Message ID | 1345507175-7248-2-git-send-email-ronniesahlberg@gmail.com |
---|---|
State | New |
Headers | show |
Il 21/08/2012 01:59, Ronnie Sahlberg ha scritto: > We need to support SG_IO in the synchronous bdrv_ioctl() since this > is used by scsi-block > > Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> > --- > block/iscsi.c | 109 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++- > 1 files changed, 108 insertions(+), 1 deletions(-) > > diff --git a/block/iscsi.c b/block/iscsi.c > index 993a86d..9e98bfe 100644 > --- a/block/iscsi.c > +++ b/block/iscsi.c > @@ -548,7 +548,8 @@ iscsi_aio_ioctl_cb(struct iscsi_context *iscsi, int status, > > #define SG_ERR_DRIVER_SENSE 0x08 > > - if (status == SCSI_STATUS_CHECK_CONDITION && acb->task->datain.size >= 2) { > + if (status == SCSI_STATUS_CHECK_CONDITION > + && acb->task->datain.size >= 2) { > int ss; > > acb->ioh->driver_status |= SG_ERR_DRIVER_SENSE; > @@ -633,9 +634,53 @@ static BlockDriverAIOCB *iscsi_aio_ioctl(BlockDriverState *bs, > return &acb->common; > } > > +struct IoctlTask { > + int status; > + int complete; > + sg_io_hdr_t *ioh; > + struct scsi_task *task; > +}; > + > +static void > +iscsi_ioctl_cb(struct iscsi_context *iscsi, int status, > + void *command_data, void *opaque) > +{ > + struct IoctlTask *itask = opaque; > + > + if (status < 0) { > + error_report("Failed to ioctl(SG_IO) to iSCSI lun. %s", > + iscsi_get_error(iscsi)); > + itask->status = -EIO; > + } > + > + itask->ioh->driver_status = 0; > + itask->ioh->host_status = 0; > + itask->ioh->resid = 0; > + > +#define SG_ERR_DRIVER_SENSE 0x08 > + > + if (status == SCSI_STATUS_CHECK_CONDITION > + && itask->task->datain.size >= 2) { > + int ss; > + > + itask->ioh->driver_status |= SG_ERR_DRIVER_SENSE; > + > + itask->ioh->sb_len_wr = itask->task->datain.size - 2; > + ss = (itask->ioh->mx_sb_len >= itask->ioh->sb_len_wr) ? > + itask->ioh->mx_sb_len : itask->ioh->sb_len_wr; > + memcpy(itask->ioh->sbp, &itask->task->datain.data[2], ss); > + } > + > + itask->complete = 1; > +} > + > static int iscsi_ioctl(BlockDriverState *bs, unsigned long int req, void *buf) > { > IscsiLun *iscsilun = bs->opaque; > + struct iscsi_context *iscsi = iscsilun->iscsi; > + struct IoctlTask itask; > + struct scsi_task *task; > + struct iscsi_data data; > > switch (req) { > case SG_GET_VERSION_NUM: > @@ -644,6 +689,68 @@ static int iscsi_ioctl(BlockDriverState *bs, unsigned long int req, void *buf) > case SG_GET_SCSI_ID: > ((struct sg_scsi_id *)buf)->scsi_type = iscsilun->type; > break; > + case SG_IO: > + itask.ioh = buf; > + task = malloc(sizeof(struct scsi_task)); > + if (task == NULL) { > + error_report("iSCSI: Failed to allocate task for scsi command. %s", > + iscsi_get_error(iscsi)); > + return -1; > + } > + memset(task, 0, sizeof(struct scsi_task)); > + > + switch (itask.ioh->dxfer_direction) { > + case SG_DXFER_TO_DEV: > + task->xfer_dir = SCSI_XFER_WRITE; > + break; > + case SG_DXFER_FROM_DEV: > + task->xfer_dir = SCSI_XFER_READ; > + break; > + default: > + task->xfer_dir = SCSI_XFER_NONE; > + break; > + } > + task->cdb_size = itask.ioh->cmd_len; > + memcpy(&task->cdb[0], itask.ioh->cmdp, itask.ioh->cmd_len); > + task->expxferlen = itask.ioh->dxfer_len; > + > + if (task->xfer_dir == SCSI_XFER_WRITE) { > + data.data = itask.ioh->dxferp; > + data.size = itask.ioh->dxfer_len; > + } > + > + if (iscsi_scsi_command_async(iscsi, iscsilun->lun, task, > + iscsi_ioctl_cb, > + (task->xfer_dir == SCSI_XFER_WRITE) ? > + &data : NULL, > + &itask) != 0) { > + scsi_free_scsi_task(task); > + return -1; > + } > + > + /* tell libiscsi to read straight into the buffer we got from ioctl */ > + if (task->xfer_dir == SCSI_XFER_READ) { > + scsi_task_add_data_in_buffer(task, > + itask.ioh->dxfer_len, > + itask.ioh->dxferp); > + } > + > + itask.complete = 0; > + itask.status = 0; > + itask.task = task; > + while (!itask.complete) { > + iscsi_set_events(iscsilun); > + qemu_aio_wait(); > + } > + scsi_free_scsi_task(task); > + > + if (itask.status != 0) { > + error_report("iSCSI: Failed to send async command to target : %s", > + iscsi_get_error(iscsi)); > + return -1; > + } > + > + return 0; > default: > return -1; > } > Lots of duplicate code, can you just call bdrv_aio_ioctl with a callback that is as simple as int *p_status = opaque; *p_status = status; and then status = -EINPROGRESS; bdrv_aio_ioctl(..., ioctl_cb, &status); while (status == -EINPROGRESS) { qemu_aio_wait(); } ? The iscsi_set_events should not be needed because bdrv_aio_ioctl calls it. Paolo
diff --git a/block/iscsi.c b/block/iscsi.c index 993a86d..9e98bfe 100644 --- a/block/iscsi.c +++ b/block/iscsi.c @@ -548,7 +548,8 @@ iscsi_aio_ioctl_cb(struct iscsi_context *iscsi, int status, #define SG_ERR_DRIVER_SENSE 0x08 - if (status == SCSI_STATUS_CHECK_CONDITION && acb->task->datain.size >= 2) { + if (status == SCSI_STATUS_CHECK_CONDITION + && acb->task->datain.size >= 2) { int ss; acb->ioh->driver_status |= SG_ERR_DRIVER_SENSE; @@ -633,9 +634,53 @@ static BlockDriverAIOCB *iscsi_aio_ioctl(BlockDriverState *bs, return &acb->common; } +struct IoctlTask { + int status; + int complete; + sg_io_hdr_t *ioh; + struct scsi_task *task; +}; + +static void +iscsi_ioctl_cb(struct iscsi_context *iscsi, int status, + void *command_data, void *opaque) +{ + struct IoctlTask *itask = opaque; + + if (status < 0) { + error_report("Failed to ioctl(SG_IO) to iSCSI lun. %s", + iscsi_get_error(iscsi)); + itask->status = -EIO; + } + + itask->ioh->driver_status = 0; + itask->ioh->host_status = 0; + itask->ioh->resid = 0; + +#define SG_ERR_DRIVER_SENSE 0x08 + + if (status == SCSI_STATUS_CHECK_CONDITION + && itask->task->datain.size >= 2) { + int ss; + + itask->ioh->driver_status |= SG_ERR_DRIVER_SENSE; + + itask->ioh->sb_len_wr = itask->task->datain.size - 2; + ss = (itask->ioh->mx_sb_len >= itask->ioh->sb_len_wr) ? + itask->ioh->mx_sb_len : itask->ioh->sb_len_wr; + memcpy(itask->ioh->sbp, &itask->task->datain.data[2], ss); + } + + itask->complete = 1; +} + static int iscsi_ioctl(BlockDriverState *bs, unsigned long int req, void *buf) { IscsiLun *iscsilun = bs->opaque; + struct iscsi_context *iscsi = iscsilun->iscsi; + struct IoctlTask itask; + struct scsi_task *task; + struct iscsi_data data; switch (req) { case SG_GET_VERSION_NUM: @@ -644,6 +689,68 @@ static int iscsi_ioctl(BlockDriverState *bs, unsigned long int req, void *buf) case SG_GET_SCSI_ID: ((struct sg_scsi_id *)buf)->scsi_type = iscsilun->type; break; + case SG_IO: + itask.ioh = buf; + task = malloc(sizeof(struct scsi_task)); + if (task == NULL) { + error_report("iSCSI: Failed to allocate task for scsi command. %s", + iscsi_get_error(iscsi)); + return -1; + } + memset(task, 0, sizeof(struct scsi_task)); + + switch (itask.ioh->dxfer_direction) { + case SG_DXFER_TO_DEV: + task->xfer_dir = SCSI_XFER_WRITE; + break; + case SG_DXFER_FROM_DEV: + task->xfer_dir = SCSI_XFER_READ; + break; + default: + task->xfer_dir = SCSI_XFER_NONE; + break; + } + task->cdb_size = itask.ioh->cmd_len; + memcpy(&task->cdb[0], itask.ioh->cmdp, itask.ioh->cmd_len); + task->expxferlen = itask.ioh->dxfer_len; + + if (task->xfer_dir == SCSI_XFER_WRITE) { + data.data = itask.ioh->dxferp; + data.size = itask.ioh->dxfer_len; + } + + if (iscsi_scsi_command_async(iscsi, iscsilun->lun, task, + iscsi_ioctl_cb, + (task->xfer_dir == SCSI_XFER_WRITE) ? + &data : NULL, + &itask) != 0) { + scsi_free_scsi_task(task); + return -1; + } + + /* tell libiscsi to read straight into the buffer we got from ioctl */ + if (task->xfer_dir == SCSI_XFER_READ) { + scsi_task_add_data_in_buffer(task, + itask.ioh->dxfer_len, + itask.ioh->dxferp); + } + + itask.complete = 0; + itask.status = 0; + itask.task = task; + while (!itask.complete) { + iscsi_set_events(iscsilun); + qemu_aio_wait(); + } + scsi_free_scsi_task(task); + + if (itask.status != 0) { + error_report("iSCSI: Failed to send async command to target : %s", + iscsi_get_error(iscsi)); + return -1; + } + + return 0; default: return -1; }
We need to support SG_IO in the synchronous bdrv_ioctl() since this is used by scsi-block Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> --- block/iscsi.c | 109 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 108 insertions(+), 1 deletions(-)