@@ -228,13 +228,14 @@ typedef struct {
PCIDevice dev;
/* Hash register (multicast mask array, multiple individual addresses). */
uint8_t mult[8];
- int mmio_index;
+ MemoryRegion mmio_bar;
+ MemoryRegion io_bar;
+ MemoryRegion flash_bar;
NICState *nic;
NICConf conf;
uint8_t scb_stat; /* SCB stat/ack byte */
uint8_t int_stat; /* PCI interrupt status */
/* region must not be saved by nic_save. */
- uint32_t region1; /* PCI region 1 address */
uint16_t mdimem[32];
eeprom_t *eeprom;
uint32_t device; /* device variant */
@@ -1584,147 +1585,36 @@ static void eepro100_write4(EEPRO100State * s, uint32_t addr, uint32_t val)
}
}
-/*****************************************************************************
- *
- * Port mapped I/O.
- *
- ****************************************************************************/
-
-static uint32_t ioport_read1(void *opaque, uint32_t addr)
-{
- EEPRO100State *s = opaque;
-#if 0
- logout("addr=%s\n", regname(addr));
-#endif
- return eepro100_read1(s, addr - s->region1);
-}
-
-static uint32_t ioport_read2(void *opaque, uint32_t addr)
-{
- EEPRO100State *s = opaque;
- return eepro100_read2(s, addr - s->region1);
-}
-
-static uint32_t ioport_read4(void *opaque, uint32_t addr)
-{
- EEPRO100State *s = opaque;
- return eepro100_read4(s, addr - s->region1);
-}
-
-static void ioport_write1(void *opaque, uint32_t addr, uint32_t val)
-{
- EEPRO100State *s = opaque;
-#if 0
- logout("addr=%s val=0x%02x\n", regname(addr), val);
-#endif
- eepro100_write1(s, addr - s->region1, val);
-}
-
-static void ioport_write2(void *opaque, uint32_t addr, uint32_t val)
-{
- EEPRO100State *s = opaque;
- eepro100_write2(s, addr - s->region1, val);
-}
-
-static void ioport_write4(void *opaque, uint32_t addr, uint32_t val)
-{
- EEPRO100State *s = opaque;
- eepro100_write4(s, addr - s->region1, val);
-}
-
-/***********************************************************/
-/* PCI EEPRO100 definitions */
-
-static void pci_map(PCIDevice * pci_dev, int region_num,
- pcibus_t addr, pcibus_t size, int type)
-{
- EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
-
- TRACE(OTHER, logout("region %d, addr=0x%08"FMT_PCIBUS", "
- "size=0x%08"FMT_PCIBUS", type=%d\n",
- region_num, addr, size, type));
-
- assert(region_num == 1);
- register_ioport_write(addr, size, 1, ioport_write1, s);
- register_ioport_read(addr, size, 1, ioport_read1, s);
- register_ioport_write(addr, size, 2, ioport_write2, s);
- register_ioport_read(addr, size, 2, ioport_read2, s);
- register_ioport_write(addr, size, 4, ioport_write4, s);
- register_ioport_read(addr, size, 4, ioport_read4, s);
-
- s->region1 = addr;
-}
-
-/*****************************************************************************
- *
- * Memory mapped I/O.
- *
- ****************************************************************************/
-
-static void pci_mmio_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
-{
- EEPRO100State *s = opaque;
-#if 0
- logout("addr=%s val=0x%02x\n", regname(addr), val);
-#endif
- eepro100_write1(s, addr, val);
-}
-
-static void pci_mmio_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
+static uint64_t eepro100_read(void *opaque, target_phys_addr_t addr,
+ unsigned size)
{
EEPRO100State *s = opaque;
-#if 0
- logout("addr=%s val=0x%02x\n", regname(addr), val);
-#endif
- eepro100_write2(s, addr, val);
-}
-static void pci_mmio_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
-{
- EEPRO100State *s = opaque;
-#if 0
- logout("addr=%s val=0x%02x\n", regname(addr), val);
-#endif
- eepro100_write4(s, addr, val);
-}
-
-static uint32_t pci_mmio_readb(void *opaque, target_phys_addr_t addr)
-{
- EEPRO100State *s = opaque;
-#if 0
- logout("addr=%s\n", regname(addr));
-#endif
- return eepro100_read1(s, addr);
+ switch (size) {
+ case 1: return eepro100_read1(s, addr);
+ case 2: return eepro100_read2(s, addr);
+ case 4: return eepro100_read4(s, addr);
+ default: abort();
+ }
}
-static uint32_t pci_mmio_readw(void *opaque, target_phys_addr_t addr)
+static void eepro100_write(void *opaque, target_phys_addr_t addr,
+ uint64_t data, unsigned size)
{
EEPRO100State *s = opaque;
-#if 0
- logout("addr=%s\n", regname(addr));
-#endif
- return eepro100_read2(s, addr);
-}
-static uint32_t pci_mmio_readl(void *opaque, target_phys_addr_t addr)
-{
- EEPRO100State *s = opaque;
-#if 0
- logout("addr=%s\n", regname(addr));
-#endif
- return eepro100_read4(s, addr);
+ switch (size) {
+ case 1: return eepro100_write1(s, addr, data);
+ case 2: return eepro100_write2(s, addr, data);
+ case 4: return eepro100_write4(s, addr, data);
+ default: abort();
+ }
}
-static CPUWriteMemoryFunc * const pci_mmio_write[] = {
- pci_mmio_writeb,
- pci_mmio_writew,
- pci_mmio_writel
-};
-
-static CPUReadMemoryFunc * const pci_mmio_read[] = {
- pci_mmio_readb,
- pci_mmio_readw,
- pci_mmio_readl
+static MemoryRegionOps eepro100_ops = {
+ .read = eepro100_read,
+ .write = eepro100_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
};
static int nic_can_receive(VLANClientState *nc)
@@ -1953,7 +1843,9 @@ static int pci_nic_uninit(PCIDevice *pci_dev)
{
EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
- cpu_unregister_io_memory(s->mmio_index);
+ memory_region_destroy(&s->mmio_bar);
+ memory_region_destroy(&s->io_bar);
+ memory_region_destroy(&s->flash_bar);
vmstate_unregister(&pci_dev->qdev, s->vmstate, s);
eeprom93xx_free(&pci_dev->qdev, s->eeprom);
qemu_del_vlan_client(&s->nic->nc);
@@ -1985,20 +1877,20 @@ static int e100_nic_init(PCIDevice *pci_dev)
s->eeprom = eeprom93xx_new(&pci_dev->qdev, EEPROM_SIZE);
/* Handler for memory-mapped I/O */
- s->mmio_index =
- cpu_register_io_memory(pci_mmio_read, pci_mmio_write, s,
- DEVICE_LITTLE_ENDIAN);
-
- pci_register_bar_simple(&s->dev, 0, PCI_MEM_SIZE,
- PCI_BASE_ADDRESS_MEM_PREFETCH, s->mmio_index);
-
- pci_register_bar(&s->dev, 1, PCI_IO_SIZE, PCI_BASE_ADDRESS_SPACE_IO,
- pci_map);
- pci_register_bar_simple(&s->dev, 2, PCI_FLASH_SIZE, 0, s->mmio_index);
+ memory_region_init_io(&s->mmio_bar, &eepro100_ops, s, "eepro100-mmio",
+ PCI_MEM_SIZE);
+ pci_register_bar_region(&s->dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH,
+ &s->mmio_bar);
+ memory_region_init_io(&s->io_bar, &eepro100_ops, s, "eepro100-io",
+ PCI_IO_SIZE);
+ pci_register_bar_region(&s->dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar);
+ /* FIXME: flash aliases to mmio?! */
+ memory_region_init_io(&s->flash_bar, &eepro100_ops, s, "eepro100-flash",
+ PCI_FLASH_SIZE);
+ pci_register_bar_region(&s->dev, 2, 0, &s->flash_bar);
qemu_macaddr_default_if_unset(&s->conf.macaddr);
logout("macaddr: %s\n", nic_dump(&s->conf.macaddr.a[0], 6));
- assert(s->region1 == 0);
nic_reset(s);
Note: the existing code aliases the flash BAR into the MMIO bar. This is probably a bug. This patch does not correct the problem. Signed-off-by: Avi Kivity <avi@redhat.com> --- hw/eepro100.c | 182 ++++++++++++--------------------------------------------- 1 files changed, 37 insertions(+), 145 deletions(-)