From patchwork Fri Apr 27 17:52:35 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 155562 Return-Path: X-Original-To: patchwork-incoming@ozlabs.org Delivered-To: patchwork-incoming@ozlabs.org Received: from ozlabs.org (localhost [IPv6:::1]) by ozlabs.org (Postfix) with ESMTP id 5D38FB7174 for ; Sat, 28 Apr 2012 03:55:36 +1000 (EST) Received: from mx1.redhat.com (mx1.redhat.com [209.132.183.28]) by ozlabs.org (Postfix) with ESMTP id 5D46EB6F9F for ; Sat, 28 Apr 2012 03:53:57 +1000 (EST) Received: from int-mx02.intmail.prod.int.phx2.redhat.com (int-mx02.intmail.prod.int.phx2.redhat.com [10.5.11.12]) by mx1.redhat.com (8.14.4/8.14.4) with ESMTP id q3RHqlnG025752 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK); Fri, 27 Apr 2012 13:52:47 -0400 Received: from [10.11.9.177] (vpn-9-177.rdu.redhat.com [10.11.9.177]) by int-mx02.intmail.prod.int.phx2.redhat.com (8.13.8/8.13.8) with ESMTP id q3RHqaDD024784 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 27 Apr 2012 13:52:37 -0400 Message-ID: <4F9ADCE3.2030506@redhat.com> Date: Fri, 27 Apr 2012 14:52:35 -0300 From: Mauro Carvalho Chehab User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:11.0) Gecko/20120329 Thunderbird/11.0.1 MIME-Version: 1.0 To: Borislav Petkov Subject: Re: [PATCH EDACv16 1/2] edac: Change internal representation to work with layers References: <1335289087-11337-1-git-send-email-mchehab@redhat.com> <1335291342-14922-1-git-send-email-mchehab@redhat.com> <20120427133304.GE9626@aftab.osrc.amd.com> In-Reply-To: <20120427133304.GE9626@aftab.osrc.amd.com> X-Enigmail-Version: 1.4 X-Scanned-By: MIMEDefang 2.67 on 10.5.11.12 Cc: Shaohui Xie , Jason Uhlenkott , Aristeu Rozanski , Hitoshi Mitake , Mark Gross , Dmitry Eremin-Solenikov , Ranganathan Desikan , Egor Martovetsky , =?ISO-8859-1?Q?Niklas_S=F6d?= =?ISO-8859-1?Q?erlund?= , Tim Small , "Arvind R." , Chris Metcalf , Olof Johansson , Doug Thompson , Linux Edac Mailing List , Michal Marek , Jiri Kosina , Linux Kernel Mailing List , Joe Perches , Andrew Morton , linuxppc-dev@lists.ozlabs.org X-BeenThere: linuxppc-dev@lists.ozlabs.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org Sender: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org Em 27-04-2012 10:33, Borislav Petkov escreveu: > Btw, > > this patch gives > > [ 8.278399] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 0: dimm0 (0:0:0): row 0, chan 0 > [ 8.287594] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 1: dimm1 (0:1:0): row 0, chan 1 > [ 8.296784] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 2: dimm2 (1:0:0): row 1, chan 0 > [ 8.305968] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 3: dimm3 (1:1:0): row 1, chan 1 > [ 8.315144] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 4: dimm4 (2:0:0): row 2, chan 0 > [ 8.324326] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 5: dimm5 (2:1:0): row 2, chan 1 > [ 8.333502] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 6: dimm6 (3:0:0): row 3, chan 0 > [ 8.342684] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 7: dimm7 (3:1:0): row 3, chan 1 > [ 8.351860] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 8: dimm8 (4:0:0): row 4, chan 0 > [ 8.361049] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 9: dimm9 (4:1:0): row 4, chan 1 > [ 8.370227] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 10: dimm10 (5:0:0): row 5, chan 0 > [ 8.379582] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 11: dimm11 (5:1:0): row 5, chan 1 > [ 8.388941] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 12: dimm12 (6:0:0): row 6, chan 0 > [ 8.398315] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 13: dimm13 (6:1:0): row 6, chan 1 > [ 8.407680] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 14: dimm14 (7:0:0): row 7, chan 0 > [ 8.417047] EDAC DEBUG: new_edac_mc_alloc: new_edac_mc_alloc: 15: dimm15 (7:1:0): row 7, chan 1 > > and the memory controller has the following chip selects > > [ 8.137662] EDAC MC: DCT0 chip selects: > [ 8.150291] EDAC amd64: MC: 0: 2048MB 1: 2048MB > [ 8.155349] EDAC amd64: MC: 2: 2048MB 3: 2048MB > [ 8.160408] EDAC amd64: MC: 4: 0MB 5: 0MB > [ 8.165475] EDAC amd64: MC: 6: 0MB 7: 0MB > [ 8.180499] EDAC MC: DCT1 chip selects: > [ 8.184693] EDAC amd64: MC: 0: 2048MB 1: 2048MB > [ 8.189753] EDAC amd64: MC: 2: 2048MB 3: 2048MB > [ 8.194812] EDAC amd64: MC: 4: 0MB 5: 0MB > [ 8.199875] EDAC amd64: MC: 6: 0MB 7: 0MB > > Those are 4 dual-ranked DIMMs on this node, DCT0 is one channel and DCT1 > is another and I have 4 ranks per channel. Having dimm0-dimm15 is very > misleading and has nothing to do with the reality. So, if this is to use > your nomenclature with layers, I'll have dimm0-dimm7 where each dimm is > a rank. > > Or, the most correct thing to do would be to have dimm0-dimm3, each > dual-ranked. > > So either tot_dimms is computed wrongly or there's a more serious error > somewhere. > > I've reviewed almost the half patch, will review the rest when/if we > sort out the above issue first. > > Thanks. > > On Tue, Apr 24, 2012 at 03:15:41PM -0300, Mauro Carvalho Chehab wrote: >> Change the EDAC internal representation to work with non-csrow >> based memory controllers. >> >> There are lots of those memory controllers nowadays, and more >> are coming. So, the EDAC internal representation needs to be >> changed, in order to work with those memory controllers, while >> preserving backward compatibility with the old ones. >> >> The edac core were written with the idea that memory controllers > > was > >> are able to directly access csrows, and that the channels are >> used inside a csrows select. > > This sounds funny, simply remove that second part about the channels. > >> This is not true for FB-DIMM and RAMBUS memory controllers. >> >> Also, some recent advanced memory controllers don't present a per-csrows >> view. Instead, they view memories as DIMM's, instead of ranks, accessed > > DIMMs instead of ranks." > > Remove the rest. > >> via csrow/channel. >> >> So, change the allocation and error report routines to allow >> them to work with all types of architectures. >> >> This will allow the removal of several hacks on FB-DIMM and RAMBUS > > with > >> memory controllers on the next patches. > > . Remove the rest. > >> >> Also, several tests were done on different platforms using different >> x86 drivers. >> >> TODO: a multi-rank DIMM's are currently represented by multiple DIMM > > Multi-rank DIMMs > >> entries at struct dimm_info. That means that changing a label for one > > in > >> rank won't change the same label for the other ranks at the same dimm. > > of the same DIMM. > >> Such bug is there since the beginning of the EDAC, so it is not a big > > This bug is present .. > >> deal. However, on several drivers, it is possible to fix this issue, but > > remove "on" > >> it should be a per-driver fix, as the csrow => DIMM arrangement may not >> be equal for all. So, don't try to fix it here yet. >> >> PS.: I tried to make this patch as short as possible, preceding it with > > Remove "PS." > >> several other patches that simplified the logic here. Yet, as the >> internal API changes, all drivers need changes. The changes are >> generally bigger on the drivers for FB-DIMM's. > > in for FB-DIMMs. > >> >> FIXME: while the FB-DIMMs are not converted to use the new >> design, uncorrected errors will show just one channel. In >> the past, all changes were on a big patch with about 150K. >> As it needed to be split, in order to be accepted by the >> EDAC ML at vger, we've opted to have this small drawback. >> As an advantage, it is now easier to review the patch series. > > This whole paragraph above doesn't have anything to do with what the > patch does, so it can go. > > [..] > >> --- >> >> v16: Only context changes >> >> drivers/edac/edac_core.h | 92 ++++++- >> drivers/edac/edac_mc.c | 682 ++++++++++++++++++++++++++++------------------ >> include/linux/edac.h | 40 ++- >> 3 files changed, 526 insertions(+), 288 deletions(-) >> >> diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h >> index e48ab31..7201bb1 100644 >> --- a/drivers/edac/edac_core.h >> +++ b/drivers/edac/edac_core.h >> @@ -447,8 +447,13 @@ static inline void pci_write_bits32(struct pci_dev *pdev, int offset, >> >> #endif /* CONFIG_PCI */ >> >> -extern struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, >> - unsigned nr_chans, int edac_index); >> +struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, >> + unsigned nr_chans, int edac_index); > > Why not "extern"? > >> +struct mem_ctl_info *new_edac_mc_alloc(unsigned edac_index, >> + unsigned n_layers, >> + struct edac_mc_layer *layers, >> + bool rev_order, >> + unsigned sz_pvt); > > ditto. > >> extern int edac_mc_add_mc(struct mem_ctl_info *mci); >> extern void edac_mc_free(struct mem_ctl_info *mci); >> extern struct mem_ctl_info *edac_mc_find(int idx); >> @@ -467,24 +472,80 @@ extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, >> * reporting logic and function interface - reduces conditional >> * statement clutter and extra function arguments. >> */ >> -extern void edac_mc_handle_ce(struct mem_ctl_info *mci, >> + >> +void edac_mc_handle_error(const enum hw_event_mc_err_type type, >> + struct mem_ctl_info *mci, >> + const unsigned long page_frame_number, >> + const unsigned long offset_in_page, >> + const unsigned long syndrome, >> + const int layer0, >> + const int layer1, >> + const int layer2, >> + const char *msg, >> + const char *other_detail, >> + const void *mcelog); > > Why isn't this one "extern" either? > >> + >> +static inline void edac_mc_handle_ce(struct mem_ctl_info *mci, >> unsigned long page_frame_number, >> unsigned long offset_in_page, >> unsigned long syndrome, int row, int channel, >> - const char *msg); > > Strange alignment, pls do > > static inline void edac_mc_handle_ce(struct..., > unsigned..., > ..., > ...); > > >> -extern void edac_mc_handle_ce_no_info(struct mem_ctl_info *mci, >> - const char *msg); >> -extern void edac_mc_handle_ue(struct mem_ctl_info *mci, >> + const char *msg) >> +{ >> + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, >> + page_frame_number, offset_in_page, syndrome, >> + row, channel, -1, msg, NULL, NULL); >> +} >> + >> +static inline void edac_mc_handle_ce_no_info(struct mem_ctl_info *mci, >> + const char *msg) > > ditto. > >> +{ >> + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, >> + 0, 0, 0, -1, -1, -1, msg, NULL, NULL); >> +} >> + >> +static inline void edac_mc_handle_ue(struct mem_ctl_info *mci, >> unsigned long page_frame_number, >> unsigned long offset_in_page, int row, >> - const char *msg); > > ditto. > >> -extern void edac_mc_handle_ue_no_info(struct mem_ctl_info *mci, >> - const char *msg); >> -extern void edac_mc_handle_fbd_ue(struct mem_ctl_info *mci, unsigned int csrow, >> - unsigned int channel0, unsigned int channel1, >> - char *msg); >> -extern void edac_mc_handle_fbd_ce(struct mem_ctl_info *mci, unsigned int csrow, >> - unsigned int channel, char *msg); >> + const char *msg) >> +{ >> + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, >> + page_frame_number, offset_in_page, 0, >> + row, -1, -1, msg, NULL, NULL); >> +} >> + >> +static inline void edac_mc_handle_ue_no_info(struct mem_ctl_info *mci, >> + const char *msg) >> +{ >> + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, >> + 0, 0, 0, -1, -1, -1, msg, NULL, NULL); >> +} >> + >> +static inline void edac_mc_handle_fbd_ue(struct mem_ctl_info *mci, >> + unsigned int csrow, >> + unsigned int channel0, >> + unsigned int channel1, >> + char *msg) > > Now this alignment looks correct. > >> +{ >> + /* >> + *FIXME: The error can also be at channel1 (e. g. at the second >> + * channel of the same branch). The fix is to push >> + * edac_mc_handle_error() call into each driver >> + */ >> + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, >> + 0, 0, 0, >> + csrow, channel0, -1, msg, NULL, NULL); >> +} >> + >> +static inline void edac_mc_handle_fbd_ce(struct mem_ctl_info *mci, >> + unsigned int csrow, >> + unsigned int channel, char *msg) >> +{ >> + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, >> + 0, 0, 0, >> + csrow, channel, -1, msg, NULL, NULL); >> +} >> + >> + > > Two superfluous newlines. Fixed all above (except for the "extern"). > >> >> /* >> * edac_device APIs >> @@ -496,6 +557,7 @@ extern void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev, >> extern void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev, >> int inst_nr, int block_nr, const char *msg); >> extern int edac_device_alloc_index(void); >> +extern const char *edac_layer_name[]; >> >> /* >> * edac_pci APIs >> diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c >> index 6ec967a..4d4d8b7 100644 >> --- a/drivers/edac/edac_mc.c >> +++ b/drivers/edac/edac_mc.c >> @@ -44,9 +44,25 @@ static void edac_mc_dump_channel(struct rank_info *chan) >> debugf4("\tchannel = %p\n", chan); >> debugf4("\tchannel->chan_idx = %d\n", chan->chan_idx); >> debugf4("\tchannel->csrow = %p\n\n", chan->csrow); >> - debugf4("\tdimm->ce_count = %d\n", chan->dimm->ce_count); >> - debugf4("\tdimm->label = '%s'\n", chan->dimm->label); >> - debugf4("\tdimm->nr_pages = 0x%x\n", chan->dimm->nr_pages); >> + debugf4("\tchannel->dimm = %p\n", chan->dimm); >> +} >> + >> +static void edac_mc_dump_dimm(struct dimm_info *dimm) >> +{ >> + int i; >> + >> + debugf4("\tdimm = %p\n", dimm); >> + debugf4("\tdimm->label = '%s'\n", dimm->label); >> + debugf4("\tdimm->nr_pages = 0x%x\n", dimm->nr_pages); >> + debugf4("\tdimm location "); >> + for (i = 0; i < dimm->mci->n_layers; i++) { >> + printk(KERN_CONT "%d", dimm->location[i]); >> + if (i < dimm->mci->n_layers - 1) >> + printk(KERN_CONT "."); >> + } >> + printk(KERN_CONT "\n"); > > This looks hacky but I don't have a good suggestion what to do instead > here. Maybe snprintf into a complete string which you can issue with > debugf4()... This is not hacky. There are several places at the Kernel doing loops like that. Look, for example, at lib/hexdump.c (without KERN_CONT, as this macro was added later - probably to avoid checkpatch.pl complains). >> + debugf4("\tdimm->grain = %d\n", dimm->grain); >> + debugf4("\tdimm->nr_pages = 0x%x\n", dimm->nr_pages); >> } >> >> static void edac_mc_dump_csrow(struct csrow_info *csrow) >> @@ -70,6 +86,8 @@ static void edac_mc_dump_mci(struct mem_ctl_info *mci) >> debugf4("\tmci->edac_check = %p\n", mci->edac_check); >> debugf3("\tmci->nr_csrows = %d, csrows = %p\n", >> mci->nr_csrows, mci->csrows); >> + debugf3("\tmci->nr_dimms = %d, dimns = %p\n", > > ->tot_dimms dimms Fixed. > >> + mci->tot_dimms, mci->dimms); >> debugf3("\tdev = %p\n", mci->dev); >> debugf3("\tmod_name:ctl_name = %s:%s\n", mci->mod_name, mci->ctl_name); >> debugf3("\tpvt_info = %p\n\n", mci->pvt_info); >> @@ -157,10 +175,25 @@ void *edac_align_ptr(void **p, unsigned size, int n_elems) >> } >> >> /** >> - * edac_mc_alloc: Allocate a struct mem_ctl_info structure >> - * @size_pvt: size of private storage needed >> - * @nr_csrows: Number of CWROWS needed for this MC >> - * @nr_chans: Number of channels for the MC >> + * edac_mc_alloc: Allocate and partially fills a struct mem_ctl_info structure > > fill > >> + * @edac_index: Memory controller number >> + * @n_layers: Number of layers at the MC hierarchy > > Number of MC hierarchy layers > >> + * layers: Describes each layer as seen by the Memory Controller >> + * @rev_order: Fills csrows/cs channels at the reverse order > > csrows/channels in reverse order > >> + * @size_pvt: size of private storage needed >> + * >> + * >> + * FIXME: drivers handle multi-rank memories on different ways: on some > > in in > >> + * drivers, one multi-rank memory is mapped as one DIMM, while, on others, > > memory stick in > >> + * a single multi-rank DIMM would be mapped into several "dimms". > > memory stick > >> + * >> + * Non-csrow based drivers (like FB-DIMM and RAMBUS ones) will likely report >> + * such DIMMS properly, but the CSROWS-based ones will likely do the wrong > > csrow-based > >> + * thing, as two chip select values are used for dual-rank memories (and 4, for >> + * quad-rank ones). I suspect that this issue could be solved inside the EDAC >> + * core for SDRAM memories, but it requires further study at JEDEC JESD 21C. >> + * >> + * In summary, solving this issue is not easy, as it requires a lot of testing. >> * >> * Everything is kmalloc'ed as one big chunk - more efficient. >> * Only can be used if all structures have the same lifetime - otherwise >> @@ -172,18 +205,41 @@ void *edac_align_ptr(void **p, unsigned size, int n_elems) >> * NULL allocation failed >> * struct mem_ctl_info pointer >> */ >> -struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, >> - unsigned nr_chans, int edac_index) >> +struct mem_ctl_info *new_edac_mc_alloc(unsigned edac_index, >> + unsigned n_layers, >> + struct edac_mc_layer *layers, >> + bool rev_order, >> + unsigned sz_pvt) > > strange function argument vertical alignment > >> { >> void *ptr = NULL; >> struct mem_ctl_info *mci; >> - struct csrow_info *csi, *csrow; >> + struct edac_mc_layer *lay; > > As before, call this "layers" pls. > >> + struct csrow_info *csi, *csr; >> struct rank_info *chi, *chp, *chan; >> struct dimm_info *dimm; >> + u32 *ce_per_layer[EDAC_MAX_LAYERS], *ue_per_layer[EDAC_MAX_LAYERS]; >> void *pvt; >> - unsigned size; >> - int row, chn; >> + unsigned size, tot_dimms, count, pos[EDAC_MAX_LAYERS]; >> + unsigned tot_csrows, tot_cschannels; > > No need to call this "tot_cschannels" - "tot_channels" should be enough. > >> + int i, j; >> int err; >> + int row, chn; > > All those local variables should be sorted in a reverse christmas tree > order: > > u32 this_is_the_longest_array_name[LENGTH]; > void *shorter_named_variable; > unsigned long size; > int i; > > ... Why? There's nothing at the CodingStyle saying about how the vars should be ordered. If you want to enforce some particular order, please do it yourself, but apply it consistently among the entire subsystem. > >> + >> + BUG_ON(n_layers > EDAC_MAX_LAYERS); > > > Push this BUG_ON up into edac_mc_alloc as the first thing this function > does. It is already the first thing at the function. > Also, is it valid to have n_layers == 0? The memcpy call below > will do nothing. Changed to: BUG_ON(n_layers > EDAC_MAX_LAYERS || n_layers == 0); >> + /* >> + * Calculate the total amount of dimms and csrows/cschannels while >> + * in the old API emulation mode >> + */ >> + tot_dimms = 1; >> + tot_cschannels = 1; >> + tot_csrows = 1; > > Those initializations can be done above at variable declaration time. Yes, but the compiled code will be the same anyway, as gcc will optimize it, either by using registers for those vars or by moving the initialization to the top of the function. This function is too complex, so it is better to initialize those vars just before the loops that are calculating those totals. > >> + for (i = 0; i < n_layers; i++) { >> + tot_dimms *= layers[i].size; >> + if (layers[i].is_virt_csrow) >> + tot_csrows *= layers[i].size; >> + else >> + tot_cschannels *= layers[i].size; >> + } >> >> /* Figure out the offsets of the various items from the start of an mc >> * structure. We want the alignment of each item to be at least as >> @@ -191,12 +247,21 @@ struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, >> * hardcode everything into a single struct. >> */ >> mci = edac_align_ptr(&ptr, sizeof(*mci), 1); >> - csi = edac_align_ptr(&ptr, sizeof(*csi), nr_csrows); >> - chi = edac_align_ptr(&ptr, sizeof(*chi), nr_csrows * nr_chans); >> - dimm = edac_align_ptr(&ptr, sizeof(*dimm), nr_csrows * nr_chans); >> + lay = edac_align_ptr(&ptr, sizeof(*lay), n_layers); >> + csi = edac_align_ptr(&ptr, sizeof(*csi), tot_csrows); >> + chi = edac_align_ptr(&ptr, sizeof(*chi), tot_csrows * tot_cschannels); >> + dimm = edac_align_ptr(&ptr, sizeof(*dimm), tot_dimms); >> + count = 1; > > ditto. >> + for (i = 0; i < n_layers; i++) { >> + tot_dimms *= layers[i].size; >> + if (layers[i].is_virt_csrow) >> + tot_csrows *= layers[i].size; >> + else >> + tot_cschannels *= layers[i].size; >> + } Ditto: let gcc optimize it. Spreading the 'count' match code will only make harder for a reviewer to actually see what's there. At assember, count will likely be optimized as a register anyway. Patches with all the fixes is enclosed. --- [PATCH EDACv17] edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski Cc: Doug Thompson Cc: Borislav Petkov Cc: Mark Gross Cc: Jason Uhlenkott Cc: Tim Small Cc: Ranganathan Desikan Cc: "Arvind R." Cc: Olof Johansson Cc: Egor Martovetsky Cc: Chris Metcalf Cc: Michal Marek Cc: Jiri Kosina Cc: Joe Perches Cc: Dmitry Eremin-Solenikov Cc: Benjamin Herrenschmidt Cc: Hitoshi Mitake Cc: Andrew Morton Cc: "Niklas Söderlund" Cc: Shaohui Xie Cc: Josh Boyer Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab --- v17: Several cosmetic changes. diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index e48ab31..b2dfdf5 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -447,8 +447,13 @@ static inline void pci_write_bits32(struct pci_dev *pdev, int offset, #endif /* CONFIG_PCI */ -extern struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, - unsigned nr_chans, int edac_index); +struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, + unsigned nr_chans, int edac_index); +struct mem_ctl_info *new_edac_mc_alloc(unsigned edac_index, + unsigned n_layers, + struct edac_mc_layer *layers, + bool rev_order, + unsigned sz_pvt); extern int edac_mc_add_mc(struct mem_ctl_info *mci); extern void edac_mc_free(struct mem_ctl_info *mci); extern struct mem_ctl_info *edac_mc_find(int idx); @@ -467,24 +472,78 @@ extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, * reporting logic and function interface - reduces conditional * statement clutter and extra function arguments. */ -extern void edac_mc_handle_ce(struct mem_ctl_info *mci, - unsigned long page_frame_number, - unsigned long offset_in_page, - unsigned long syndrome, int row, int channel, - const char *msg); -extern void edac_mc_handle_ce_no_info(struct mem_ctl_info *mci, - const char *msg); -extern void edac_mc_handle_ue(struct mem_ctl_info *mci, - unsigned long page_frame_number, - unsigned long offset_in_page, int row, - const char *msg); -extern void edac_mc_handle_ue_no_info(struct mem_ctl_info *mci, - const char *msg); -extern void edac_mc_handle_fbd_ue(struct mem_ctl_info *mci, unsigned int csrow, - unsigned int channel0, unsigned int channel1, - char *msg); -extern void edac_mc_handle_fbd_ce(struct mem_ctl_info *mci, unsigned int csrow, - unsigned int channel, char *msg); + +void edac_mc_handle_error(const enum hw_event_mc_err_type type, + struct mem_ctl_info *mci, + const unsigned long page_frame_number, + const unsigned long offset_in_page, + const unsigned long syndrome, + const int layer0, + const int layer1, + const int layer2, + const char *msg, + const char *other_detail, + const void *mcelog); + +static inline void edac_mc_handle_ce(struct mem_ctl_info *mci, + unsigned long page_frame_number, + unsigned long offset_in_page, + unsigned long syndrome, int row, int channel, + const char *msg) +{ + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, + page_frame_number, offset_in_page, syndrome, + row, channel, -1, msg, NULL, NULL); +} + +static inline void edac_mc_handle_ce_no_info(struct mem_ctl_info *mci, + const char *msg) +{ + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, + 0, 0, 0, -1, -1, -1, msg, NULL, NULL); +} + +static inline void edac_mc_handle_ue(struct mem_ctl_info *mci, + unsigned long page_frame_number, + unsigned long offset_in_page, int row, + const char *msg) +{ + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, + page_frame_number, offset_in_page, 0, + row, -1, -1, msg, NULL, NULL); +} + +static inline void edac_mc_handle_ue_no_info(struct mem_ctl_info *mci, + const char *msg) +{ + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, + 0, 0, 0, -1, -1, -1, msg, NULL, NULL); +} + +static inline void edac_mc_handle_fbd_ue(struct mem_ctl_info *mci, + unsigned int csrow, + unsigned int channel0, + unsigned int channel1, + char *msg) +{ + /* + *FIXME: The error can also be at channel1 (e. g. at the second + * channel of the same branch). The fix is to push + * edac_mc_handle_error() call into each driver + */ + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, + 0, 0, 0, + csrow, channel0, -1, msg, NULL, NULL); +} + +static inline void edac_mc_handle_fbd_ce(struct mem_ctl_info *mci, + unsigned int csrow, + unsigned int channel, char *msg) +{ + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, + 0, 0, 0, + csrow, channel, -1, msg, NULL, NULL); +} /* * edac_device APIs @@ -496,6 +555,7 @@ extern void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev, extern void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev, int inst_nr, int block_nr, const char *msg); extern int edac_device_alloc_index(void); +extern const char *edac_layer_name[]; /* * edac_pci APIs diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 6ec967a..a9f7650 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -44,9 +44,25 @@ static void edac_mc_dump_channel(struct rank_info *chan) debugf4("\tchannel = %p\n", chan); debugf4("\tchannel->chan_idx = %d\n", chan->chan_idx); debugf4("\tchannel->csrow = %p\n\n", chan->csrow); - debugf4("\tdimm->ce_count = %d\n", chan->dimm->ce_count); - debugf4("\tdimm->label = '%s'\n", chan->dimm->label); - debugf4("\tdimm->nr_pages = 0x%x\n", chan->dimm->nr_pages); + debugf4("\tchannel->dimm = %p\n", chan->dimm); +} + +static void edac_mc_dump_dimm(struct dimm_info *dimm) +{ + int i; + + debugf4("\tdimm = %p\n", dimm); + debugf4("\tdimm->label = '%s'\n", dimm->label); + debugf4("\tdimm->nr_pages = 0x%x\n", dimm->nr_pages); + debugf4("\tdimm location "); + for (i = 0; i < dimm->mci->n_layers; i++) { + printk(KERN_CONT "%d", dimm->location[i]); + if (i < dimm->mci->n_layers - 1) + printk(KERN_CONT "."); + } + printk(KERN_CONT "\n"); + debugf4("\tdimm->grain = %d\n", dimm->grain); + debugf4("\tdimm->nr_pages = 0x%x\n", dimm->nr_pages); } static void edac_mc_dump_csrow(struct csrow_info *csrow) @@ -70,6 +86,8 @@ static void edac_mc_dump_mci(struct mem_ctl_info *mci) debugf4("\tmci->edac_check = %p\n", mci->edac_check); debugf3("\tmci->nr_csrows = %d, csrows = %p\n", mci->nr_csrows, mci->csrows); + debugf3("\tmci->nr_dimms = %d, dimms = %p\n", + mci->tot_dimms, mci->dimms); debugf3("\tdev = %p\n", mci->dev); debugf3("\tmod_name:ctl_name = %s:%s\n", mci->mod_name, mci->ctl_name); debugf3("\tpvt_info = %p\n\n", mci->pvt_info); @@ -157,10 +175,21 @@ void *edac_align_ptr(void **p, unsigned size, int n_elems) } /** - * edac_mc_alloc: Allocate a struct mem_ctl_info structure - * @size_pvt: size of private storage needed - * @nr_csrows: Number of CWROWS needed for this MC - * @nr_chans: Number of channels for the MC + * edac_mc_alloc: Allocate and partially fill a struct mem_ctl_info structure + * @edac_index: Memory controller number + * @n_layers: Number of MC hierarchy layers + * layers: Describes each layer as seen by the Memory Controller + * @rev_order: Fills csrows/channels at the reverse order + * @size_pvt: size of private storage needed + * + * + * Non-csrow based drivers (like FB-DIMM and RAMBUS ones) will likely report + * such DIMMS properly, but the CSROWS-based ones will likely do the wrong + * thing, as two chip select values are used for dual-rank memories (and 4, for + * quad-rank ones). I suspect that this issue could be solved inside the EDAC + * core for SDRAM memories, but it requires further study at JEDEC JESD 21C. + * + * In summary, solving this issue is not easy, as it requires a lot of testing. * * Everything is kmalloc'ed as one big chunk - more efficient. * Only can be used if all structures have the same lifetime - otherwise @@ -168,22 +197,55 @@ void *edac_align_ptr(void **p, unsigned size, int n_elems) * * Use edac_mc_free() to free mc structures allocated by this function. * + * NOTE: drivers handle multi-rank memories in different ways: in some + * drivers, one multi-rank memory stick is mapped as one entry, while, in + * others, a single multi-rank memory stick would be mapped into several + * entries. Currently, this function will allocate multiple struct dimm_info + * on such scenarios, as grouping the multiple ranks require drivers change. + * * Returns: * NULL allocation failed * struct mem_ctl_info pointer */ -struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, - unsigned nr_chans, int edac_index) +struct mem_ctl_info *new_edac_mc_alloc(unsigned edac_index, + unsigned n_layers, + struct edac_mc_layer *layers, + bool rev_order, + unsigned sz_pvt) { void *ptr = NULL; struct mem_ctl_info *mci; - struct csrow_info *csi, *csrow; + struct edac_mc_layer *layer; + struct csrow_info *csi, *csr; struct rank_info *chi, *chp, *chan; struct dimm_info *dimm; + u32 *ce_per_layer[EDAC_MAX_LAYERS], *ue_per_layer[EDAC_MAX_LAYERS]; void *pvt; - unsigned size; - int row, chn; + unsigned size, tot_dimms, count, pos[EDAC_MAX_LAYERS]; + unsigned tot_csrows, tot_channels, tot_errcount = 0; + int i, j; int err; + int row, chn; + bool per_rank = false; + + BUG_ON(n_layers > EDAC_MAX_LAYERS); + /* + * Calculate the total amount of dimms and csrows/cschannels while + * in the old API emulation mode + */ + tot_dimms = 1; + tot_channels = 1; + tot_csrows = 1; + for (i = 0; i < n_layers; i++) { + tot_dimms *= layers[i].size; + if (layers[i].is_virt_csrow) + tot_csrows *= layers[i].size; + else + tot_channels *= layers[i].size; + + if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT) + per_rank = true; + } /* Figure out the offsets of the various items from the start of an mc * structure. We want the alignment of each item to be at least as @@ -191,12 +253,28 @@ struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, * hardcode everything into a single struct. */ mci = edac_align_ptr(&ptr, sizeof(*mci), 1); - csi = edac_align_ptr(&ptr, sizeof(*csi), nr_csrows); - chi = edac_align_ptr(&ptr, sizeof(*chi), nr_csrows * nr_chans); - dimm = edac_align_ptr(&ptr, sizeof(*dimm), nr_csrows * nr_chans); + layer = edac_align_ptr(&ptr, sizeof(*layer), n_layers); + csi = edac_align_ptr(&ptr, sizeof(*csi), tot_csrows); + chi = edac_align_ptr(&ptr, sizeof(*chi), tot_csrows * tot_channels); + dimm = edac_align_ptr(&ptr, sizeof(*dimm), tot_dimms); + count = 1; + for (i = 0; i < n_layers; i++) { + count *= layers[i].size; + debugf4("%s: errcount layer %d size %d\n", __func__, i, count); + ce_per_layer[i] = edac_align_ptr(&ptr, sizeof(u32), count); + ue_per_layer[i] = edac_align_ptr(&ptr, sizeof(u32), count); + tot_errcount += 2 * count; + } + + debugf4("%s: allocating %d error counters\n", __func__, tot_errcount); pvt = edac_align_ptr(&ptr, sz_pvt, 1); size = ((unsigned long)pvt) + sz_pvt; + debugf1("%s(): allocating %u bytes for mci data (%d %s, %d csrows/channels)\n", + __func__, size, + tot_dimms, + per_rank ? "ranks" : "dimms", + tot_csrows * tot_channels); mci = kzalloc(size, GFP_KERNEL); if (mci == NULL) return NULL; @@ -204,42 +282,101 @@ struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, /* Adjust pointers so they point within the memory we just allocated * rather than an imaginary chunk of memory located at address 0. */ + layer = (struct edac_mc_layer *)(((char *)mci) + ((unsigned long)layer)); csi = (struct csrow_info *)(((char *)mci) + ((unsigned long)csi)); chi = (struct rank_info *)(((char *)mci) + ((unsigned long)chi)); dimm = (struct dimm_info *)(((char *)mci) + ((unsigned long)dimm)); + for (i = 0; i < n_layers; i++) { + mci->ce_per_layer[i] = (u32 *)((char *)mci + ((unsigned long)ce_per_layer[i])); + mci->ue_per_layer[i] = (u32 *)((char *)mci + ((unsigned long)ue_per_layer[i])); + } pvt = sz_pvt ? (((char *)mci) + ((unsigned long)pvt)) : NULL; /* setup index and various internal pointers */ mci->mc_idx = edac_index; mci->csrows = csi; mci->dimms = dimm; + mci->tot_dimms = tot_dimms; mci->pvt_info = pvt; - mci->nr_csrows = nr_csrows; + mci->n_layers = n_layers; + mci->layers = layer; + memcpy(mci->layers, layers, sizeof(*layer) * n_layers); + mci->nr_csrows = tot_csrows; + mci->num_cschannel = tot_channels; + mci->mem_is_per_rank = per_rank; /* - * For now, assumes that a per-csrow arrangement for dimms. - * This will be latter changed. + * Fills the csrow struct */ - dimm = mci->dimms; - - for (row = 0; row < nr_csrows; row++) { - csrow = &csi[row]; - csrow->csrow_idx = row; - csrow->mci = mci; - csrow->nr_channels = nr_chans; - chp = &chi[row * nr_chans]; - csrow->channels = chp; - - for (chn = 0; chn < nr_chans; chn++) { + for (row = 0; row < tot_csrows; row++) { + csr = &csi[row]; + csr->csrow_idx = row; + csr->mci = mci; + csr->nr_channels = tot_channels; + chp = &chi[row * tot_channels]; + csr->channels = chp; + + for (chn = 0; chn < tot_channels; chn++) { chan = &chp[chn]; chan->chan_idx = chn; - chan->csrow = csrow; + chan->csrow = csr; + } + } - mci->csrows[row].channels[chn].dimm = dimm; - dimm->csrow = row; - dimm->csrow_channel = chn; - dimm++; - mci->nr_dimms++; + /* + * Fills the dimm struct + */ + memset(&pos, 0, sizeof(pos)); + row = 0; + chn = 0; + debugf4("%s: initializing %d %s\n", __func__, tot_dimms, + per_rank ? "ranks" : "dimms"); + for (i = 0; i < tot_dimms; i++) { + chan = &csi[row].channels[chn]; + dimm = EDAC_DIMM_PTR(layer, mci->dimms, n_layers, + pos[0], pos[1], pos[2]); + dimm->mci = mci; + + debugf2("%s: %d: %s%zd (%d:%d:%d): row %d, chan %d\n", __func__, + i, per_rank ? "rank" : "dimm", (dimm - mci->dimms), + pos[0], pos[1], pos[2], row, chn); + + /* Copy DIMM location */ + for (j = 0; j < n_layers; j++) + dimm->location[j] = pos[j]; + + /* Link it to the csrows old API data */ + chan->dimm = dimm; + dimm->csrow = row; + dimm->cschannel = chn; + + /* Increment csrow location */ + if (!rev_order) { + for (j = n_layers - 1; j >= 0; j--) + if (!layers[j].is_virt_csrow) + break; + chn++; + if (chn == tot_channels) { + chn = 0; + row++; + } + } else { + for (j = n_layers - 1; j >= 0; j--) + if (layers[j].is_virt_csrow) + break; + row++; + if (row == tot_csrows) { + row = 0; + chn++; + } + } + + /* Increment dimm location */ + for (j = n_layers - 1; j >= 0; j--) { + pos[j]++; + if (pos[j] < layers[j].size) + break; + pos[j] = 0; } } @@ -263,6 +400,57 @@ struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, */ return mci; } +EXPORT_SYMBOL_GPL(new_edac_mc_alloc); + +/** + * edac_mc_alloc: Allocate and partially fills a struct mem_ctl_info structure + * @edac_index: Memory controller number + * @n_layers: Nu +mber of layers at the MC hierarchy + * layers: Describes each layer as seen by the Memory Controller + * @rev_order: Fills csrows/cs channels at the reverse order + * @size_pvt: size of private storage needed + * + * + * FIXME: drivers handle multi-rank memories on different ways: on some + * drivers, one multi-rank memory is mapped as one DIMM, while, on others, + * a single multi-rank DIMM would be mapped into several "dimms". + * + * Non-csrow based drivers (like FB-DIMM and RAMBUS ones) will likely report + * such DIMMS properly, but the csrow-based ones will likely do the wrong + * thing, as two chip select values are used for dual-rank memories (and 4, for + * quad-rank ones). I suspect that this issue could be solved inside the EDAC + * core for SDRAM memories, but it requires further study at JEDEC JESD 21C. + * + * In summary, solving this issue is not easy, as it requires a lot of testing. + * + * Everything is kmalloc'ed as one big chunk - more efficient. + * Only can be used if all structures have the same lifetime - otherwise + * you have to allocate and initialize your own structures. + * + * Use edac_mc_free() to free mc structures allocated by this function. + * + * Returns: + * NULL allocation failed + * struct mem_ctl_info pointer + */ + +struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, + unsigned nr_chans, int edac_index) +{ + unsigned n_layers = 2; + struct edac_mc_layer layers[n_layers]; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = nr_csrows; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = nr_chans; + layers[1].is_virt_csrow = false; + + return new_edac_mc_alloc(edac_index, ARRAY_SIZE(layers), layers, + false, sz_pvt); +} EXPORT_SYMBOL_GPL(edac_mc_alloc); /** @@ -528,7 +716,6 @@ EXPORT_SYMBOL(edac_mc_find); * edac_mc_add_mc: Insert the 'mci' structure into the mci global list and * create sysfs entries associated with mci structure * @mci: pointer to the mci structure to be added to the list - * @mc_idx: A unique numeric identifier to be assigned to the 'mci' structure. * * Return: * 0 Success @@ -555,6 +742,8 @@ int edac_mc_add_mc(struct mem_ctl_info *mci) edac_mc_dump_channel(&mci->csrows[i]. channels[j]); } + for (i = 0; i < mci->tot_dimms; i++) + edac_mc_dump_dimm(&mci->dimms[i]); } #endif mutex_lock(&mem_ctls_mutex); @@ -712,261 +901,251 @@ int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, unsigned long page) } EXPORT_SYMBOL_GPL(edac_mc_find_csrow_by_page); -/* FIXME - setable log (warning/emerg) levels */ -/* FIXME - integrate with evlog: http://evlog.sourceforge.net/ */ -void edac_mc_handle_ce(struct mem_ctl_info *mci, - unsigned long page_frame_number, - unsigned long offset_in_page, unsigned long syndrome, - int row, int channel, const char *msg) +const char *edac_layer_name[] = { + [EDAC_MC_LAYER_BRANCH] = "branch", + [EDAC_MC_LAYER_CHANNEL] = "channel", + [EDAC_MC_LAYER_SLOT] = "slot", + [EDAC_MC_LAYER_CHIP_SELECT] = "csrow", +}; +EXPORT_SYMBOL_GPL(edac_layer_name); + +static void edac_increment_ce_error(struct mem_ctl_info *mci, + bool enable_filter, + unsigned pos[EDAC_MAX_LAYERS]) { - unsigned long remapped_page; - char *label = NULL; - u32 grain; + int i, index = 0; - debugf3("MC%d: %s()\n", mci->mc_idx, __func__); + mci->ce_mc++; - /* FIXME - maybe make panic on INTERNAL ERROR an option */ - if (row >= mci->nr_csrows || row < 0) { - /* something is wrong */ - edac_mc_printk(mci, KERN_ERR, - "INTERNAL ERROR: row out of range " - "(%d >= %d)\n", row, mci->nr_csrows); - edac_mc_handle_ce_no_info(mci, "INTERNAL ERROR"); + if (!enable_filter) { + mci->ce_noinfo_count++; return; } - if (channel >= mci->csrows[row].nr_channels || channel < 0) { - /* something is wrong */ - edac_mc_printk(mci, KERN_ERR, - "INTERNAL ERROR: channel out of range " - "(%d >= %d)\n", channel, - mci->csrows[row].nr_channels); - edac_mc_handle_ce_no_info(mci, "INTERNAL ERROR"); - return; - } - - label = mci->csrows[row].channels[channel].dimm->label; - grain = mci->csrows[row].channels[channel].dimm->grain; + for (i = 0; i < mci->n_layers; i++) { + if (pos[i] < 0) + break; + index += pos[i]; + mci->ce_per_layer[i][index]++; - if (edac_mc_get_log_ce()) - /* FIXME - put in DIMM location */ - edac_mc_printk(mci, KERN_WARNING, - "CE page 0x%lx, offset 0x%lx, grain %d, syndrome " - "0x%lx, row %d, channel %d, label \"%s\": %s\n", - page_frame_number, offset_in_page, - grain, syndrome, row, channel, - label, msg); + if (i < mci->n_layers - 1) + index *= mci->layers[i + 1].size; + } +} - mci->ce_count++; - mci->csrows[row].ce_count++; - mci->csrows[row].channels[channel].dimm->ce_count++; - mci->csrows[row].channels[channel].ce_count++; +static void edac_increment_ue_error(struct mem_ctl_info *mci, + bool enable_filter, + unsigned pos[EDAC_MAX_LAYERS]) +{ + int i, index = 0; - if (mci->scrub_mode & SCRUB_SW_SRC) { - /* - * Some MC's can remap memory so that it is still available - * at a different address when PCI devices map into memory. - * MC's that can't do this lose the memory where PCI devices - * are mapped. This mapping is MC dependent and so we call - * back into the MC driver for it to map the MC page to - * a physical (CPU) page which can then be mapped to a virtual - * page - which can then be scrubbed. - */ - remapped_page = mci->ctl_page_to_phys ? - mci->ctl_page_to_phys(mci, page_frame_number) : - page_frame_number; + mci->ue_mc++; - edac_mc_scrub_block(remapped_page, offset_in_page, grain); + if (!enable_filter) { + mci->ce_noinfo_count++; + return; } -} -EXPORT_SYMBOL_GPL(edac_mc_handle_ce); -void edac_mc_handle_ce_no_info(struct mem_ctl_info *mci, const char *msg) -{ - if (edac_mc_get_log_ce()) - edac_mc_printk(mci, KERN_WARNING, - "CE - no information available: %s\n", msg); + for (i = 0; i < mci->n_layers; i++) { + if (pos[i] < 0) + break; + index += pos[i]; + mci->ue_per_layer[i][index]++; - mci->ce_noinfo_count++; - mci->ce_count++; + if (i < mci->n_layers - 1) + index *= mci->layers[i + 1].size; + } } -EXPORT_SYMBOL_GPL(edac_mc_handle_ce_no_info); -void edac_mc_handle_ue(struct mem_ctl_info *mci, - unsigned long page_frame_number, - unsigned long offset_in_page, int row, const char *msg) +#define OTHER_LABEL " or " +void edac_mc_handle_error(const enum hw_event_mc_err_type type, + struct mem_ctl_info *mci, + const unsigned long page_frame_number, + const unsigned long offset_in_page, + const unsigned long syndrome, + const int layer0, + const int layer1, + const int layer2, + const char *msg, + const char *other_detail, + const void *mcelog) { - int len = EDAC_MC_LABEL_LEN * 4; - char labels[len + 1]; - char *pos = labels; - int chan; - int chars; - char *label = NULL; + unsigned long remapped_page; + /* FIXME: too much for stack: move it to some pre-alocated area */ + char detail[80], location[80]; + char label[(EDAC_MC_LABEL_LEN + 1 + sizeof(OTHER_LABEL)) * mci->tot_dimms]; + char *p; + int row = -1, chan = -1; + int pos[EDAC_MAX_LAYERS] = { layer0, layer1, layer2 }; + int i; u32 grain; + bool enable_filter = false; debugf3("MC%d: %s()\n", mci->mc_idx, __func__); - /* FIXME - maybe make panic on INTERNAL ERROR an option */ - if (row >= mci->nr_csrows || row < 0) { - /* something is wrong */ - edac_mc_printk(mci, KERN_ERR, - "INTERNAL ERROR: row out of range " - "(%d >= %d)\n", row, mci->nr_csrows); - edac_mc_handle_ue_no_info(mci, "INTERNAL ERROR"); - return; - } - - grain = mci->csrows[row].channels[0].dimm->grain; - label = mci->csrows[row].channels[0].dimm->label; - chars = snprintf(pos, len + 1, "%s", label); - len -= chars; - pos += chars; - - for (chan = 1; (chan < mci->csrows[row].nr_channels) && (len > 0); - chan++) { - label = mci->csrows[row].channels[chan].dimm->label; - chars = snprintf(pos, len + 1, ":%s", label); - len -= chars; - pos += chars; + /* Check if the event report is consistent */ + for (i = 0; i < mci->n_layers; i++) { + if (pos[i] >= (int)mci->layers[i].size) { + if (type == HW_EVENT_ERR_CORRECTED) { + p = "CE"; + mci->ce_mc++; + } else { + p = "UE"; + mci->ue_mc++; + } + edac_mc_printk(mci, KERN_ERR, + "INTERNAL ERROR: %s value is out of range (%d >= %d)\n", + edac_layer_name[mci->layers[i].type], + pos[i], mci->layers[i].size); + /* + * Instead of just returning it, let's use what's + * known about the error. The increment routines and + * the DIMM filter logic will do the right thing by + * pointing the likely damaged DIMMs. + */ + pos[i] = -1; + } + if (pos[i] >= 0) + enable_filter = true; } - if (edac_mc_get_log_ue()) - edac_mc_printk(mci, KERN_EMERG, - "UE page 0x%lx, offset 0x%lx, grain %d, row %d, " - "labels \"%s\": %s\n", page_frame_number, - offset_in_page, grain, row, labels, msg); - - if (edac_mc_get_panic_on_ue()) - panic("EDAC MC%d: UE page 0x%lx, offset 0x%lx, grain %d, " - "row %d, labels \"%s\": %s\n", mci->mc_idx, - page_frame_number, offset_in_page, - grain, row, labels, msg); - - mci->ue_count++; - mci->csrows[row].ue_count++; -} -EXPORT_SYMBOL_GPL(edac_mc_handle_ue); + /* + * Get the dimm label/grain that applies to the match criteria. + * As the error algorithm may not be able to point to just one memory, + * the logic here will get all possible labels that could pottentially + * be affected by the error. + * On FB-DIMM memory controllers, for uncorrected errors, it is common + * to have only the MC channel and the MC dimm (also called as "rank") + * but the channel is not known, as the memory is arranged in pairs, + * where each memory belongs to a separate channel within the same + * branch. + * It will also get the max grain, over the error match range + */ + grain = 0; + p = label; + *p = '\0'; + for (i = 0; i < mci->tot_dimms; i++) { + struct dimm_info *dimm = &mci->dimms[i]; -void edac_mc_handle_ue_no_info(struct mem_ctl_info *mci, const char *msg) -{ - if (edac_mc_get_panic_on_ue()) - panic("EDAC MC%d: Uncorrected Error", mci->mc_idx); + if (layer0 >= 0 && layer0 != dimm->location[0]) + continue; + if (layer1 >= 0 && layer1 != dimm->location[1]) + continue; + if (layer2 >= 0 && layer2 != dimm->location[2]) + continue; - if (edac_mc_get_log_ue()) - edac_mc_printk(mci, KERN_WARNING, - "UE - no information available: %s\n", msg); - mci->ue_noinfo_count++; - mci->ue_count++; -} -EXPORT_SYMBOL_GPL(edac_mc_handle_ue_no_info); + if (dimm->grain > grain) + grain = dimm->grain; -/************************************************************* - * On Fully Buffered DIMM modules, this help function is - * called to process UE events - */ -void edac_mc_handle_fbd_ue(struct mem_ctl_info *mci, - unsigned int csrow, - unsigned int channela, - unsigned int channelb, char *msg) -{ - int len = EDAC_MC_LABEL_LEN * 4; - char labels[len + 1]; - char *pos = labels; - int chars; - char *label; - - if (csrow >= mci->nr_csrows) { - /* something is wrong */ - edac_mc_printk(mci, KERN_ERR, - "INTERNAL ERROR: row out of range (%d >= %d)\n", - csrow, mci->nr_csrows); - edac_mc_handle_ue_no_info(mci, "INTERNAL ERROR"); - return; + /* + * If the error is memory-controller wide, there's no sense + * on seeking for the affected DIMMs, as everything may be + * affected. Also, don't show errors for non-filled dimm's. + */ + if (enable_filter && dimm->nr_pages) { + if (p != label) { + strcpy(p, OTHER_LABEL); + p += strlen(OTHER_LABEL); + } + strcpy(p, dimm->label); + p += strlen(p); + *p = '\0'; + + /* + * get csrow/channel of the dimm, in order to allow + * incrementing the compat API counters + */ + debugf4("%s: %s csrows map: (%d,%d)\n", + __func__, + mci->mem_is_per_rank ? "rank" : "dimm", + dimm->csrow, dimm->cschannel); + if (row == -1) + row = dimm->csrow; + else if (row >= 0 && row != dimm->csrow) + row = -2; + if (chan == -1) + chan = dimm->cschannel; + else if (chan >= 0 && chan != dimm->cschannel) + chan = -2; + } } - - if (channela >= mci->csrows[csrow].nr_channels) { - /* something is wrong */ - edac_mc_printk(mci, KERN_ERR, - "INTERNAL ERROR: channel-a out of range " - "(%d >= %d)\n", - channela, mci->csrows[csrow].nr_channels); - edac_mc_handle_ue_no_info(mci, "INTERNAL ERROR"); - return; + if (!enable_filter) { + strcpy(label, "any memory"); + } else { + debugf4("%s: csrow/channel to increment: (%d,%d)\n", + __func__, row, chan); + if (p == label) + strcpy(label, "unknown memory"); + if (type == HW_EVENT_ERR_CORRECTED) { + if (row >= 0) { + mci->csrows[row].ce_count++; + if (chan >= 0) + mci->csrows[row].channels[chan].ce_count++; + } + } else + if (row >= 0) + mci->csrows[row].ue_count++; } - if (channelb >= mci->csrows[csrow].nr_channels) { - /* something is wrong */ - edac_mc_printk(mci, KERN_ERR, - "INTERNAL ERROR: channel-b out of range " - "(%d >= %d)\n", - channelb, mci->csrows[csrow].nr_channels); - edac_mc_handle_ue_no_info(mci, "INTERNAL ERROR"); - return; + /* Fill the RAM location data */ + p = location; + for (i = 0; i < mci->n_layers; i++) { + if (pos[i] < 0) + continue; + p += sprintf(p, "%s %d ", + edac_layer_name[mci->layers[i].type], + pos[i]); } - mci->ue_count++; - mci->csrows[csrow].ue_count++; - - /* Generate the DIMM labels from the specified channels */ - label = mci->csrows[csrow].channels[channela].dimm->label; - chars = snprintf(pos, len + 1, "%s", label); - len -= chars; - pos += chars; - - chars = snprintf(pos, len + 1, "-%s", - mci->csrows[csrow].channels[channelb].dimm->label); - - if (edac_mc_get_log_ue()) - edac_mc_printk(mci, KERN_EMERG, - "UE row %d, channel-a= %d channel-b= %d " - "labels \"%s\": %s\n", csrow, channela, channelb, - labels, msg); - - if (edac_mc_get_panic_on_ue()) - panic("UE row %d, channel-a= %d channel-b= %d " - "labels \"%s\": %s\n", csrow, channela, - channelb, labels, msg); -} -EXPORT_SYMBOL(edac_mc_handle_fbd_ue); + /* Memory type dependent details about the error */ + if (type == HW_EVENT_ERR_CORRECTED) + snprintf(detail, sizeof(detail), + "page 0x%lx offset 0x%lx grain %d syndrome 0x%lx", + page_frame_number, offset_in_page, + grain, syndrome); + else + snprintf(detail, sizeof(detail), + "page 0x%lx offset 0x%lx grain %d", + page_frame_number, offset_in_page, grain); + + if (type == HW_EVENT_ERR_CORRECTED) { + if (edac_mc_get_log_ce()) + edac_mc_printk(mci, KERN_WARNING, + "CE %s on %s (%s%s %s)\n", + msg, label, location, + detail, other_detail); + edac_increment_ce_error(mci, enable_filter, pos); + + if (mci->scrub_mode & SCRUB_SW_SRC) { + /* + * Some MC's can remap memory so that it is still + * available at a different address when PCI devices + * map into memory. + * MC's that can't do this lose the memory where PCI + * devices are mapped. This mapping is MC dependent + * and so we call back into the MC driver for it to + * map the MC page to a physical (CPU) page which can + * then be mapped to a virtual page - which can then + * be scrubbed. + */ + remapped_page = mci->ctl_page_to_phys ? + mci->ctl_page_to_phys(mci, page_frame_number) : + page_frame_number; + + edac_mc_scrub_block(remapped_page, + offset_in_page, grain); + } + } else { + if (edac_mc_get_log_ue()) + edac_mc_printk(mci, KERN_WARNING, + "UE %s on %s (%s%s %s)\n", + msg, label, location, detail, other_detail); -/************************************************************* - * On Fully Buffered DIMM modules, this help function is - * called to process CE events - */ -void edac_mc_handle_fbd_ce(struct mem_ctl_info *mci, - unsigned int csrow, unsigned int channel, char *msg) -{ - char *label = NULL; + if (edac_mc_get_panic_on_ue()) + panic("UE %s on %s (%s%s %s)\n", + msg, label, location, detail, other_detail); - /* Ensure boundary values */ - if (csrow >= mci->nr_csrows) { - /* something is wrong */ - edac_mc_printk(mci, KERN_ERR, - "INTERNAL ERROR: row out of range (%d >= %d)\n", - csrow, mci->nr_csrows); - edac_mc_handle_ce_no_info(mci, "INTERNAL ERROR"); - return; + edac_increment_ue_error(mci, enable_filter, pos); } - if (channel >= mci->csrows[csrow].nr_channels) { - /* something is wrong */ - edac_mc_printk(mci, KERN_ERR, - "INTERNAL ERROR: channel out of range (%d >= %d)\n", - channel, mci->csrows[csrow].nr_channels); - edac_mc_handle_ce_no_info(mci, "INTERNAL ERROR"); - return; - } - - label = mci->csrows[csrow].channels[channel].dimm->label; - - if (edac_mc_get_log_ce()) - /* FIXME - put in DIMM location */ - edac_mc_printk(mci, KERN_WARNING, - "CE row %d, channel %d, label \"%s\": %s\n", - csrow, channel, label, msg); - - mci->ce_count++; - mci->csrows[csrow].ce_count++; - mci->csrows[csrow].channels[channel].dimm->ce_count++; - mci->csrows[csrow].channels[channel].ce_count++; } -EXPORT_SYMBOL(edac_mc_handle_fbd_ce); +EXPORT_SYMBOL_GPL(edac_mc_handle_error); diff --git a/include/linux/edac.h b/include/linux/edac.h index 3b8798d..2b66109 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -412,18 +412,20 @@ struct edac_mc_layer { /* FIXME: add the proper per-location error counts */ struct dimm_info { char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */ - unsigned memory_controller; - unsigned csrow; - unsigned csrow_channel; + + /* Memory location data */ + unsigned location[EDAC_MAX_LAYERS]; + + struct mem_ctl_info *mci; /* the parent */ u32 grain; /* granularity of reported error in bytes */ enum dev_type dtype; /* memory device type */ enum mem_type mtype; /* memory dimm type */ enum edac_type edac_mode; /* EDAC mode for this dimm */ - u32 nr_pages; /* number of pages in csrow */ + u32 nr_pages; /* number of pages on this dimm */ - u32 ce_count; /* Correctable Errors for this dimm */ + unsigned csrow, cschannel; /* Points to the old API data */ }; /** @@ -443,9 +445,10 @@ struct dimm_info { */ struct rank_info { int chan_idx; - u32 ce_count; struct csrow_info *csrow; struct dimm_info *dimm; + + u32 ce_count; /* Correctable Errors for this csrow */ }; struct csrow_info { @@ -497,6 +500,11 @@ struct mcidev_sysfs_attribute { ssize_t (*store)(struct mem_ctl_info *, const char *,size_t); }; +struct edac_hierarchy { + char *name; + unsigned nr; +}; + /* MEMORY controller information structure */ struct mem_ctl_info { @@ -541,13 +549,18 @@ struct mem_ctl_info { unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci, unsigned long page); int mc_idx; - int nr_csrows; struct csrow_info *csrows; + unsigned nr_csrows, num_cschannel; + + /* Memory Controller hierarchy */ + unsigned n_layers; + struct edac_mc_layer *layers; + bool mem_is_per_rank; /* * DIMM info. Will eventually remove the entire csrows_info some day */ - unsigned nr_dimms; + unsigned tot_dimms; struct dimm_info *dimms; /* @@ -562,12 +575,15 @@ struct mem_ctl_info { const char *dev_name; char proc_name[MC_PROC_NAME_MAX_LEN + 1]; void *pvt_info; - u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */ - u32 ce_noinfo_count; /* Correctable Errors w/o info */ - u32 ue_count; /* Total Uncorrectable Errors for this MC */ - u32 ce_count; /* Total Correctable Errors for this MC */ + u32 ue_count; /* Total Uncorrectable Errors for this MC */ + u32 ce_count; /* Total Correctable Errors for this MC */ unsigned long start_time; /* mci load start time (in jiffies) */ + /* drivers shouldn't access this struct directly */ + unsigned ce_noinfo_count, ue_noinfo_count; + unsigned ce_mc, ue_mc; + u32 *ce_per_layer[EDAC_MAX_LAYERS], *ue_per_layer[EDAC_MAX_LAYERS]; + struct completion complete; /* edac sysfs device control */ @@ -580,7 +596,7 @@ struct mem_ctl_info { * by the low level driver. * * Set by the low level driver to provide attributes at the - * controller level, same level as 'ue_count' and 'ce_count' above. + * controller level. * An array of structures, NULL terminated * * If attributes are desired, then set to array of attributes