@@ -17,10 +17,22 @@
#include <linux/kexec.h>
#include <linux/of_fdt.h>
#include <linux/libfdt.h>
+#include <linux/of_device.h>
#include <linux/memblock.h>
+#include <linux/slab.h>
+#include <asm/drmem.h>
#include <asm/kexec_ranges.h>
#include <asm/crashdump-ppc64.h>
+struct umem_info {
+ uint64_t *buf; /* data buffer for usable-memory property */
+ uint32_t idx; /* current index */
+ uint32_t size; /* size allocated for the data buffer */
+
+ /* usable memory ranges to look up */
+ const struct crash_mem *umrngs;
+};
+
const struct kexec_file_ops * const kexec_file_loaders[] = {
&kexec_elf64_ops,
NULL
@@ -76,6 +88,38 @@ static int get_exclude_memory_ranges(struct crash_mem **mem_ranges)
}
/**
+ * get_usable_memory_ranges - Get usable memory ranges. This list includes
+ * regions like crashkernel, opal/rtas & tce-table,
+ * that kdump kernel could use.
+ * @mem_ranges: Range list to add the memory ranges to.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int get_usable_memory_ranges(struct crash_mem **mem_ranges)
+{
+ int ret;
+
+ /* First memory block & crashkernel region */
+ ret = add_mem_range(mem_ranges, 0, crashk_res.end + 1);
+ if (ret)
+ goto out;
+
+ ret = add_rtas_mem_range(mem_ranges);
+ if (ret)
+ goto out;
+
+ ret = add_opal_mem_range(mem_ranges);
+ if (ret)
+ goto out;
+
+ ret = add_tce_mem_ranges(mem_ranges);
+out:
+ if (ret)
+ pr_err("Failed to setup usable memory ranges\n");
+ return ret;
+}
+
+/**
* __locate_mem_hole_top_down - Looks top down for a large enough memory hole
* in the memory regions between buf_min & buf_max
* for the buffer. If found, sets kbuf->mem.
@@ -261,6 +305,322 @@ static int locate_mem_hole_bottom_up_ppc64(struct kexec_buf *kbuf,
}
/**
+ * check_realloc_usable_mem - Reallocate buffer if it can't accommodate entries
+ * @um_info: Usable memory buffer and ranges info.
+ * @cnt: No. of entries to accommodate.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static uint64_t *check_realloc_usable_mem(struct umem_info *um_info, int cnt)
+{
+ void *tbuf;
+
+ if (um_info->size >=
+ ((um_info->idx + cnt) * sizeof(*(um_info->buf))))
+ return um_info->buf;
+
+ um_info->size += MEM_RANGE_CHUNK_SZ;
+ tbuf = krealloc(um_info->buf, um_info->size, GFP_KERNEL);
+ if (!tbuf) {
+ um_info->size -= MEM_RANGE_CHUNK_SZ;
+ return NULL;
+ }
+
+ memset(tbuf + um_info->idx, 0, MEM_RANGE_CHUNK_SZ);
+ return tbuf;
+}
+
+/**
+ * add_usable_mem - Add the usable memory ranges within the given memory range
+ * to the buffer
+ * @um_info: Usable memory buffer and ranges info.
+ * @base: Base address of memory range to look for.
+ * @end: End address of memory range to look for.
+ * @cnt: No. of usable memory ranges added to buffer.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int add_usable_mem(struct umem_info *um_info, uint64_t base,
+ uint64_t end, int *cnt)
+{
+ uint64_t loc_base, loc_end, *buf;
+ const struct crash_mem *umrngs;
+ int i, add;
+
+ *cnt = 0;
+ umrngs = um_info->umrngs;
+ for (i = 0; i < umrngs->nr_ranges; i++) {
+ add = 0;
+ loc_base = umrngs->ranges[i].start;
+ loc_end = umrngs->ranges[i].end;
+ if (loc_base >= base && loc_end <= end)
+ add = 1;
+ else if (base < loc_end && end > loc_base) {
+ if (loc_base < base)
+ loc_base = base;
+ if (loc_end > end)
+ loc_end = end;
+ add = 1;
+ }
+
+ if (add) {
+ buf = check_realloc_usable_mem(um_info, 2);
+ if (!buf)
+ return -ENOMEM;
+
+ um_info->buf = buf;
+ buf[um_info->idx++] = cpu_to_be64(loc_base);
+ buf[um_info->idx++] =
+ cpu_to_be64(loc_end - loc_base + 1);
+ (*cnt)++;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * kdump_setup_usable_lmb - This is a callback function that gets called by
+ * walk_drmem_lmbs for every LMB to set its
+ * usable memory ranges.
+ * @lmb: LMB info.
+ * @usm: linux,drconf-usable-memory property value.
+ * @data: Pointer to usable memory buffer and ranges info.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int kdump_setup_usable_lmb(struct drmem_lmb *lmb, const __be32 **usm,
+ void *data)
+{
+ struct umem_info *um_info;
+ uint64_t base, end, *buf;
+ int cnt, tmp_idx, ret;
+
+ /*
+ * kdump load isn't supported on kernels already booted with
+ * linux,drconf-usable-memory property.
+ */
+ if (*usm) {
+ pr_err("Trying kdump load from a kdump kernel?\n");
+ return -EINVAL;
+ }
+
+ um_info = data;
+ tmp_idx = um_info->idx;
+ buf = check_realloc_usable_mem(um_info, 1);
+ if (!buf)
+ return -ENOMEM;
+
+ um_info->idx++;
+ um_info->buf = buf;
+ base = lmb->base_addr;
+ end = base + drmem_lmb_size() - 1;
+ ret = add_usable_mem(um_info, base, end, &cnt);
+ if (!ret)
+ um_info->buf[tmp_idx] = cpu_to_be64(cnt);
+
+ return ret;
+}
+
+/**
+ * get_node_path - Get the full path of the given node.
+ * @dn: Node.
+ * @path: Updated with the full path of the node.
+ *
+ * Returns nothing.
+ */
+static void get_node_path(struct device_node *dn, char *path)
+{
+ if (!dn)
+ return;
+
+ get_node_path(dn->parent, path);
+ sprintf(path, "/%s", dn->full_name);
+}
+
+/**
+ * get_node_pathlen - Get the full path length of the given node.
+ * @dn: Node.
+ *
+ * Returns the length of the full path of the node.
+ */
+static int get_node_pathlen(struct device_node *dn)
+{
+ int len = 0;
+
+ while (dn) {
+ len += strlen(dn->full_name) + 1;
+ dn = dn->parent;
+ }
+ len++;
+
+ return len;
+}
+
+/**
+ * add_usable_mem_property - Add usable memory property for the given
+ * memory node.
+ * @fdt: Flattened device tree for the kdump kernel.
+ * @dn: Memory node.
+ * @um_info: Usable memory buffer and ranges info.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int add_usable_mem_property(void *fdt, struct device_node *dn,
+ struct umem_info *um_info)
+{
+ int n_mem_addr_cells, n_mem_size_cells, node;
+ int i, len, ranges, cnt, ret;
+ uint64_t base, end, *buf;
+ const __be32 *prop;
+ char *pathname;
+
+ /* Allocate memory for node path */
+ pathname = kzalloc(ALIGN(get_node_pathlen(dn), 8), GFP_KERNEL);
+ if (!pathname)
+ return -ENOMEM;
+
+ /* Get the full path of the memory node */
+ get_node_path(dn, pathname);
+ pr_debug("Memory node path: %s\n", pathname);
+
+ /* Now that we know the path, find its offset in kdump kernel's fdt */
+ node = fdt_path_offset(fdt, pathname);
+ if (node < 0) {
+ pr_err("Malformed device tree: error reading %s\n",
+ pathname);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Get the address & size cells */
+ n_mem_addr_cells = of_n_addr_cells(dn);
+ n_mem_size_cells = of_n_size_cells(dn);
+ pr_debug("address cells: %d, size cells: %d\n", n_mem_addr_cells,
+ n_mem_size_cells);
+
+ um_info->idx = 0;
+ buf = check_realloc_usable_mem(um_info, 2);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ um_info->buf = buf;
+
+ prop = of_get_property(dn, "reg", &len);
+ if (!prop || len <= 0) {
+ ret = 0;
+ goto out;
+ }
+
+ /*
+ * "reg" property represents sequence of (addr,size) duples
+ * each representing a memory range.
+ */
+ ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
+
+ for (i = 0; i < ranges; i++) {
+ base = of_read_number(prop, n_mem_addr_cells);
+ prop += n_mem_addr_cells;
+ end = base + of_read_number(prop, n_mem_size_cells) - 1;
+
+ ret = add_usable_mem(um_info, base, end, &cnt);
+ if (ret) {
+ ret = ret;
+ goto out;
+ }
+ }
+
+ /*
+ * No kdump kernel usable memory found in this memory node.
+ * Write (0,0) duple in linux,usable-memory property for
+ * this region to be ignored.
+ */
+ if (um_info->idx == 0) {
+ um_info->buf[0] = 0;
+ um_info->buf[1] = 0;
+ um_info->idx = 2;
+ }
+
+ ret = fdt_setprop(fdt, node, "linux,usable-memory", um_info->buf,
+ (um_info->idx * sizeof(*(um_info->buf))));
+
+out:
+ kfree(pathname);
+ return ret;
+}
+
+
+/**
+ * update_usable_mem_fdt - Updates kdump kernel's fdt with linux,usable-memory
+ * and linux,drconf-usable-memory DT properties as
+ * appropriate to restrict its memory usage.
+ * @fdt: Flattened device tree for the kdump kernel.
+ * @usable_mem: Usable memory ranges for kdump kernel.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int update_usable_mem_fdt(void *fdt, struct crash_mem *usable_mem)
+{
+ struct umem_info um_info;
+ struct device_node *dn;
+ int node, ret = 0;
+
+ if (!usable_mem) {
+ pr_err("Usable memory ranges for kdump kernel not found\n");
+ return -ENOENT;
+ }
+
+ node = fdt_path_offset(fdt, "/ibm,dynamic-reconfiguration-memory");
+ if (node == -FDT_ERR_NOTFOUND)
+ pr_debug("No dynamic reconfiguration memory found\n");
+ else if (node < 0) {
+ pr_err("Malformed device tree: error reading /ibm,dynamic-reconfiguration-memory.\n");
+ return -EINVAL;
+ }
+
+ um_info.size = 0;
+ um_info.idx = 0;
+ um_info.buf = NULL;
+ um_info.umrngs = usable_mem;
+
+ dn = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+ if (dn) {
+ ret = walk_drmem_lmbs(dn, &um_info, kdump_setup_usable_lmb);
+ of_node_put(dn);
+
+ if (ret)
+ goto out;
+
+ ret = fdt_setprop(fdt, node, "linux,drconf-usable-memory",
+ um_info.buf,
+ (um_info.idx * sizeof(*(um_info.buf))));
+ if (ret) {
+ pr_err("Failed to set linux,drconf-usable-memory property");
+ goto out;
+ }
+ }
+
+ /*
+ * Walk through each memory node and set linux,usable-memory property
+ * for the corresponding node in kdump kernel's fdt.
+ */
+ for_each_node_by_type(dn, "memory") {
+ ret = add_usable_mem_property(fdt, dn, &um_info);
+ if (ret) {
+ pr_err("Failed to set linux,usable-memory property for %s node",
+ dn->full_name);
+ goto out;
+ }
+ }
+
+out:
+ kfree(um_info.buf);
+ return ret;
+}
+
+/**
* setup_purgatory_ppc64 - initialize PPC64 specific purgatory's global
* variables and call setup_purgatory() to initialize
* common global variable.
@@ -281,6 +641,25 @@ int setup_purgatory_ppc64(struct kimage *image, const void *slave_code,
ret = setup_purgatory(image, slave_code, fdt, kernel_load_addr,
fdt_load_addr);
if (ret)
+ goto out;
+
+ if (image->type == KEXEC_TYPE_CRASH) {
+ uint32_t my_run_at_load = 1;
+
+ /*
+ * Tell relocatable kernel to run at load address
+ * via the word meant for that at 0x5c.
+ */
+ ret = kexec_purgatory_get_set_symbol(image, "run_at_load",
+ &my_run_at_load,
+ sizeof(my_run_at_load),
+ false);
+ if (ret)
+ goto out;
+ }
+
+out:
+ if (ret)
pr_err("Failed to setup purgatory symbols");
return ret;
}
@@ -301,6 +680,7 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
unsigned long initrd_load_addr,
unsigned long initrd_len, const char *cmdline)
{
+ struct crash_mem *umem = NULL;
int chosen_node, ret;
/* Remove memory reservation for the current device tree. */
@@ -313,15 +693,32 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
return ret;
}
+ /*
+ * Restrict memory usage for kdump kernel by setting up
+ * usable memory ranges.
+ */
+ if (image->type == KEXEC_TYPE_CRASH) {
+ ret = get_usable_memory_ranges(&umem);
+ if (ret)
+ goto out;
+
+ ret = update_usable_mem_fdt(fdt, umem);
+ if (ret) {
+ pr_err("Error setting up usable-memory property for kdump kernel\n");
+ goto out;
+ }
+ }
+
ret = setup_new_fdt(image, fdt, initrd_load_addr, initrd_len,
cmdline, &chosen_node);
if (ret)
- return ret;
+ goto out;
ret = fdt_setprop(fdt, chosen_node, "linux,booted-from-kexec", NULL, 0);
if (ret)
pr_err("Failed to update device-tree with linux,booted-from-kexec\n");
-
+out:
+ kfree(umem);
return ret;
}
Kdump kernel, used for capturing the kernel core image, is supposed to use only specific memory regions to avoid corrupting the image to be captured. The regions are crashkernel range - the memory reserved explicitly for kdump kernel, memory used for the tce-table, the OPAL region and RTAS region as applicable. Restrict kdump kernel memory to use only these regions by setting up usable-memory DT property. Also, tell the kdump kernel to run at the loaded address by setting the magic word at 0x5c. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> --- Changes in v2: * Fixed off-by-one error while setting up usable-memory properties. * Updated add_rtas_mem_range() & add_opal_mem_range() callsites based on the new prototype for these functions. arch/powerpc/kexec/file_load_64.c | 401 +++++++++++++++++++++++++++++++++++++ 1 file changed, 399 insertions(+), 2 deletions(-)