Message ID | 1251484052-3939-27-git-send-email-lcapitulino@redhat.com |
---|---|
State | Superseded |
Headers | show |
Luiz Capitulino schrieb: > This suite contains tests to assure that QInt API works as expected. > > To execute it you should have check installed and build QEMU with > check support enabled (--enable-check-utests) and then run: > > $ ./check-qint > > Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> > --- > Makefile | 2 + > check-qint.c | 110 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > configure | 2 +- > 3 files changed, 113 insertions(+), 1 deletions(-) > create mode 100644 check-qint.c Shouldn't these tests better go in some subdirectory like tests/qobjects? > diff --git a/Makefile b/Makefile > index 983fe39..d08df6c 100644 > --- a/Makefile > +++ b/Makefile > @@ -181,6 +181,8 @@ qemu-io$(EXESUF): qemu-io.o qemu-tool.o cmd.o $(block-obj-y) > qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx > $(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $@") > > +check-qint: check-qint.o qint.o qemu-malloc.o > + > clean: > # avoid old build problems by removing potentially incorrect old files > rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h > diff --git a/check-qint.c b/check-qint.c > new file mode 100644 > index 0000000..ae5d22f > --- /dev/null > +++ b/check-qint.c > @@ -0,0 +1,110 @@ > +/* > + * QInt unit-tests. > + * > + * Copyright (C) 2009 Red Hat Inc. > + * > + * Authors: > + * Luiz Capitulino <lcapitulino@redhat.com> > + */ No license? Kevin
On Mon, 31 Aug 2009 09:55:53 +0200 Kevin Wolf <kwolf@redhat.com> wrote: > Luiz Capitulino schrieb: > > This suite contains tests to assure that QInt API works as expected. > > > > To execute it you should have check installed and build QEMU with > > check support enabled (--enable-check-utests) and then run: > > > > $ ./check-qint > > > > Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> > > --- > > Makefile | 2 + > > check-qint.c | 110 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > configure | 2 +- > > 3 files changed, 113 insertions(+), 1 deletions(-) > > create mode 100644 check-qint.c > > Shouldn't these tests better go in some subdirectory like tests/qobjects? I've tried to have them in tests/ but was unable to get them building. As I was spending much time on this I gave up. > > diff --git a/Makefile b/Makefile > > index 983fe39..d08df6c 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -181,6 +181,8 @@ qemu-io$(EXESUF): qemu-io.o qemu-tool.o cmd.o $(block-obj-y) > > qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx > > $(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $@") > > > > +check-qint: check-qint.o qint.o qemu-malloc.o > > + > > clean: > > # avoid old build problems by removing potentially incorrect old files > > rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h > > diff --git a/check-qint.c b/check-qint.c > > new file mode 100644 > > index 0000000..ae5d22f > > --- /dev/null > > +++ b/check-qint.c > > @@ -0,0 +1,110 @@ > > +/* > > + * QInt unit-tests. > > + * > > + * Copyright (C) 2009 Red Hat Inc. > > + * > > + * Authors: > > + * Luiz Capitulino <lcapitulino@redhat.com> > > + */ > > No license? This will sound silly, but they are so simple that I didn't mind adding the license text there. Will do once they are merged or if a respin is needed.
diff --git a/Makefile b/Makefile index 983fe39..d08df6c 100644 --- a/Makefile +++ b/Makefile @@ -181,6 +181,8 @@ qemu-io$(EXESUF): qemu-io.o qemu-tool.o cmd.o $(block-obj-y) qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx $(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $@") +check-qint: check-qint.o qint.o qemu-malloc.o + clean: # avoid old build problems by removing potentially incorrect old files rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h diff --git a/check-qint.c b/check-qint.c new file mode 100644 index 0000000..ae5d22f --- /dev/null +++ b/check-qint.c @@ -0,0 +1,110 @@ +/* + * QInt unit-tests. + * + * Copyright (C) 2009 Red Hat Inc. + * + * Authors: + * Luiz Capitulino <lcapitulino@redhat.com> + */ +#include <check.h> + +#include "qint.h" +#include "qemu-common.h" + +/* + * Public Interface test-cases + * + * (with some violations to access 'private' data) + */ + +START_TEST(qint_from_int_test) +{ + QInt *qi; + const int value = -42; + + qi = qint_from_int(value); + fail_unless(qi != NULL); + fail_unless(qi->value == value); + fail_unless(qi->base.refcnt == 1); + fail_unless(qobject_type(QOBJECT(qi)) == QTYPE_QINT); + + // destroy doesn't exit yet + qemu_free(qi); +} +END_TEST + +START_TEST(qint_destroy_test) +{ + QInt *qi = qint_from_int(0); + QDECREF(qi); +} +END_TEST + +START_TEST(qint_from_int64_test) +{ + QInt *qi; + const int64_t value = 0xffffffffffffffff; + + qi = qint_from_int(value); + fail_unless(qi->value == value); + + QDECREF(qi); +} +END_TEST + +START_TEST(qint_get_int_test) +{ + QInt *qi; + const int value = 123456; + + qi = qint_from_int(value); + fail_unless(qint_get_int(qi) == value); + + QDECREF(qi); +} +END_TEST + +START_TEST(qobject_to_qint_test) +{ + QInt *qi; + + qi = qint_from_int(0); + fail_unless(qobject_to_qint(QOBJECT(qi)) == qi); + + QDECREF(qi); +} +END_TEST + +static Suite *qint_suite(void) +{ + Suite *s; + TCase *qint_public_tcase; + + s = suite_create("QInt test-suite"); + + qint_public_tcase = tcase_create("Public Interface"); + suite_add_tcase(s, qint_public_tcase); + tcase_add_test(qint_public_tcase, qint_from_int_test); + tcase_add_test(qint_public_tcase, qint_destroy_test); + tcase_add_test(qint_public_tcase, qint_from_int64_test); + tcase_add_test(qint_public_tcase, qint_get_int_test); + tcase_add_test(qint_public_tcase, qobject_to_qint_test); + + return s; +} + +int main(void) +{ + int nf; + Suite *s; + SRunner *sr; + + s = qint_suite(); + sr = srunner_create(s); + + srunner_run_all(sr, CK_NORMAL); + nf = srunner_ntests_failed(sr); + srunner_free(sr); + + return (nf == 0) ? EXIT_SUCCESS : EXIT_FAILURE; +} diff --git a/configure b/configure index 92d29c9..248cc0b 100755 --- a/configure +++ b/configure @@ -1927,7 +1927,7 @@ if test `expr "$target_list" : ".*softmmu.*"` != 0 ; then if [ "$linux" = "yes" ] ; then tools="qemu-nbd\$(EXESUF) qemu-io\$(EXESUF) $tools" if [ "$check_utests" = "yes" ]; then - tools="$tools" + tools="check-qint $tools" fi fi fi
This suite contains tests to assure that QInt API works as expected. To execute it you should have check installed and build QEMU with check support enabled (--enable-check-utests) and then run: $ ./check-qint Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> --- Makefile | 2 + check-qint.c | 110 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ configure | 2 +- 3 files changed, 113 insertions(+), 1 deletions(-) create mode 100644 check-qint.c