diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
deleted file mode 100644
index 9227bce0e2f5..000000000000
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ /dev/null
@@ -1,505 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8377E MDS Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- */
-
-/dts-v1/;
-
-/ {
-	model = "fsl,mpc8377emds";
-	compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8377@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// booting from NOR flash
-		ranges = <0 0x0 0xfe000000 0x02000000
-		          1 0x0 0xf8000000 0x00008000
-		          3 0x0 0xe0600000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			fs@100000 {
-				reg = <0x100000 0x800000>;
-			};
-
-			kernel@1d00000 {
-				reg = <0x1d00000 0x200000>;
-			};
-
-			dtb@1f00000 {
-				reg = <0x1f00000 0x100000>;
-			};
-		};
-
-		bcsr@1,0 {
-			reg = <1 0x0 0x8000>;
-			compatible = "fsl,mpc837xmds-bcsr";
-		};
-
-		nand@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8377-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <3 0x0 0x8000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x0c000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-
-				rtc@68 {
-					compatible = "dallas,ds1374";
-					reg = <0x68>;
-					interrupts = <19 0x8>;
-					interrupt-parent = <&ipic>;
-				};
-			};
-
-			sdhci@2e000 {
-				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
-				reg = <0x2e000 0x1000>;
-				interrupts = <42 0x8>;
-				interrupt-parent = <&ipic>;
-				sdhci,wp-inverted;
-				/* Filled in by U-Boot */
-				clock-frequency = <0>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "host";
-			phy_type = "ulpi";
-			sleep = <&pmc 0x00c00000>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0xc0000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x3>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy3>;
-			sleep = <&pmc 0x30000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <0x47 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <0x47 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <0x47 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <0x47 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <0x47 8>;
-			};
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x000000c0>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x00000030>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x12 */
-				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x13 */
-				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
-				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
-				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x15 */
-				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
-				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
-				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
-				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x16 */
-				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
-				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
-				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x17 */
-				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
-				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
-				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
-				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x18 */
-				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
-				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
-				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
-				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
-		sleep = <&pmc 0x00010000>;
-		clock-frequency = <0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	pci1: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe0009000 0x00001000>;
-		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
-		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 1 8
-				 0 0 0 2 &ipic 1 8
-				 0 0 0 3 &ipic 1 8
-				 0 0 0 4 &ipic 1 8>;
-		sleep = <&pmc 0x00300000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xa8000000
-				  0x02000000 0 0xa8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	pci2: pcie@e000a000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe000a000 0x00001000>;
-		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 2 8
-				 0 0 0 2 &ipic 2 8
-				 0 0 0 3 &ipic 2 8
-				 0 0 0 4 &ipic 2 8>;
-		sleep = <&pmc 0x000c0000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xc8000000
-				  0x02000000 0 0xc8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
deleted file mode 100644
index e45b25554e8c..000000000000
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ /dev/null
@@ -1,489 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8378E MDS Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- */
-
-/dts-v1/;
-
-/ {
-	model = "fsl,mpc8378emds";
-	compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8378@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// booting from NOR flash
-		ranges = <0 0x0 0xfe000000 0x02000000
-		          1 0x0 0xf8000000 0x00008000
-		          3 0x0 0xe0600000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			fs@100000 {
-				reg = <0x100000 0x800000>;
-			};
-
-			kernel@1d00000 {
-				reg = <0x1d00000 0x200000>;
-			};
-
-			dtb@1f00000 {
-				reg = <0x1f00000 0x100000>;
-			};
-		};
-
-		bcsr@1,0 {
-			reg = <1 0x0 0x8000>;
-			compatible = "fsl,mpc837xmds-bcsr";
-		};
-
-		nand@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8378-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <3 0x0 0x8000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x0c000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-
-				rtc@68 {
-					compatible = "dallas,ds1374";
-					reg = <0x68>;
-					interrupts = <19 0x8>;
-					interrupt-parent = <&ipic>;
-				};
-			};
-
-			sdhci@2e000 {
-				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
-				reg = <0x2e000 0x1000>;
-				interrupts = <42 0x8>;
-				interrupt-parent = <&ipic>;
-				sdhci,wp-inverted;
-				/* Filled in by U-Boot */
-				clock-frequency = <0>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "host";
-			phy_type = "ulpi";
-			sleep = <&pmc 0x00c00000>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0xc0000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x3>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy3>;
-			sleep = <&pmc 0x30000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x12 */
-				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x13 */
-				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
-				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
-				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x15 */
-				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
-				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
-				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
-				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x16 */
-				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
-				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
-				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x17 */
-				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
-				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
-				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
-				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x18 */
-				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
-				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
-				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
-				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
-		clock-frequency = <0>;
-		sleep = <&pmc 0x00010000>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	pci1: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe0009000 0x00001000>;
-		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
-		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 1 8
-				 0 0 0 2 &ipic 1 8
-				 0 0 0 3 &ipic 1 8
-				 0 0 0 4 &ipic 1 8>;
-		sleep = <&pmc 0x00300000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xa8000000
-				  0x02000000 0 0xa8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	pci2: pcie@e000a000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe000a000 0x00001000>;
-		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 2 8
-				 0 0 0 2 &ipic 2 8
-				 0 0 0 3 &ipic 2 8
-				 0 0 0 4 &ipic 2 8>;
-		sleep = <&pmc 0x000c0000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xc8000000
-				  0x02000000 0 0xc8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
deleted file mode 100644
index f7379a1cbb6c..000000000000
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ /dev/null
@@ -1,455 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8379E MDS Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- */
-
-/dts-v1/;
-
-/ {
-	model = "fsl,mpc8379emds";
-	compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8379@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// booting from NOR flash
-		ranges = <0 0x0 0xfe000000 0x02000000
-		          1 0x0 0xf8000000 0x00008000
-		          3 0x0 0xe0600000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			fs@100000 {
-				reg = <0x100000 0x800000>;
-			};
-
-			kernel@1d00000 {
-				reg = <0x1d00000 0x200000>;
-			};
-
-			dtb@1f00000 {
-				reg = <0x1f00000 0x100000>;
-			};
-		};
-
-		bcsr@1,0 {
-			reg = <1 0x0 0x8000>;
-			compatible = "fsl,mpc837xmds-bcsr";
-		};
-
-		nand@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8379-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <3 0x0 0x8000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x0c000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-
-				rtc@68 {
-					compatible = "dallas,ds1374";
-					reg = <0x68>;
-					interrupts = <19 0x8>;
-					interrupt-parent = <&ipic>;
-				};
-			};
-
-			sdhci@2e000 {
-				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
-				reg = <0x2e000 0x1000>;
-				interrupts = <42 0x8>;
-				interrupt-parent = <&ipic>;
-				sdhci,wp-inverted;
-				/* Filled in by U-Boot */
-				clock-frequency = <0>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "host";
-			phy_type = "ulpi";
-			sleep = <&pmc 0x00c00000>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0xc0000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x3>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy3>;
-			sleep = <&pmc 0x30000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x000000c0>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x00000030>;
-		};
-
-		sata@1a000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x1a000 0x1000>;
-			interrupts = <46 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x0000000c>;
-		};
-
-		sata@1b000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x1b000 0x1000>;
-			interrupts = <47 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x00000003>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x12 */
-				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x13 */
-				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
-				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
-				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x15 */
-				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
-				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
-				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
-				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x16 */
-				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
-				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
-				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x17 */
-				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
-				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
-				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
-				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x18 */
-				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
-				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
-				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
-				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
-		sleep = <&pmc 0x00010000>;
-		clock-frequency = <0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-};
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
deleted file mode 100644
index 3f5e5d10789f..000000000000
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_83xx=y
-CONFIG_MPC837x_MDS=y
-CONFIG_GEN_RTC=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_FSL=y
-CONFIG_NETDEVICES=y
-CONFIG_GIANFAR=y
-CONFIG_MARVELL_PHY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_WATCHDOG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 0fa29520808f..943c2d51bb60 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -15,7 +15,6 @@ CONFIG_MPC832x_MDS=y
 CONFIG_MPC832x_RDB=y
 CONFIG_MPC834x_ITX=y
 CONFIG_MPC836x_RDK=y
-CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_ASP834x=y
 CONFIG_QE_GPIO=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 71f5ea8f76a5..f08a7f43c629 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -48,7 +48,6 @@ CONFIG_MPC832x_MDS=y
 CONFIG_MPC832x_RDB=y
 CONFIG_MPC834x_ITX=y
 CONFIG_MPC836x_RDK=y
-CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_ASP834x=y
 CONFIG_PPC_86xx=y
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 90d0041fb8a7..978d2b12e97c 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -58,13 +58,6 @@ config MPC836x_RDK
 	  This option enables support for the MPC836x RDK Processor Board,
 	  also known as ZOOM PowerQUICC Kit.
 
-config MPC837x_MDS
-	bool "Freescale MPC837x MDS"
-	select DEFAULT_UIMAGE
-	select PPC_MPC837x
-	help
-	  This option enables support for the MPC837x MDS Processor Board.
-
 config MPC837x_RDB
 	bool "Freescale MPC837x RDB/WLAN"
 	select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 4f979f2fc64e..0c3a5067bd77 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_ITX)	+= mpc834x_itx.o
 obj-$(CONFIG_MPC836x_RDK)	+= mpc836x_rdk.o
 obj-$(CONFIG_MPC832x_MDS)	+= mpc832x_mds.o
-obj-$(CONFIG_MPC837x_MDS)	+= mpc837x_mds.o
 obj-$(CONFIG_MPC837x_RDB)	+= mpc837x_rdb.o
 obj-$(CONFIG_ASP834x)		+= asp834x.o
 obj-$(CONFIG_KMETER1)		+= km83xx.o
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
deleted file mode 100644
index fa3538803af7..000000000000
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/powerpc/platforms/83xx/mpc837x_mds.c
- *
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
- *
- * MPC837x MDS board specific routines
- */
-
-#include <linux/pci.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
-#include <asm/ipic.h>
-#include <asm/udbg.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc83xx.h"
-
-#define BCSR12_USB_SER_MASK	0x8a
-#define BCSR12_USB_SER_PIN	0x80
-#define BCSR12_USB_SER_DEVICE	0x02
-
-static int __init mpc837xmds_usb_cfg(void)
-{
-	struct device_node *np;
-	const void *phy_type, *mode;
-	void __iomem *bcsr_regs = NULL;
-	u8 bcsr12;
-	int ret;
-
-	ret = mpc837x_usb_cfg();
-	if (ret)
-		return ret;
-	/* Map BCSR area */
-	np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr");
-	if (np) {
-		bcsr_regs = of_iomap(np, 0);
-		of_node_put(np);
-	}
-	if (!bcsr_regs)
-		return -1;
-
-	np = of_find_node_by_name(NULL, "usb");
-	if (!np) {
-		ret = -ENODEV;
-		goto out;
-	}
-	phy_type = of_get_property(np, "phy_type", NULL);
-	if (phy_type && !strcmp(phy_type, "ulpi")) {
-		clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN);
-	} else if (phy_type && !strcmp(phy_type, "serial")) {
-		mode = of_get_property(np, "dr_mode", NULL);
-		bcsr12 = in_8(bcsr_regs + 12) & ~BCSR12_USB_SER_MASK;
-		bcsr12 |= BCSR12_USB_SER_PIN;
-		if (mode && !strcmp(mode, "peripheral"))
-			bcsr12 |= BCSR12_USB_SER_DEVICE;
-		out_8(bcsr_regs + 12, bcsr12);
-	} else {
-		printk(KERN_ERR "USB DR: unsupported PHY\n");
-	}
-
-	of_node_put(np);
-out:
-	iounmap(bcsr_regs);
-	return ret;
-}
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init mpc837x_mds_setup_arch(void)
-{
-	mpc83xx_setup_arch();
-	mpc837xmds_usb_cfg();
-}
-
-machine_device_initcall(mpc837x_mds, mpc83xx_declare_of_platform_devices);
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init mpc837x_mds_probe(void)
-{
-	return of_machine_is_compatible("fsl,mpc837xmds");
-}
-
-define_machine(mpc837x_mds) {
-	.name			= "MPC837x MDS",
-	.probe			= mpc837x_mds_probe,
-	.setup_arch		= mpc837x_mds_setup_arch,
-	.discover_phbs  	= mpc83xx_setup_pci,
-	.init_IRQ		= mpc83xx_ipic_init_IRQ,
-	.get_irq		= ipic_get_irq,
-	.restart		= mpc83xx_restart,
-	.time_init		= mpc83xx_time_init,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-};
