| Message ID | 20231129214412.327633-4-Frank.Li@nxp.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | dwc general suspend/resume functionality | expand |
On Wed, Nov 29, 2023 at 04:44:11PM -0500, Frank Li wrote: > 'pf' and 'lut' is just difference name in difference chips, but basic it is > a MMIO base address plus an offset. > > Rename it to avoid duplicate pf_* and lut_* in driver. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Can you fix the name in pci-layerscape-ep.c also? - Mani > --- > > Notes: > pf_lut is better than pf_* or lut* because some chip use 'pf', some chip > use 'lut'. > > change from v1 to v4 > - new patch at v3 > > drivers/pci/controller/dwc/pci-layerscape.c | 34 ++++++++++----------- > 1 file changed, 17 insertions(+), 17 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c > index 42bca2c3b5c3e..590e07bb27002 100644 > --- a/drivers/pci/controller/dwc/pci-layerscape.c > +++ b/drivers/pci/controller/dwc/pci-layerscape.c > @@ -44,7 +44,7 @@ > #define PCIE_IATU_NUM 6 > > struct ls_pcie_drvdata { > - const u32 pf_off; > + const u32 pf_lut_off; > const struct dw_pcie_host_ops *ops; > int (*exit_from_l2)(struct dw_pcie_rp *pp); > bool scfg_support; > @@ -54,13 +54,13 @@ struct ls_pcie_drvdata { > struct ls_pcie { > struct dw_pcie *pci; > const struct ls_pcie_drvdata *drvdata; > - void __iomem *pf_base; > + void __iomem *pf_lut_base; > struct regmap *scfg; > int index; > bool big_endian; > }; > > -#define ls_pcie_pf_readl_addr(addr) ls_pcie_pf_readl(pcie, addr) > +#define ls_pcie_pf_lut_readl_addr(addr) ls_pcie_pf_lut_readl(pcie, addr) > #define to_ls_pcie(x) dev_get_drvdata((x)->dev) > > static bool ls_pcie_is_bridge(struct ls_pcie *pcie) > @@ -101,20 +101,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie) > iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR); > } > > -static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off) > +static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off) > { > if (pcie->big_endian) > - return ioread32be(pcie->pf_base + off); > + return ioread32be(pcie->pf_lut_base + off); > > - return ioread32(pcie->pf_base + off); > + return ioread32(pcie->pf_lut_base + off); > } > > -static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val) > +static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val) > { > if (pcie->big_endian) > - iowrite32be(val, pcie->pf_base + off); > + iowrite32be(val, pcie->pf_lut_base + off); > else > - iowrite32(val, pcie->pf_base + off); > + iowrite32(val, pcie->pf_lut_base + off); > } > > static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp) > @@ -124,11 +124,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp) > u32 val; > int ret; > > - val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR); > + val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR); > val |= PF_MCR_PTOMR; > - ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val); > + ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val); > > - ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR, > + ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR, > val, !(val & PF_MCR_PTOMR), > PCIE_PME_TO_L2_TIMEOUT_US/10, > PCIE_PME_TO_L2_TIMEOUT_US); > @@ -147,15 +147,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp) > * Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link > * to exit L2 state. > */ > - val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR); > + val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR); > val |= PF_MCR_EXL2S; > - ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val); > + ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val); > > /* > * L2 exit timeout of 10ms is not defined in the specifications, > * it was chosen based on empirical observations. > */ > - ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR, > + ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR, > val, !(val & PF_MCR_EXL2S), > 1000, > 10000); > @@ -243,7 +243,7 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = { > }; > > static const struct ls_pcie_drvdata layerscape_drvdata = { > - .pf_off = 0xc0000, > + .pf_lut_off = 0xc0000, > .pm_support = true, > .exit_from_l2 = ls_pcie_exit_from_l2, > }; > @@ -293,7 +293,7 @@ static int ls_pcie_probe(struct platform_device *pdev) > > pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian"); > > - pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off; > + pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off; > > if (pcie->drvdata->scfg_support) { > pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg"); > -- > 2.34.1 >
diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c index 42bca2c3b5c3e..590e07bb27002 100644 --- a/drivers/pci/controller/dwc/pci-layerscape.c +++ b/drivers/pci/controller/dwc/pci-layerscape.c @@ -44,7 +44,7 @@ #define PCIE_IATU_NUM 6 struct ls_pcie_drvdata { - const u32 pf_off; + const u32 pf_lut_off; const struct dw_pcie_host_ops *ops; int (*exit_from_l2)(struct dw_pcie_rp *pp); bool scfg_support; @@ -54,13 +54,13 @@ struct ls_pcie_drvdata { struct ls_pcie { struct dw_pcie *pci; const struct ls_pcie_drvdata *drvdata; - void __iomem *pf_base; + void __iomem *pf_lut_base; struct regmap *scfg; int index; bool big_endian; }; -#define ls_pcie_pf_readl_addr(addr) ls_pcie_pf_readl(pcie, addr) +#define ls_pcie_pf_lut_readl_addr(addr) ls_pcie_pf_lut_readl(pcie, addr) #define to_ls_pcie(x) dev_get_drvdata((x)->dev) static bool ls_pcie_is_bridge(struct ls_pcie *pcie) @@ -101,20 +101,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie) iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR); } -static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off) +static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off) { if (pcie->big_endian) - return ioread32be(pcie->pf_base + off); + return ioread32be(pcie->pf_lut_base + off); - return ioread32(pcie->pf_base + off); + return ioread32(pcie->pf_lut_base + off); } -static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val) +static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val) { if (pcie->big_endian) - iowrite32be(val, pcie->pf_base + off); + iowrite32be(val, pcie->pf_lut_base + off); else - iowrite32(val, pcie->pf_base + off); + iowrite32(val, pcie->pf_lut_base + off); } static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp) @@ -124,11 +124,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp) u32 val; int ret; - val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR); + val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR); val |= PF_MCR_PTOMR; - ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val); + ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val); - ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR, + ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR, val, !(val & PF_MCR_PTOMR), PCIE_PME_TO_L2_TIMEOUT_US/10, PCIE_PME_TO_L2_TIMEOUT_US); @@ -147,15 +147,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp) * Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link * to exit L2 state. */ - val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR); + val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR); val |= PF_MCR_EXL2S; - ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val); + ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val); /* * L2 exit timeout of 10ms is not defined in the specifications, * it was chosen based on empirical observations. */ - ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR, + ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR, val, !(val & PF_MCR_EXL2S), 1000, 10000); @@ -243,7 +243,7 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = { }; static const struct ls_pcie_drvdata layerscape_drvdata = { - .pf_off = 0xc0000, + .pf_lut_off = 0xc0000, .pm_support = true, .exit_from_l2 = ls_pcie_exit_from_l2, }; @@ -293,7 +293,7 @@ static int ls_pcie_probe(struct platform_device *pdev) pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian"); - pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off; + pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off; if (pcie->drvdata->scfg_support) { pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
'pf' and 'lut' is just difference name in difference chips, but basic it is a MMIO base address plus an offset. Rename it to avoid duplicate pf_* and lut_* in driver. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Notes: pf_lut is better than pf_* or lut* because some chip use 'pf', some chip use 'lut'. change from v1 to v4 - new patch at v3 drivers/pci/controller/dwc/pci-layerscape.c | 34 ++++++++++----------- 1 file changed, 17 insertions(+), 17 deletions(-)