diff mbox

[29/37] PCI: dwc: dra7xx: Workaround for errata id i870

Message ID 1484216786-17292-30-git-send-email-kishon@ti.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Kishon Vijay Abraham I Jan. 12, 2017, 10:26 a.m. UTC
According to errata i870, access to the PCIe slave port
that are not 32-bit aligned will result in incorrect mapping
to TLP Address and Byte enable fields.

Accessing non 32-bit aligned data causes incorrect data in the target
buffer if memcpy is used. Implement the workaround for this
errata here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/dwc/pci-dra7xx.c |   50 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
diff mbox

Patch

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index 333aa56..7666e3e 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -26,6 +26,8 @@ 
 #include <linux/pm_runtime.h>
 #include <linux/resource.h>
 #include <linux/types.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #include "pcie-designware.h"
 
@@ -531,6 +533,48 @@  static int dra7xx_pcie_enable_phy(struct dra7xx_pcie *dra7xx)
 	{},
 };
 
+/*
+ * dra7xx_pcie_ep_legacy_mode: workaround for AM572x/AM571x Errata i870
+ * @dra7xx: the dra7xx device where the workaround should be applied
+ *
+ * Access to the PCIe slave port that are not 32-bit aligned will result
+ * in incorrect mapping to TLP Address and Byte enable fields. Therefore,
+ * byte and half-word accesses are not possible to byte offset 0x1, 0x2, or
+ * 0x3.
+ *
+ * To avoid this issue set PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE to 1.
+ */
+static int dra7xx_pcie_ep_legacy_mode(struct device *dev)
+{
+	int ret;
+	struct device_node *np = dev->of_node;
+	struct regmap *regmap;
+	unsigned int reg;
+	unsigned int field;
+
+	regmap = syscon_regmap_lookup_by_phandle(np, "syscon-legacy-mode");
+	if (IS_ERR(regmap)) {
+		dev_dbg(dev, "can't get syscon-legacy-mode\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_index(np, "syscon-legacy-mode", 1, &reg)) {
+		dev_err(dev, "couldn't get legacy mode register offset\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_index(np, "syscon-legacy-mode", 2, &field)) {
+		dev_err(dev, "can't get bit field for setting legacy mode\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(regmap, reg, field, field);
+	if (ret)
+		dev_err(dev, "failed to set legacy mode\n");
+
+	return ret;
+}
+
 static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 {
 	u32 reg;
@@ -643,6 +687,7 @@  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	case DW_PCIE_RC_TYPE:
 		dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
 				   DEVICE_TYPE_RC);
+
 		ret = dra7xx_add_pcie_port(dra7xx, pdev);
 		if (ret < 0)
 			goto err_gpio;
@@ -650,6 +695,11 @@  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	case DW_PCIE_EP_TYPE:
 		dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
 				   DEVICE_TYPE_EP);
+
+		ret = dra7xx_pcie_ep_legacy_mode(dev);
+		if (ret)
+			goto err_gpio;
+
 		ret = dra7xx_add_pcie_ep(dra7xx, pdev);
 		if (ret < 0)
 			goto err_gpio;