@@ -303,8 +303,18 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state)
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
+ /*
+ * We must stop the state machine manually, otherwise it stops out of
+ * control, possibly with the phydev->lock held. Upon resume, netdev
+ * may call phy routines that try to grab the same lock, and that may
+ * lead to a deadlock.
+ */
+ if (phydev->attached_dev)
+ phy_stop_machine(phydev);
+
if (!mdio_bus_phy_may_suspend(phydev))
return 0;
+
return phydrv->suspend(phydev);
}
@@ -312,10 +322,20 @@ static int mdio_bus_resume(struct device * dev)
{
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
+ int ret;
if (!mdio_bus_phy_may_suspend(phydev))
- return 0;
- return phydrv->resume(phydev);
+ goto no_resume;
+
+ ret = phydrv->resume(phydev);
+ if (ret < 0)
+ return ret;
+
+no_resume:
+ if (phydev->attached_dev)
+ phy_start_machine(phydev, NULL);
+
+ return 0;
}
struct bus_type mdio_bus_type = {
Sometimes kernel hangs on resume with the following trace: ucc_geth e0102000.ucc: resume INFO: task bash:1764 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. bash D 0fecf43c 0 1764 1763 0x00000000 Call Trace: [cf9a7c10] [c0012868] ret_from_except+0x0/0x14 (unreliable) --- Exception: cf9a7ce0 at __switch_to+0x4c/0x6c LR = 0xcf9a7cc0 [cf9a7cd0] [c0008c14] __switch_to+0x4c/0x6c (unreliable) [cf9a7ce0] [c028bcfc] schedule+0x158/0x260 [cf9a7d10] [c028c720] __mutex_lock_slowpath+0x80/0xd8 [cf9a7d40] [c01cf388] phy_stop+0x20/0x70 [cf9a7d50] [c01d514c] ugeth_resume+0x6c/0x13c [...] Here is why. On suspend: - PM core starts suspending devices, ucc_geth_suspend gets called; - ucc_geth calls phy_stop() on suspend. Note that phy_stop() is mostly asynchronous so it doesn't block ucc_geth's suspend routine, it just sets PHY_HALTED state and disables PHY's interrupts; - Suddenly the state machine gets scheduled, it grabs the phydev->lock mutex and tries to process the PHY_HALTED state, so it calls phydev->adjust_link(phydev->attached_dev). In ucc_geth case adjust_link() calls msleep(), which reschedules the code flow back to PM core, which now finishes suspend and so we end up sleeping with phydev->lock mutex held. On resume: - PM core starts resuming devices (notice that nobody rescheduled the state machine yet, so the mutex is still held), the core calls ucc_geth's resume routine; - ucc_geth_resume restarts the PHY with phy_stop()/phy_start() sequence, and the phy_*() calls are trying to grab the phydev->lock mutex. Here comes the deadlock. This patch fixes the issue by stopping the state machine on suspend and starting it again on resume. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> --- drivers/net/phy/mdio_bus.c | 24 ++++++++++++++++++++++-- 1 files changed, 22 insertions(+), 2 deletions(-)