@@ -221,7 +221,7 @@ obj-mips-y += vga.o i8259.o
obj-mips-y += g364fb.o jazz_led.o
obj-mips-y += gt64xxx.o mc146818rtc.o
obj-mips-y += piix4.o cirrus_vga.o
-obj-mips-$(CONFIG_FULONG) += bonito.o
+obj-mips-$(CONFIG_FULONG) += bonito.o vt82c686.o
obj-microblaze-y = petalogix_s3adsp1800_mmu.o
@@ -78,6 +78,14 @@
#define PCI_VENDOR_ID_XILINX 0x10ee
+#define PCI_VENDOR_ID_VIA 0x1106
+#define PCI_DEVICE_ID_VIA_ISA_BRIDGE 0x0686
+#define PCI_DEVICE_ID_VIA_IDE 0x0571
+#define PCI_DEVICE_ID_VIA_UHCI 0x3038
+#define PCI_DEVICE_ID_VIA_ACPI 0x3057
+#define PCI_DEVICE_ID_VIA_AC97 0x3058
+#define PCI_DEVICE_ID_VIA_MC97 0x3068
+
#define PCI_VENDOR_ID_MARVELL 0x11ab
#define PCI_VENDOR_ID_ENSONIQ 0x1274
new file mode 100644
@@ -0,0 +1,569 @@
+/*
+ * VT82C686B south bridge support
+ *
+ * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
+ * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
+ * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
+ * This code is licensed under the GNU GPL v2.
+ */
+
+#include "hw.h"
+#include "pc.h"
+#include "vt82c686.h"
+#include "i2c.h"
+#include "smbus.h"
+#include "pci.h"
+#include "isa.h"
+#include "sysbus.h"
+#include "mips.h"
+#include "apm.h"
+#include "acpi.h"
+#include "pm_smbus.h"
+#include "sysemu.h"
+#include "qemu-timer.h"
+
+typedef uint32_t pci_addr_t;
+#include "pci_host.h"
+//#define DEBUG_VT82C686B
+
+#ifdef DEBUG_VT82C686B
+#define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)
+#else
+#define DPRINTF(fmt, ...)
+#endif
+
+typedef struct SuperIOConfig
+{
+ uint8_t config[0xff];
+ uint8_t index;
+ uint8_t data;
+} SuperIOConfig;
+
+typedef struct VT82C686BState {
+ PCIDevice dev;
+ SuperIOConfig *superio_conf;
+} VT82C686BState;
+
+static void superio_ioport_writeb(void *opaque, uint32_t addr, uint32_t data)
+{
+ int can_write;
+ SuperIOConfig *superio_conf = (SuperIOConfig *)opaque;
+
+ DPRINTF("superio_ioport_writeb address 0x%x val 0x%x \n", addr, data);
+ if (addr == 0x3f0) {
+ superio_conf->index = data & 0xff;
+ } else {
+ /* 0x3f1 */
+ switch (superio_conf->index) {
+ case 0x00 ... 0xdf:
+ case 0xe4:
+ case 0xe5:
+ case 0xe9 ... 0xed:
+ case 0xf3:
+ case 0xf5:
+ case 0xf7:
+ case 0xf9 ... 0xfb:
+ case 0xfd ... 0xff:
+ can_write = 0;
+ break;
+ default:
+ can_write = 1;
+
+ if (can_write) {
+ switch (superio_conf->index) {
+ case 0xe7:
+ if ((data & 0xff) != 0xfe) {
+ DPRINTF("chage uart 1 base. unsupported yet \n");
+ }
+ break;
+ case 0xe8:
+ if ((data & 0xff) != 0xbe) {
+ DPRINTF("chage uart 2 base. unsupported yet \n");
+ }
+ break;
+
+ default:
+ superio_conf->config[superio_conf->index] = data & 0xff;
+ }
+ }
+ }
+ superio_conf->config[superio_conf->index] = data & 0xff;
+ }
+}
+
+static uint32_t superio_ioport_readb(void *opaque, uint32_t addr)
+{
+ SuperIOConfig *superio_conf = (SuperIOConfig *)opaque;
+
+ DPRINTF("superio_ioport_readb address 0x%x \n", addr);
+ return (superio_conf->config[superio_conf->index]);
+}
+
+static void vt82c686b_reset(void * opaque)
+{
+ PCIDevice *d = opaque;
+ uint8_t *pci_conf = d->config;
+ VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
+
+ pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
+ pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
+ pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
+
+ pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
+ pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
+ pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
+ pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
+ pci_conf[0x59] = 0x04;
+ pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
+ pci_conf[0x5f] = 0x04;
+ pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
+
+ vt82c->superio_conf->config[0xe0] = 0x3c;
+ vt82c->superio_conf->config[0xe2] = 0x03;
+ vt82c->superio_conf->config[0xe3] = 0xfc;
+ vt82c->superio_conf->config[0xe6] = 0xde;
+ vt82c->superio_conf->config[0xe7] = 0xfe;
+ vt82c->superio_conf->config[0xe8] = 0xbe;
+}
+
+/* write config pci function0 registers. PCI-ISA bridge */
+static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
+ uint32_t val, int len)
+{
+ VT82C686BState *vt686 = DO_UPCAST(VT82C686BState, dev, d);
+
+ DPRINTF("vt82c686b_write_config address 0x%x val 0x%x len 0x%x \n",
+ address, val, len);
+
+ pci_default_write_config(d, address, val, len);
+ if (address == 0x85) { /* enable or disable super IO configure */
+ if (val & 0x2) {
+ /* floppy also uses 0x3f0 and 0x3f1.
+ * But we do not emulate flopy,so just set it here. */
+ isa_unassign_ioport(0x3f0, 2);
+ register_ioport_read(0x3f0, 2, 1, superio_ioport_readb,
+ vt686->superio_conf);
+ register_ioport_write(0x3f0, 2, 1, superio_ioport_writeb,
+ vt686->superio_conf);
+ } else {
+ isa_unassign_ioport(0x3f0, 2);
+ }
+ }
+}
+
+static void vt82c686b_save(QEMUFile * f, void *opaque)
+{
+ PCIDevice *d = opaque;
+ pci_device_save(d, f);
+}
+
+static int vt82c686b_load(QEMUFile * f, void *opaque, int version_id)
+{
+ PCIDevice *d = opaque;
+ if (version_id != 1)
+ return -EINVAL;
+ return pci_device_load(d, f);
+}
+
+#define ACPI_DBG_IO_ADDR 0xb044
+
+typedef struct VT686PMState {
+ PCIDevice dev;
+ uint16_t pmsts;
+ uint16_t pmen;
+ uint16_t pmcntrl;
+ APMState apm;
+ QEMUTimer *tmr_timer;
+ int64_t tmr_overflow_time;
+ PMSMBus smb;
+ uint32_t smb_io_base;
+} VT686PMState;
+
+typedef struct VT686AC97State {
+ PCIDevice dev;
+ int unused;
+} VT686AC97State;
+
+typedef struct VT686MC97State {
+ PCIDevice dev;
+ int unused;
+} VT686MC97State;
+
+#define RTC_EN (1 << 10)
+#define PWRBTN_EN (1 << 8)
+#define GBL_EN (1 << 5)
+#define TMROF_EN (1 << 0)
+#define SCI_EN (1 << 0)
+#define SUS_EN (1 << 13)
+
+#define ACPI_ENABLE 0xf1
+#define ACPI_DISABLE 0xf0
+
+static uint32_t get_pmtmr(VT686PMState *s)
+{
+ uint32_t d;
+ d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
+ return d & 0xffffff;
+}
+
+static int get_pmsts(VT686PMState *s)
+{
+ int64_t d;
+ int pmsts;
+ pmsts = s->pmsts;
+ d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
+ if (d >= s->tmr_overflow_time)
+ s->pmsts |= TMROF_EN;
+ return pmsts;
+}
+
+static void pm_update_sci(VT686PMState *s)
+{
+ int sci_level, pmsts;
+ int64_t expire_time;
+
+ pmsts = get_pmsts(s);
+ sci_level = (((pmsts & s->pmen) &
+ (RTC_EN | PWRBTN_EN | GBL_EN | TMROF_EN)) != 0);
+ qemu_set_irq(s->dev.irq[0], sci_level);
+ /* schedule a timer interruption if needed */
+ if ((s->pmen & TMROF_EN) && !(pmsts & TMROF_EN)) {
+ expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(), PM_TIMER_FREQUENCY);
+ qemu_mod_timer(s->tmr_timer, expire_time);
+ } else {
+ qemu_del_timer(s->tmr_timer);
+ }
+}
+
+static void pm_tmr_timer(void *opaque)
+{
+ VT686PMState *s = opaque;
+ pm_update_sci(s);
+}
+
+static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
+{
+ VT686PMState *s = opaque;
+
+ addr &= 0x0f;
+ switch (addr) {
+ case 0x00:
+ {
+ int64_t d;
+ int pmsts;
+ pmsts = get_pmsts(s);
+ if (pmsts & val & TMROF_EN) {
+ /* if TMRSTS is reset, then compute the new overflow time */
+ d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
+ s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
+ }
+ s->pmsts &= ~val;
+ pm_update_sci(s);
+ }
+ break;
+ case 0x02:
+ s->pmen = val;
+ pm_update_sci(s);
+ break;
+ case 0x04:
+ {
+ int sus_typ;
+ s->pmcntrl = val & ~(SUS_EN);
+ if (val & SUS_EN) {
+ /* change suspend type */
+ sus_typ = (val >> 10) & 3;
+ switch (sus_typ) {
+ case 0: /* soft power off */
+ qemu_system_shutdown_request();
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ DPRINTF("PM writew port=0x%04x val=0x%02x\n", addr, val);
+}
+
+static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
+{
+ VT686PMState *s = opaque;
+ uint32_t val;
+
+ addr &= 0x0f;
+ switch (addr) {
+ case 0x00:
+ val = get_pmsts(s);
+ break;
+ case 0x02:
+ val = s->pmen;
+ break;
+ case 0x04:
+ val = s->pmcntrl;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+ DPRINTF("PM readw port=0x%04x val=0x%02x\n", addr, val);
+ return val;
+}
+
+static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
+{
+ addr &= 0x0f;
+ DPRINTF("PM writel port=0x%04x val=0x%08x\n", addr, val);
+}
+
+static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
+{
+ VT686PMState *s = opaque;
+ uint32_t val;
+
+ addr &= 0x0f;
+ switch (addr) {
+ case 0x08:
+ val = get_pmtmr(s);
+ break;
+ default:
+ val = 0;
+ break;
+ }
+ DPRINTF("PM readl port=0x%04x val=0x%08x\n", addr, val);
+ return val;
+}
+
+static void pm_io_space_update(VT686PMState *s)
+{
+ uint32_t pm_io_base;
+
+ if (s->dev.config[0x80] & 1) {
+ pm_io_base = pci_get_long(s->dev.config + 0x40);
+ pm_io_base &= 0xffc0;
+
+ /* XXX: need to improve memory and ioport allocation */
+ DPRINTF("PM: mapping to 0x%x\n", pm_io_base);
+ register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s);
+ register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s);
+ register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s);
+ register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s);
+ }
+}
+
+static void pm_write_config(PCIDevice *d,
+ uint32_t address, uint32_t val, int len)
+{
+ DPRINTF("pm_write_config address 0x%x val 0x%x len 0x%x \n",
+ address, val, len);
+ pci_default_write_config(d, address, val, len);
+}
+
+static int vmstate_acpi_post_load(void *opaque, int version_id)
+{
+ VT686PMState *s = opaque;
+
+ pm_io_space_update(s);
+ return 0;
+}
+
+static const VMStateDescription vmstate_acpi = {
+ .name = "vt82c686b_pm",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .post_load = vmstate_acpi_post_load,
+ .fields = (VMStateField []) {
+ VMSTATE_PCI_DEVICE(dev, VT686PMState),
+ VMSTATE_UINT16(pmsts, VT686PMState),
+ VMSTATE_UINT16(pmen, VT686PMState),
+ VMSTATE_UINT16(pmcntrl, VT686PMState),
+ VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
+ VMSTATE_TIMER(tmr_timer, VT686PMState),
+ VMSTATE_INT64(tmr_overflow_time, VT686PMState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+/*
+ * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
+ * just register a PCI device now, functionalities will be implemented later.
+ */
+
+void vt82c686b_ac97_init(PCIBus *bus, int devfn)
+{
+ VT686AC97State *s;
+ uint8_t *pci_conf;
+
+ s = (VT686AC97State *)pci_register_device(bus,
+ "vt82c686b_AC97", sizeof(VT686AC97State),
+ devfn, NULL, NULL);
+ pci_conf = s->dev.config;
+ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_AC97);
+ pci_config_set_class(pci_conf, PCI_CLASS_MULTIMEDIA_AUDIO);
+ pci_config_set_revision(pci_conf, 0x50);
+
+ pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
+ PCI_COMMAND_PARITY);
+ pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
+ PCI_STATUS_DEVSEL_MEDIUM);
+ pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
+}
+
+void vt82c686b_mc97_init(PCIBus *bus, int devfn)
+{
+ VT686MC97State *s;
+ uint8_t *pci_conf;
+
+ s = (VT686MC97State *)pci_register_device(bus,
+ "vt82c686b_MC97", sizeof(VT686MC97State),
+ devfn, NULL, NULL);
+ pci_conf = s->dev.config;
+ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_MC97);
+ pci_config_set_class(pci_conf, PCI_CLASS_COMMUNICATION_OTHER);
+ pci_config_set_revision(pci_conf, 0x30);
+
+ pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
+ PCI_COMMAND_VGA_PALETTE);
+ pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
+ pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
+}
+
+/* vt82c686 pm init */
+static int vt82c686b_pm_initfn(PCIDevice *dev)
+{
+ VT686PMState *s = DO_UPCAST(VT686PMState, dev, dev);;
+ uint8_t *pci_conf;
+
+ pci_conf = s->dev.config;
+ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_ACPI);
+ pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER);
+ pci_config_set_revision(pci_conf, 0x40);
+ pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
+
+ pci_set_word(pci_conf + PCI_COMMAND, 0);
+ pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
+ PCI_STATUS_DEVSEL_MEDIUM);
+
+ /* 0x48-0x4B is Power Management I/O Base */
+ pci_set_long(pci_conf + 0x48, 0x00000001);
+
+ /* SMB ports:0xeee0~0xeeef */
+ s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0);
+ pci_conf[0x90] = s->smb_io_base | 1;
+ pci_conf[0x91] = s->smb_io_base >> 8;
+ pci_conf[0xd2] = 0x90;
+ register_ioport_write(s->smb_io_base, 0xf, 1, smb_ioport_writeb, &s->smb);
+ register_ioport_read(s->smb_io_base, 0xf, 1, smb_ioport_readb, &s->smb);
+
+ apm_init(&s->apm, NULL, s);
+
+ s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
+
+ pm_smbus_init(&s->dev.qdev, &s->smb);
+
+ return 0;
+}
+
+i2c_bus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
+ qemu_irq sci_irq)
+{
+ PCIDevice *dev;
+ VT686PMState *s;
+
+ dev = pci_create(bus, devfn, "VT82C686B_PM");
+ qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
+
+ s = DO_UPCAST(VT686PMState, dev, dev);
+
+ qdev_init_nofail(&dev->qdev);
+
+ return s->smb.smbus;
+}
+
+static PCIDeviceInfo via_pm_info = {
+ .qdev.name = "VT82C686B_PM",
+ .qdev.desc = "PM",
+ .qdev.size = sizeof(VT686PMState),
+ .qdev.vmsd = &vmstate_acpi,
+ .init = vt82c686b_pm_initfn,
+ .config_write = pm_write_config,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+};
+
+static void vt82c686b_pm_register(void)
+{
+ pci_qdev_register(&via_pm_info);
+}
+
+device_init(vt82c686b_pm_register);
+
+
+/* init the PCI-to-ISA bridge */
+static int vt82c686b_initfn(PCIDevice *d)
+{
+ uint8_t *pci_conf;
+ uint8_t *wmask;
+ int i;
+
+ isa_bus_new(&d->qdev);
+ register_savevm("vt82c686b", 0, 1, vt82c686b_save, vt82c686b_load, d);
+
+ pci_conf = d->config;
+ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_ISA_BRIDGE);
+ pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_ISA);
+ pci_config_set_prog_interface(pci_conf, 0x0);
+ pci_config_set_revision(pci_conf,0x40); /* Revision 4.0 */
+ pci_conf[PCI_HEADER_TYPE] =
+ PCI_HEADER_TYPE_NORMAL | PCI_HEADER_TYPE_MULTI_FUNCTION;
+
+ wmask = d->wmask;
+ for (i = 0x00; i < 0xff; i++) {
+ if (i<=0x03 || (i>=0x08 && i<=0x3f)) {
+ wmask[i] = 0x00;
+ }
+ }
+
+ qemu_register_reset(vt82c686b_reset, d);
+
+ return 0;
+}
+
+int vt82c686b_init(PCIBus *bus, int devfn)
+{
+ PCIDevice *d;
+ VT82C686BState *vt686;
+
+ d = pci_create_simple(bus, devfn, "VT82C686B");
+ vt686 = DO_UPCAST(VT82C686BState, dev, d);
+
+ /* set super io config */
+ vt686->superio_conf = qemu_mallocz(sizeof(SuperIOConfig));
+
+ return d->devfn;
+}
+
+static PCIDeviceInfo via_info = {
+ .qdev.name = "VT82C686B",
+ .qdev.desc = "ISA bridge",
+ .qdev.size = sizeof(VT82C686BState),
+ .qdev.no_user = 1,
+ .init = vt82c686b_initfn,
+ .config_write = vt82c686b_write_config,
+};
+
+static void vt82c686b_register(void)
+{
+ pci_qdev_register(&via_info);
+}
+device_init(vt82c686b_register);
new file mode 100644
@@ -0,0 +1,11 @@
+#ifndef HW_VT82C686_H
+#define HW_VT82C686_H
+
+/* vt82c686.c */
+int vt82c686b_init(PCIBus * bus, int devfn);
+void vt82c686b_ac97_init(PCIBus *bus, int devfn);
+void vt82c686b_mc97_init(PCIBus *bus, int devfn);
+i2c_bus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
+ qemu_irq sci_irq);
+
+#endif
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> --- Makefile.target | 2 +- hw/pci_ids.h | 8 + hw/vt82c686.c | 569 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ hw/vt82c686.h | 11 + 4 files changed, 589 insertions(+), 1 deletions(-) create mode 100644 hw/vt82c686.c create mode 100644 hw/vt82c686.h