From patchwork Fri Nov 7 14:15:42 2008 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martyn Welch X-Patchwork-Id: 7716 X-Patchwork-Delegate: galak@kernel.crashing.org Return-Path: X-Original-To: patchwork-incoming@ozlabs.org Delivered-To: patchwork-incoming@ozlabs.org Received: from ozlabs.org (localhost [127.0.0.1]) by ozlabs.org (Postfix) with ESMTP id 5115FDDF1C for ; Sat, 8 Nov 2008 01:16:10 +1100 (EST) X-Original-To: linuxppc-dev@ozlabs.org Delivered-To: linuxppc-dev@ozlabs.org Received: from ext-cn0ut-8.online-age.net (Ext-cn0ut-8.online-age.net [63.210.253.238]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "ext-cn0ut.online-age.net", Issuer "Savvis Communications Root CA" (not verified)) by ozlabs.org (Postfix) with ESMTPS id 64825DDDEE for ; Sat, 8 Nov 2008 01:15:27 +1100 (EST) Received: from int-cn0ut-2.online-age.net (int-cn0ut-2.online-age.net [3.159.252.71]) by ext-cn0ut-8.online-age.net (8.13.6/8.13.6/20051114-SVVS-TLS-DNSBL) with ESMTP id mA7EDSSL026286 for ; Fri, 7 Nov 2008 09:13:28 -0500 Received: from alpmlip01.e2k.ad.ge.com (int-cn0ut-2.online-age.net [3.159.252.71]) by int-cn0ut-2.online-age.net (8.13.6/8.13.6/20050510-SVVS) with ESMTP id mA7EFFxc011297 for ; Fri, 7 Nov 2008 09:15:15 -0500 Received: from ind-3n4b83jh1.amer.consind.ge.com (HELO ubuntu8041.localdomain) ([3.138.54.81]) by alpmlip01.e2k.ad.ge.com with ESMTP; 07 Nov 2008 09:15:14 -0500 Received: from ubuntu8041.localdomain (localhost [127.0.0.1]) by ubuntu8041.localdomain (Postfix) with ESMTP id 5A6055E132; Fri, 7 Nov 2008 14:15:42 +0000 (GMT) From: Martyn Welch Subject: [PATCH v4] powerpc: Basic GPIO support for GE Fanuc SBC610 To: linuxppc-dev@ozlabs.org Date: Fri, 07 Nov 2008 14:15:42 +0000 Message-ID: <20081107141414.8523.68990.stgit@ubuntu8041.localdomain> User-Agent: StGIT/0.13 MIME-Version: 1.0 Cc: paulus@samba.org X-BeenThere: linuxppc-dev@ozlabs.org X-Mailman-Version: 2.1.11 Precedence: list List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@ozlabs.org Errors-To: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@ozlabs.org Basic support for the GPIO available on the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This patch adds basic support for the GPIO in the devices I/O FPGA, the GPIO functionality is exposed through the AFIX pins on the backplane, unless used by an AFIX card. This code currently does not support switching between totem-pole and open-drain outputs (when used as outputs, GPIOs default to totem-pole). The interrupt capabilites of the GPIO lines is also not currently supported. Signed-off-by: Martyn Welch --- Anton: Thank you for your fast response. Changes since version 3: * Removed repetitive and obvious comments * Removed stray empty line arch/powerpc/boot/dts/gef_sbc610.dts | 6 + arch/powerpc/platforms/86xx/Kconfig | 2 arch/powerpc/platforms/86xx/Makefile | 3 - arch/powerpc/platforms/86xx/gef_gpio.c | 143 ++++++++++++++++++++++++++++++++ 4 files changed, 153 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 6ed6083..fd2b606 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -98,6 +98,12 @@ interrupt-parent = <&mpic>; }; + gef_gpio: gpio@7,14000 { + #gpio-cells = <2>; + compatible = "gef,sbc610-gpio"; + reg = <0x7 0x14000 0x24>; + gpio-controller; + }; }; soc@fef00000 { diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 77dd797..8e56939 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -34,6 +34,8 @@ config MPC8610_HPCD config GEF_SBC610 bool "GE Fanuc SBC610" select DEFAULT_UIMAGE + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select HAS_RAPIDIO help This option enables support for GE Fanuc's SBC610. diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index 4a56ff6..31e540c 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o obj-$(CONFIG_SBC8641D) += sbc8641d.o obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o -obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o +gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o +obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o $(gef-gpio-y) diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c new file mode 100644 index 0000000..85b2800 --- /dev/null +++ b/arch/powerpc/platforms/86xx/gef_gpio.c @@ -0,0 +1,143 @@ +/* + * Driver for GE Fanuc's FPGA based GPIO pins + * + * Author: Martyn Welch + * + * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* TODO + * + * Configuration of output modes (totem-pole/open-drain) + * Interrupt configuration - interrupts are always generated the FPGA relies on + * the I/O interrupt controllers mask to stop them propergating + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define GEF_GPIO_DIRECT 0x00 +#define GEF_GPIO_IN 0x04 +#define GEF_GPIO_OUT 0x08 +#define GEF_GPIO_TRIG 0x0C +#define GEF_GPIO_POLAR_A 0x10 +#define GEF_GPIO_POLAR_B 0x14 +#define GEF_GPIO_INT_STAT 0x18 +#define GEF_GPIO_OVERRUN 0x1C +#define GEF_GPIO_MODE 0x20 + +#define NUM_GPIO 19 + +static void _gef_gpio_set(void __iomem *reg, unsigned int offset, int value) +{ + unsigned int data; + + data = ioread32be(reg); + /* value: 0=low; 1=high */ + if (value & 0x1) + data = data | (0x1 << offset); + else + data = data & ~(0x1 << offset); + + iowrite32be(data, reg); +} + + +static int gef_gpio_dir_in(struct gpio_chip *chip, unsigned offset) +{ + unsigned int data; + struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); + + data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); + data = data | (0x1 << offset); + iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); + + return 0; +} + +static int gef_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) +{ + unsigned int data; + struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); + + /* Set direction before switching to input */ + _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); + + data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); + data = data & ~(0x1 << offset); + iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); + + return 0; +} + +static int gef_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + unsigned int data; + int state = 0; + struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); + + data = ioread32be(mmchip->regs + GEF_GPIO_IN); + state = (int)((data >> offset) & 0x1); + + return state; +} + +static void gef_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); + + _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); +} + +static int __init gef_gpio_init(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "gef,sbc610-gpio") { + int retval; + struct of_mm_gpio_chip *gef_gpio_chip; + + pr_debug("%s: Initialising GEF GPIO\n", np->full_name); + + /* Allocate chip structure */ + gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); + if (!gef_gpio_chip) { + pr_err("%s: Unable to allocate structure\n", + np->full_name); + continue; + } + + /* Setup pointers to chip functions */ + gef_gpio_chip->of_gc.gpio_cells = 2; + gef_gpio_chip->of_gc.gc.ngpio = NUM_GPIO; + gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in; + gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out; + gef_gpio_chip->of_gc.gc.get = gef_gpio_get; + gef_gpio_chip->of_gc.gc.set = gef_gpio_set; + + /* This function adds a memory mapped GPIO chip */ + retval = of_mm_gpiochip_add(np, gef_gpio_chip); + if (retval) { + kfree(gef_gpio_chip); + pr_err("%s: Unable to add GPIO\n", np->full_name); + } + } + + return 0; +}; +arch_initcall(gef_gpio_init); + +MODULE_DESCRIPTION("GE Fanuc I/O FPGA GPIO driver"); +MODULE_AUTHOR("Martyn Welch