@@ -57,6 +57,8 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev);
#endif /* CONFIG_EEH */
+int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn);
+
#define PCI_BUSNO(bdfn) ((bdfn >> 8) & 0xff)
#else /* CONFIG_PCI */
@@ -26,6 +26,7 @@
#include <asm/mpic.h>
#include <asm/i8259.h>
#include <asm/swiotlb.h>
+#include <asm/ppc-pci.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -107,9 +108,6 @@ void __init mpc85xx_ds_pic_init(void)
}
#ifdef CONFIG_PCI
-extern int uli_exclude_device(struct pci_controller *hose,
- u_char bus, u_char devfn);
-
static struct device_node *pci_with_uli;
static int mpc85xx_exclude_device(struct pci_controller *hose,
@@ -13,6 +13,7 @@
#include <linux/of_irq.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
#define ULI_PIRQA 0x08
#define ULI_PIRQB 0x09
@@ -36,7 +37,7 @@
#define ULI_8259_IRQ14 0x0d
#define ULI_8259_IRQ15 0x0f
-u8 uli_pirq_to_irq[8] = {
+static u8 uli_pirq_to_irq[8] = {
ULI_8259_IRQ9, /* PIRQA */
ULI_8259_IRQ10, /* PIRQB */
ULI_8259_IRQ11, /* PIRQC */
@@ -341,8 +342,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
-int uli_exclude_device(struct pci_controller *hose,
- u_char bus, u_char devfn)
+int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
{
if (bus == (hose->first_busno + 2)) {
/* exclude Modem controller */
Use a single line for uli_exclude_device() Add uli_exclude_device() prototype in ppc-pci.h Remove that prototype from mpc85xx_ds.c Make uli_pirq_to_irq[] static as it is used only in that file. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- arch/powerpc/include/asm/ppc-pci.h | 2 ++ arch/powerpc/platforms/85xx/mpc85xx_ds.c | 4 +--- arch/powerpc/platforms/fsl_uli1575.c | 6 +++--- 3 files changed, 6 insertions(+), 6 deletions(-)