Message ID | 1342215040-16128-2-git-send-email-ronniesahlberg@gmail.com |
---|---|
State | New |
Headers | show |
Il 13/07/2012 23:30, Ronnie Sahlberg ha scritto: > Add sense code for DATA_PROTECT/WRITE_PROTECTED and return this error > for any WRITE*/WRITE_VERIFY* calls if the device is readonly=on, > i.e. write-protected > > Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Applied, thanks! Paolo > --- > hw/scsi-bus.c | 5 +++++ > hw/scsi-disk.c | 16 +++++++++++++--- > hw/scsi.h | 2 ++ > 3 files changed, 20 insertions(+), 3 deletions(-) > > diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c > index 5ad1013..6299094 100644 > --- a/hw/scsi-bus.c > +++ b/hw/scsi-bus.c > @@ -1172,6 +1172,11 @@ const struct SCSISense sense_code_DEVICE_INTERNAL_RESET = { > .key = UNIT_ATTENTION, .asc = 0x29, .ascq = 0x04 > }; > > +/* Data Protection, Write Protected */ > +const struct SCSISense sense_code_WRITE_PROTECTED = { > + .key = DATA_PROTECT, .asc = 0x27, .ascq = 0x00 > +}; > + > /* > * scsi_build_sense > * > diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c > index 2c2be33..0aca383 100644 > --- a/hw/scsi-disk.c > +++ b/hw/scsi-disk.c > @@ -1565,9 +1565,6 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf) > r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512); > r->sector_count = len * (s->qdev.blocksize / 512); > break; > - case VERIFY_10: > - case VERIFY_12: > - case VERIFY_16: > case WRITE_6: > case WRITE_10: > case WRITE_12: > @@ -1575,6 +1572,13 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf) > case WRITE_VERIFY_10: > case WRITE_VERIFY_12: > case WRITE_VERIFY_16: > + if (bdrv_is_read_only(s->qdev.conf.bs)) { > + goto write_protect; > + } > + /* fallthough */ > + case VERIFY_10: > + case VERIFY_12: > + case VERIFY_16: > len = r->req.cmd.xfer / s->qdev.blocksize; > DPRINTF("Write %s(sector %" PRId64 ", count %d)\n", > (command & 0xe) == 0xe ? "And Verify " : "", > @@ -1621,6 +1625,9 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf) > DPRINTF("WRITE SAME() (sector %" PRId64 ", count %d)\n", > r->req.cmd.lba, len); > > + if (bdrv_is_read_only(s->qdev.conf.bs)) { > + goto write_protect; > + } > if (r->req.cmd.lba > s->qdev.max_lba) { > goto illegal_lba; > } > @@ -1651,6 +1658,9 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf) > illegal_lba: > scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE)); > return 0; > + write_protect: > + scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED)); > + return 0; > } > if (r->sector_count == 0 && r->iov.iov_len == 0) { > scsi_req_complete(&r->req, GOOD); > diff --git a/hw/scsi.h b/hw/scsi.h > index 76f06d4..94d2962 100644 > --- a/hw/scsi.h > +++ b/hw/scsi.h > @@ -202,6 +202,8 @@ extern const struct SCSISense sense_code_MEDIUM_CHANGED; > extern const struct SCSISense sense_code_REPORTED_LUNS_CHANGED; > /* Unit attention, Device internal reset */ > extern const struct SCSISense sense_code_DEVICE_INTERNAL_RESET; > +/* Data Protection, Write Protected */ > +extern const struct SCSISense sense_code_WRITE_PROTECTED; > > #define SENSE_CODE(x) sense_code_ ## x > >
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c index 5ad1013..6299094 100644 --- a/hw/scsi-bus.c +++ b/hw/scsi-bus.c @@ -1172,6 +1172,11 @@ const struct SCSISense sense_code_DEVICE_INTERNAL_RESET = { .key = UNIT_ATTENTION, .asc = 0x29, .ascq = 0x04 }; +/* Data Protection, Write Protected */ +const struct SCSISense sense_code_WRITE_PROTECTED = { + .key = DATA_PROTECT, .asc = 0x27, .ascq = 0x00 +}; + /* * scsi_build_sense * diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c index 2c2be33..0aca383 100644 --- a/hw/scsi-disk.c +++ b/hw/scsi-disk.c @@ -1565,9 +1565,6 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf) r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512); r->sector_count = len * (s->qdev.blocksize / 512); break; - case VERIFY_10: - case VERIFY_12: - case VERIFY_16: case WRITE_6: case WRITE_10: case WRITE_12: @@ -1575,6 +1572,13 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf) case WRITE_VERIFY_10: case WRITE_VERIFY_12: case WRITE_VERIFY_16: + if (bdrv_is_read_only(s->qdev.conf.bs)) { + goto write_protect; + } + /* fallthough */ + case VERIFY_10: + case VERIFY_12: + case VERIFY_16: len = r->req.cmd.xfer / s->qdev.blocksize; DPRINTF("Write %s(sector %" PRId64 ", count %d)\n", (command & 0xe) == 0xe ? "And Verify " : "", @@ -1621,6 +1625,9 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf) DPRINTF("WRITE SAME() (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len); + if (bdrv_is_read_only(s->qdev.conf.bs)) { + goto write_protect; + } if (r->req.cmd.lba > s->qdev.max_lba) { goto illegal_lba; } @@ -1651,6 +1658,9 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf) illegal_lba: scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE)); return 0; + write_protect: + scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED)); + return 0; } if (r->sector_count == 0 && r->iov.iov_len == 0) { scsi_req_complete(&r->req, GOOD); diff --git a/hw/scsi.h b/hw/scsi.h index 76f06d4..94d2962 100644 --- a/hw/scsi.h +++ b/hw/scsi.h @@ -202,6 +202,8 @@ extern const struct SCSISense sense_code_MEDIUM_CHANGED; extern const struct SCSISense sense_code_REPORTED_LUNS_CHANGED; /* Unit attention, Device internal reset */ extern const struct SCSISense sense_code_DEVICE_INTERNAL_RESET; +/* Data Protection, Write Protected */ +extern const struct SCSISense sense_code_WRITE_PROTECTED; #define SENSE_CODE(x) sense_code_ ## x
Add sense code for DATA_PROTECT/WRITE_PROTECTED and return this error for any WRITE*/WRITE_VERIFY* calls if the device is readonly=on, i.e. write-protected Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> --- hw/scsi-bus.c | 5 +++++ hw/scsi-disk.c | 16 +++++++++++++--- hw/scsi.h | 2 ++ 3 files changed, 20 insertions(+), 3 deletions(-)