Message ID | 1437377539-15911-1-git-send-email-qiang.zhao@freescale.com (mailing list archive) |
---|---|
State | Changes Requested |
Delegated to: | Scott Wood |
Headers | show |
On Mon, 2015-07-20 at 15:32 +0800, Zhao Qiang wrote: > From: Zhao Qiang <B45475@freescale.com> > > p1010rdb-pb use the irq[4:5] for inta and intb to pcie, > it is active-high, so set it. What about revisions of p1010rdb other than pb? > Signed-off-by: Zhao Qiang <B45475@freescale.com> > Change-Id: I29db41b4a8b5a67c18151099884edda6de4d9d1a > Reviewed-on: http://git.am.freescale.net:8181/9915 > Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> > Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> > Reviewed-by: Jose Rivera <German.Rivera@freescale.com> Get rid of the gerrit crud. -Scott
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index 1804ed7..4313ff6 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -59,8 +59,12 @@ interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + /* + *irq[4:5] only for PCIe in dts, set to active-high + *irq[6:7] is pulled up on board, set to active-low + */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 >;