Message ID | 20220630045133.32251-1-me@pjd.dev |
---|---|
Headers | show |
Series | hw/i2c/aspeed: I2C slave mode DMA RX w/ new regs | expand |
On 6/30/22 06:51, Peter Delevoryas wrote: > From: Peter Delevoryas <pdel@fb.com> It is good practice to keep the Reviewed/Tested/Acked tags sent on the previous version of a patchset. I should have told you in v2. For next time ! :) Thanks, C. > v3: > - hw/i2c/pmbus_device: > - Removed commit that resets the out buf. > - Removed IC_DEVICE_ID > - Added commit to allow devices to move to an idle state that > avoids enqueuing excess data into the out buf. > - hw/sensor/isl_pmbus_vr: > - Added IC_DEVICE_ID commit just for voltage regulators. > - Added ISL69259 with an IC_DEVICE_ID. > - hw/misc/aspeed_peci: > - Moved registers from .h to .c > - Replaced guest_error on interrupt disable case with trace > for all interrupts (not just when they're disabled). > - Removed leftover qemu_irq_raise > > Thanks, > Peter > > Klaus Jensen (3): > hw/i2c: support multiple masters > hw/i2c: add asynchronous send > hw/i2c/aspeed: add slave device in old register mode > > Peter Delevoryas (11): > hw/i2c/aspeed: Fix R_I2CD_FUN_CTRL reference > hw/i2c/aspeed: Fix DMA len write-enable bit handling > hw/i2c/aspeed: Fix MASTER_EN missing error message > hw/i2c/aspeed: Add new-registers DMA slave mode RX support > hw/i2c/pmbus: Add idle state to return 0xff's > hw/sensor: Add IC_DEVICE_ID to ISL voltage regulators > hw/sensor: Add Renesas ISL69259 device model > hw/misc/aspeed: Add PECI controller > hw/misc/aspeed: Add fby35-sb-cpld > hw/misc/aspeed: Add intel-me > hw/arm/aspeed: Add oby35-cl machine > > MAINTAINERS | 2 + > hw/arm/aspeed.c | 48 +++++++ > hw/arm/aspeed_ast10x0.c | 12 ++ > hw/arm/aspeed_ast2600.c | 12 ++ > hw/arm/aspeed_soc.c | 13 ++ > hw/arm/pxa2xx.c | 2 + > hw/display/sii9022.c | 2 + > hw/display/ssd0303.c | 2 + > hw/i2c/aspeed_i2c.c | 234 +++++++++++++++++++++++++++---- > hw/i2c/core.c | 70 ++++++++- > hw/i2c/pmbus_device.c | 9 ++ > hw/i2c/smbus_slave.c | 4 + > hw/i2c/trace-events | 2 + > hw/misc/aspeed_peci.c | 152 ++++++++++++++++++++ > hw/misc/fby35_sb_cpld.c | 128 +++++++++++++++++ > hw/misc/intel_me.c | 162 +++++++++++++++++++++ > hw/misc/meson.build | 5 +- > hw/misc/trace-events | 13 ++ > hw/nvram/eeprom_at24c.c | 2 + > hw/sensor/isl_pmbus_vr.c | 40 ++++++ > hw/sensor/lsm303dlhc_mag.c | 2 + > include/hw/arm/aspeed_soc.h | 3 + > include/hw/i2c/aspeed_i2c.h | 11 ++ > include/hw/i2c/i2c.h | 30 ++++ > include/hw/i2c/pmbus_device.h | 7 + > include/hw/misc/aspeed_peci.h | 29 ++++ > include/hw/sensor/isl_pmbus_vr.h | 5 + > 27 files changed, 971 insertions(+), 30 deletions(-) > create mode 100644 hw/misc/aspeed_peci.c > create mode 100644 hw/misc/fby35_sb_cpld.c > create mode 100644 hw/misc/intel_me.c > create mode 100644 include/hw/misc/aspeed_peci.h >
On 6/30/22 06:51, Peter Delevoryas wrote: > From: Peter Delevoryas <pdel@fb.com> > > v3: > - hw/i2c/pmbus_device: > - Removed commit that resets the out buf. > - Removed IC_DEVICE_ID > - Added commit to allow devices to move to an idle state that > avoids enqueuing excess data into the out buf. > - hw/sensor/isl_pmbus_vr: > - Added IC_DEVICE_ID commit just for voltage regulators. > - Added ISL69259 with an IC_DEVICE_ID. > - hw/misc/aspeed_peci: > - Moved registers from .h to .c > - Replaced guest_error on interrupt disable case with trace > for all interrupts (not just when they're disabled). > - Removed leftover qemu_irq_raise I have taken patches 1-7,11 for the next Aspeed PR. Thanks, C. > Thanks, > Peter > > Klaus Jensen (3): > hw/i2c: support multiple masters > hw/i2c: add asynchronous send > hw/i2c/aspeed: add slave device in old register mode > > Peter Delevoryas (11): > hw/i2c/aspeed: Fix R_I2CD_FUN_CTRL reference > hw/i2c/aspeed: Fix DMA len write-enable bit handling > hw/i2c/aspeed: Fix MASTER_EN missing error message > hw/i2c/aspeed: Add new-registers DMA slave mode RX support > hw/i2c/pmbus: Add idle state to return 0xff's > hw/sensor: Add IC_DEVICE_ID to ISL voltage regulators > hw/sensor: Add Renesas ISL69259 device model > hw/misc/aspeed: Add PECI controller > hw/misc/aspeed: Add fby35-sb-cpld > hw/misc/aspeed: Add intel-me > hw/arm/aspeed: Add oby35-cl machine > > MAINTAINERS | 2 + > hw/arm/aspeed.c | 48 +++++++ > hw/arm/aspeed_ast10x0.c | 12 ++ > hw/arm/aspeed_ast2600.c | 12 ++ > hw/arm/aspeed_soc.c | 13 ++ > hw/arm/pxa2xx.c | 2 + > hw/display/sii9022.c | 2 + > hw/display/ssd0303.c | 2 + > hw/i2c/aspeed_i2c.c | 234 +++++++++++++++++++++++++++---- > hw/i2c/core.c | 70 ++++++++- > hw/i2c/pmbus_device.c | 9 ++ > hw/i2c/smbus_slave.c | 4 + > hw/i2c/trace-events | 2 + > hw/misc/aspeed_peci.c | 152 ++++++++++++++++++++ > hw/misc/fby35_sb_cpld.c | 128 +++++++++++++++++ > hw/misc/intel_me.c | 162 +++++++++++++++++++++ > hw/misc/meson.build | 5 +- > hw/misc/trace-events | 13 ++ > hw/nvram/eeprom_at24c.c | 2 + > hw/sensor/isl_pmbus_vr.c | 40 ++++++ > hw/sensor/lsm303dlhc_mag.c | 2 + > include/hw/arm/aspeed_soc.h | 3 + > include/hw/i2c/aspeed_i2c.h | 11 ++ > include/hw/i2c/i2c.h | 30 ++++ > include/hw/i2c/pmbus_device.h | 7 + > include/hw/misc/aspeed_peci.h | 29 ++++ > include/hw/sensor/isl_pmbus_vr.h | 5 + > 27 files changed, 971 insertions(+), 30 deletions(-) > create mode 100644 hw/misc/aspeed_peci.c > create mode 100644 hw/misc/fby35_sb_cpld.c > create mode 100644 hw/misc/intel_me.c > create mode 100644 include/hw/misc/aspeed_peci.h >
From: Peter Delevoryas <pdel@fb.com> v3: - hw/i2c/pmbus_device: - Removed commit that resets the out buf. - Removed IC_DEVICE_ID - Added commit to allow devices to move to an idle state that avoids enqueuing excess data into the out buf. - hw/sensor/isl_pmbus_vr: - Added IC_DEVICE_ID commit just for voltage regulators. - Added ISL69259 with an IC_DEVICE_ID. - hw/misc/aspeed_peci: - Moved registers from .h to .c - Replaced guest_error on interrupt disable case with trace for all interrupts (not just when they're disabled). - Removed leftover qemu_irq_raise Thanks, Peter Klaus Jensen (3): hw/i2c: support multiple masters hw/i2c: add asynchronous send hw/i2c/aspeed: add slave device in old register mode Peter Delevoryas (11): hw/i2c/aspeed: Fix R_I2CD_FUN_CTRL reference hw/i2c/aspeed: Fix DMA len write-enable bit handling hw/i2c/aspeed: Fix MASTER_EN missing error message hw/i2c/aspeed: Add new-registers DMA slave mode RX support hw/i2c/pmbus: Add idle state to return 0xff's hw/sensor: Add IC_DEVICE_ID to ISL voltage regulators hw/sensor: Add Renesas ISL69259 device model hw/misc/aspeed: Add PECI controller hw/misc/aspeed: Add fby35-sb-cpld hw/misc/aspeed: Add intel-me hw/arm/aspeed: Add oby35-cl machine MAINTAINERS | 2 + hw/arm/aspeed.c | 48 +++++++ hw/arm/aspeed_ast10x0.c | 12 ++ hw/arm/aspeed_ast2600.c | 12 ++ hw/arm/aspeed_soc.c | 13 ++ hw/arm/pxa2xx.c | 2 + hw/display/sii9022.c | 2 + hw/display/ssd0303.c | 2 + hw/i2c/aspeed_i2c.c | 234 +++++++++++++++++++++++++++---- hw/i2c/core.c | 70 ++++++++- hw/i2c/pmbus_device.c | 9 ++ hw/i2c/smbus_slave.c | 4 + hw/i2c/trace-events | 2 + hw/misc/aspeed_peci.c | 152 ++++++++++++++++++++ hw/misc/fby35_sb_cpld.c | 128 +++++++++++++++++ hw/misc/intel_me.c | 162 +++++++++++++++++++++ hw/misc/meson.build | 5 +- hw/misc/trace-events | 13 ++ hw/nvram/eeprom_at24c.c | 2 + hw/sensor/isl_pmbus_vr.c | 40 ++++++ hw/sensor/lsm303dlhc_mag.c | 2 + include/hw/arm/aspeed_soc.h | 3 + include/hw/i2c/aspeed_i2c.h | 11 ++ include/hw/i2c/i2c.h | 30 ++++ include/hw/i2c/pmbus_device.h | 7 + include/hw/misc/aspeed_peci.h | 29 ++++ include/hw/sensor/isl_pmbus_vr.h | 5 + 27 files changed, 971 insertions(+), 30 deletions(-) create mode 100644 hw/misc/aspeed_peci.c create mode 100644 hw/misc/fby35_sb_cpld.c create mode 100644 hw/misc/intel_me.c create mode 100644 include/hw/misc/aspeed_peci.h