@@ -220,7 +220,7 @@ obj-mips-y += dma.o vga.o i8259.o
obj-mips-y += g364fb.o jazz_led.o
obj-mips-y += gt64xxx.o pckbd.o mc146818rtc.o
obj-mips-y += piix4.o cirrus_vga.o
-obj-mips-$(CONFIG_FULONG) += bonito.o
+obj-mips-$(CONFIG_FULONG) += bonito.o vt82c686.o
obj-microblaze-y = petalogix_s3adsp1800_mmu.o
@@ -115,6 +115,13 @@ void i440fx_init_memory_mappings(PCII440FXState *d);
extern PCIDevice *piix4_dev;
int piix4_init(PCIBus *bus, int devfn);
+/* vt82c686.c */
+int vt82c686b_init(PCIBus * bus, int devfn);
+void vt82c686b_ac97_init(PCIBus *bus, int devfn);
+void vt82c686b_mc97_init(PCIBus *bus, int devfn);
+i2c_bus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
+ qemu_irq sci_irq);
+
/* vga.c */
enum vga_retrace_method {
VGA_RETRACE_DUMB,
@@ -78,6 +78,14 @@
#define PCI_VENDOR_ID_XILINX 0x10ee
+#define PCI_VENDOR_ID_VIA 0x1106
+#define PCI_DEVICE_ID_VIA_ISA_BRIDGE 0x0686
+#define PCI_DEVICE_ID_VIA_IDE 0x0571
+#define PCI_DEVICE_ID_VIA_UHCI 0x3038
+#define PCI_DEVICE_ID_VIA_ACPI 0x3057
+#define PCI_DEVICE_ID_VIA_AC97 0x3058
+#define PCI_DEVICE_ID_VIA_MC97 0x3068
+
#define PCI_VENDOR_ID_MARVELL 0x11ab
#define PCI_VENDOR_ID_ENSONIQ 0x1274
new file mode 100644
@@ -0,0 +1,786 @@
+/*
+ * VT82C686B south bridge support
+ *
+ * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
+ * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
+ * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
+ * This code is licensed under the GNU GPL v2.
+ */
+
+#include "hw.h"
+#include "pc.h"
+#include "i2c.h"
+#include "smbus.h"
+#include "pci.h"
+#include "isa.h"
+#include "sysbus.h"
+#include "mips.h"
+
+typedef uint32_t pci_addr_t;
+#include "pci_host.h"
+//#define DEBUG_VT82C686B
+
+#ifdef DEBUG_VT82C686B
+#define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)
+#else
+#define DPRINTF(fmt, ...)
+#endif
+
+typedef struct SuperIOConfig
+{
+ uint8_t config[0xff];
+ uint8_t index;
+ uint8_t data;
+} SuperIOConfig;
+
+typedef struct VT82C686BState {
+ PCIDevice dev;
+ SuperIOConfig *superio_conf;
+} VT82C686BState;
+
+uint32_t smb_data[16];
+static void superio_ioport_writeb(void *opaque, uint32_t addr, uint32_t data)
+{
+ int can_write;
+ SuperIOConfig *superio_conf = (SuperIOConfig *)opaque;
+
+ DPRINTF("superio_ioport_writeb address 0x%x val 0x%x \n", addr, data);
+ if (addr == 0x3f0) {
+ superio_conf->index = data & 0xff;
+ } else {
+ /* 0x3f1 */
+ switch (superio_conf->index) {
+ case 0x00 ... 0xdf:
+ case 0xe4:
+ case 0xe5:
+ case 0xe9 ... 0xed:
+ case 0xf3:
+ case 0xf5:
+ case 0xf7:
+ case 0xf9 ... 0xfb:
+ case 0xfd ... 0xff:
+ can_write = 0;
+ break;
+ default:
+ can_write = 1;
+
+ if (can_write) {
+ switch (superio_conf->index) {
+ case 0xe7:
+ if ((data & 0xff) != 0xfe) {
+ DPRINTF("chage uart 1 base. unsupported yet \n");
+ }
+ break;
+ case 0xe8:
+ if ((data & 0xff) != 0xbe) {
+ DPRINTF("chage uart 2 base. unsupported yet \n");
+ }
+ break;
+
+ default:
+ superio_conf->config[superio_conf->index] = data & 0xff;
+ }
+ }
+ }
+ superio_conf->config[superio_conf->index] = data & 0xff;
+ }
+}
+
+static uint32_t superio_ioport_readb(void *opaque, uint32_t addr)
+{
+ SuperIOConfig *superio_conf = (SuperIOConfig *)opaque;
+
+ DPRINTF("superio_ioport_readb address 0x%x \n", addr);
+ return (superio_conf->config[superio_conf->index]);
+}
+
+static void vt82c686b_reset(void * opaque)
+{
+ PCIDevice *d = opaque;
+ uint8_t *pci_conf = d->config;
+ VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
+
+ pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
+
+ pci_conf[0x04] = 0x87; /* master, memory, I/O and special */
+ pci_conf[0x05] = 0x00;
+ pci_conf[0x06] = 0x00;
+ pci_conf[0x07] = 0x02;
+ /* Miscellaneous Control, Port 70/74 Access Status,IDE interrupt Routing */
+ pci_conf[0x48] = 0x01;
+ pci_conf[0x4a] = 0x04;
+ pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 1/2/3 */
+ /* IDE Primary Channel IRQ Routing -> IRQ 14 */
+ /* IDE Secondary Channel IRQ Routing -> IRQ 15 */
+ /* PnP DMA Request Control, PnP Routing for LPT/FDC IRQ,
+ * PnP Routing for COM2/COM1 IRQ */
+ pci_conf[0x50] = 0x2d;
+ pci_conf[0x59] = 0x04;
+ pci_conf[0x5a] = 0x04;
+ pci_conf[0x5f] = 0x04;
+ pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
+ pci_conf[0x84] = 0x10;
+
+ vt82c->superio_conf->config[0xe0] = 0x3c;
+ vt82c->superio_conf->config[0xe2] = 0x03;
+ vt82c->superio_conf->config[0xe3] = 0xfc;
+ vt82c->superio_conf->config[0xe6] = 0xde;
+ vt82c->superio_conf->config[0xe7] = 0xfe;
+ vt82c->superio_conf->config[0xe8] = 0xbe;
+}
+
+/* read config pci function0 registers. PCI-ISA bridge */
+static uint32_t vt82c686b_read_config(PCIDevice * d, uint32_t address, int len)
+{
+ uint32_t val;
+
+ DPRINTF("vt82c686b_read_config address 0x%x len 0x%x \n", address, len);
+ switch (len) {
+ default:
+ case 4:
+ if (address <= 0xfc) {
+ val = le32_to_cpu(*(uint32_t *) (d->config + address));
+ break;
+ }
+ /* fall through */
+ case 2:
+ if (address <= 0xfe) {
+ val = le16_to_cpu(*(uint16_t *) (d->config + address));
+ break;
+ }
+ /* fall through */
+ case 1:
+ val = d->config[address];
+ break;
+ }
+ return val;
+}
+
+/* write config pci function0 registers. PCI-ISA bridge */
+static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
+ uint32_t val, int len)
+{
+ int can_write, i;
+ uint32_t addr;
+ VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
+
+ DPRINTF("vt82c686b_write_config address 0x%x val 0x%x len 0x%x \n",
+ address, val, len);
+
+ /* not efficient, but simple */
+ addr = address;
+ for (i = 0; i < len; i++) {
+ /* default read/write accesses */
+ switch (addr) {
+ case 0x00 ... 0x03:
+ case 0x08 ... 0x3f:
+ can_write = 0;
+ break;
+ default:
+ can_write = 1;
+ break;
+ }
+ if (can_write) {
+ switch (addr) {
+ case 0x85:
+ /* enable or disable super IO configure */
+ if (val & 0x2) {
+ /* floppy also uses 0x3f0 and 0x3f1.
+ * But we do not emulate flopy,so just set it here. */
+ isa_unassign_ioport(0x3f0, 2);
+ register_ioport_read(0x3f0, 2, 1, superio_ioport_readb,
+ vt82c->superio_conf);
+ register_ioport_write(0x3f0, 2, 1, superio_ioport_writeb,
+ vt82c->superio_conf);
+ } else {
+ isa_unassign_ioport(0x3f0, 2);
+ }
+ break;
+ }
+
+ d->config[addr] = val;
+ } else {
+ fprintf(stderr, "warning. vt82c686b_write_config: "
+ "write to read only pci conf register addr 0x%x\n", addr);
+ }
+ if (++addr > 0xff)
+ break;
+ val >>= 8;
+ }
+}
+
+static void vt82c686b_save(QEMUFile * f, void *opaque)
+{
+ PCIDevice *d = opaque;
+ pci_device_save(d, f);
+}
+
+static int vt82c686b_load(QEMUFile * f, void *opaque, int version_id)
+{
+ PCIDevice *d = opaque;
+ if (version_id != 1)
+ return -EINVAL;
+ return pci_device_load(d, f);
+}
+
+
+#define PM_FREQ 3579545
+
+#define ACPI_DBG_IO_ADDR 0xb044
+
+typedef struct VT686PMState {
+ PCIDevice dev;
+ uint16_t pmsts;
+ uint16_t pmen;
+ uint16_t pmcntrl;
+ uint8_t apmc;
+ uint8_t apms;
+ QEMUTimer *tmr_timer;
+ int64_t tmr_overflow_time;
+ i2c_bus *smbus;
+ uint8_t smb_stat;
+ uint8_t smb_ctl;
+ uint8_t smb_cmd;
+ uint8_t smb_addr;
+ uint8_t smb_data0;
+ uint8_t smb_data1;
+ uint8_t smb_data[32];
+ uint8_t smb_index;
+} VT686PMState;
+
+typedef struct VT686AC97State {
+ PCIDevice dev;
+ int unused;
+} VT686AC97State;
+
+typedef struct VT686MC97State {
+ PCIDevice dev;
+ int unused;
+} VT686MC97State;
+
+#define RTC_EN (1 << 10)
+#define PWRBTN_EN (1 << 8)
+#define GBL_EN (1 << 5)
+#define TMROF_EN (1 << 0)
+
+#define SCI_EN (1 << 0)
+
+#define SUS_EN (1 << 13)
+
+#define ACPI_ENABLE 0xf1
+#define ACPI_DISABLE 0xf0
+
+#define SMBHSTSTS 0x00
+#define SMBHSTCNT 0x02
+#define SMBHSTCMD 0x03
+#define SMBHSTADD 0x04
+#define SMBHSTDAT0 0x05
+#define SMBHSTDAT1 0x06
+#define SMBBLKDAT 0x07
+
+static uint32_t get_pmtmr(VT686PMState *s)
+{
+ uint32_t d;
+ d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec());
+ return d & 0xffffff;
+}
+
+static int get_pmsts(VT686PMState *s)
+{
+ int64_t d;
+ int pmsts;
+ pmsts = s->pmsts;
+ d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec());
+ if (d >= s->tmr_overflow_time)
+ s->pmsts |= TMROF_EN;
+ return pmsts;
+}
+
+static void pm_update_sci(VT686PMState *s)
+{
+ int sci_level, pmsts;
+ int64_t expire_time;
+
+ pmsts = get_pmsts(s);
+ sci_level = (((pmsts & s->pmen) &
+ (RTC_EN | PWRBTN_EN | GBL_EN | TMROF_EN)) != 0);
+ qemu_set_irq(s->dev.irq[0], sci_level);
+ /* schedule a timer interruption if needed */
+ if ((s->pmen & TMROF_EN) && !(pmsts & TMROF_EN)) {
+ expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(), PM_FREQ);
+ qemu_mod_timer(s->tmr_timer, expire_time);
+ } else {
+ qemu_del_timer(s->tmr_timer);
+ }
+}
+
+static void pm_tmr_timer(void *opaque)
+{
+ VT686PMState *s = opaque;
+ pm_update_sci(s);
+}
+
+static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
+{
+ VT686PMState *s = opaque;
+
+ addr &= 0x0f;
+ switch (addr) {
+ case 0x00:
+ {
+ int64_t d;
+ int pmsts;
+ pmsts = get_pmsts(s);
+ if (pmsts & val & TMROF_EN) {
+ /* if TMRSTS is reset, then compute the new overflow time */
+ d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec());
+ s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
+ }
+ s->pmsts &= ~val;
+ pm_update_sci(s);
+ }
+ break;
+ case 0x02:
+ s->pmen = val;
+ pm_update_sci(s);
+ break;
+ case 0x04:
+ {
+ int sus_typ;
+ s->pmcntrl = val & ~(SUS_EN);
+ if (val & SUS_EN) {
+ /* change suspend type */
+ sus_typ = (val >> 10) & 3;
+ switch (sus_typ) {
+ case 0: /* soft power off */
+ qemu_system_shutdown_request();
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ DPRINTF("PM writew port=0x%04x val=0x%02x\n", addr, val);
+}
+
+static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
+{
+ VT686PMState *s = opaque;
+ uint32_t val;
+
+ addr &= 0x0f;
+ switch (addr) {
+ case 0x00:
+ val = get_pmsts(s);
+ break;
+ case 0x02:
+ val = s->pmen;
+ break;
+ case 0x04:
+ val = s->pmcntrl;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+ DPRINTF("PM readw port=0x%04x val=0x%02x\n", addr, val);
+ return val;
+}
+
+static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
+{
+ addr &= 0x0f;
+ DPRINTF("PM writel port=0x%04x val=0x%08x\n", addr, val);
+}
+
+static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
+{
+ VT686PMState *s = opaque;
+ uint32_t val;
+
+ addr &= 0x0f;
+ switch (addr) {
+ case 0x08:
+ val = get_pmtmr(s);
+ break;
+ default:
+ val = 0;
+ break;
+ }
+ DPRINTF("PM readl port=0x%04x val=0x%08x\n", addr, val);
+ return val;
+}
+
+static void smb_transaction(VT686PMState *s)
+{
+ uint8_t prot = (s->smb_ctl >> 2) & 0x07;
+ uint8_t read = s->smb_addr & 0x01;
+ uint8_t cmd = s->smb_cmd;
+ uint8_t addr = s->smb_addr >> 1;
+ i2c_bus *bus = s->smbus;
+
+ DPRINTF("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
+ switch (prot) {
+ case 0x0:
+ smbus_quick_command(bus, addr, read);
+ break;
+ case 0x1:
+ if (read) {
+ s->smb_data0 = smbus_receive_byte(bus, addr);
+ } else {
+ smbus_send_byte(bus, addr, cmd);
+ }
+ break;
+ case 0x2:
+ if (read) {
+ s->smb_data0 = smbus_read_byte(bus, addr, cmd);
+ printf("smbus_read_byte:0x%04x\n",s->smb_data0);
+ } else {
+ smbus_write_byte(bus, addr, cmd, s->smb_data0);
+ printf("smbus_write_byte\n");
+ }
+ break;
+ case 0x3:
+ if (read) {
+ uint16_t val;
+ val = smbus_read_word(bus, addr, cmd);
+ s->smb_data0 = val;
+ s->smb_data1 = val >> 8;
+ } else {
+ smbus_write_word(bus, addr, cmd, (s->smb_data1 << 8) | s->smb_data0);
+ }
+ break;
+ case 0x5:
+ if (read) {
+ s->smb_data0 = smbus_read_block(bus, addr, cmd, s->smb_data);
+ } else {
+ smbus_write_block(bus, addr, cmd, s->smb_data, s->smb_data0);
+ }
+ break;
+ default:
+ goto error;
+ }
+ return;
+
+ error:
+ s->smb_stat |= 0x04;
+}
+
+static void smb_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
+{
+ VT686PMState *s = opaque;
+
+ addr &= 0x0f;
+ DPRINTF("SMB writeb port=0x%04x val=0x%02x\n", addr, val);
+
+ switch (addr) {
+ case SMBHSTSTS:
+ s->smb_stat = 0;
+ s->smb_index = 0;
+ break;
+ case SMBHSTCNT:
+ s->smb_ctl = val;
+ if (val & 0x40) {
+ smb_transaction(s);
+ }
+ break;
+ case SMBHSTCMD:
+ s->smb_cmd = val;
+ break;
+ case SMBHSTADD:
+ s->smb_addr = val;
+ break;
+ case SMBHSTDAT0:
+ s->smb_data0 = val;
+ break;
+ case SMBHSTDAT1:
+ s->smb_data1 = val;
+ break;
+ case SMBBLKDAT:
+ s->smb_data[s->smb_index++] = val;
+ if (s->smb_index > 31) {
+ s->smb_index = 0;
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static uint32_t smb_ioport_readb(void *opaque, uint32_t addr)
+{
+ VT686PMState *s = opaque;
+ uint32_t val;
+ addr &= 0x0f;
+
+ switch (addr) {
+ case SMBHSTSTS:
+ val = s->smb_stat;
+ break;
+ case SMBHSTCNT:
+ s->smb_index = 0;
+ val = s->smb_ctl & 0x1f;
+ break;
+ case SMBHSTCMD:
+ val = s->smb_cmd;
+ break;
+ case SMBHSTADD:
+ val = s->smb_addr;
+ break;
+ case SMBHSTDAT0:
+ val = s->smb_data0;
+ break;
+ case SMBHSTDAT1:
+ val = s->smb_data1;
+ break;
+ case SMBBLKDAT:
+ val = s->smb_data[s->smb_index++];
+ if (s->smb_index > 31)
+ s->smb_index = 0;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+ DPRINTF("SMB readb port=0x%04x val=0x%02x\n", addr, val);
+ return val;
+}
+
+static void pm_io_space_update(VT686PMState *s)
+{
+ uint32_t pm_io_base;
+
+ if (s->dev.config[0x80] & 1) {
+ pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
+ pm_io_base &= 0xffc0;
+
+ /* XXX: need to improve memory and ioport allocation */
+ DPRINTF("PM: mapping to 0x%x\n", pm_io_base);
+ register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s);
+ register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s);
+ register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s);
+ register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s);
+ }
+}
+
+/* read config pci function4 registers. PM*/
+static uint32_t pm_read_config(PCIDevice * d, uint32_t address, int len)
+{
+ uint32_t val;
+
+ DPRINTF("pm_read_config address 0x%x len 0x%x \n", address, len);
+ switch (len) {
+ default:
+ case 4:
+ if (address <= 0xfc) {
+ val = le32_to_cpu(*(uint32_t *) (d->config + address));
+ break;
+ }
+ /* fall through */
+ case 2:
+ if (address <= 0xfe) {
+ val = le16_to_cpu(*(uint16_t *) (d->config + address));
+ break;
+ }
+ /* fall through */
+ case 1:
+ val = d->config[address];
+ break;
+ }
+ return val;
+
+}
+
+static void pm_write_config(PCIDevice *d,
+ uint32_t address, uint32_t val, int len)
+{
+ DPRINTF("pm_write_config address 0x%x val 0x%x len 0x%x \n",
+ address, val, len);
+ pci_default_write_config(d, address, val, len);
+}
+
+static void pm_save(QEMUFile* f,void *opaque)
+{
+ VT686PMState *s = opaque;
+
+ pci_device_save(&s->dev, f);
+
+ qemu_put_be16s(f, &s->pmsts);
+ qemu_put_be16s(f, &s->pmen);
+ qemu_put_be16s(f, &s->pmcntrl);
+ qemu_put_8s(f, &s->apmc);
+ qemu_put_8s(f, &s->apms);
+ qemu_put_timer(f, s->tmr_timer);
+ qemu_put_be64(f, s->tmr_overflow_time);
+}
+
+static int pm_load(QEMUFile* f,void* opaque,int version_id)
+{
+ VT686PMState *s = opaque;
+ int ret;
+
+ if (version_id > 1)
+ return -EINVAL;
+
+ ret = pci_device_load(&s->dev, f);
+ if (ret < 0)
+ return ret;
+
+ qemu_get_be16s(f, &s->pmsts);
+ qemu_get_be16s(f, &s->pmen);
+ qemu_get_be16s(f, &s->pmcntrl);
+ qemu_get_8s(f, &s->apmc);
+ qemu_get_8s(f, &s->apms);
+ qemu_get_timer(f, s->tmr_timer);
+ s->tmr_overflow_time=qemu_get_be64(f);
+
+ pm_io_space_update(s);
+
+ return 0;
+}
+
+/*
+ * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
+ * just register a PCI device now, functionalities will be implemented later.
+ */
+
+void vt82c686b_ac97_init(PCIBus *bus, int devfn)
+{
+ VT686AC97State *s;
+ uint8_t *pci_conf;
+
+ s = (VT686AC97State *)pci_register_device(bus,
+ "vt82c686b_AC97", sizeof(VT686AC97State),
+ devfn, NULL, NULL);
+ pci_conf = s->dev.config;
+ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_AC97);
+ pci_config_set_class(pci_conf, PCI_CLASS_MULTIMEDIA_AUDIO);
+ pci_config_set_revision(pci_conf, 0x50);
+
+ pci_set_long(pci_conf + 0x04, 0x02100050);
+ pci_set_long(pci_conf + 0x10, 0x00000001);
+ pci_set_long(pci_conf + 0x14, 0x00000001);
+ pci_set_long(pci_conf + 0x3c, 0x00000300);
+ pci_set_long(pci_conf + 0x40, 0x1c000000);
+}
+
+void vt82c686b_mc97_init(PCIBus *bus, int devfn)
+{
+ VT686MC97State *s;
+ uint8_t *pci_conf;
+
+ s = (VT686MC97State *)pci_register_device(bus,
+ "vt82c686b_MC97", sizeof(VT686MC97State),
+ devfn, NULL, NULL);
+ pci_conf = s->dev.config;
+ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_MC97);
+ pci_config_set_class(pci_conf, PCI_CLASS_COMMUNICATION_OTHER);
+ pci_config_set_revision(pci_conf, 0x30);
+
+ pci_set_long(pci_conf + 0x04, 0x02000030);
+ pci_set_long(pci_conf + 0x10, 0x00000001);
+ pci_set_long(pci_conf + 0x14, 0x00000001);
+ pci_set_long(pci_conf + 0x3c, 0x00000300);
+ pci_set_long(pci_conf + 0x40, 0x1c000000);
+
+}
+
+/* vt82c686 pm init */
+i2c_bus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
+ qemu_irq sci_irq)
+{
+ VT686PMState *s;
+ uint8_t *pci_conf;
+
+ s = (VT686PMState *)pci_register_device(bus,
+ "vt82c686b_PM", sizeof(VT686PMState),
+ devfn, pm_read_config, pm_write_config);
+ pci_conf = s->dev.config;
+ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_ACPI);
+ pci_config_set_revision(pci_conf, 0x40);
+ pci_conf[0x04] = 0x00;
+ pci_conf[0x05] = 0x00;
+ pci_conf[0x06] = 0x80;
+ pci_conf[0x07] = 0x02;
+
+ pci_set_long(pci_conf + 0x34, 0x00000068);
+ pci_set_long(pci_conf + 0x48, 0x00000001);
+ pci_set_long(pci_conf + 0x68, 0x00020001);
+ pci_set_long(pci_conf + 0x70, 0x00000001);
+
+ /* SMB ports:0xeee0~0xeeef */
+ smb_io_base =((smb_io_base & 0xfff0) + 0x0);
+ pci_conf[0x90] = smb_io_base | 1;
+ pci_conf[0x91] = smb_io_base >> 8;
+ pci_conf[0xd2] = 0x90;
+ register_ioport_write(smb_io_base, 0xf, 1, smb_ioport_writeb, s);
+ register_ioport_read(smb_io_base, 0xf, 1, smb_ioport_readb, s);
+
+ s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
+
+ register_savevm("vt82c686b_PM", 0, 1, pm_save, pm_load, s);
+
+ s->smbus = i2c_init_bus(NULL, "i2c");
+ return s->smbus;
+}
+
+
+
+/* init the PCI-to-ISA bridge */
+static int vt82c686b_initfn(PCIDevice *d)
+{
+ uint8_t *pci_conf;
+
+ isa_bus_new(&d->qdev);
+ register_savevm("vt82c686b", 0, 1, vt82c686b_save, vt82c686b_load, d);
+
+ pci_conf = d->config;
+ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_ISA_BRIDGE);
+ pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_ISA);
+ pci_config_set_prog_interface(pci_conf, 0x0);
+ pci_config_set_revision(pci_conf,0x40); /* Revision 4.0 */
+ pci_conf[PCI_HEADER_TYPE] =
+ PCI_HEADER_TYPE_NORMAL | PCI_HEADER_TYPE_MULTI_FUNCTION;
+
+ qemu_register_reset(vt82c686b_reset, d);
+
+ return d->devfn;
+}
+
+int vt82c686b_init(PCIBus *bus, int devfn)
+{
+ PCIDevice *d;
+ VT82C686BState *vt82c;
+
+ d = pci_create_simple(bus, devfn, "VT82C686B");
+ vt82c = DO_UPCAST(VT82C686BState, dev, d);
+
+ /* set super io config */
+ vt82c->superio_conf = qemu_mallocz(sizeof(SuperIOConfig));
+
+ return d->devfn;
+}
+
+static PCIDeviceInfo via_info = {
+ .qdev.name = "VT82C686B",
+ .qdev.desc = "ISA bridge",
+ .qdev.size = sizeof(VT82C686BState),
+ .qdev.no_user = 1,
+ .init = vt82c686b_initfn,
+ .config_read = vt82c686b_read_config,
+ .config_write = vt82c686b_write_config,
+};
+
+static void vt82c686b_register(void)
+{
+ pci_qdev_register(&via_info);
+}
+device_init(vt82c686b_register);
resend by git send-email to avoid line-wrapping Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> --- Makefile.target | 2 +- hw/pc.h | 7 + hw/pci_ids.h | 8 + hw/vt82c686.c | 786 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 802 insertions(+), 1 deletions(-) create mode 100644 hw/vt82c686.c