[24/24] powerpc: Remove old unused icswx based coprocessor support

diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index 5b4023c616f7..1a220cdff923 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -97,11 +97,6 @@  typedef struct {
 #ifdef CONFIG_PPC_SUBPAGE_PROT
 	struct subpage_prot_table spt;
 #endif /* CONFIG_PPC_SUBPAGE_PROT */
-#ifdef CONFIG_PPC_ICSWX
-	struct spinlock *cop_lockp; /* guard acop and cop_pid */
-	unsigned long acop;	/* mask of enabled coprocessor types */
-	unsigned int cop_pid;	/* pid value used with coprocessors */
-#endif /* CONFIG_PPC_ICSWX */
 #ifdef CONFIG_PPC_64K_PAGES
 	/* for 4K PTE fragment support */
 	void *pte_frag;
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 26a587a7f50f..f14aec069d76 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -107,12 +107,6 @@  static inline void switch_mm_irqs_off(struct mm_struct *prev,
 	if (prev == next)
 		return;
 
-#ifdef CONFIG_PPC_ICSWX
-	/* Switch coprocessor context only if prev or next uses a coprocessor */
-	if (prev->context.acop || next->context.acop)
-		switch_cop(next);
-#endif /* CONFIG_PPC_ICSWX */
-
 	/* We must stop all altivec streams before changing the HW
 	 * context
 	 */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 737e012ef56e..eb2a33d5df26 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -221,10 +221,7 @@ 
 #define SPRN_CSRR0	SPRN_SRR2 /* Critical Save and Restore Register 0 */
 #define SPRN_CSRR1	SPRN_SRR3 /* Critical Save and Restore Register 1 */
 #endif
-
-#ifdef CONFIG_PPC_ICSWX
 #define SPRN_HACOP	0x15F	/* Hypervisor Available Coprocessor Register */
-#endif
 
 /* Bit definitions for CCR1. */
 #define	CCR1_DPC	0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 7414034df1c3..fa6a6ba34355 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -22,8 +22,6 @@  ifeq ($(CONFIG_PPC_STD_MMU_64),y)
 obj-$(CONFIG_PPC_4K_PAGES)	+= hash64_4k.o
 obj-$(CONFIG_PPC_64K_PAGES)	+= hash64_64k.o
 endif
-obj-$(CONFIG_PPC_ICSWX)		+= icswx.o
-obj-$(CONFIG_PPC_ICSWX_PID)	+= icswx_pid.o
 obj-$(CONFIG_40x)		+= 40x_mmu.o
 obj-$(CONFIG_44x)		+= 44x_mmu.o
 obj-$(CONFIG_PPC_8xx)		+= 8xx_mmu.o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index c2720ebb6a62..fbea5446b064 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -45,8 +45,6 @@ 
 #include <asm/siginfo.h>
 #include <asm/debug.h>
 
-#include "icswx.h"
-
 static inline bool notify_page_fault(struct pt_regs *regs)
 {
 	bool ret = false;
@@ -389,19 +387,6 @@  static int __do_page_fault(struct pt_regs *regs, unsigned long address,
 	int fault, major = 0;
 	bool store_update_sp = false;
 
-#ifdef CONFIG_PPC_ICSWX
-	/*
-	 * we need to do this early because this "data storage
-	 * interrupt" does not update the DAR/DEAR so we don't want to
-	 * look at it
-	 */
-	if (error_code & ICSWX_DSI_UCT) {
-		int rc = acop_handle_fault(regs, address, error_code);
-		if (rc)
-			return rc;
-	}
-#endif /* CONFIG_PPC_ICSWX */
-
 	if (notify_page_fault(regs))
 		return 0;
 
diff --git a/arch/powerpc/mm/icswx.c b/arch/powerpc/mm/icswx.c
deleted file mode 100644
index 1fa794d7d59f..000000000000
--- a/arch/powerpc/mm/icswx.c
+++ /dev/null
@@ -1,292 +0,0 @@ 
-/*
- *  ICSWX and ACOP Management
- *
- *  Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/uaccess.h>
-
-#include "icswx.h"
-
-/*
- * The processor and its L2 cache cause the icswx instruction to
- * generate a COP_REQ transaction on PowerBus. The transaction has no
- * address, and the processor does not perform an MMU access to
- * authenticate the transaction. The command portion of the PowerBus
- * COP_REQ transaction includes the LPAR_ID (LPID) and the coprocessor
- * Process ID (PID), which the coprocessor compares to the authorized
- * LPID and PID held in the coprocessor, to determine if the process
- * is authorized to generate the transaction.  The data of the COP_REQ
- * transaction is 128-byte or less in size and is placed in cacheable
- * memory on a 128-byte cache line boundary.
- *
- * The task to use a coprocessor should use use_cop() to mark the use
- * of the Coprocessor Type (CT) and context switching. On a server
- * class processor, the PID register is used only for coprocessor
- * management + * and so a coprocessor PID is allocated before
- * executing icswx + * instruction. Drop_cop() is used to free the
- * coprocessor PID.
- *
- * Example:
- * Host Fabric Interface (HFI) is a PowerPC network coprocessor.
- * Each HFI have multiple windows. Each HFI window serves as a
- * network device sending to and receiving from HFI network.
- * HFI immediate send function uses icswx instruction. The immediate
- * send function allows small (single cache-line) packets be sent
- * without using the regular HFI send FIFO and doorbell, which are
- * much slower than immediate send.
- *
- * For each task intending to use HFI immediate send, the HFI driver
- * calls use_cop() to obtain a coprocessor PID for the task.
- * The HFI driver then allocate a free HFI window and save the
- * coprocessor PID to the HFI window to allow the task to use the
- * HFI window.
- *
- * The HFI driver repeatedly creates immediate send packets and
- * issues icswx instruction to send data through the HFI window.
- * The HFI compares the coprocessor PID in the CPU PID register
- * to the PID held in the HFI window to determine if the transaction
- * is allowed.
- *
- * When the task to release the HFI window, the HFI driver calls
- * drop_cop() to release the coprocessor PID.
- */
-
-void switch_cop(struct mm_struct *next)
-{
-#ifdef CONFIG_PPC_ICSWX_PID
-	mtspr(SPRN_PID, next->context.cop_pid);
-#endif
-	mtspr(SPRN_ACOP, next->context.acop);
-}
-
-/**
- * Start using a coprocessor.
- * @acop: mask of coprocessor to be used.
- * @mm: The mm the coprocessor to associate with. Most likely current mm.
- *
- * Return a positive PID if successful. Negative errno otherwise.
- * The returned PID will be fed to the coprocessor to determine if an
- * icswx transaction is authenticated.
- */
-int use_cop(unsigned long acop, struct mm_struct *mm)
-{
-	int ret;
-
-	if (!cpu_has_feature(CPU_FTR_ICSWX))
-		return -ENODEV;
-
-	if (!mm || !acop)
-		return -EINVAL;
-
-	/* The page_table_lock ensures mm_users won't change under us */
-	spin_lock(&mm->page_table_lock);
-	spin_lock(mm->context.cop_lockp);
-
-	ret = get_cop_pid(mm);
-	if (ret < 0)
-		goto out;
-
-	/* update acop */
-	mm->context.acop |= acop;
-
-	sync_cop(mm);
-
-	/*
-	 * If this is a threaded process then there might be other threads
-	 * running. We need to send an IPI to force them to pick up any
-	 * change in PID and ACOP.
-	 */
-	if (atomic_read(&mm->mm_users) > 1)
-		smp_call_function(sync_cop, mm, 1);
-
-out:
-	spin_unlock(mm->context.cop_lockp);
-	spin_unlock(&mm->page_table_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(use_cop);
-
-/**
- * Stop using a coprocessor.
- * @acop: mask of coprocessor to be stopped.
- * @mm: The mm the coprocessor associated with.
- */
-void drop_cop(unsigned long acop, struct mm_struct *mm)
-{
-	int free_pid;
-
-	if (!cpu_has_feature(CPU_FTR_ICSWX))
-		return;
-
-	if (WARN_ON_ONCE(!mm))
-		return;
-
-	/* The page_table_lock ensures mm_users won't change under us */
-	spin_lock(&mm->page_table_lock);
-	spin_lock(mm->context.cop_lockp);
-
-	mm->context.acop &= ~acop;
-
-	free_pid = disable_cop_pid(mm);
-	sync_cop(mm);
-
-	/*
-	 * If this is a threaded process then there might be other threads
-	 * running. We need to send an IPI to force them to pick up any
-	 * change in PID and ACOP.
-	 */
-	if (atomic_read(&mm->mm_users) > 1)
-		smp_call_function(sync_cop, mm, 1);
-
-	if (free_pid != COP_PID_NONE)
-		free_cop_pid(free_pid);
-
-	spin_unlock(mm->context.cop_lockp);
-	spin_unlock(&mm->page_table_lock);
-}
-EXPORT_SYMBOL_GPL(drop_cop);
-
-static int acop_use_cop(int ct)
-{
-	/* There is no alternate policy, yet */
-	return -1;
-}
-
-/*
- * Get the instruction word at the NIP
- */
-static u32 acop_get_inst(struct pt_regs *regs)
-{
-	u32 inst;
-	u32 __user *p;
-
-	p = (u32 __user *)regs->nip;
-	if (!access_ok(VERIFY_READ, p, sizeof(*p)))
-		return 0;
-
-	if (__get_user(inst, p))
-		return 0;
-
-	return inst;
-}
-
-/**
- * @regs: registers at time of interrupt
- * @address: storage address
- * @error_code: Fault code, usually the DSISR or ESR depending on
- *		processor type
- *
- * Return 0 if we are able to resolve the data storage fault that
- * results from a CT miss in the ACOP register.
- */
-int acop_handle_fault(struct pt_regs *regs, unsigned long address,
-		      unsigned long error_code)
-{
-	int ct;
-	u32 inst = 0;
-
-	if (!cpu_has_feature(CPU_FTR_ICSWX)) {
-		pr_info("No coprocessors available");
-		_exception(SIGILL, regs, ILL_ILLOPN, address);
-	}
-
-	if (!user_mode(regs)) {
-		/* this could happen if the HV denies the
-		 * kernel access, for now we just die */
-		die("ICSWX from kernel failed", regs, SIGSEGV);
-	}
-
-	/* Some implementations leave us a hint for the CT */
-	ct = ICSWX_GET_CT_HINT(error_code);
-	if (ct < 0) {
-		/* we have to peek at the instruction word to figure out CT */
-		u32 ccw;
-		u32 rs;
-
-		inst = acop_get_inst(regs);
-		if (inst == 0)
-			return -1;
-
-		rs = (inst >> (31 - 10)) & 0x1f;
-		ccw = regs->gpr[rs];
-		ct = (ccw >> 16) & 0x3f;
-	}
-
-	/*
-	 * We could be here because another thread has enabled acop
-	 * but the ACOP register has yet to be updated.
-	 *
-	 * This should have been taken care of by the IPI to sync all
-	 * the threads (see smp_call_function(sync_cop, mm, 1)), but
-	 * that could take forever if there are a significant amount
-	 * of threads.
-	 *
-	 * Given the number of threads on some of these systems,
-	 * perhaps this is the best way to sync ACOP rather than whack
-	 * every thread with an IPI.
-	 */
-	if ((acop_copro_type_bit(ct) & current->active_mm->context.acop) != 0) {
-		sync_cop(current->active_mm);
-		return 0;
-	}
-
-	/* check for alternate policy */
-	if (!acop_use_cop(ct))
-		return 0;
-
-	/* at this point the CT is unknown to the system */
-	pr_warn("%s[%d]: Coprocessor %d is unavailable\n",
-		current->comm, current->pid, ct);
-
-	/* get inst if we don't already have it */
-	if (inst == 0) {
-		inst = acop_get_inst(regs);
-		if (inst == 0)
-			return -1;
-	}
-
-	/* Check if the instruction is the "record form" */
-	if (inst & 1) {
-		/*
-		 * the instruction is "record" form so we can reject
-		 * using CR0
-		 */
-		regs->ccr &= ~(0xful << 28);
-		regs->ccr |= ICSWX_RC_NOT_FOUND << 28;
-
-		/* Move on to the next instruction */
-		regs->nip += 4;
-	} else {
-		/*
-		 * There is no architected mechanism to report a bad
-		 * CT so we could either SIGILL or report nothing.
-		 * Since the non-record version should only bu used
-		 * for "hints" or "don't care" we should probably do
-		 * nothing.  However, I could see how some people
-		 * might want an SIGILL so it here if you want it.
-		 */
-#ifdef CONFIG_PPC_ICSWX_USE_SIGILL
-		_exception(SIGILL, regs, ILL_ILLOPN, address);
-#else
-		regs->nip += 4;
-#endif
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(acop_handle_fault);
diff --git a/arch/powerpc/mm/icswx.h b/arch/powerpc/mm/icswx.h
deleted file mode 100644
index 6dedc08e62c8..000000000000
--- a/arch/powerpc/mm/icswx.h
+++ /dev/null
@@ -1,68 +0,0 @@ 
-#ifndef _ARCH_POWERPC_MM_ICSWX_H_
-#define _ARCH_POWERPC_MM_ICSWX_H_
-
-/*
- *  ICSWX and ACOP Management
- *
- *  Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/mmu_context.h>
-
-/* also used to denote that PIDs are not used */
-#define COP_PID_NONE 0
-
-static inline void sync_cop(void *arg)
-{
-	struct mm_struct *mm = arg;
-
-	if (mm == current->active_mm)
-		switch_cop(current->active_mm);
-}
-
-#ifdef CONFIG_PPC_ICSWX_PID
-extern int get_cop_pid(struct mm_struct *mm);
-extern int disable_cop_pid(struct mm_struct *mm);
-extern void free_cop_pid(int free_pid);
-#else
-#define get_cop_pid(m) (COP_PID_NONE)
-#define disable_cop_pid(m) (COP_PID_NONE)
-#define free_cop_pid(p)
-#endif
-
-/*
- * These are implementation bits for architected registers.  If this
- * ever becomes architecture the should be moved to reg.h et. al.
- */
-/* UCT is the same bit for Server and Embedded */
-#define ICSWX_DSI_UCT		0x00004000  /* Unavailable Coprocessor Type */
-
-#ifdef CONFIG_PPC_BOOK3E
-/* Embedded implementation gives us no hints as to what the CT is */
-#define ICSWX_GET_CT_HINT(x) (-1)
-#else
-/* Server implementation contains the CT value in the DSISR */
-#define ICSWX_DSISR_CTMASK	0x00003f00
-#define ICSWX_GET_CT_HINT(x)	(((x) & ICSWX_DSISR_CTMASK) >> 8)
-#endif
-
-#define ICSWX_RC_STARTED	0x8	/* The request has been started */
-#define ICSWX_RC_NOT_IDLE	0x4	/* No coprocessor found idle */
-#define ICSWX_RC_NOT_FOUND	0x2	/* No coprocessor found */
-#define ICSWX_RC_UNDEFINED	0x1	/* Reserved */
-
-extern int acop_handle_fault(struct pt_regs *regs, unsigned long address,
-			     unsigned long error_code);
-
-static inline u64 acop_copro_type_bit(unsigned int type)
-{
-	return 1ULL << (63 - type);
-}
-
-#endif /* !_ARCH_POWERPC_MM_ICSWX_H_ */
diff --git a/arch/powerpc/mm/icswx_pid.c b/arch/powerpc/mm/icswx_pid.c
deleted file mode 100644
index 91e30eb7d054..000000000000
--- a/arch/powerpc/mm/icswx_pid.c
+++ /dev/null
@@ -1,87 +0,0 @@ 
-/*
- *  ICSWX and ACOP/PID Management
- *
- *  Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-#include <linux/idr.h>
-#include <linux/module.h>
-#include "icswx.h"
-
-#define COP_PID_MIN (COP_PID_NONE + 1)
-#define COP_PID_MAX (0xFFFF)
-
-static DEFINE_SPINLOCK(mmu_context_acop_lock);
-static DEFINE_IDA(cop_ida);
-
-static int new_cop_pid(struct ida *ida, int min_id, int max_id,
-		       spinlock_t *lock)
-{
-	int index;
-	int err;
-
-again:
-	if (!ida_pre_get(ida, GFP_KERNEL))
-		return -ENOMEM;
-
-	spin_lock(lock);
-	err = ida_get_new_above(ida, min_id, &index);
-	spin_unlock(lock);
-
-	if (err == -EAGAIN)
-		goto again;
-	else if (err)
-		return err;
-
-	if (index > max_id) {
-		spin_lock(lock);
-		ida_remove(ida, index);
-		spin_unlock(lock);
-		return -ENOMEM;
-	}
-
-	return index;
-}
-
-int get_cop_pid(struct mm_struct *mm)
-{
-	int pid;
-
-	if (mm->context.cop_pid == COP_PID_NONE) {
-		pid = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX,
-				  &mmu_context_acop_lock);
-		if (pid >= 0)
-			mm->context.cop_pid = pid;
-	}
-	return mm->context.cop_pid;
-}
-
-int disable_cop_pid(struct mm_struct *mm)
-{
-	int free_pid = COP_PID_NONE;
-
-	if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) {
-		free_pid = mm->context.cop_pid;
-		mm->context.cop_pid = COP_PID_NONE;
-	}
-	return free_pid;
-}
-
-void free_cop_pid(int free_pid)
-{
-	spin_lock(&mmu_context_acop_lock);
-	ida_remove(&cop_ida, free_pid);
-	spin_unlock(&mmu_context_acop_lock);
-}
diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c
index 183a67baeccd..5588f3ce647d 100644
--- a/arch/powerpc/mm/mmu_context_book3s64.c
+++ b/arch/powerpc/mm/mmu_context_book3s64.c
@@ -29,8 +29,6 @@ 
 #include <asm/kvm_book3s_asm.h>
 #endif
 
-#include "icswx.h"
-
 static DEFINE_SPINLOCK(mmu_context_lock);
 static DEFINE_IDA(mmu_context_ida);
 
@@ -169,16 +167,6 @@  int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 		return index;
 
 	mm->context.id = index;
-#ifdef CONFIG_PPC_ICSWX
-	mm->context.cop_lockp = kmalloc(sizeof(spinlock_t), GFP_KERNEL);
-	if (!mm->context.cop_lockp) {
-		__destroy_context(index);
-		subpage_prot_free(mm);
-		mm->context.id = MMU_NO_CONTEXT;
-		return -ENOMEM;
-	}
-	spin_lock_init(mm->context.cop_lockp);
-#endif /* CONFIG_PPC_ICSWX */
 
 #ifdef CONFIG_PPC_64K_PAGES
 	mm->context.pte_frag = NULL;
@@ -230,12 +218,6 @@  void destroy_context(struct mm_struct *mm)
 #ifdef CONFIG_SPAPR_TCE_IOMMU
 	WARN_ON_ONCE(!list_empty(&mm->context.iommu_group_mem_list));
 #endif
-#ifdef CONFIG_PPC_ICSWX
-	drop_cop(mm->context.acop, mm);
-	kfree(mm->context.cop_lockp);
-	mm->context.cop_lockp = NULL;
-#endif /* CONFIG_PPC_ICSWX */
-
 	if (radix_enabled()) {
 		/*
 		 * Radix doesn't have a valid bit in the process table
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 2f629e0551e9..9539620a48d4 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -271,44 +271,6 @@  config VSX
 
 	  If in doubt, say Y here.
 
-config PPC_ICSWX
-	bool "Support for PowerPC icswx coprocessor instruction"
-	depends on PPC_BOOK3S_64
-	default n
-	---help---
-
-	  This option enables kernel support for the PowerPC Initiate
-	  Coprocessor Store Word (icswx) coprocessor instruction on POWER7
-	  and POWER8 processors. POWER9 uses new copy/paste instructions
-	  to invoke the coprocessor.
-
-	  This option is only useful if you have a processor that supports
-	  the icswx coprocessor instruction. It does not have any effect
-	  on processors without the icswx coprocessor instruction.
-
-	  This option slightly increases kernel memory usage.
-
-	  If in doubt, say N here.
-
-config PPC_ICSWX_PID
-	bool "icswx requires direct PID management"
-	depends on PPC_ICSWX
-	default y
-	---help---
-	  The PID register in server is used explicitly for ICSWX.  In
-	  embedded systems PID management is done by the system.
-
-config PPC_ICSWX_USE_SIGILL
-	bool "Should a bad CT cause a SIGILL?"
-	depends on PPC_ICSWX
-	default n
-	---help---
-	  Should a bad CT used for "non-record form ICSWX" cause an
-	  illegal instruction signal or should it be silent as
-	  architected.
-
-	  If in doubt, say N here.
-
 config SPE_POSSIBLE
 	def_bool y
 	depends on E200 || (E500 && !PPC_E500MC)