Message ID | 20181030023604.34027-4-peng.ma@nxp.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | [v11,1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT | expand |
Context | Check | Description |
---|---|---|
snowpatch_ozlabs/apply_patch | success | next/apply_patch Successfully applied |
snowpatch_ozlabs/checkpatch | warning | Test checkpatch on branch next |
On Tue, Oct 30, 2018 at 10:36:01AM +0800, Peng Ma wrote: > add the qDMA device tree nodes for LS1021A devices. > > Signed-off-by: Wen He <wen.he_1@nxp.com> > Signed-off-by: Peng Ma <peng.ma@nxp.com> Applied, thanks.
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index f184905..c0ed6be 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -806,5 +806,25 @@ #size-cells = <1>; ranges = <0x0 0x0 0x10010000 0x10000>; }; + + qdma: dma-controller@8390000 { + compatible = "fsl,ls1021a-qdma"; + reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8389000 0x0 0x1000>, /* Status regs */ + <0x0 0x838a000 0x0 0x2000>; /* Block regs */ + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", + "qdma-queue0", "qdma-queue1"; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x1000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + }; };