powerpc: dts: add device tree for T1040RDB-REV-A

On board rev A, the network interface labels for the switch ports
written on the front panel are different than on rev B and later.

This patch introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
---
 arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts | 185 +++++++++++++++++++
 1 file changed, 185 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts

Hi Maxim,

On Tue, Jan 11, 2022 at 06:22:04PM +0300, Maxim Kiselev wrote:
> On board rev A, the network interface labels for the switch ports
> written on the front panel are different than on rev B and later.
> 
> This patch introduces a separate device tree for rev A.
> The main device tree is supposed to cover rev B and later.
> 
> Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
> ---
>  arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts | 185 +++++++++++++++++++
>  1 file changed, 185 insertions(+)
>  create mode 100644 arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
> 
> diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
> new file mode 100644
> index 0000000000000..f74486ba1d45f
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
> @@ -0,0 +1,185 @@
> +/*
> + * T1040RDB Device Tree Source
> + *
> + * Copyright 2014 - 2015 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + *     * Redistributions of source code must retain the above copyright
> + *	 notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *	 notice, this list of conditions and the following disclaimer in the
> + *	 documentation and/or other materials provided with the distribution.
> + *     * Neither the name of Freescale Semiconductor nor the
> + *	 names of its contributors may be used to endorse or promote products
> + *	 derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/include/ "t104xsi-pre.dtsi"
> +/include/ "t104xrdb.dtsi"
> +
> +/ {
> +	model = "fsl,T1040RDB-REV-A";
> +	compatible = "fsl,T1040RDB-REV-A";
> +
> +	aliases {
> +		phy_sgmii_2 = &phy_sgmii_2;
> +	};
> +
> +	soc@ffe000000 {
> +		fman@400000 {
> +			ethernet@e0000 {
> +				fixed-link = <0 1 1000 0 0>;
> +				phy-connection-type = "sgmii";
> +			};
> +
> +			ethernet@e2000 {
> +				fixed-link = <1 1 1000 0 0>;
> +				phy-connection-type = "sgmii";
> +			};
> +
> +			ethernet@e4000 {
> +				phy-handle = <&phy_sgmii_2>;
> +				phy-connection-type = "sgmii";
> +			};
> +
> +			mdio@fc000 {
> +				phy_sgmii_2: ethernet-phy@3 {
> +					reg = <0x03>;
> +				};
> +
> +				/* VSC8514 QSGMII PHY */
> +				phy_qsgmii_0: ethernet-phy@4 {
> +					reg = <0x4>;
> +				};
> +
> +				phy_qsgmii_1: ethernet-phy@5 {
> +					reg = <0x5>;
> +				};
> +
> +				phy_qsgmii_2: ethernet-phy@6 {
> +					reg = <0x6>;
> +				};
> +
> +				phy_qsgmii_3: ethernet-phy@7 {
> +					reg = <0x7>;
> +				};
> +
> +				/* VSC8514 QSGMII PHY */
> +				phy_qsgmii_4: ethernet-phy@8 {
> +					reg = <0x8>;
> +				};
> +
> +				phy_qsgmii_5: ethernet-phy@9 {
> +					reg = <0x9>;
> +				};
> +
> +				phy_qsgmii_6: ethernet-phy@a {
> +					reg = <0xa>;
> +				};
> +
> +				phy_qsgmii_7: ethernet-phy@b {
> +					reg = <0xb>;
> +				};
> +			};
> +		};
> +	};
> +
> +	ifc: localbus@ffe124000 {
> +		cpld@3,0 {
> +			compatible = "fsl,t1040rdb-cpld";
> +		};
> +	};
> +};
> +
> +#include "t1040si-post.dtsi"
> +
> +&seville_switch {
> +	status = "okay";
> +};
> +
> +&seville_port0 {
> +	managed = "in-band-status";
> +	phy-handle = <&phy_qsgmii_0>;
> +	phy-mode = "qsgmii";
> +	label = "ETH5";
> +	status = "okay";
> +};
> +
> +&seville_port1 {
> +	managed = "in-band-status";
> +	phy-handle = <&phy_qsgmii_1>;
> +	phy-mode = "qsgmii";
> +	label = "ETH4";
> +	status = "okay";
> +};
> +
> +&seville_port2 {
> +	managed = "in-band-status";
> +	phy-handle = <&phy_qsgmii_2>;
> +	phy-mode = "qsgmii";
> +	label = "ETH7";
> +	status = "okay";
> +};
> +
> +&seville_port3 {
> +	managed = "in-band-status";
> +	phy-handle = <&phy_qsgmii_3>;
> +	phy-mode = "qsgmii";
> +	label = "ETH6";
> +	status = "okay";
> +};
> +
> +&seville_port4 {
> +	managed = "in-band-status";
> +	phy-handle = <&phy_qsgmii_4>;
> +	phy-mode = "qsgmii";
> +	label = "ETH9";
> +	status = "okay";
> +};
> +
> +&seville_port5 {
> +	managed = "in-band-status";
> +	phy-handle = <&phy_qsgmii_5>;
> +	phy-mode = "qsgmii";
> +	label = "ETH8";
> +	status = "okay";
> +};
> +
> +&seville_port6 {
> +	managed = "in-band-status";
> +	phy-handle = <&phy_qsgmii_6>;
> +	phy-mode = "qsgmii";
> +	label = "ETH11";
> +	status = "okay";
> +};
> +
> +&seville_port7 {
> +	managed = "in-band-status";
> +	phy-handle = <&phy_qsgmii_7>;
> +	phy-mode = "qsgmii";
> +	label = "ETH10";
> +	status = "okay";
> +};
> +
> +&seville_port8 {
> +	ethernet = <&enet0>;
> +	status = "okay";
> +};
> -- 
> 2.32.0
>

This is pretty much not the patch I was expecting to see.
I was expecting to see arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
containing only this:

/include/ t1040rdb.dts

/ {
	model = "fsl,T1040RDB-REV-A";
	compatible = "fsl,T1040RDB-REV-A";
};

&seville_port0 {
	label = "ETH5";
};

&seville_port2 {
	label = "ETH7";
};

&seville_port4 {
	label = "ETH9";
};

&seville_port6 {
	label = "ETH11";
};

Also, I don't see the changes from your original patch applied to the
main t1040rdb.dts. Did you forget to include them?