diff mbox series

[v3,devicetree,1/2] powerpc: dts: t1040: add bindings for Seville Ethernet switch

Message ID 20201001132013.1866299-2-vladimir.oltean@nxp.com (mailing list archive)
State Not Applicable
Headers show
Series Add Seville Ethernet switch to T1040RDB | expand

Checks

Context Check Description
snowpatch_ozlabs/apply_patch success Successfully applied on branch powerpc/merge (548ccca2a8864b7498ad8cc420fa01aecd4d4114)
snowpatch_ozlabs/checkpatch success total: 0 errors, 0 warnings, 0 checks, 84 lines checked
snowpatch_ozlabs/needsstable success Patch has no Fixes tags

Commit Message

Vladimir Oltean Oct. 1, 2020, 1:20 p.m. UTC
Add the description of the embedded L2 switch inside the SoC dtsi file
for NXP T1040.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
---
Changes in v3:
Added definition for frame extraction interrupt, even if the driver
doesn't use it at the moment.

Changes in v2:
Make switch node disabled by default.

 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 78 +++++++++++++++++++++
 1 file changed, 78 insertions(+)

Comments

Andrew Lunn Oct. 1, 2020, 1:23 p.m. UTC | #1
On Thu, Oct 01, 2020 at 04:20:12PM +0300, Vladimir Oltean wrote:
> Add the description of the embedded L2 switch inside the SoC dtsi file
> for NXP T1040.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 315d0557eefc..f58eb820eb5e 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -628,6 +628,84 @@  mdio@fd000 {
 			status = "disabled";
 		};
 	};
+
+	seville_switch: ethernet-switch@800000 {
+		compatible = "mscc,vsc9953-switch";
+		reg = <0x800000 0x290000>;
+		interrupts = <26 2 0 0>;
+		interrupt-names = "xtr";
+		little-endian;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			seville_port0: port@0 {
+				reg = <0>;
+				status = "disabled";
+			};
+
+			seville_port1: port@1 {
+				reg = <1>;
+				status = "disabled";
+			};
+
+			seville_port2: port@2 {
+				reg = <2>;
+				status = "disabled";
+			};
+
+			seville_port3: port@3 {
+				reg = <3>;
+				status = "disabled";
+			};
+
+			seville_port4: port@4 {
+				reg = <4>;
+				status = "disabled";
+			};
+
+			seville_port5: port@5 {
+				reg = <5>;
+				status = "disabled";
+			};
+
+			seville_port6: port@6 {
+				reg = <6>;
+				status = "disabled";
+			};
+
+			seville_port7: port@7 {
+				reg = <7>;
+				status = "disabled";
+			};
+
+			seville_port8: port@8 {
+				reg = <8>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+			seville_port9: port@9 {
+				reg = <9>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 &qe {