@@ -67,6 +67,8 @@ static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret);
static int ide_handle_rw_error(IDEState *s, int error, int op);
static void ide_flush_cache(IDEState *s);
+static void pata_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb);
+
static void padstr(char *str, const char *src, int len)
{
int i, v;
@@ -325,6 +327,12 @@ static inline void ide_dma_submit_check(IDEState *s,
static void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
EndTransferFunc *end_transfer_func)
{
+ s->bus->ops->transfer_start(s,buf,size,end_transfer_func);
+}
+
+static void pata_transfer_start(IDEState *s, uint8_t *buf, int size,
+ EndTransferFunc *end_transfer_func)
+{
s->end_transfer_func = end_transfer_func;
s->data_ptr = buf;
s->data_end = buf + size;
@@ -2581,6 +2589,18 @@ static void ide_dummy_transfer_stop(IDEState *s)
s->io_buffer[3] = 0xff;
}
+static void pata_set_irq(IDEBus *bus)
+{
+ BMDMAState *bm = bus->bmdma;
+
+ if (!(bus->cmd & IDE_CMD_DISABLE_IRQ)) {
+ if (bm) {
+ bm->status |= BM_STATUS_INT;
+ }
+ qemu_irq_raise(bus->irq);
+ }
+}
+
static void ide_reset(IDEState *s)
{
#ifdef DEBUG_IDE
@@ -2717,6 +2737,12 @@ static void ide_init1(IDEBus *bus, int unit)
ide_sector_write_timer_cb, s);
}
+static IDEBusOps pata_bus_ops = {
+ .transfer_start = pata_transfer_start,
+ .set_irq = pata_set_irq,
+ .dma_start = pata_dma_start,
+};
+
void ide_init2(IDEBus *bus, qemu_irq irq)
{
int i;
@@ -2726,6 +2752,7 @@ void ide_init2(IDEBus *bus, qemu_irq irq)
ide_reset(&bus->ifs[i]);
}
bus->irq = irq;
+ bus->ops = &pata_bus_ops;
}
/* TODO convert users to qdev and remove */
@@ -2749,6 +2776,7 @@ void ide_init2_with_non_qdev_drives(IDEBus *bus, DriveInfo *hd0,
}
}
bus->irq = irq;
+ bus->ops = &pata_bus_ops;
}
void ide_init_ioport(IDEBus *bus, int iobase, int iobase2)
@@ -2920,9 +2948,10 @@ const VMStateDescription vmstate_ide_bus = {
/***********************************************************/
/* PCI IDE definitions */
-static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb)
+static void pata_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb)
{
BMDMAState *bm = s->bus->bmdma;
+
if(!bm)
return;
bm->unit = s->unit;
@@ -2937,6 +2966,11 @@ static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb)
}
}
+static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb)
+{
+ s->bus->ops->dma_start(s,dma_cb);
+}
+
static void ide_dma_restart(IDEState *s, int is_read)
{
BMDMAState *bm = s->bus->bmdma;
@@ -21,6 +21,7 @@ typedef struct IDEDevice IDEDevice;
typedef struct IDEDeviceInfo IDEDeviceInfo;
typedef struct IDEState IDEState;
typedef struct BMDMAState BMDMAState;
+typedef struct IDEBusOps IDEBusOps;
/* Bits of HD_STATUS */
#define ERR_STAT 0x01
@@ -367,6 +368,14 @@ typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;
typedef void EndTransferFunc(IDEState *);
+
+typedef void TransferStartFunc(IDEState *,
+ uint8_t *,
+ int,
+ EndTransferFunc *);
+typedef void IRQSetFunc(IDEBus *);
+typedef void DMAStartFunc(IDEState *, BlockDriverCompletionFunc *);
+
/* NOTE: IDEState represents in fact one drive */
struct IDEState {
IDEBus *bus;
@@ -443,12 +452,21 @@ struct IDEState {
uint8_t *smart_selftest_data;
};
+/* This struct represents a device that uses an IDE bus, but requires
+ * modifications to how it works. An example is AHCI. */
+struct IDEBusOps {
+ TransferStartFunc *transfer_start;
+ IRQSetFunc *set_irq;
+ DMAStartFunc *dma_start;
+};
+
struct IDEBus {
BusState qbus;
IDEDevice *master;
IDEDevice *slave;
BMDMAState *bmdma;
IDEState ifs[2];
+ IDEBusOps *ops;
uint8_t unit;
uint8_t cmd;
qemu_irq irq;
@@ -514,13 +532,7 @@ static inline IDEState *bmdma_active_if(BMDMAState *bmdma)
static inline void ide_set_irq(IDEBus *bus)
{
- BMDMAState *bm = bus->bmdma;
- if (!(bus->cmd & IDE_CMD_DISABLE_IRQ)) {
- if (bm) {
- bm->status |= BM_STATUS_INT;
- }
- qemu_irq_raise(bus->irq);
- }
+ bus->ops->set_irq(bus);
}
/* hw/ide/core.c */