Message ID | 490950AF.1000303@unicontrol.de (mailing list archive) |
---|---|
State | Changes Requested, archived |
Headers | show |
On Thu, Oct 30, 2008 at 12:14 AM, René Bürgel <r.buergel@unicontrol.de> wrote: > Hi! This patch adds the capability to the mpc52xx-uart to report framing > errors, parity errors, breaks and overruns to userspace. These values may be > requested in userspace by using the ioctl TIOCGICOUNT. > > Signed-off-by: René Bürgel <r.buergel@unicontrol.de> Looks mostly good. A few comments below. Make sure you CC: me when you send the next version (which goes for all 5xxx patches). g. > > Kind regards, René Bürgel > > -- > René Bürgel > Software Engineer > Unicontrol Systemtechnik GmbH > OT Dittersbach > Sachsenburger Weg 34 > 09669 Frankenberg > > Tel.: 03 72 06/ 88 73 - 19 > Fax: 03 72 06/ 88 73 - 60 > E-Mail: r.buergel@unicontrol.de > Internet: www.unicontrol.de > > > > --- drivers/serial/mpc52xx_uart.c 2008-08-07 15:55:43.000000000 +0200 > +++ drivers/serial/mpc52xx_uart_orig.c 2008-09-11 13:19:12.000000000 +0200 Patch is one level too shallow; for regular tools to work without manual intervention you should be generating the patch from the directory above the kernel source. > @@ -752,10 +752,17 @@ > if (status & MPC52xx_PSC_SR_RB) { > flag = TTY_BREAK; > uart_handle_break(port); > + port->icount.brk++; > } else if (status & MPC52xx_PSC_SR_PE) > + { Please use '} else if () {' form > flag = TTY_PARITY; > + port->icount.parity++; > + } > else if (status & MPC52xx_PSC_SR_FE) > + { ditto > flag = TTY_FRAME; > + port->icount.frame++; > + } > > /* Clear error condition */ > out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT); > @@ -769,6 +776,7 @@ > * affect the current character > */ > tty_insert_flip_char(tty, 0, TTY_OVERRUN); > + port->icount.overrun++; > } > } > > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev >
--- drivers/serial/mpc52xx_uart.c 2008-08-07 15:55:43.000000000 +0200 +++ drivers/serial/mpc52xx_uart_orig.c 2008-09-11 13:19:12.000000000 +0200 @@ -752,10 +752,17 @@ if (status & MPC52xx_PSC_SR_RB) { flag = TTY_BREAK; uart_handle_break(port); + port->icount.brk++; } else if (status & MPC52xx_PSC_SR_PE) + { flag = TTY_PARITY; + port->icount.parity++; + } else if (status & MPC52xx_PSC_SR_FE) + { flag = TTY_FRAME; + port->icount.frame++; + } /* Clear error condition */ out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT); @@ -769,6 +776,7 @@ * affect the current character */ tty_insert_flip_char(tty, 0, TTY_OVERRUN); + port->icount.overrun++; } }
Hi! This patch adds the capability to the mpc52xx-uart to report framing errors, parity errors, breaks and overruns to userspace. These values may be requested in userspace by using the ioctl TIOCGICOUNT. Signed-off-by: René Bürgel <r.buergel@unicontrol.de> Kind regards, René Bürgel