| Message ID | 1304430613-25312-1-git-send-email-peter.maydell@linaro.org |
|---|---|
| State | New |
| Headers | show |
Am 03.05.2011 15:50, schrieb Peter Maydell: > Include the list of available targets in the --help output > for the --target-list= option. > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org> > --- > v2: As suggested by Stefan Weil, put the target list in --help > rather than using '--target-list=?'. This patch includes using > fold(1) in configure -- this should be OK because fold is a > standard POSIX utility (and part of GNU coreutils and busybox). > The resulting output looks like this: > > Usage: configure [options] > Options: [defaults in brackets after descriptions] > > Standard options: > --help print this message > --prefix=PREFIX install in PREFIX [/usr/local] > --interp-prefix=PREFIX where to find shared libraries, etc. > use %M for cpu name [/usr/gnemul/qemu-%M] > --target-list=LIST set target list (default: build everything) > Available targets: i386-softmmu x86_64-softmmu > arm-softmmu cris-softmmu lm32-softmmu m68k-softmmu > microblaze-softmmu microblazeel-softmmu mips-softmmu > mipsel-softmmu mips64-softmmu mips64el-softmmu > ppc-softmmu ppcemb-softmmu ppc64-softmmu sh4-softmmu > sh4eb-softmmu sparc-softmmu sparc64-softmmu > i386-linux-user x86_64-linux-user alpha-linux-user > arm-linux-user armeb-linux-user cris-linux-user > m68k-linux-user microblaze-linux-user > microblazeel-linux-user mips-linux-user > mipsel-linux-user ppc-linux-user ppc64-linux-user > ppc64abi32-linux-user sh4-linux-user > sh4eb-linux-user sparc-linux-user sparc64-linux-user > sparc32plus-linux-user unicore32-linux-user > > Advanced options (experts only): > [etc] > > > configure | 134 > ++++++++++++++++++++++++++++++++----------------------------- > 1 files changed, 70 insertions(+), 64 deletions(-) > Thanks, your patch looks good. I tested it also with MinGW32 (cross and native) - fold works there, too. Acked-by: Stefan Weil <weil@mail.berlios.de>
On Tue, May 03, 2011 at 02:50:13PM +0100, Peter Maydell wrote: > Include the list of available targets in the --help output > for the --target-list= option. > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Thanks, applied. > --- > v2: As suggested by Stefan Weil, put the target list in --help > rather than using '--target-list=?'. This patch includes using > fold(1) in configure -- this should be OK because fold is a > standard POSIX utility (and part of GNU coreutils and busybox). > The resulting output looks like this: > > Usage: configure [options] > Options: [defaults in brackets after descriptions] > > Standard options: > --help print this message > --prefix=PREFIX install in PREFIX [/usr/local] > --interp-prefix=PREFIX where to find shared libraries, etc. > use %M for cpu name [/usr/gnemul/qemu-%M] > --target-list=LIST set target list (default: build everything) > Available targets: i386-softmmu x86_64-softmmu > arm-softmmu cris-softmmu lm32-softmmu m68k-softmmu > microblaze-softmmu microblazeel-softmmu mips-softmmu > mipsel-softmmu mips64-softmmu mips64el-softmmu > ppc-softmmu ppcemb-softmmu ppc64-softmmu sh4-softmmu > sh4eb-softmmu sparc-softmmu sparc64-softmmu > i386-linux-user x86_64-linux-user alpha-linux-user > arm-linux-user armeb-linux-user cris-linux-user > m68k-linux-user microblaze-linux-user > microblazeel-linux-user mips-linux-user > mipsel-linux-user ppc-linux-user ppc64-linux-user > ppc64abi32-linux-user sh4-linux-user > sh4eb-linux-user sparc-linux-user sparc64-linux-user > sparc32plus-linux-user unicore32-linux-user > > Advanced options (experts only): > [etc] > > > configure | 134 ++++++++++++++++++++++++++++++++----------------------------- > 1 files changed, 70 insertions(+), 64 deletions(-) > > diff --git a/configure b/configure > index 6f75e2e..f46f5d4 100755 > --- a/configure > +++ b/configure > @@ -822,6 +822,72 @@ esac > > [ -z "$guest_base" ] && guest_base="$host_guest_base" > > + > +default_target_list="" > + > +# these targets are portable > +if [ "$softmmu" = "yes" ] ; then > + default_target_list="\ > +i386-softmmu \ > +x86_64-softmmu \ > +arm-softmmu \ > +cris-softmmu \ > +lm32-softmmu \ > +m68k-softmmu \ > +microblaze-softmmu \ > +microblazeel-softmmu \ > +mips-softmmu \ > +mipsel-softmmu \ > +mips64-softmmu \ > +mips64el-softmmu \ > +ppc-softmmu \ > +ppcemb-softmmu \ > +ppc64-softmmu \ > +sh4-softmmu \ > +sh4eb-softmmu \ > +sparc-softmmu \ > +sparc64-softmmu \ > +" > +fi > +# the following are Linux specific > +if [ "$linux_user" = "yes" ] ; then > + default_target_list="${default_target_list}\ > +i386-linux-user \ > +x86_64-linux-user \ > +alpha-linux-user \ > +arm-linux-user \ > +armeb-linux-user \ > +cris-linux-user \ > +m68k-linux-user \ > +microblaze-linux-user \ > +microblazeel-linux-user \ > +mips-linux-user \ > +mipsel-linux-user \ > +ppc-linux-user \ > +ppc64-linux-user \ > +ppc64abi32-linux-user \ > +sh4-linux-user \ > +sh4eb-linux-user \ > +sparc-linux-user \ > +sparc64-linux-user \ > +sparc32plus-linux-user \ > +unicore32-linux-user \ > +" > +fi > +# the following are Darwin specific > +if [ "$darwin_user" = "yes" ] ; then > + default_target_list="$default_target_list i386-darwin-user ppc-darwin-user " > +fi > +# the following are BSD specific > +if [ "$bsd_user" = "yes" ] ; then > + default_target_list="${default_target_list}\ > +i386-bsd-user \ > +x86_64-bsd-user \ > +sparc-bsd-user \ > +sparc64-bsd-user \ > +" > +fi > + > if test x"$show_help" = x"yes" ; then > cat << EOF > > @@ -834,7 +900,9 @@ echo " --help print this message" > echo " --prefix=PREFIX install in PREFIX [$prefix]" > echo " --interp-prefix=PREFIX where to find shared libraries, etc." > echo " use %M for cpu name [$interp_prefix]" > -echo " --target-list=LIST set target list [$target_list]" > +echo " --target-list=LIST set target list (default: build everything)" > +echo "Available targets: $default_target_list" | \ > + fold -s -w 53 | sed -e 's/^/ /' > echo "" > echo "Advanced options (experts only):" > echo " --source-path=PATH path of source code [$source_path]" > @@ -1004,70 +1072,8 @@ if test "$solaris" = "yes" ; then > fi > fi > > - > if test -z "$target_list" ; then > -# these targets are portable > - if [ "$softmmu" = "yes" ] ; then > - target_list="\ > -i386-softmmu \ > -x86_64-softmmu \ > -arm-softmmu \ > -cris-softmmu \ > -lm32-softmmu \ > -m68k-softmmu \ > -microblaze-softmmu \ > -microblazeel-softmmu \ > -mips-softmmu \ > -mipsel-softmmu \ > -mips64-softmmu \ > -mips64el-softmmu \ > -ppc-softmmu \ > -ppcemb-softmmu \ > -ppc64-softmmu \ > -sh4-softmmu \ > -sh4eb-softmmu \ > -sparc-softmmu \ > -sparc64-softmmu \ > -" > - fi > -# the following are Linux specific > - if [ "$linux_user" = "yes" ] ; then > - target_list="${target_list}\ > -i386-linux-user \ > -x86_64-linux-user \ > -alpha-linux-user \ > -arm-linux-user \ > -armeb-linux-user \ > -cris-linux-user \ > -m68k-linux-user \ > -microblaze-linux-user \ > -microblazeel-linux-user \ > -mips-linux-user \ > -mipsel-linux-user \ > -ppc-linux-user \ > -ppc64-linux-user \ > -ppc64abi32-linux-user \ > -sh4-linux-user \ > -sh4eb-linux-user \ > -sparc-linux-user \ > -sparc64-linux-user \ > -sparc32plus-linux-user \ > -unicore32-linux-user \ > -" > - fi > -# the following are Darwin specific > - if [ "$darwin_user" = "yes" ] ; then > - target_list="$target_list i386-darwin-user ppc-darwin-user " > - fi > -# the following are BSD specific > - if [ "$bsd_user" = "yes" ] ; then > - target_list="${target_list}\ > -i386-bsd-user \ > -x86_64-bsd-user \ > -sparc-bsd-user \ > -sparc64-bsd-user \ > -" > - fi > + target_list="$default_target_list" > else > target_list=`echo "$target_list" | sed -e 's/,/ /g'` > fi > -- > 1.7.1 > > >
diff --git a/configure b/configure index 6f75e2e..f46f5d4 100755 --- a/configure +++ b/configure @@ -822,6 +822,72 @@ esac [ -z "$guest_base" ] && guest_base="$host_guest_base" + +default_target_list="" + +# these targets are portable +if [ "$softmmu" = "yes" ] ; then + default_target_list="\ +i386-softmmu \ +x86_64-softmmu \ +arm-softmmu \ +cris-softmmu \ +lm32-softmmu \ +m68k-softmmu \ +microblaze-softmmu \ +microblazeel-softmmu \ +mips-softmmu \ +mipsel-softmmu \ +mips64-softmmu \ +mips64el-softmmu \ +ppc-softmmu \ +ppcemb-softmmu \ +ppc64-softmmu \ +sh4-softmmu \ +sh4eb-softmmu \ +sparc-softmmu \ +sparc64-softmmu \ +" +fi +# the following are Linux specific +if [ "$linux_user" = "yes" ] ; then + default_target_list="${default_target_list}\ +i386-linux-user \ +x86_64-linux-user \ +alpha-linux-user \ +arm-linux-user \ +armeb-linux-user \ +cris-linux-user \ +m68k-linux-user \ +microblaze-linux-user \ +microblazeel-linux-user \ +mips-linux-user \ +mipsel-linux-user \ +ppc-linux-user \ +ppc64-linux-user \ +ppc64abi32-linux-user \ +sh4-linux-user \ +sh4eb-linux-user \ +sparc-linux-user \ +sparc64-linux-user \ +sparc32plus-linux-user \ +unicore32-linux-user \ +" +fi +# the following are Darwin specific +if [ "$darwin_user" = "yes" ] ; then + default_target_list="$default_target_list i386-darwin-user ppc-darwin-user " +fi +# the following are BSD specific +if [ "$bsd_user" = "yes" ] ; then + default_target_list="${default_target_list}\ +i386-bsd-user \ +x86_64-bsd-user \ +sparc-bsd-user \ +sparc64-bsd-user \ +" +fi + if test x"$show_help" = x"yes" ; then cat << EOF @@ -834,7 +900,9 @@ echo " --help print this message" echo " --prefix=PREFIX install in PREFIX [$prefix]" echo " --interp-prefix=PREFIX where to find shared libraries, etc." echo " use %M for cpu name [$interp_prefix]" -echo " --target-list=LIST set target list [$target_list]" +echo " --target-list=LIST set target list (default: build everything)" +echo "Available targets: $default_target_list" | \ + fold -s -w 53 | sed -e 's/^/ /' echo "" echo "Advanced options (experts only):" echo " --source-path=PATH path of source code [$source_path]" @@ -1004,70 +1072,8 @@ if test "$solaris" = "yes" ; then fi fi - if test -z "$target_list" ; then -# these targets are portable - if [ "$softmmu" = "yes" ] ; then - target_list="\ -i386-softmmu \ -x86_64-softmmu \ -arm-softmmu \ -cris-softmmu \ -lm32-softmmu \ -m68k-softmmu \ -microblaze-softmmu \ -microblazeel-softmmu \ -mips-softmmu \ -mipsel-softmmu \ -mips64-softmmu \ -mips64el-softmmu \ -ppc-softmmu \ -ppcemb-softmmu \ -ppc64-softmmu \ -sh4-softmmu \ -sh4eb-softmmu \ -sparc-softmmu \ -sparc64-softmmu \ -" - fi -# the following are Linux specific - if [ "$linux_user" = "yes" ] ; then - target_list="${target_list}\ -i386-linux-user \ -x86_64-linux-user \ -alpha-linux-user \ -arm-linux-user \ -armeb-linux-user \ -cris-linux-user \ -m68k-linux-user \ -microblaze-linux-user \ -microblazeel-linux-user \ -mips-linux-user \ -mipsel-linux-user \ -ppc-linux-user \ -ppc64-linux-user \ -ppc64abi32-linux-user \ -sh4-linux-user \ -sh4eb-linux-user \ -sparc-linux-user \ -sparc64-linux-user \ -sparc32plus-linux-user \ -unicore32-linux-user \ -" - fi -# the following are Darwin specific - if [ "$darwin_user" = "yes" ] ; then - target_list="$target_list i386-darwin-user ppc-darwin-user " - fi -# the following are BSD specific - if [ "$bsd_user" = "yes" ] ; then - target_list="${target_list}\ -i386-bsd-user \ -x86_64-bsd-user \ -sparc-bsd-user \ -sparc64-bsd-user \ -" - fi + target_list="$default_target_list" else target_list=`echo "$target_list" | sed -e 's/,/ /g'` fi
Include the list of available targets in the --help output for the --target-list= option. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- v2: As suggested by Stefan Weil, put the target list in --help rather than using '--target-list=?'. This patch includes using fold(1) in configure -- this should be OK because fold is a standard POSIX utility (and part of GNU coreutils and busybox). The resulting output looks like this: Usage: configure [options] Options: [defaults in brackets after descriptions] Standard options: --help print this message --prefix=PREFIX install in PREFIX [/usr/local] --interp-prefix=PREFIX where to find shared libraries, etc. use %M for cpu name [/usr/gnemul/qemu-%M] --target-list=LIST set target list (default: build everything) Available targets: i386-softmmu x86_64-softmmu arm-softmmu cris-softmmu lm32-softmmu m68k-softmmu microblaze-softmmu microblazeel-softmmu mips-softmmu mipsel-softmmu mips64-softmmu mips64el-softmmu ppc-softmmu ppcemb-softmmu ppc64-softmmu sh4-softmmu sh4eb-softmmu sparc-softmmu sparc64-softmmu i386-linux-user x86_64-linux-user alpha-linux-user arm-linux-user armeb-linux-user cris-linux-user m68k-linux-user microblaze-linux-user microblazeel-linux-user mips-linux-user mipsel-linux-user ppc-linux-user ppc64-linux-user ppc64abi32-linux-user sh4-linux-user sh4eb-linux-user sparc-linux-user sparc64-linux-user sparc32plus-linux-user unicore32-linux-user Advanced options (experts only): [etc] configure | 134 ++++++++++++++++++++++++++++++++----------------------------- 1 files changed, 70 insertions(+), 64 deletions(-)