Message ID | 20240925093956.2449119-1-william@wkennington.com |
---|---|
State | New |
Headers | show |
Series | ARM: dts: nuvoton: Add UDC nodes | expand |
On Wed, 2024-09-25 at 02:39 -0700, William A. Kennington III wrote: > The driver support was already added but we are missing the nodes in our > common devicetree. This enables npcm7xx platforms to enable the udc > nodes and expose USB devices endpoints. > > Signed-off-by: William A. Kennington III <william@wkennington.com> Tomer: I'll apply this for Joel to pick up if it looks good to you. Thanks, Andrew
Hi William, On Wed, 2024-09-25 at 02:39 -0700, William A. Kennington III wrote: > The driver support was already added but we are missing the nodes in our > common devicetree. This enables npcm7xx platforms to enable the udc > nodes and expose USB devices endpoints. > > Signed-off-by: William A. Kennington III <william@wkennington.com> > --- > .../dts/nuvoton/nuvoton-common-npcm7xx.dtsi | 71 +++++++++++++++++++ > .../arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi | 65 +++++++++++++++++ > 2 files changed, 136 insertions(+) > > diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi > index 868454ae6bde..358b52894ac0 100644 > --- a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi > +++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi > @@ -99,6 +99,11 @@ rst: rst@801000 { > }; > }; > > + udc0_phy: usb-phy { > + compatible = "usb-nop-xceiv"; > + #phy-cells = <0>; > + }; > + > ahb { > #address-cells = <1>; > #size-cells = <1>; > @@ -179,6 +184,72 @@ fiux: spi@fb001000 { > status = "disabled"; > }; > > + udc5: udc@f0835000 { Testing this with `make CHECK_DTBS=y nuvoton/nuvoton-npcm750-evb.dtb` causes the following additional warning: +/home/andrew/src/kernel.org/linux/origin/build.multi_v5/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dtb: udc@f0835000: $nodename:0: 'udc@f0835000' does not match '^usb(@.*)?' + from schema $id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml# This is the same for all the other nodes added. Can you please fix that up in a v2? Andrew > + compatible = "nuvoton,npcm750-udc"; > + reg = <0xf0835000 0x1000 > + 0xfffd2800 0x800>; > + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk NPCM7XX_CLK_SU>; > + clock-names = "clk_usb_bridge"; > + phys = <&udc0_phy>; > + phy_type = "utmi_wide"; > + dr_mode = "peripheral"; > + status = "disabled"; > + }; > + > + udc6: udc@f0836000 { > + compatible = "nuvoton,npcm750-udc"; > + reg = <0xf0836000 0x1000 > + 0xfffd3000 0x800>; > + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk NPCM7XX_CLK_SU>; > + clock-names = "clk_usb_bridge"; > + phys = <&udc0_phy>; > + phy_type = "utmi_wide"; > + dr_mode = "peripheral"; > + status = "disabled"; > + }; > + > + udc7: udc@f0837000 { > + compatible = "nuvoton,npcm750-udc"; > + reg = <0xf0837000 0x1000 > + 0xfffd3800 0x800>; > + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk NPCM7XX_CLK_SU>; > + clock-names = "clk_usb_bridge"; > + phys = <&udc0_phy>; > + phy_type = "utmi_wide"; > + dr_mode = "peripheral"; > + status = "disabled"; > + }; > + > + udc8: udc@f0838000 { > + compatible = "nuvoton,npcm750-udc"; > + reg = <0xf0838000 0x1000 > + 0xfffd4000 0x800>; > + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk NPCM7XX_CLK_SU>; > + clock-names = "clk_usb_bridge"; > + phys = <&udc0_phy>; > + phy_type = "utmi_wide"; > + dr_mode = "peripheral"; > + status = "disabled"; > + }; > + > + udc9: udc@f0839000 { > + compatible = "nuvoton,npcm750-udc"; > + reg = <0xf0839000 0x1000 > + 0xfffd4800 0x800>; > + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk NPCM7XX_CLK_SU>; > + clock-names = "clk_usb_bridge"; > + nuvoton,sysgcr = <&gcr>; > + phys = <&udc0_phy>; > + phy_type = "utmi_wide"; > + dr_mode = "peripheral"; > + status = "disabled"; > + }; > + > apb { > #address-cells = <1>; > #size-cells = <1>; > diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi > index 30eed40b89b5..00615e7d1462 100644 > --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi > +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi > @@ -58,5 +58,70 @@ gmac1: eth@f0804000 { > &rg2mdio_pins>; > status = "disabled"; > }; > + > + udc0:udc@f0830000 { > + compatible = "nuvoton,npcm750-udc"; > + reg = <0x0 0xf0830000 0x0 0x1000 > + 0x0 0xfffeb000 0x0 0x800>; > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk NPCM7XX_CLK_SU>; > + clock-names = "clk_usb_bridge"; > + phys = <&udc0_phy>; > + phy_type = "utmi_wide"; > + dr_mode = "peripheral"; > + status = "disabled"; > + }; > + > + udc1:udc@f0831000 { > + compatible = "nuvoton,npcm750-udc"; > + reg = <0x0 0xf0831000 0x0 0x1000 > + 0x0 0xfffeb800 0x0 0x800>; > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk NPCM7XX_CLK_SU>; > + clock-names = "clk_usb_bridge"; > + phys = <&udc0_phy>; > + phy_type = "utmi_wide"; > + dr_mode = "peripheral"; > + status = "disabled"; > + }; > + > + udc2:udc@f0832000 { > + compatible = "nuvoton,npcm750-udc"; > + reg = <0x0 0xf0832000 0x0 0x1000 > + 0x0 0xfffec000 0x0 0x800>; > + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk NPCM7XX_CLK_SU>; > + clock-names = "clk_usb_bridge"; > + phys = <&udc0_phy>; > + phy_type = "utmi_wide"; > + dr_mode = "peripheral"; > + status = "disabled"; > + }; > + > + udc3:udc@f0833000 { > + compatible = "nuvoton,npcm750-udc"; > + reg = <0x0 0xf0833000 0x0 0x1000 > + 0x0 0xfffec800 0x0 0x800>; > + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk NPCM7XX_CLK_SU>; > + clock-names = "clk_usb_bridge"; > + phys = <&udc0_phy>; > + phy_type = "utmi_wide"; > + dr_mode = "peripheral"; > + status = "disabled"; > + }; > + > + udc4:udc@f0834000 { > + compatible = "nuvoton,npcm750-udc"; > + reg = <0x0 0xf0834000 0x0 0x1000 > + 0x0 0xfffed000 0x0 0x800>; > + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk NPCM7XX_CLK_SU>; > + clock-names = "clk_usb_bridge"; > + phys = <&udc0_phy>; > + phy_type = "utmi_wide"; > + dr_mode = "peripheral"; > + status = "disabled"; > + }; > }; > };
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi index 868454ae6bde..358b52894ac0 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi +++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi @@ -99,6 +99,11 @@ rst: rst@801000 { }; }; + udc0_phy: usb-phy { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + ahb { #address-cells = <1>; #size-cells = <1>; @@ -179,6 +184,72 @@ fiux: spi@fb001000 { status = "disabled"; }; + udc5: udc@f0835000 { + compatible = "nuvoton,npcm750-udc"; + reg = <0xf0835000 0x1000 + 0xfffd2800 0x800>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_SU>; + clock-names = "clk_usb_bridge"; + phys = <&udc0_phy>; + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "disabled"; + }; + + udc6: udc@f0836000 { + compatible = "nuvoton,npcm750-udc"; + reg = <0xf0836000 0x1000 + 0xfffd3000 0x800>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_SU>; + clock-names = "clk_usb_bridge"; + phys = <&udc0_phy>; + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "disabled"; + }; + + udc7: udc@f0837000 { + compatible = "nuvoton,npcm750-udc"; + reg = <0xf0837000 0x1000 + 0xfffd3800 0x800>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_SU>; + clock-names = "clk_usb_bridge"; + phys = <&udc0_phy>; + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "disabled"; + }; + + udc8: udc@f0838000 { + compatible = "nuvoton,npcm750-udc"; + reg = <0xf0838000 0x1000 + 0xfffd4000 0x800>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_SU>; + clock-names = "clk_usb_bridge"; + phys = <&udc0_phy>; + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "disabled"; + }; + + udc9: udc@f0839000 { + compatible = "nuvoton,npcm750-udc"; + reg = <0xf0839000 0x1000 + 0xfffd4800 0x800>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_SU>; + clock-names = "clk_usb_bridge"; + nuvoton,sysgcr = <&gcr>; + phys = <&udc0_phy>; + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "disabled"; + }; + apb { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi index 30eed40b89b5..00615e7d1462 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi @@ -58,5 +58,70 @@ gmac1: eth@f0804000 { &rg2mdio_pins>; status = "disabled"; }; + + udc0:udc@f0830000 { + compatible = "nuvoton,npcm750-udc"; + reg = <0x0 0xf0830000 0x0 0x1000 + 0x0 0xfffeb000 0x0 0x800>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_SU>; + clock-names = "clk_usb_bridge"; + phys = <&udc0_phy>; + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "disabled"; + }; + + udc1:udc@f0831000 { + compatible = "nuvoton,npcm750-udc"; + reg = <0x0 0xf0831000 0x0 0x1000 + 0x0 0xfffeb800 0x0 0x800>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_SU>; + clock-names = "clk_usb_bridge"; + phys = <&udc0_phy>; + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "disabled"; + }; + + udc2:udc@f0832000 { + compatible = "nuvoton,npcm750-udc"; + reg = <0x0 0xf0832000 0x0 0x1000 + 0x0 0xfffec000 0x0 0x800>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_SU>; + clock-names = "clk_usb_bridge"; + phys = <&udc0_phy>; + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "disabled"; + }; + + udc3:udc@f0833000 { + compatible = "nuvoton,npcm750-udc"; + reg = <0x0 0xf0833000 0x0 0x1000 + 0x0 0xfffec800 0x0 0x800>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_SU>; + clock-names = "clk_usb_bridge"; + phys = <&udc0_phy>; + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "disabled"; + }; + + udc4:udc@f0834000 { + compatible = "nuvoton,npcm750-udc"; + reg = <0x0 0xf0834000 0x0 0x1000 + 0x0 0xfffed000 0x0 0x800>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_SU>; + clock-names = "clk_usb_bridge"; + phys = <&udc0_phy>; + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "disabled"; + }; }; };
The driver support was already added but we are missing the nodes in our common devicetree. This enables npcm7xx platforms to enable the udc nodes and expose USB devices endpoints. Signed-off-by: William A. Kennington III <william@wkennington.com> --- .../dts/nuvoton/nuvoton-common-npcm7xx.dtsi | 71 +++++++++++++++++++ .../arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi | 65 +++++++++++++++++ 2 files changed, 136 insertions(+)