_PID	0X2821	/* SeaLINK+8/232 (2801) Port 2 */
+#define SEALEVEL_2801_3_PID	0X2831	/* SeaLINK+8/232 (2801) Port 3 */
+#define SEALEVEL_2801_4_PID	0X2841	/* SeaLINK+8/232 (2801) Port 4 */
+#define SEALEVEL_2801_5_PID	0X2851	/* SeaLINK+8/232 (2801) Port 5 */
+#define SEALEVEL_2801_6_PID	0X2861	/* SeaLINK+8/232 (2801) Port 6 */
+#define SEALEVEL_2801_7_PID	0X2871	/* SeaLINK+8/232 (2801) Port 7 */
+#define SEALEVEL_2801_8_PID	0X2881	/* SeaLINK+8/232 (2801) Port 8 */
+#define SEALEVEL_2802_1_PID	0X2812	/* SeaLINK+8/485 (2802) Port 1 */
+#define SEALEVEL_2802_2_PID	0X2822	/* SeaLINK+8/485 (2802) Port 2 */
+#define SEALEVEL_2802_3_PID	0X2832	/* SeaLINK+8/485 (2802) Port 3 */
+#define SEALEVEL_2802_4_PID	0X2842	/* SeaLINK+8/485 (2802) Port 4 */
+#define SEALEVEL_2802_5_PID	0X2852	/* SeaLINK+8/485 (2802) Port 5 */
+#define SEALEVEL_2802_6_PID	0X2862	/* SeaLINK+8/485 (2802) Port 6 */
+#define SEALEVEL_2802_7_PID	0X2872	/* SeaLINK+8/485 (2802) Port 7 */
+#define SEALEVEL_2802_8_PID	0X2882	/* SeaLINK+8/485 (2802) Port 8 */
+#define SEALEVEL_2803_1_PID	0X2813	/* SeaLINK+8 (2803) Port 1 */
+#define SEALEVEL_2803_2_PID	0X2823	/* SeaLINK+8 (2803) Port 2 */
+#define SEALEVEL_2803_3_PID	0X2833	/* SeaLINK+8 (2803) Port 3 */
+#define SEALEVEL_2803_4_PID	0X2843	/* SeaLINK+8 (2803) Port 4 */
+#define SEALEVEL_2803_5_PID	0X2853	/* SeaLINK+8 (2803) Port 5 */
+#define SEALEVEL_2803_6_PID	0X2863	/* SeaLINK+8 (2803) Port 6 */
+#define SEALEVEL_2803_7_PID	0X2873	/* SeaLINK+8 (2803) Port 7 */
+#define SEALEVEL_2803_8_PID	0X2883	/* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803R_1_PID	0Xa02a	/* SeaLINK+8 (2803-ROHS) Port 1+2 */
+#define SEALEVEL_2803R_2_PID	0Xa02b	/* SeaLINK+8 (2803-ROHS) Port 3+4 */
+#define SEALEVEL_2803R_3_PID	0Xa02c	/* SeaLINK+8 (2803-ROHS) Port 5+6 */
+#define SEALEVEL_2803R_4_PID	0Xa02d	/* SeaLINK+8 (2803-ROHS) Port 7+8 */
+
+/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
+ */
+#define JETI_VID		0x0c6c
+#define JETI_SPC1201_PID	0x04b2
+
+/*
+ * FTDI USB UART chips used in construction projects from the
+ * Elektor Electronics magazine (http://www.elektor.com/)
+ */
+#define ELEKTOR_VID		0x0C7D
+#define ELEKTOR_FT323R_PID	0x0005	/* RFID-Reader, issue 09-2006 */
+
+/*
+ * Posiflex inc retail equipment (http://www.posiflex.com.tw)
+ */
+#define POSIFLEX_VID		0x0d3a  /* Vendor ID */
+#define POSIFLEX_PP7000_PID	0x0300  /* PP-7000II thermal printer */
+
+/*
+ * The following are the values for two KOBIL chipcard terminals.
+ */
+#define KOBIL_VID		0x0d46	/* KOBIL Vendor ID */
+#define KOBIL_CONV_B1_PID	0x2020	/* KOBIL Konverter for B1 */
+#define KOBIL_CONV_KAAN_PID	0x2021	/* KOBIL_Konverter for KAAN */
+
+#define FTDI_NF_RIC_VID	0x0DCD	/* Vendor Id */
+#define FTDI_NF_RIC_PID	0x0001	/* Product Id */
+
+/*
+ * Falcom Wireless Communications GmbH
+ */
+#define FALCOM_VID		0x0F94	/* Vendor Id */
+#define FALCOM_TWIST_PID	0x0001	/* Falcom Twist USB GPRS modem */
+#define FALCOM_SAMBA_PID	0x0005	/* Falcom Samba USB GPRS modem */
+
+/* Larsen and Brusgaard AltiTrack/USBtrack */
+#define LARSENBRUSGAARD_VID		0x0FD8
+#define LB_ALTITRACK_PID		0x0001
+
+/*
+ * TTi (Thurlby Thandar Instruments)
+ */
+#define TTI_VID			0x103E	/* Vendor Id */
+#define TTI_QL355P_PID		0x03E8	/* TTi QL355P power supply */
+
+/* Interbiometrics USB I/O Board */
+/* Developed for Interbiometrics by Rudolf Gugler */
+#define INTERBIOMETRICS_VID              0x1209
+#define INTERBIOMETRICS_IOBOARD_PID      0x1002
+#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID			0x128D
+#define TESTO_USB_INTERFACE_PID		0x0001
+
+/*
+ * Mobility Electronics products.
+ */
+#define MOBILITY_VID			0x1342
+#define MOBILITY_USB_SERIAL_PID		0x0202	/* EasiDock USB 200 serial */
+
+/*
+ * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
+ * Submitted by Harald Welte <laforge@openmoko.org>
+ */
+#define	FIC_VID			0x1457
+#define	FIC_NEO1973_DEBUG_PID	0x5118
+
+/* Olimex */
+#define OLIMEX_VID			0x15BA
+#define OLIMEX_ARM_USB_OCD_PID		0x0003
+#define OLIMEX_ARM_USB_OCD_H_PID	0x002b
+
+/*
+ * Telldus Technologies
+ */
+#define TELLDUS_VID			0x1781	/* Vendor ID */
+#define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
+
+/*
+ * RT Systems programming cables for various ham radios
+ */
+#define RTSYSTEMS_VID			0x2100	/* Vendor ID */
+#define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID		0x9e57	/* USB-RTS01 Radio Cable */
+
+
+/*
+ * Physik Instrumente
+ * http://www.physikinstrumente.com/en/products/
+ */
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID	0xe0a0  /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID	0xe0a1  /* PI Encoder Trigger Box */
+
+#define PI_VID              0x1a72  /* Vendor ID */
+#define PI_C866_PID	0x1000  /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID	0x1001  /* PI C-663 Mercury-Step */
+#define PI_C725_PID	0x1002  /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID	0x1005  /* PI E-517 Digital Piezo Controller Operation Module */
+#define PI_C863_PID	0x1007  /* PI C-863 */
+#define PI_E861_PID	0x1008  /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID	0x1009  /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID	0x100D  /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID	0x100E  /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID	0x100F  /* PI Digital Piezo Controller */
+#define PI_1011_PID	0x1011  /* PI Digital Piezo Controller */
+#define PI_1012_PID	0x1012  /* PI Motion Controller */
+#define PI_1013_PID	0x1013  /* PI Motion Controller */
+#define PI_1014_PID	0x1014  /* PI Device */
+#define PI_1015_PID	0x1015  /* PI Device */
+#define PI_1016_PID	0x1016  /* PI Digital Servo Module */
+
+/*
+ * Kondo Kagaku Co.Ltd.
+ * http://www.kondo-robot.com/EN
+ */
+#define KONDO_VID 		0x165c
+#define KONDO_USB_SERIAL_PID	0x0002
+
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID                      0x1A79
+#define BAYER_CONTOUR_CABLE_PID        0x6001
+
+/*
+ * The following are the values for the Matrix Orbital FTDI Range
+ * Anything in this range will use an FT232RL.
+ */
+#define MTXORB_VID			0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID	0x0100
+#define MTXORB_FTDI_RANGE_0101_PID	0x0101
+#define MTXORB_FTDI_RANGE_0102_PID	0x0102
+#define MTXORB_FTDI_RANGE_0103_PID	0x0103
+#define MTXORB_FTDI_RANGE_0104_PID	0x0104
+#define MTXORB_FTDI_RANGE_0105_PID	0x0105
+#define MTXORB_FTDI_RANGE_0106_PID	0x0106
+#define MTXORB_FTDI_RANGE_0107_PID	0x0107
+#define MTXORB_FTDI_RANGE_0108_PID	0x0108
+#define MTXORB_FTDI_RANGE_0109_PID	0x0109
+#define MTXORB_FTDI_RANGE_010A_PID	0x010A
+#define MTXORB_FTDI_RANGE_010B_PID	0x010B
+#define MTXORB_FTDI_RANGE_010C_PID	0x010C
+#define MTXORB_FTDI_RANGE_010D_PID	0x010D
+#define MTXORB_FTDI_RANGE_010E_PID	0x010E
+#define MTXORB_FTDI_RANGE_010F_PID	0x010F
+#define MTXORB_FTDI_RANGE_0110_PID	0x0110
+#define MTXORB_FTDI_RANGE_0111_PID	0x0111
+#define MTXORB_FTDI_RANGE_0112_PID	0x0112
+#define MTXORB_FTDI_RANGE_0113_PID	0x0113
+#define MTXORB_FTDI_RANGE_0114_PID	0x0114
+#define MTXORB_FTDI_RANGE_0115_PID	0x0115
+#define MTXORB_FTDI_RANGE_0116_PID	0x0116
+#define MTXORB_FTDI_RANGE_0117_PID	0x0117
+#define MTXORB_FTDI_RANGE_0118_PID	0x0118
+#define MTXORB_FTDI_RANGE_0119_PID	0x0119
+#define MTXORB_FTDI_RANGE_011A_PID	0x011A
+#define MTXORB_FTDI_RANGE_011B_PID	0x011B
+#define MTXORB_FTDI_RANGE_011C_PID	0x011C
+#define MTXORB_FTDI_RANGE_011D_PID	0x011D
+#define MTXORB_FTDI_RANGE_011E_PID	0x011E
+#define MTXORB_FTDI_RANGE_011F_PID	0x011F
+#define MTXORB_FTDI_RANGE_0120_PID	0x0120
+#define MTXORB_FTDI_RANGE_0121_PID	0x0121
+#define MTXORB_FTDI_RANGE_0122_PID	0x0122
+#define MTXORB_FTDI_RANGE_0123_PID	0x0123
+#define MTXORB_FTDI_RANGE_0124_PID	0x0124
+#define MTXORB_FTDI_RANGE_0125_PID	0x0125
+#define MTXORB_FTDI_RANGE_0126_PID	0x0126
+#define MTXORB_FTDI_RANGE_0127_PID	0x0127
+#define MTXORB_FTDI_RANGE_0128_PID	0x0128
+#define MTXORB_FTDI_RANGE_0129_PID	0x0129
+#define MTXORB_FTDI_RANGE_012A_PID	0x012A
+#define MTXORB_FTDI_RANGE_012B_PID	0x012B
+#define MTXORB_FTDI_RANGE_012C_PID	0x012C
+#define MTXORB_FTDI_RANGE_012D_PID	0x012D
+#define MTXORB_FTDI_RANGE_012E_PID	0x012E
+#define MTXORB_FTDI_RANGE_012F_PID	0x012F
+#define MTXORB_FTDI_RANGE_0130_PID	0x0130
+#define MTXORB_FTDI_RANGE_0131_PID	0x0131
+#define MTXORB_FTDI_RANGE_0132_PID	0x0132
+#define MTXORB_FTDI_RANGE_0133_PID	0x0133
+#define MTXORB_FTDI_RANGE_0134_PID	0x0134
+#define MTXORB_FTDI_RANGE_0135_PID	0x0135
+#define MTXORB_FTDI_RANGE_0136_PID	0x0136
+#define MTXORB_FTDI_RANGE_0137_PID	0x0137
+#define MTXORB_FTDI_RANGE_0138_PID	0x0138
+#define MTXORB_FTDI_RANGE_0139_PID	0x0139
+#define MTXORB_FTDI_RANGE_013A_PID	0x013A
+#define MTXORB_FTDI_RANGE_013B_PID	0x013B
+#define MTXORB_FTDI_RANGE_013C_PID	0x013C
+#define MTXORB_FTDI_RANGE_013D_PID	0x013D
+#define MTXORB_FTDI_RANGE_013E_PID	0x013E
+#define MTXORB_FTDI_RANGE_013F_PID	0x013F
+#define MTXORB_FTDI_RANGE_0140_PID	0x0140
+#define MTXORB_FTDI_RANGE_0141_PID	0x0141
+#define MTXORB_FTDI_RANGE_0142_PID	0x0142
+#define MTXORB_FTDI_RANGE_0143_PID	0x0143
+#define MTXORB_FTDI_RANGE_0144_PID	0x0144
+#define MTXORB_FTDI_RANGE_0145_PID	0x0145
+#define MTXORB_FTDI_RANGE_0146_PID	0x0146
+#define MTXORB_FTDI_RANGE_0147_PID	0x0147
+#define MTXORB_FTDI_RANGE_0148_PID	0x0148
+#define MTXORB_FTDI_RANGE_0149_PID	0x0149
+#define MTXORB_FTDI_RANGE_014A_PID	0x014A
+#define MTXORB_FTDI_RANGE_014B_PID	0x014B
+#define MTXORB_FTDI_RANGE_014C_PID	0x014C
+#define MTXORB_FTDI_RANGE_014D_PID	0x014D
+#define MTXORB_FTDI_RANGE_014E_PID	0x014E
+#define MTXORB_FTDI_RANGE_014F_PID	0x014F
+#define MTXORB_FTDI_RANGE_0150_PID	0x0150
+#define MTXORB_FTDI_RANGE_0151_PID	0x0151
+#define MTXORB_FTDI_RANGE_0152_PID	0x0152
+#define MTXORB_FTDI_RANGE_0153_PID	0x0153
+#define MTXORB_FTDI_RANGE_0154_PID	0x0154
+#define MTXORB_FTDI_RANGE_0155_PID	0x0155
+#define MTXORB_FTDI_RANGE_0156_PID	0x0156
+#define MTXORB_FTDI_RANGE_0157_PID	0x0157
+#define MTXORB_FTDI_RANGE_0158_PID	0x0158
+#define MTXORB_FTDI_RANGE_0159_PID	0x0159
+#define MTXORB_FTDI_RANGE_015A_PID	0x015A
+#define MTXORB_FTDI_RANGE_015B_PID	0x015B
+#define MTXORB_FTDI_RANGE_015C_PID	0x015C
+#define MTXORB_FTDI_RANGE_015D_PID	0x015D
+#define MTXORB_FTDI_RANGE_015E_PID	0x015E
+#define MTXORB_FTDI_RANGE_015F_PID	0x015F
+#define MTXORB_FTDI_RANGE_0160_PID	0x0160
+#define MTXORB_FTDI_RANGE_0161_PID	0x0161
+#define MTXORB_FTDI_RANGE_0162_PID	0x0162
+#define MTXORB_FTDI_RANGE_0163_PID	0x0163
+#define MTXORB_FTDI_RANGE_0164_PID	0x0164
+#define MTXORB_FTDI_RANGE_0165_PID	0x0165
+#define MTXORB_FTDI_RANGE_0166_PID	0x0166
+#define MTXORB_FTDI_RANGE_0167_PID	0x0167
+#define MTXORB_FTDI_RANGE_0168_PID	0x0168
+#define MTXORB_FTDI_RANGE_0169_PID	0x0169
+#define MTXORB_FTDI_RANGE_016A_PID	0x016A
+#define MTXORB_FTDI_RANGE_016B_PID	0x016B
+#define MTXORB_FTDI_RANGE_016C_PID	0x016C
+#define MTXORB_FTDI_RANGE_016D_PID	0x016D
+#define MTXORB_FTDI_RANGE_016E_PID	0x016E
+#define MTXORB_FTDI_RANGE_016F_PID	0x016F
+#define MTXORB_FTDI_RANGE_0170_PID	0x0170
+#define MTXORB_FTDI_RANGE_0171_PID	0x0171
+#define MTXORB_FTDI_RANGE_0172_PID	0x0172
+#define MTXORB_FTDI_RANGE_0173_PID	0x0173
+#define MTXORB_FTDI_RANGE_0174_PID	0x0174
+#define MTXORB_FTDI_RANGE_0175_PID	0x0175
+#define MTXORB_FTDI_RANGE_0176_PID	0x0176
+#define MTXORB_FTDI_RANGE_0177_PID	0x0177
+#define MTXORB_FTDI_RANGE_0178_PID	0x0178
+#define MTXORB_FTDI_RANGE_0179_PID	0x0179
+#define MTXORB_FTDI_RANGE_017A_PID	0x017A
+#define MTXORB_FTDI_RANGE_017B_PID	0x017B
+#define MTXORB_FTDI_RANGE_017C_PID	0x017C
+#define MTXORB_FTDI_RANGE_017D_PID	0x017D
+#define MTXORB_FTDI_RANGE_017E_PID	0x017E
+#define MTXORB_FTDI_RANGE_017F_PID	0x017F
+#define MTXORB_FTDI_RANGE_0180_PID	0x0180
+#define MTXORB_FTDI_RANGE_0181_PID	0x0181
+#define MTXORB_FTDI_RANGE_0182_PID	0x0182
+#define MTXORB_FTDI_RANGE_0183_PID	0x0183
+#define MTXORB_FTDI_RANGE_0184_PID	0x0184
+#define MTXORB_FTDI_RANGE_0185_PID	0x0185
+#define MTXORB_FTDI_RANGE_0186_PID	0x0186
+#define MTXORB_FTDI_RANGE_0187_PID	0x0187
+#define MTXORB_FTDI_RANGE_0188_PID	0x0188
+#define MTXORB_FTDI_RANGE_0189_PID	0x0189
+#define MTXORB_FTDI_RANGE_018A_PID	0x018A
+#define MTXORB_FTDI_RANGE_018B_PID	0x018B
+#define MTXORB_FTDI_RANGE_018C_PID	0x018C
+#define MTXORB_FTDI_RANGE_018D_PID	0x018D
+#define MTXORB_FTDI_RANGE_018E_PID	0x018E
+#define MTXORB_FTDI_RANGE_018F_PID	0x018F
+#define MTXORB_FTDI_RANGE_0190_PID	0x0190
+#define MTXORB_FTDI_RANGE_0191_PID	0x0191
+#define MTXORB_FTDI_RANGE_0192_PID	0x0192
+#define MTXORB_FTDI_RANGE_0193_PID	0x0193
+#define MTXORB_FTDI_RANGE_0194_PID	0x0194
+#define MTXORB_FTDI_RANGE_0195_PID	0x0195
+#define MTXORB_FTDI_RANGE_0196_PID	0x0196
+#define MTXORB_FTDI_RANGE_0197_PID	0x0197
+#define MTXORB_FTDI_RANGE_0198_PID	0x0198
+#define MTXORB_FTDI_RANGE_0199_PID	0x0199
+#define MTXORB_FTDI_RANGE_019A_PID	0x019A
+#define MTXORB_FTDI_RANGE_019B_PID	0x019B
+#define MTXORB_FTDI_RANGE_019C_PID	0x019C
+#define MTXORB_FTDI_RANGE_019D_PID	0x019D
+#define MTXORB_FTDI_RANGE_019E_PID	0x019E
+#define MTXORB_FTDI_RANGE_019F_PID	0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID	0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID	0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID	0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID	0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID	0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID	0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID	0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID	0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID	0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID	0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID	0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID	0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID	0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID	0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID	0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID	0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID	0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID	0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID	0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID	0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID	0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID	0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID	0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID	0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID	0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID	0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID	0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID	0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID	0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID	0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID	0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID	0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID	0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID	0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID	0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID	0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID	0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID	0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID	0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID	0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID	0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID	0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID	0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID	0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID	0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID	0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID	0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID	0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID	0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID	0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID	0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID	0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID	0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID	0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID	0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID	0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID	0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID	0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID	0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID	0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID	0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID	0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID	0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID	0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID	0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID	0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID	0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID	0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID	0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID	0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID	0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID	0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID	0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID	0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID	0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID	0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID	0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID	0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID	0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID	0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID	0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID	0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID	0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID	0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID	0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID	0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID	0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID	0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID	0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID	0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID	0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID	0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID	0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID	0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID	0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID	0x01FF
+
+
+
+/*
+ * The Mobility Lab (TML)
+ * Submitted by Pierre Castella
+ */
+#define TML_VID			0x1B91	/* Vendor ID */
+#define TML_USB_SERIAL_PID	0x0064	/* USB - Serial Converter */
+
+/* Alti-2 products  http://www.alti-2.com */
+#define ALTI2_VID	0x1BC9
+#define ALTI2_N3_PID	0x6001	/* Neptune 3 */
+
+/*
+ * Ionics PlugComputer
+ */
+#define IONICS_VID			0x1c0c
+#define IONICS_PLUGCOMPUTER_PID		0x0102
+
+/*
+ * Dresden Elektronik Sensor Terminal Board
+ */
+#define DE_VID			0x1cf1 /* Vendor ID */
+#define STB_PID			0x0001 /* Sensor Terminal Board */
+#define WHT_PID			0x0004 /* Wireless Handheld Terminal */
+
+/*
+ * STMicroelectonics
+ */
+#define ST_VID			0x0483
+#define ST_STMCLT1030_PID	0x3747 /* ST Micro Connect Lite STMCLT1030 */
+
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID			0x5050	/* Vendor ID */
+#define PAPOUCH_SB485_PID		0x0100	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_PID		0x0101	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_PID		0x0102	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485_2_PID		0x0103	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_2_PID		0x0104	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_2_PID		0x0105	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485S_PID		0x0106	/* Papouch SB485S USB-485/422 Converter */
+#define PAPOUCH_SB485C_PID		0x0107	/* Papouch SB485C USB-485/422 Converter */
+#define PAPOUCH_LEC_PID			0x0300	/* LEC USB Converter */
+#define PAPOUCH_SB232_PID		0x0301	/* Papouch SB232 USB-RS232 Converter */
+#define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
+#define PAPOUCH_IRAMP_PID		0x0500	/* Papouch IRAmp Duplex */
+#define PAPOUCH_DRAK5_PID		0x0700	/* Papouch DRAK5 */
+#define PAPOUCH_QUIDO8x8_PID		0x0800	/* Papouch Quido 8/8 Module */
+#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Papouch Quido 4/4 Module */
+#define PAPOUCH_QUIDO2x2_PID		0x0a00	/* Papouch Quido 2/2 Module */
+#define PAPOUCH_QUIDO10x1_PID		0x0b00	/* Papouch Quido 10/1 Module */
+#define PAPOUCH_QUIDO30x3_PID		0x0c00	/* Papouch Quido 30/3 Module */
+#define PAPOUCH_QUIDO60x3_PID		0x0d00	/* Papouch Quido 60(100)/3 Module */
+#define PAPOUCH_QUIDO2x16_PID		0x0e00	/* Papouch Quido 2/16 Module */
+#define PAPOUCH_QUIDO3x32_PID		0x0f00	/* Papouch Quido 3/32 Module */
+#define PAPOUCH_DRAK6_PID		0x1000	/* Papouch DRAK6 */
+#define PAPOUCH_UPSUSB_PID		0x8000	/* Papouch UPS-USB adapter */
+#define PAPOUCH_MU_PID			0x8001	/* MU controller */
+#define PAPOUCH_SIMUKEY_PID		0x8002	/* Papouch SimuKey */
+#define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
+#define PAPOUCH_GMUX_PID		0x8004	/* Papouch GOLIATH MUX */
+#define PAPOUCH_GMSR_PID		0x8005	/* Papouch GOLIATH MSR */
+
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID		0x9e88
+#define MARVELL_SHEEVAPLUG_PID	0x9e8f
+
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID		0xDEEE	/* Vendor ID */
+#define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
+#define EVO_8U232AM_PID		0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
+#define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
+#define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
+
+/*
+ * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403)
+ */
+#define MJSG_GENERIC_PID	0x9378
+#define MJSG_SR_RADIO_PID	0x9379
+#define MJSG_XM_RADIO_PID	0x937A
+#define MJSG_HD_RADIO_PID	0x937C
+
+/*
+ * D.O.Tec products (http://www.directout.eu)
+ */
+#define FTDI_DOTEC_PID 0x9868
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID	0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID	0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID	0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID	0xBCA4
+
+/*
+ * Segway Robotic Mobility Platform USB interface (using VID 0x0403)
+ * Submitted by John G. Rogers
+ */
+#define SEGWAY_RMP200_PID	0xe729
+
+
+/*
+ * Accesio USB Data Acquisition products (http://www.accesio.com/)
+ */
+#define ACCESIO_COM4SM_PID 	0xD578
+
+/* www.sciencescope.co.uk educational dataloggers */
+#define FTDI_SCIENCESCOPE_LOGBOOKML_PID		0xFF18
+#define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID	0xFF1C
+#define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID	0xFF1D
+
+/*
+ * Milkymist One JTAG/Serial
+ */
+#define QIHARDWARE_VID			0x20B7
+#define MILKYMISTONE_JTAGSERIAL_PID	0x0713
+
+/*
+ * CTI GmbH RS485 Converter http://www.cti-lean.com/
+ */
+/* USB-485-Mini*/
+#define FTDI_CTI_MINI_PID	0xF608
+/* USB-Nano-485*/
+#define FTDI_CTI_NANO_PID	0xF60B
+
+/*
+ * ZeitControl cardsystems GmbH rfid-readers http://zeitconrol.de
+ */
+/* TagTracer MIFARE*/
+#define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID	0xF7C0
+
+/*
+ * Rainforest Automation
+ */
+/* ZigBee controller */
+#define FTDI_RF_R106		0x8A28
+
+/*
+ * Product: HCP HIT GPRS modem
+ * Manufacturer: HCP d.o.o.
+ * ATI command output: Cinterion MC55i
+ */
+#define FTDI_CINTERION_MC55I_PID	0xA951
diff --git a/hw/usb/quirks-pl2303-ids.h b/hw/usb/quirks-pl2303-ids.h
new file mode 100644
index 0000000..8dbdb46
--- /dev/null
+++ b/hw/usb/quirks-pl2303-ids.h
@@ -0,0 +1,150 @@
+/*
+ * Prolific PL2303 USB to serial adaptor driver header file
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ */
+
+#define BENQ_VENDOR_ID			0x04a5
+#define BENQ_PRODUCT_ID_S81		0x4027
+
+#define PL2303_VENDOR_ID	0x067b
+#define PL2303_PRODUCT_ID	0x2303
+#define PL2303_PRODUCT_ID_RSAQ2		0x04bb
+#define PL2303_PRODUCT_ID_DCU11		0x1234
+#define PL2303_PRODUCT_ID_PHAROS	0xaaa0
+#define PL2303_PRODUCT_ID_RSAQ3		0xaaa2
+#define PL2303_PRODUCT_ID_ALDIGA	0x0611
+#define PL2303_PRODUCT_ID_MMX		0x0612
+#define PL2303_PRODUCT_ID_GPRS		0x0609
+#define PL2303_PRODUCT_ID_HCR331	0x331a
+#define PL2303_PRODUCT_ID_MOTOROLA	0x0307
+
+#define ATEN_VENDOR_ID		0x0557
+#define ATEN_VENDOR_ID2		0x0547
+#define ATEN_PRODUCT_ID		0x2008
+
+#define IODATA_VENDOR_ID	0x04bb
+#define IODATA_PRODUCT_ID	0x0a03
+#define IODATA_PRODUCT_ID_RSAQ5	0x0a0e
+
+#define ELCOM_VENDOR_ID		0x056e
+#define ELCOM_PRODUCT_ID	0x5003
+#define ELCOM_PRODUCT_ID_UCSGT	0x5004
+
+#define ITEGNO_VENDOR_ID	0x0eba
+#define ITEGNO_PRODUCT_ID	0x1080
+#define ITEGNO_PRODUCT_ID_2080	0x2080
+
+#define MA620_VENDOR_ID		0x0df7
+#define MA620_PRODUCT_ID	0x0620
+
+#define RATOC_VENDOR_ID		0x0584
+#define RATOC_PRODUCT_ID	0xb000
+
+#define TRIPP_VENDOR_ID		0x2478
+#define TRIPP_PRODUCT_ID	0x2008
+
+#define RADIOSHACK_VENDOR_ID	0x1453
+#define RADIOSHACK_PRODUCT_ID	0x4026
+
+#define DCU10_VENDOR_ID		0x0731
+#define DCU10_PRODUCT_ID	0x0528
+
+#define SITECOM_VENDOR_ID	0x6189
+#define SITECOM_PRODUCT_ID	0x2068
+
+/* Alcatel OT535/735 USB cable */
+#define ALCATEL_VENDOR_ID	0x11f7
+#define ALCATEL_PRODUCT_ID	0x02df
+
+/* Samsung I330 phone cradle */
+#define SAMSUNG_VENDOR_ID	0x04e8
+#define SAMSUNG_PRODUCT_ID	0x8001
+
+#define SIEMENS_VENDOR_ID	0x11f5
+#define SIEMENS_PRODUCT_ID_SX1	0x0001
+#define SIEMENS_PRODUCT_ID_X65	0x0003
+#define SIEMENS_PRODUCT_ID_X75	0x0004
+#define SIEMENS_PRODUCT_ID_EF81	0x0005
+
+#define SYNTECH_VENDOR_ID	0x0745
+#define SYNTECH_PRODUCT_ID	0x0001
+
+/* Nokia CA-42 Cable */
+#define NOKIA_CA42_VENDOR_ID	0x078b
+#define NOKIA_CA42_PRODUCT_ID	0x1234
+
+/* CA-42 CLONE Cable www.ca-42.com chipset: Prolific Technology Inc */
+#define CA_42_CA42_VENDOR_ID	0x10b5
+#define CA_42_CA42_PRODUCT_ID	0xac70
+
+#define SAGEM_VENDOR_ID		0x079b
+#define SAGEM_PRODUCT_ID	0x0027
+
+/* Leadtek GPS 9531 (ID 0413:2101) */
+#define LEADTEK_VENDOR_ID	0x0413
+#define LEADTEK_9531_PRODUCT_ID	0x2101
+
+/* USB GSM cable from Speed Dragon Multimedia, Ltd */
+#define SPEEDDRAGON_VENDOR_ID	0x0e55
+#define SPEEDDRAGON_PRODUCT_ID	0x110b
+
+/* DATAPILOT Universal-2 Phone Cable */
+#define DATAPILOT_U2_VENDOR_ID	0x0731
+#define DATAPILOT_U2_PRODUCT_ID	0x2003
+
+/* Belkin "F5U257" Serial Adapter */
+#define BELKIN_VENDOR_ID	0x050d
+#define BELKIN_PRODUCT_ID	0x0257
+
+/* Alcor Micro Corp. USB 2.0 TO RS-232 */
+#define ALCOR_VENDOR_ID		0x058F
+#define ALCOR_PRODUCT_ID	0x9720
+
+/* Willcom WS002IN Data Driver (by NetIndex Inc.) */
+#define WS002IN_VENDOR_ID	0x11f6
+#define WS002IN_PRODUCT_ID	0x2001
+
+/* Corega CG-USBRS232R Serial Adapter */
+#define COREGA_VENDOR_ID	0x07aa
+#define COREGA_PRODUCT_ID	0x002a
+
+/* Y.C. Cable U.S.A., Inc - USB to RS-232 */
+#define YCCABLE_VENDOR_ID	0x05ad
+#define YCCABLE_PRODUCT_ID	0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID	0x5372
+#define SUPERIAL_PRODUCT_ID	0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID		0x03f0
+#define HP_LD220_PRODUCT_ID	0x3524
+
+/* Cressi Edy (diving computer) PC interface */
+#define CRESSI_VENDOR_ID	0x04b8
+#define CRESSI_EDY_PRODUCT_ID	0x0521
+
+/* Zeagle dive computer interface */
+#define ZEAGLE_VENDOR_ID	0x04b8
+#define ZEAGLE_N2ITION3_PRODUCT_ID	0x0522
+
+/* Sony, USB data cable for CMD-Jxx mobile phones */
+#define SONY_VENDOR_ID		0x054c
+#define SONY_QN3USB_PRODUCT_ID	0x0437
+
+/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
+#define SANWA_VENDOR_ID		0x11ad
+#define SANWA_PRODUCT_ID	0x0001
+
+/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
+#define ADLINK_VENDOR_ID		0x0b63
+#define ADLINK_ND6530_PRODUCT_ID	0x6530
+
+/* SMART USB Serial Adapter */
+#define SMART_VENDOR_ID	0x0b8c
+#define SMART_PRODUCT_ID	0x2303
diff --git a/hw/usb/quirks.c b/hw/usb/quirks.c
new file mode 100644
index 0000000..a761a96
--- /dev/null
+++ b/hw/usb/quirks.c
@@ -0,0 +1,53 @@
+/*
+ * USB quirk handling
+ *
+ * Copyright (c) 2012 Red Hat, Inc.
+ *
+ * Red Hat Authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "quirks.h"
+#include "hw/usb.h"
+
+static bool usb_id_match(const struct usb_device_id *ids,
+                         uint16_t vendor_id, uint16_t product_id,
+                         uint8_t interface_class, uint8_t interface_subclass,
+                         uint8_t interface_protocol) {
+    int i;
+
+    for (i = 0; ids[i].vendor_id != -1; i++) {
+        if (ids[i].vendor_id  == vendor_id &&
+            ids[i].product_id == product_id &&
+            (ids[i].interface_class == -1 ||
+             (ids[i].interface_class == interface_class &&
+              ids[i].interface_subclass == interface_subclass &&
+              ids[i].interface_protocol == interface_protocol))) {
+            return true;
+        }
+    }
+    return false;
+}
+
+int usb_get_quirks(uint16_t vendor_id, uint16_t product_id,
+                   uint8_t interface_class, uint8_t interface_subclass,
+                   uint8_t interface_protocol)
+{
+    int quirks = 0;
+
+    if (usb_id_match(usbredir_raw_serial_ids, vendor_id, product_id,
+                   interface_class, interface_subclass, interface_protocol)) {
+        quirks |= USB_QUIRK_BUFFER_BULK_IN;
+    }
+    if (usb_id_match(usbredir_ftdi_serial_ids, vendor_id, product_id,
+                   interface_class, interface_subclass, interface_protocol)) {
+        quirks |= USB_QUIRK_BUFFER_BULK_IN | USB_QUIRK_IS_FTDI;
+    }
+
+    return quirks;
+}
diff --git a/hw/usb/quirks.h b/hw/usb/quirks.h
new file mode 100644
index 0000000..8dc6065
--- /dev/null
+++ b/hw/usb/quirks.h
@@ -0,0 +1,910 @@
+/*
+ * USB quirk handling
+ *
+ * Copyright (c) 2012 Red Hat, Inc.
+ *
+ * Red Hat Authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* 1 on 1 copy of linux/drivers/usb/serial/ftdi_sio_ids.h */
+#include "quirks-ftdi-ids.h"
+/* 1 on 1 copy of linux/drivers/usb/serial/pl2303.h */
+#include "quirks-pl2303-ids.h"
+
+struct usb_device_id {
+    int vendor_id;
+    int product_id;
+    int interface_class;
+    int interface_subclass;
+    int interface_protocol;
+};
+
+#define USB_DEVICE(vendor, product) \
+    .vendor_id = vendor, .product_id = product, .interface_class = -1,
+
+#define USB_DEVICE_AND_INTERFACE_INFO(vend, prod, iclass, isubclass, iproto) \
+    .vendor_id = vend, .product_id = prod, .interface_class = iclass, \
+    .interface_subclass = isubclass, .interface_protocol = iproto
+
+static const struct usb_device_id usbredir_raw_serial_ids[] = {
+    /*
+     * Silicon Laboratories CP210x USB to RS232 serial adapter ids
+     * copied from linux/drivers/usb/serial/cp210x.c
+     *
+     * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
+     */
+    { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
+    { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
+    { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+    { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+    { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+    { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
+    { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+    { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
+    { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
+    { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
+    { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
+    { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
+    { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
+    { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+    { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+    { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+    { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+    { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
+    { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
+    { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
+    { USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
+    { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
+    { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
+    { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
+    { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
+    { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
+    { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+    { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
+    { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+    { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
+    { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+    { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
+    { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+    { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
+    { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
+    { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+    { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
+    { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+    { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
+    { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
+    { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
+    { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
+    { USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
+    { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
+    { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
+    { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+    { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
+    { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+    { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
+    { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
+    { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+    { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+    { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
+    { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
+    { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
+    { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+    { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
+    { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+    { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
+    { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+    { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
+    { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+    { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
+    { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
+    { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+    { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
+    { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+    { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
+    { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+    { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
+    { USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */
+    { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
+    { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
+    { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
+    { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
+    { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
+    { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
+    { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
+    { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+    { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+    { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+    { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
+    { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+    { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+    { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+    { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+    { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
+    { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+    { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
+    { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
+    { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
+    { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+    { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+    { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
+    { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
+    { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
+    { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+    { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+    { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+    { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+    { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+    { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+    { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
+    { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
+
+    /*
+     * Prolific pl2303 USB to RS232 serial adapter ids
+     * copied from linux/drivers/usb/serial/pl2303.c
+     *
+     * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
+     * Copyright (C) 2003 IBM Corp.
+     */
+    { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
+    { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
+    { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
+    { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
+    { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
+    { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
+    { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
+    { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
+    { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
+    { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
+    { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
+    { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
+    { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
+    { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
+    { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
+    { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
+    { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
+    { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
+    { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
+    { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
+    { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
+    { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
+    { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
+    { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
+    { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
+    { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
+    { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
+    { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
+    { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
+    { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
+    { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
+    { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
+    { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
+    { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
+    { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
+    { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
+    { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
+    { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
+    { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
+    { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
+    { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
+    { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
+    { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+    { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+    { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+    { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+    { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
+    { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+    { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+    { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
+    { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
+
+    { USB_DEVICE(-1, -1) } /* Terminating Entry */
+};
+
+static const struct usb_device_id usbredir_ftdi_serial_ids[] = {
+    /*
+     * FTDI USB to RS232 serial adapter ids
+     * copied from linux/drivers/usb/serial/ftdi_sio.c
+     *
+     * Copyright (C) 2009 - 2010
+     *    Johan Hovold (jhovold@gmail.com)
+     * Copyright (C) 1999 - 2001
+     *    Greg Kroah-Hartman (greg@kroah.com)
+     *    Bill Ryder (bryder@sgi.com)
+     * Copyright (C) 2002
+     *    Kuba Ober (kuba@mareimbrium.org)
+     */
+    { USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
+    { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_FTX_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
+    { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
+    { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
+    { USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) },
+    { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+    { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
+    { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) },
+    { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) },
+    { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
+    { USB_DEVICE(OCT_VID, OCT_US101_PID) },
+    { USB_DEVICE(OCT_VID, OCT_DK201_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) },
+    { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
+    { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
+    { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
+    { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID) },
+    /*
+     * ELV devices:
+     */
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
+    { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
+    { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
+    { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
+    { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
+    { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
+    { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
+    { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
+    { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
+    { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
+    { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
+    { USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+    { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
+    { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) },
+    { USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) },
+    { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
+    { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
+    { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
+    { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
+    { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
+    { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
+    { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
+    { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
+    { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
+    { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
+    { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
+    { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
+    { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
+    { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) },
+    { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
+    { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
+    { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
+    { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
+    { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
+    { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID) },
+    { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+    { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+    { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
+    { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
+    { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
+    { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID) },
+    { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID) },
+    { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID) },
+    { USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID) },
+    { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID) },
+    { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID) },
+    { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
+    { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+
+    /* Papouch devices based on FTDI chip */
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) },
+    { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) },
+
+    { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
+    { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
+    { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
+    { USB_DEVICE(ATMEL_VID, STK541_PID) },
+    { USB_DEVICE(DE_VID, STB_PID) },
+    { USB_DEVICE(DE_VID, WHT_PID) },
+    { USB_DEVICE(ADI_VID, ADI_GNICE_PID) },
+    { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID) },
+    { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
+                                    0xff, 0xff, 0x00) },
+    { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
+    { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID) },
+    { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
+    { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+    { USB_DEVICE(FTDI_VID, PI_C865_PID) },
+    { USB_DEVICE(FTDI_VID, PI_C857_PID) },
+    { USB_DEVICE(PI_VID, PI_C866_PID) },
+    { USB_DEVICE(PI_VID, PI_C663_PID) },
+    { USB_DEVICE(PI_VID, PI_C725_PID) },
+    { USB_DEVICE(PI_VID, PI_E517_PID) },
+    { USB_DEVICE(PI_VID, PI_C863_PID) },
+    { USB_DEVICE(PI_VID, PI_E861_PID) },
+    { USB_DEVICE(PI_VID, PI_C867_PID) },
+    { USB_DEVICE(PI_VID, PI_E609_PID) },
+    { USB_DEVICE(PI_VID, PI_E709_PID) },
+    { USB_DEVICE(PI_VID, PI_100F_PID) },
+    { USB_DEVICE(PI_VID, PI_1011_PID) },
+    { USB_DEVICE(PI_VID, PI_1012_PID) },
+    { USB_DEVICE(PI_VID, PI_1013_PID) },
+    { USB_DEVICE(PI_VID, PI_1014_PID) },
+    { USB_DEVICE(PI_VID, PI_1015_PID) },
+    { USB_DEVICE(PI_VID, PI_1016_PID) },
+    { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
+    { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
+    { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID) },
+    { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID) },
+    { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+    { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
+    { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
+    { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
+    { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
+    { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
+    { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
+    { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
+    { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID) },
+    { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID) },
+    { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID) },
+    { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID) },
+    { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
+    { USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) },
+    { USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
+    { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID) },
+    { USB_DEVICE(ST_VID, ST_STMCLT1030_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
+    { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
+
+    { USB_DEVICE(-1, -1) } /* Terminating Entry */
+};
+
+#undef USB_DEVICE
+#undef USB_DEVICE_AND_INTERFACE_INFO
diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c
index bc36210..adac042 100644
--- a/hw/usb/redirect.c
+++ b/hw/usb/redirect.c
@@ -51,11 +51,13 @@
 
 typedef struct USBRedirDevice USBRedirDevice;
 
-/* Struct to hold buffered packets (iso or int input packets) */
+/* Struct to hold buffered packets */
 struct buf_packet {
     uint8_t *data;
-    int len;
-    int status;
+    void *free_on_destroy;
+    uint16_t len;
+    uint16_t offset;
+    uint8_t status;
     QTAILQ_ENTRY(buf_packet)next;
 };
 
@@ -69,11 +71,14 @@ struct endp_data {
     uint8_t iso_error; /* For reporting iso errors to the HC */
     uint8_t interrupt_started;
     uint8_t interrupt_error;
+    uint8_t bulk_receiving_enabled;
+    uint8_t bulk_receiving_started;
     uint8_t bufpq_prefilled;
     uint8_t bufpq_dropping_packets;
     QTAILQ_HEAD(, buf_packet) bufpq;
     int32_t bufpq_size;
     int32_t bufpq_target_size;
+    USBPacket *pending_async_packet;
 };
 
 struct PacketIdQueueEntry {
@@ -107,6 +112,7 @@ struct USBRedirDevice {
     struct endp_data endpoint[MAX_ENDPOINTS];
     struct PacketIdQueue cancelled;
     struct PacketIdQueue already_in_flight;
+    void (*buffered_bulk_in_complete)(USBRedirDevice *, USBPacket *, uint8_t);
     /* Data for device filtering */
     struct usb_redir_device_connect_header device_info;
     struct usb_redir_interface_info_header interface_info;
@@ -134,6 +140,8 @@ static void usbredir_interrupt_receiving_status(void *priv, uint64_t id,
     *interrupt_receiving_status);
 static void usbredir_bulk_streams_status(void *priv, uint64_t id,
     struct usb_redir_bulk_streams_status_header *bulk_streams_status);
+static void usbredir_bulk_receiving_status(void *priv, uint64_t id,
+    struct usb_redir_bulk_receiving_status_header *bulk_receiving_status);
 static void usbredir_control_packet(void *priv, uint64_t id,
     struct usb_redir_control_packet_header *control_packet,
     uint8_t *data, int data_len);
@@ -146,6 +154,9 @@ static void usbredir_iso_packet(void *priv, uint64_t id,
 static void usbredir_interrupt_packet(void *priv, uint64_t id,
     struct usb_redir_interrupt_packet_header *interrupt_header,
     uint8_t *data, int data_len);
+static void usbredir_buffered_bulk_packet(void *priv, uint64_t id,
+    struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet,
+    uint8_t *data, int data_len);
 
 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p,
     int status);
@@ -329,12 +340,19 @@ static void packet_id_queue_empty(struct PacketIdQueue *q)
 static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p)
 {
     USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+    int i = USBEP2I(p->ep);
 
     if (p->combined) {
         usb_combined_packet_cancel(udev, p);
         return;
     }
 
+    if (dev->endpoint[i].pending_async_packet) {
+        assert(dev->endpoint[i].pending_async_packet == p);
+        dev->endpoint[i].pending_async_packet = NULL;
+        return;
+    }
+
     packet_id_queue_add(&dev->cancelled, p->id);
     usbredirparser_send_cancel_data_packet(dev->parser, p->id);
     usbredirparser_do_write(dev->parser);
@@ -353,6 +371,11 @@ static void usbredir_fill_already_in_flight_from_ep(USBRedirDevice *dev,
 {
     static USBPacket *p;
 
+    /* async handled packets for bulk receiving eps do not count as inflight */
+    if (dev->endpoint[USBEP2I(ep)].bulk_receiving_started) {
+        return;
+    }
+
     QTAILQ_FOREACH(p, &ep->queue, queue) {
         /* Skip combined packets, except for the first */
         if (p->combined && p != p->combined->first) {
@@ -400,8 +423,8 @@ static USBPacket *usbredir_find_packet_by_id(USBRedirDevice *dev,
     return p;
 }
 
-static void bufp_alloc(USBRedirDevice *dev,
-    uint8_t *data, int len, int status, uint8_t ep)
+static void bufp_alloc(USBRedirDevice *dev, uint8_t *data, uint16_t len,
+    uint8_t status, uint8_t ep, void *free_on_destroy)
 {
     struct buf_packet *bufp;
 
@@ -425,7 +448,9 @@ static void bufp_alloc(USBRedirDevice *dev,
     bufp = g_malloc(sizeof(struct buf_packet));
     bufp->data   = data;
     bufp->len    = len;
+    bufp->offset = 0;
     bufp->status = status;
+    bufp->free_on_destroy = free_on_destroy;
     QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next);
     dev->endpoint[EP2I(ep)].bufpq_size++;
 }
@@ -435,7 +460,7 @@ static void bufp_free(USBRedirDevice *dev, struct buf_packet *bufp,
 {
     QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next);
     dev->endpoint[EP2I(ep)].bufpq_size--;
-    free(bufp->data);
+    free(bufp->free_on_destroy);
     g_free(bufp);
 }
 
@@ -586,19 +611,162 @@ static void usbredir_stop_iso_stream(USBRedirDevice *dev, uint8_t ep)
     usbredir_free_bufpq(dev, ep);
 }
 
+/*
+ * The usb-host may poll the endpoint faster then our guest, resulting in lots
+ * of smaller bulkp-s. The below buffered_bulk_in_complete* functions combine
+ * data from multiple bulkp-s into a single packet, avoiding bufpq overflows.
+ */
+static void usbredir_buffered_bulk_add_data_to_packet(USBRedirDevice *dev,
+    struct buf_packet *bulkp, int count, USBPacket *p, uint8_t ep)
+{
+    usb_packet_copy(p, bulkp->data + bulkp->offset, count);
+    bulkp->offset += count;
+    if (bulkp->offset == bulkp->len) {
+        /* Store status in the last packet with data from this bulkp */
+        usbredir_handle_status(dev, p, bulkp->status);
+        bufp_free(dev, bulkp, ep);
+    }
+}
+
+static void usbredir_buffered_bulk_in_complete_raw(USBRedirDevice *dev,
+    USBPacket *p, uint8_t ep)
+{
+    struct buf_packet *bulkp;
+    int count;
+
+    while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) &&
+           p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) {
+        count = bulkp->len - bulkp->offset;
+        if (count > (p->iov.size - p->actual_length)) {
+            count = p->iov.size - p->actual_length;
+        }
+        usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep);
+    }
+}
+
+static void usbredir_buffered_bulk_in_complete_ftdi(USBRedirDevice *dev,
+    USBPacket *p, uint8_t ep)
+{
+    const int maxp = dev->endpoint[EP2I(ep)].max_packet_size;
+    uint8_t header[2] = { 0, 0 };
+    struct buf_packet *bulkp;
+    int count;
+
+    while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) &&
+           p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) {
+        if (bulkp->len < 2) {
+            WARNING("malformed ftdi bulk in packet\n");
+            bufp_free(dev, bulkp, ep);
+            continue;
+        }
+
+        if ((p->actual_length % maxp) == 0) {
+            usb_packet_copy(p, bulkp->data, 2);
+            memcpy(header, bulkp->data, 2);
+        } else {
+            if (bulkp->data[0] != header[0] || bulkp->data[1] != header[1]) {
+                break; /* Different header, add to next packet */
+            }
+        }
+
+        if (bulkp->offset == 0) {
+            bulkp->offset = 2; /* Skip header */
+        }
+        count = bulkp->len - bulkp->offset;
+        /* Must repeat the header at maxp interval */
+        if (count > (maxp - (p->actual_length % maxp))) {
+            count = maxp - (p->actual_length % maxp);
+        }
+        usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep);
+    }
+}
+
+static void usbredir_buffered_bulk_in_complete(USBRedirDevice *dev,
+    USBPacket *p, uint8_t ep)
+{
+    p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */
+    dev->buffered_bulk_in_complete(dev, p, ep);
+    DPRINTF("bulk-token-in ep %02X status %d len %d id %"PRIu64"\n",
+            ep, p->status, p->actual_length, p->id);
+}
+
+static void usbredir_handle_buffered_bulk_in_data(USBRedirDevice *dev,
+    USBPacket *p, uint8_t ep)
+{
+    /* Input bulk endpoint, buffered packet input */
+    if (!dev->endpoint[EP2I(ep)].bulk_receiving_started) {
+        int bpt;
+        struct usb_redir_start_bulk_receiving_header start = {
+            .endpoint = ep,
+            .stream_id = 0,
+            .no_transfers = 5,
+        };
+        /* Round bytes_per_transfer up to a multiple of max_packet_size */
+        bpt = 512 + dev->endpoint[EP2I(ep)].max_packet_size - 1;
+        bpt /= dev->endpoint[EP2I(ep)].max_packet_size;
+        bpt *= dev->endpoint[EP2I(ep)].max_packet_size;
+        start.bytes_per_transfer = bpt;
+        /* No id, we look at the ep when receiving a status back */
+        usbredirparser_send_start_bulk_receiving(dev->parser, 0, &start);
+        usbredirparser_do_write(dev->parser);
+        DPRINTF("bulk receiving started bytes/transfer %u count %d ep %02X\n",
+                start.bytes_per_transfer, start.no_transfers, ep);
+        dev->endpoint[EP2I(ep)].bulk_receiving_started = 1;
+        /* We don't really want to drop bulk packets ever, but
+           having some upper limit to how much we buffer is good. */
+        dev->endpoint[EP2I(ep)].bufpq_target_size = 5000;
+        dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0;
+    }
+
+    if (QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq)) {
+        DPRINTF("bulk-token-in ep %02X, no bulkp\n", ep);
+        assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL);
+        dev->endpoint[EP2I(ep)].pending_async_packet = p;
+        p->status = USB_RET_ASYNC;
+        return;
+    }
+    usbredir_buffered_bulk_in_complete(dev, p, ep);
+}
+
+static void usbredir_stop_bulk_receiving(USBRedirDevice *dev, uint8_t ep)
+{
+    struct usb_redir_stop_bulk_receiving_header stop_bulk = {
+        .endpoint = ep,
+        .stream_id = 0,
+    };
+    if (dev->endpoint[EP2I(ep)].bulk_receiving_started) {
+        usbredirparser_send_stop_bulk_receiving(dev->parser, 0, &stop_bulk);
+        DPRINTF("bulk receiving stopped ep %02X\n", ep);
+        dev->endpoint[EP2I(ep)].bulk_receiving_started = 0;
+    }
+    usbredir_free_bufpq(dev, ep);
+}
+
 static void usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p,
                                       uint8_t ep)
 {
     struct usb_redir_bulk_packet_header bulk_packet;
     size_t size = (p->combined) ? p->combined->iov.size : p->iov.size;
-
-    DPRINTF("bulk-out ep %02X len %zd id %"PRIu64"\n", ep, size, p->id);
+    const int maxp = dev->endpoint[EP2I(ep)].max_packet_size;
 
     if (usbredir_already_in_flight(dev, p->id)) {
         p->status = USB_RET_ASYNC;
         return;
     }
 
+    if (dev->endpoint[EP2I(ep)].bulk_receiving_enabled) {
+        if (size != 0 && (size % maxp) == 0) {
+            usbredir_handle_buffered_bulk_in_data(dev, p, ep);
+            return;
+        }
+        WARNING("bulk recv invalid size %zd ep %02x, disabling\n", size, ep);
+        assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL);
+        usbredir_stop_bulk_receiving(dev, ep);
+        dev->endpoint[EP2I(ep)].bulk_receiving_enabled = 0;
+    }
+
+    DPRINTF("bulk-out ep %02X len %zd id %"PRIu64"\n", ep, size, p->id);
+
     bulk_packet.endpoint  = ep;
     bulk_packet.length    = size;
     bulk_packet.stream_id = 0;
@@ -735,9 +903,6 @@ static void usbredir_handle_data(USBDevice *udev, USBPacket *p)
         ERROR("handle_data called for control transfer on ep %02X\n", ep);
         p->status = USB_RET_NAK;
         break;
-    case USB_ENDPOINT_XFER_ISOC:
-        usbredir_handle_iso_data(dev, p, ep);
-        break;
     case USB_ENDPOINT_XFER_BULK:
         if (p->state == USB_PACKET_SETUP && p->pid == USB_TOKEN_IN &&
                 p->ep->pipeline) {
@@ -746,6 +911,9 @@ static void usbredir_handle_data(USBDevice *udev, USBPacket *p)
         }
         usbredir_handle_bulk_data(dev, p, ep);
         break;
+    case USB_ENDPOINT_XFER_ISOC:
+        usbredir_handle_iso_data(dev, p, ep);
+        break;
     case USB_ENDPOINT_XFER_INT:
         if (ep & USB_DIR_IN) {
             usbredir_handle_interrupt_in_data(dev, p, ep);
@@ -772,6 +940,11 @@ static void usbredir_stop_ep(USBRedirDevice *dev, int i)
     uint8_t ep = I2EP(i);
 
     switch (dev->endpoint[i].type) {
+    case USB_ENDPOINT_XFER_BULK:
+        if (ep & USB_DIR_IN) {
+            usbredir_stop_bulk_receiving(dev, ep);
+        }
+        break;
     case USB_ENDPOINT_XFER_ISOC:
         usbredir_stop_iso_stream(dev, ep);
         break;
@@ -951,10 +1124,12 @@ static void usbredir_create_parser(USBRedirDevice *dev)
     dev->parser->interrupt_receiving_status_func =
         usbredir_interrupt_receiving_status;
     dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status;
+    dev->parser->bulk_receiving_status_func = usbredir_bulk_receiving_status;
     dev->parser->control_packet_func = usbredir_control_packet;
     dev->parser->bulk_packet_func = usbredir_bulk_packet;
     dev->parser->iso_packet_func = usbredir_iso_packet;
     dev->parser->interrupt_packet_func = usbredir_interrupt_packet;
+    dev->parser->buffered_bulk_packet_func = usbredir_buffered_bulk_packet;
     dev->read_buf = NULL;
     dev->read_buf_size = 0;
 
@@ -963,6 +1138,7 @@ static void usbredir_create_parser(USBRedirDevice *dev)
     usbredirparser_caps_set_cap(caps, usb_redir_cap_ep_info_max_packet_size);
     usbredirparser_caps_set_cap(caps, usb_redir_cap_64bits_ids);
     usbredirparser_caps_set_cap(caps, usb_redir_cap_32bits_bulk_length);
+    usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_receiving);
 
     if (runstate_check(RUN_STATE_INMIGRATE)) {
         flags |= usbredirparser_fl_no_hello;
@@ -1214,6 +1390,52 @@ error:
     return -1;
 }
 
+static void usbredir_check_bulk_receiving(USBRedirDevice *dev)
+{
+    int i, j, quirks;
+
+    if (!usbredirparser_peer_has_cap(dev->parser,
+                                     usb_redir_cap_bulk_receiving)) {
+        return;
+    }
+
+    for (i = EP2I(USB_DIR_IN); i < MAX_ENDPOINTS; i++) {
+        dev->endpoint[i].bulk_receiving_enabled = 0;
+    }
+    for (i = 0; i < dev->interface_info.interface_count; i++) {
+        quirks = usb_get_quirks(dev->device_info.vendor_id,
+                                dev->device_info.product_id,
+                                dev->interface_info.interface_class[i],
+                                dev->interface_info.interface_subclass[i],
+                                dev->interface_info.interface_protocol[i]);
+        if (!(quirks & USB_QUIRK_BUFFER_BULK_IN)) {
+            continue;
+        }       
+        if (quirks & USB_QUIRK_IS_FTDI) {
+            dev->buffered_bulk_in_complete =
+                usbredir_buffered_bulk_in_complete_ftdi;
+        } else {
+            dev->buffered_bulk_in_complete =
+                usbredir_buffered_bulk_in_complete_raw;
+        }
+
+        for (j = EP2I(USB_DIR_IN); j < MAX_ENDPOINTS; j++) {
+            if (dev->endpoint[j].interface ==
+                                    dev->interface_info.interface[i] &&
+                    dev->endpoint[j].type == USB_ENDPOINT_XFER_BULK &&
+                    dev->endpoint[j].max_packet_size != 0) {
+                dev->endpoint[j].bulk_receiving_enabled = 1;
+                /*
+                 * With buffering pipelining is not necessary. Also packet
+                 * combining and bulk in buffering don't play nice together!
+                 */
+                I2USBEP(dev, j)->pipeline = false;
+                break; /* Only buffer for the first ep of each intf */
+            }
+        }
+    }
+}
+
 /*
  * usbredirparser packet complete callbacks
  */
@@ -1322,6 +1544,7 @@ static void usbredir_device_connect(void *priv,
         return;
     }
 
+    usbredir_check_bulk_receiving(dev);
     qemu_mod_timer(dev->attach_timer, dev->next_attach_time);
 }
 
@@ -1360,9 +1583,10 @@ static void usbredir_interface_info(void *priv,
 
     /*
      * If we receive interface info after the device has already been
-     * connected (ie on a set_config), re-check the filter.
+     * connected (ie on a set_config), re-check interface dependent things.
      */
     if (qemu_timer_pending(dev->attach_timer) || dev->dev.attached) {
+        usbredir_check_bulk_receiving(dev);
         if (usbredir_check_filter(dev)) {
             ERROR("Device no longer matches filter after interface info "
                   "change, disconnecting!\n");
@@ -1463,6 +1687,7 @@ static void usbredir_ep_info(void *priv,
         return;
     }
     usbredir_setup_usb_eps(dev);
+    usbredir_check_bulk_receiving(dev);
 }
 
 static void usbredir_configuration_status(void *priv, uint64_t id,
@@ -1553,6 +1778,25 @@ static void usbredir_bulk_streams_status(void *priv, uint64_t id,
 {
 }
 
+static void usbredir_bulk_receiving_status(void *priv, uint64_t id,
+    struct usb_redir_bulk_receiving_status_header *bulk_receiving_status)
+{
+    USBRedirDevice *dev = priv;
+    uint8_t ep = bulk_receiving_status->endpoint;
+
+    DPRINTF("bulk recv status %d ep %02X id %"PRIu64"\n",
+            bulk_receiving_status->status, ep, id);
+
+    if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].bulk_receiving_started) {
+        return;
+    }
+
+    if (bulk_receiving_status->status == usb_redir_stall) {
+        DPRINTF("bulk receiving stopped by peer ep %02X\n", ep);
+        dev->endpoint[EP2I(ep)].bulk_receiving_started = 0;
+    }
+}
+
 static void usbredir_control_packet(void *priv, uint64_t id,
     struct usb_redir_control_packet_header *control_packet,
     uint8_t *data, int data_len)
@@ -1658,7 +1902,7 @@ static void usbredir_iso_packet(void *priv, uint64_t id,
     }
 
     /* bufp_alloc also adds the packet to the ep queue */
-    bufp_alloc(dev, data, data_len, iso_packet->status, ep);
+    bufp_alloc(dev, data, data_len, iso_packet->status, ep, data);
 }
 
 static void usbredir_interrupt_packet(void *priv, uint64_t id,
@@ -1689,7 +1933,7 @@ static void usbredir_interrupt_packet(void *priv, uint64_t id,
         }
 
         /* bufp_alloc also adds the packet to the ep queue */
-        bufp_alloc(dev, data, data_len, interrupt_packet->status, ep);
+        bufp_alloc(dev, data, data_len, interrupt_packet->status, ep, data);
     } else {
         /*
          * We report output interrupt packets as completed directly upon
@@ -1702,6 +1946,52 @@ static void usbredir_interrupt_packet(void *priv, uint64_t id,
     }
 }
 
+static void usbredir_buffered_bulk_packet(void *priv, uint64_t id,
+    struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet,
+    uint8_t *data, int data_len)
+{
+    USBRedirDevice *dev = priv;
+    uint8_t status, ep = buffered_bulk_packet->endpoint;
+    void *free_on_destroy;
+    int i, len;
+
+    DPRINTF("buffered-bulk-in status %d ep %02X len %d id %"PRIu64"\n",
+            buffered_bulk_packet->status, ep, data_len, id);
+
+    if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_BULK) {
+        ERROR("received buffered-bulk packet for non bulk ep %02X\n", ep);
+        free(data);
+        return;
+    }
+
+    if (dev->endpoint[EP2I(ep)].bulk_receiving_started == 0) {
+        DPRINTF("received buffered-bulk packet on not started ep %02X\n", ep);
+        free(data);
+        return;
+    }
+
+    /* Data must be in maxp chunks for buffered_bulk_add_*_data_to_packet */
+    len = dev->endpoint[EP2I(ep)].max_packet_size;
+    status = usb_redir_success;
+    free_on_destroy = NULL;
+    for (i = 0; i < data_len; i += len) {
+        if (len >= (data_len - i)) {
+            len = data_len - i;
+            status = buffered_bulk_packet->status;
+            free_on_destroy = data;
+        }
+        /* bufp_alloc also adds the packet to the ep queue */
+        bufp_alloc(dev, data + i, len, status, ep, free_on_destroy);
+    }
+
+    if (dev->endpoint[EP2I(ep)].pending_async_packet) {
+        USBPacket *p = dev->endpoint[EP2I(ep)].pending_async_packet;
+        dev->endpoint[EP2I(ep)].pending_async_packet = NULL;
+        usbredir_buffered_bulk_in_complete(dev, p, ep);
+        usb_packet_complete(&dev->dev, p);
+    }
+}
+
 /*
  * Migration code
  */
@@ -1736,6 +2026,7 @@ static int usbredir_post_load(void *priv, int version_id)
     dev->dev.speedmask = (1 << dev->dev.speed);
 
     usbredir_setup_usb_eps(dev);
+    usbredir_check_bulk_receiving(dev);
 
     return 0;
 }
@@ -1809,15 +2100,16 @@ static void usbredir_put_bufpq(QEMUFile *f, void *priv, size_t unused)
     struct endp_data *endp = priv;
     USBRedirDevice *dev = endp->dev;
     struct buf_packet *bufp;
-    int i = 0;
+    int len, i = 0;
 
     qemu_put_be32(f, endp->bufpq_size);
     QTAILQ_FOREACH(bufp, &endp->bufpq, next) {
+        len = bufp->len - bufp->offset;
         DPRINTF("put_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size,
-                bufp->len, bufp->status);
-        qemu_put_be32(f, bufp->len);
+                len, bufp->status);
+        qemu_put_be32(f, len);
         qemu_put_be32(f, bufp->status);
-        qemu_put_buffer(f, bufp->data, bufp->len);
+        qemu_put_buffer(f, bufp->data + bufp->offset, len);
         i++;
     }
     assert(i == endp->bufpq_size);
@@ -1835,7 +2127,9 @@ static int usbredir_get_bufpq(QEMUFile *f, void *priv, size_t unused)
         bufp = g_malloc(sizeof(struct buf_packet));
         bufp->len = qemu_get_be32(f);
         bufp->status = qemu_get_be32(f);
+        bufp->offset = 0;
         bufp->data = qemu_oom_check(malloc(bufp->len)); /* regular malloc! */
+        bufp->free_on_destroy = bufp->data;
         qemu_get_buffer(f, bufp->data, bufp->len);
         QTAILQ_INSERT_TAIL(&endp->bufpq, bufp, next);
         DPRINTF("get_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size,
@@ -1852,6 +2146,23 @@ static const VMStateInfo usbredir_ep_bufpq_vmstate_info = {
 
 
 /* For endp_data migration */
+static const VMStateDescription usbredir_bulk_receiving_vmstate = {
+    .name = "usb-redir-ep/bulk-receiving",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT8(bulk_receiving_started, struct endp_data),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static bool usbredir_bulk_receiving_needed(void *priv)
+{
+    struct endp_data *endp = priv;
+
+    return endp->bulk_receiving_started;
+}
+
 static const VMStateDescription usbredir_ep_vmstate = {
     .name = "usb-redir-ep",
     .version_id = 1,
@@ -1878,6 +2189,14 @@ static const VMStateDescription usbredir_ep_vmstate = {
         },
         VMSTATE_INT32(bufpq_target_size, struct endp_data),
         VMSTATE_END_OF_LIST()
+    },
+    .subsections = (VMStateSubsection[]) {
+        {
+            .vmsd = &usbredir_bulk_receiving_vmstate,
+            .needed = usbredir_bulk_receiving_needed,
+        }, {
+            /* empty */
+        }
     }
 };
 
