@@ -266,7 +266,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
/* Ooops. All transmit buffers are full. Bail out.
* This should not happen, since ndev->tbusy should be set.
*/
- printk("%s: tx queue full!.\n", ndev->name);
+ netdev_err(ndev, "tx queue full!\n");
return NETDEV_TX_BUSY;
}
@@ -578,7 +578,7 @@ fec_stop(struct net_device *ndev)
writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */
udelay(10);
if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA))
- printk("fec_stop : Graceful transmit stop did not complete !\n");
+ netdev_err(ndev, "Graceful transmit stop did not complete!\n");
}
/* Whack a reset. We should wait for this. */
@@ -676,7 +676,7 @@ fec_enet_tx(struct net_device *ndev)
}
if (status & BD_ENET_TX_READY)
- printk("HEY! Enet xmit interrupt and TX_READY.\n");
+ netdev_err(ndev, "HEY! Enet xmit interrupt and TX_READY\n");
/* Deferred means some collisions occurred during transmit,
* but we eventually sent the packet OK.
@@ -744,7 +744,7 @@ fec_enet_rx(struct net_device *ndev, int budget)
* the last indicator should be set.
*/
if ((status & BD_ENET_RX_LAST) == 0)
- printk("FEC ENET: rcv is not +last\n");
+ netdev_err(ndev, "rcv is not +last\n");
if (!fep->opened)
goto rx_processing_done;
@@ -1031,7 +1031,7 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
usecs_to_jiffies(FEC_MII_TIMEOUT));
if (time_left == 0) {
fep->mii_timeout = 1;
- printk(KERN_ERR "FEC: MDIO read timeout\n");
+ netdev_err(fep->netdev, "MDIO read timeout\n");
return -ETIMEDOUT;
}
@@ -1059,7 +1059,7 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
usecs_to_jiffies(FEC_MII_TIMEOUT));
if (time_left == 0) {
fep->mii_timeout = 1;
- printk(KERN_ERR "FEC: MDIO write timeout\n");
+ netdev_err(fep->netdev, "MDIO write timeout\n");
return -ETIMEDOUT;
}
@@ -1099,9 +1099,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)
}
if (phy_id >= PHY_MAX_ADDR) {
- printk(KERN_INFO
- "%s: no PHY, assuming direct connection to switch\n",
- ndev->name);
+ netdev_info(ndev, "no PHY, assuming direct connection to switch\n");
strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE);
phy_id = 0;
}
@@ -1110,7 +1108,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)
phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link,
fep->phy_interface);
if (IS_ERR(phy_dev)) {
- printk(KERN_ERR "%s: could not attach to PHY\n", ndev->name);
+ netdev_err(ndev, "could not attach to PHY\n");
return PTR_ERR(phy_dev);
}
@@ -1128,11 +1126,9 @@ static int fec_enet_mii_probe(struct net_device *ndev)
fep->link = 0;
fep->full_duplex = 0;
- printk(KERN_INFO
- "%s: Freescale FEC PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
- ndev->name,
- fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
- fep->phy_dev->irq);
+ netdev_info(ndev, "Freescale FEC PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+ fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
+ fep->phy_dev->irq);
return 0;
}
@@ -14,6 +14,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/dma-mapping.h>
#include <linux/module.h>
@@ -858,13 +860,11 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* Reserve FEC control zone */
rv = of_address_to_resource(np, 0, &mem);
if (rv) {
- printk(KERN_ERR DRIVER_NAME ": "
- "Error while parsing device node resource\n" );
+ pr_err("Error while parsing device node resource\n");
goto err_netdev;
}
if (resource_size(&mem) < sizeof(struct mpc52xx_fec)) {
- printk(KERN_ERR DRIVER_NAME
- " - invalid resource size (%lx < %x), check mpc52xx_devices.c\n",
+ pr_err("invalid resource size (%lx < %x), check mpc52xx_devices.c\n",
(unsigned long)resource_size(&mem),
sizeof(struct mpc52xx_fec));
rv = -EINVAL;
@@ -902,7 +902,7 @@ static int mpc52xx_fec_probe(struct platform_device *op)
priv->tx_dmatsk = bcom_fec_tx_init(FEC_TX_NUM_BD, tx_fifo);
if (!priv->rx_dmatsk || !priv->tx_dmatsk) {
- printk(KERN_ERR DRIVER_NAME ": Can not init SDMA tasks\n" );
+ pr_err("Can not init SDMA tasks\n");
rv = -ENOMEM;
goto err_rx_tx_dmatsk;
}
@@ -982,8 +982,8 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* We're done ! */
dev_set_drvdata(&op->dev, ndev);
- printk(KERN_INFO "%s: %s MAC %pM\n",
- ndev->name, op->dev.of_node->full_name, ndev->dev_addr);
+ netdev_info(ndev, "%s MAC %pM\n",
+ op->dev.of_node->full_name, ndev->dev_addr);
return 0;
@@ -1094,7 +1094,7 @@ mpc52xx_fec_init(void)
int ret;
ret = platform_driver_register(&mpc52xx_fec_mdio_driver);
if (ret) {
- printk(KERN_ERR DRIVER_NAME ": failed to register mdio driver\n");
+ pr_err("failed to register mdio driver\n");
return ret;
}
#endif
@@ -17,6 +17,8 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
Use a more current logging message style. Convert the printks where a struct net_device is available to netdev_<level>. Convert the other printks to pr_<level> and add pr_fmt where appropriate. Signed-off-by: Joe Perches <joe@perches.com> --- drivers/net/ethernet/freescale/fec_main.c | 26 +++++++++++--------------- drivers/net/ethernet/freescale/fec_mpc52xx.c | 16 ++++++++-------- drivers/net/ethernet/freescale/fec_ptp.c | 2 ++ 3 files changed, 21 insertions(+), 23 deletions(-)