Message ID | CAOMZO5B7+Qy06m7O=v1M3vt7to7ciKOhQOihVgAEf+utntvw4w@mail.gmail.com (mailing list archive) |
---|---|
State | Awaiting Upstream, archived |
Headers | show |
Hi Fabio On Sun, 2012-06-10 at 15:41 -0300, Fabio Estevam wrote: > Hi Christoph, > > On Mon, Jun 4, 2012 at 8:37 AM, Christoph Fritz > <chf.fritz@googlemail.com> wrote: > > > After that, I stumbled upon this dmesg: > > > > Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007) > > fsl-usb2-udc fsl-usb2-udc: clk_get("usb") failed > > fsl-usb2-udc: probe of fsl-usb2-udc failed with error -2 > > > > Sascha, could you give me a hint? > > Does the patch below fix your problem? Thanks for your patch. It does indeed load "Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007)" fine - but now when I want to use it: modprobe g_ether [ 17.099363] g_ether gadget: using random self ethernet address [ 17.105316] g_ether gadget: using random host ethernet address [ 17.111974] usb0: MAC 1a:c7:9e:76:cc:45 [ 17.115866] usb0: HOST MAC 66:a2:4a:0a:46:17 [ 17.120199] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 17.126861] g_ether gadget: g_ether ready these are "the last words": System hangs completely. Same behavior with g_serial (these two I've tested). Currently I can't investigate this further, not because of a bug - but a flu. Thanks, -- Christoph
On Tue, Jun 12, 2012 at 4:40 PM, Christoph Fritz <chf.fritz@googlemail.com> wrote: > Thanks for your patch. It does indeed load > "Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007)" > fine - but now when I want to use it: > > modprobe g_ether > [ 17.099363] g_ether gadget: using random self ethernet address > [ 17.105316] g_ether gadget: using random host ethernet address > [ 17.111974] usb0: MAC 1a:c7:9e:76:cc:45 > [ 17.115866] usb0: HOST MAC 66:a2:4a:0a:46:17 > [ 17.120199] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 > [ 17.126861] g_ether gadget: g_ether ready > > these are "the last words": System hangs completely. Same behavior with > g_serial (these two I've tested). Ok, I just sent a new patch to the linux-usb mailing list. Tested it on a mx31 and mx51 and it probed g_ether fine. I don't have a mx35 handy. > > Currently I can't investigate this further, not because of a bug - but a > flu. Hope you get better soon. Regards, Fabio Estevam
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index dcbc0a2..c3ade6b 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -36,21 +36,21 @@ int fsl_udc_clk_init(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (!cpu_is_mx35() && !cpu_is_mx25()) { - mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb"); + mxc_ahb_clk = clk_get(&pdev->dev, "ipg"); if (IS_ERR(mxc_ahb_clk)) return PTR_ERR(mxc_ahb_clk); - ret = clk_enable(mxc_ahb_clk); + ret = clk_prepare_enable(mxc_ahb_clk); if (ret < 0) { - dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n"); + dev_err(&pdev->dev, "clk_enable(\"ipg\") failed\n"); goto eenahb; } } /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ - mxc_usb_clk = clk_get(&pdev->dev, "usb"); + mxc_usb_clk = clk_get(&pdev->dev, "per"); if (IS_ERR(mxc_usb_clk)) { - dev_err(&pdev->dev, "clk_get(\"usb\") failed\n"); + dev_err(&pdev->dev, "clk_get(\"per\") failed\n"); ret = PTR_ERR(mxc_usb_clk); goto egusb; } @@ -65,7 +65,7 @@ int fsl_udc_clk_init(struct platform_device *pdev) } } - ret = clk_enable(mxc_usb_clk); + ret = clk_prepare_enable(mxc_usb_clk); if (ret < 0) { dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n"); goto eenusb; @@ -79,7 +79,7 @@ eclkrate: mxc_usb_clk = NULL; egusb: if (!cpu_is_mx35()) - clk_disable(mxc_ahb_clk); + clk_disable_unprepare(mxc_ahb_clk); eenahb: if (!cpu_is_mx35()) clk_put(mxc_ahb_clk); @@ -104,7 +104,7 @@ void fsl_udc_clk_finalize(struct platform_device *pdev) /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { - clk_disable(mxc_usb_clk); + clk_disable_unprepare(mxc_usb_clk); clk_put(mxc_usb_clk); mxc_usb_clk = NULL; } @@ -113,11 +113,11 @@ void fsl_udc_clk_finalize(struct platform_device *pdev) void fsl_udc_clk_release(void) { if (mxc_usb_clk) { - clk_disable(mxc_usb_clk); + clk_disable_unprepare(mxc_usb_clk); clk_put(mxc_usb_clk); } if (!cpu_is_mx35()) { - clk_disable(mxc_ahb_clk); + clk_disable_unprepare(mxc_ahb_clk); clk_put(mxc_ahb_clk); } }