@@ -2,7 +2,7 @@
TEST_PROGS := ptrace-gpr ptrace-tm-gpr ptrace-tm-spd-gpr \
ptrace-tar ptrace-tm-tar ptrace-tm-spd-tar ptrace-vsx ptrace-tm-vsx \
ptrace-tm-spd-vsx ptrace-tm-spr ptrace-hwbreak ptrace-pkey core-pkey \
- perf-hwbreak
+ perf-hwbreak ptrace-syscall
include ../../lib.mk
new file mode 100644
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * A ptrace test for testing PTRACE_SYSEMU, PTRACE_SETREGS and
+ * PTRACE_GETREG. This test basically create a child process that executes
+ * syscalls and the parent process check if it is being traced appropriated.
+ *
+ * This test is heavily based on tools/testing/selftests/x86/ptrace_syscall.c
+ * test, and it was adapted to run on Powerpc by
+ * Breno Leitao <leitao@debian.org>
+ */
+#define _GNU_SOURCE
+
+#include <sys/ptrace.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <sys/syscall.h>
+#include <sys/user.h>
+#include <unistd.h>
+#include <errno.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <err.h>
+#include <string.h>
+#include <sys/auxv.h>
+#include "utils.h"
+
+/* Bitness-agnostic defines for user_regs_struct fields. */
+#define user_syscall_nr gpr[0]
+#define user_arg0 gpr[3]
+#define user_arg1 gpr[4]
+#define user_arg2 gpr[5]
+#define user_arg3 gpr[6]
+#define user_arg4 gpr[7]
+#define user_arg5 gpr[8]
+#define user_ip nip
+
+#define PTRACE_SYSEMU 0x1d
+
+static int nerrs;
+
+static void wait_trap(pid_t chld)
+{
+ siginfo_t si;
+
+ if (waitid(P_PID, chld, &si, WEXITED|WSTOPPED) != 0)
+ err(1, "waitid");
+ if (si.si_pid != chld)
+ errx(1, "got unexpected pid in event\n");
+ if (si.si_code != CLD_TRAPPED)
+ errx(1, "got unexpected event type %d\n", si.si_code);
+}
+
+static void test_ptrace_syscall_restart(void)
+{
+ int status;
+ struct pt_regs regs;
+ pid_t chld;
+
+ printf("[RUN]\tptrace-induced syscall restart\n");
+
+ chld = fork();
+ if (chld < 0)
+ err(1, "fork");
+
+ /*
+ * Child process is running 4 syscalls after ptrace.
+ *
+ * 1) getpid()
+ * 2) gettid()
+ * 3) tgkill() -> Send SIGSTOP
+ * 4) gettid() -> Where the tests will happen essentially
+ */
+ if (chld == 0) {
+ if (ptrace(PTRACE_TRACEME, 0, 0, 0) != 0)
+ err(1, "PTRACE_TRACEME");
+
+ pid_t pid = getpid(), tid = syscall(SYS_gettid);
+
+ printf("\tChild will make one syscall\n");
+ syscall(SYS_tgkill, pid, tid, SIGSTOP);
+
+ syscall(SYS_gettid, 10, 11, 12, 13, 14, 15);
+ _exit(0);
+ }
+ /* Parent process below */
+
+ /* Wait for SIGSTOP sent by tgkill above. */
+ if (waitpid(chld, &status, 0) != chld || !WIFSTOPPED(status))
+ err(1, "waitpid");
+
+ printf("[RUN]\tSYSEMU\n");
+ if (ptrace(PTRACE_SYSEMU, chld, 0, 0) != 0)
+ err(1, "PTRACE_SYSEMU");
+ wait_trap(chld);
+
+ if (ptrace(PTRACE_GETREGS, chld, 0, ®s) != 0)
+ err(1, "PTRACE_GETREGS");
+
+ /*
+ * Ptrace trapped prior to executing the syscall, thus r3 still has
+ * the syscall number instead of the sys_gettid() result
+ */
+ if (regs.user_syscall_nr != SYS_gettid ||
+ regs.user_arg0 != 10 || regs.user_arg1 != 11 ||
+ regs.user_arg2 != 12 || regs.user_arg3 != 13 ||
+ regs.user_arg4 != 14 || regs.user_arg5 != 15) {
+ printf("[FAIL]\tInitial args are wrong (nr=%lu, args=%lu %lu %lu %lu %lu %lu)\n",
+ (unsigned long)regs.user_syscall_nr,
+ (unsigned long)regs.user_arg0,
+ (unsigned long)regs.user_arg1,
+ (unsigned long)regs.user_arg2,
+ (unsigned long)regs.user_arg3,
+ (unsigned long)regs.user_arg4,
+ (unsigned long)regs.user_arg5);
+ nerrs++;
+ } else {
+ printf("[OK]\tInitial nr and args are correct\n"); }
+
+ printf("[RUN]\tRestart the syscall (ip = 0x%lx)\n",
+ (unsigned long)regs.user_ip);
+
+ /*
+ * Rewind to retry the same syscall again. This will basically test
+ * the rewind process together with PTRACE_SETREGS and PTRACE_GETREGS.
+ */
+ regs.user_ip -= 4;
+ if (ptrace(PTRACE_SETREGS, chld, 0, ®s) != 0)
+ err(1, "PTRACE_SETREGS");
+
+ if (ptrace(PTRACE_SYSEMU, chld, 0, 0) != 0)
+ err(1, "PTRACE_SYSEMU");
+ wait_trap(chld);
+
+ if (ptrace(PTRACE_GETREGS, chld, 0, ®s) != 0)
+ err(1, "PTRACE_GETREGS");
+
+ if (regs.user_syscall_nr != SYS_gettid ||
+ regs.user_arg0 != 10 || regs.user_arg1 != 11 ||
+ regs.user_arg2 != 12 || regs.user_arg3 != 13 ||
+ regs.user_arg4 != 14 || regs.user_arg5 != 15) {
+ printf("[FAIL]\tRestart nr or args are wrong (nr=%lu, args=%lu %lu %lu %lu %lu %lu)\n",
+ (unsigned long)regs.user_syscall_nr,
+ (unsigned long)regs.user_arg0,
+ (unsigned long)regs.user_arg1,
+ (unsigned long)regs.user_arg2,
+ (unsigned long)regs.user_arg3,
+ (unsigned long)regs.user_arg4,
+ (unsigned long)regs.user_arg5);
+ nerrs++;
+ } else {
+ printf("[OK]\tRestarted nr and args are correct\n");
+ }
+
+ printf("[RUN]\tChange nr and args and restart the syscall (ip = 0x%lx)\n",
+ (unsigned long)regs.user_ip);
+
+ /*
+ * Inject a new syscall (getpid) in the same place the previous
+ * syscall (gettid), rewind and re-execute.
+ */
+ regs.user_syscall_nr = SYS_getpid;
+ regs.user_arg0 = 20;
+ regs.user_arg1 = 21;
+ regs.user_arg2 = 22;
+ regs.user_arg3 = 23;
+ regs.user_arg4 = 24;
+ regs.user_arg5 = 25;
+ regs.user_ip -= 4;
+
+ if (ptrace(PTRACE_SETREGS, chld, 0, ®s) != 0)
+ err(1, "PTRACE_SETREGS");
+
+ if (ptrace(PTRACE_SYSEMU, chld, 0, 0) != 0)
+ err(1, "PTRACE_SYSEMU");
+ wait_trap(chld);
+
+ if (ptrace(PTRACE_GETREGS, chld, 0, ®s) != 0)
+ err(1, "PTRACE_GETREGS");
+
+ /* Check that ptrace stopped at the new syscall that was
+ * injected, and guarantee that it haven't executed, i.e, user_args
+ * contain the arguments and not the syscall return value, for
+ * instance.
+ */
+ if (regs.user_syscall_nr != SYS_getpid
+ || regs.user_arg0 != 20 || regs.user_arg1 != 21
+ || regs.user_arg2 != 22 || regs.user_arg3 != 23
+ || regs.user_arg4 != 24 || regs.user_arg5 != 25) {
+
+ printf("[FAIL]\tRestart nr or args are wrong (nr=%lu, args=%lu %lu %lu %lu %lu %lu)\n",
+ (unsigned long)regs.user_syscall_nr,
+ (unsigned long)regs.user_arg0,
+ (unsigned long)regs.user_arg1,
+ (unsigned long)regs.user_arg2,
+ (unsigned long)regs.user_arg3,
+ (unsigned long)regs.user_arg4,
+ (unsigned long)regs.user_arg5);
+ nerrs++;
+ } else {
+ printf("[OK]\tReplacement nr and args are correct\n");
+ }
+
+ if (ptrace(PTRACE_CONT, chld, 0, 0) != 0)
+ err(1, "PTRACE_CONT");
+
+ if (waitpid(chld, &status, 0) != chld)
+ err(1, "waitpid");
+
+ /* Guarantee that the process executed properly, returning 0 */
+ if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) {
+ printf("[FAIL]\tChild failed\n");
+ nerrs++;
+ } else {
+ printf("[OK]\tChild exited cleanly\n");
+ }
+}
+
+int ptrace_syscall(void)
+{
+ test_ptrace_syscall_restart();
+
+ return nerrs;
+}
+
+int main(void)
+{
+ return test_harness(ptrace_syscall, "ptrace_syscall");
+}
This patch adds a new test for the new PTRACE_SYSEMU ptrace request. This test also relies on PTRACE_GETREGS and PTRACE_SETREGS requests to run properly, since the trace instruction (gettid() syscall) is being modified at run-time (by PTRACE_SETREGS) and re-executed three times. PTRACE_GETREGS is being used to check that the registers are still sane. This test basically creates a child process that executes syscalls and the parent process check if it is being traced appropriately. The parent process guarantees that the SYSCALLs are being traced, with PTRACE_SYSEMU, and ptrace stops the child application before a syscall is executed. The way the tests validates it, is by guaranteeing that the system calls arguments, as argv[0] (r3) which is the same register that will have the syscall return value on powerpc, are not being corrupted on PTRACE_SYSEMU with a return value, i.e, it continues to have the current arguments instead, meaning that the registers where not clobbered. This test is basically the same test for x86 located at tools/testing/selftests/x86/ptrace_syscall.c, limited to test PTRACE_SYSEMU request, and ported to PowerPC. Signed-off-by: Breno Leitao <leitao@debian.org> --- .../testing/selftests/powerpc/ptrace/Makefile | 2 +- .../selftests/powerpc/ptrace/ptrace-syscall.c | 228 ++++++++++++++++++ 2 files changed, 229 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/powerpc/ptrace/ptrace-syscall.c