@@ -218,3 +218,4 @@
};
/include/ "fsl/b4si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res3.dtsi"
new file mode 100644
@@ -0,0 +1,77 @@
+/*
+ * QorIQ DPAA resources device tree stub [ FQIDs, BPIDs ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* These stubs are required to alloc qbman drivers to determine what ranges of
+ * resources are available for dynamic allocation, primarily because there are
+ * some legacy "a priori" assumptions in certain subsystems (eg. networking)
+ * that certain resources are reserved for their use. When those drivers (and in
+ * some cases, their corresponding device-tree nodes) are updated to dynamically
+ * allocate their resources, then *all* resources can be managed by the
+ * allocators and there may be no further need to define these stubs.
+ *
+ * A couple of qualifiers to the above statement though:
+ *
+ * - Some resource ranges are hardware-specific, rather than being defined by
+ * software memory allocation choices. Eg. the number of available BPIDs is
+ * baked into silicon and so will probably always need to be expressed in the
+ * device-tree, though in that case it will express all BPIDs, not just those
+ * available for dynamic allocation.
+ *
+ * - Even for memory-backed resources that are software determined (FQIDs), this
+ * information may only be configured and available on the control-plane
+ * partition that manages the device, so in AMP or hypervised scenarios there
+ * may still be need to a way to provide allocation ranges. Ie. for O/S
+ * instances that don't know how many resources are available to hardware, and
+ * possibly even for O/S instances that do know how many are available but
+ * that should not "own" all of them.
+ */
+
+&qportals {
+ qman-fqids@0 {
+ compatible = "fsl,fqid-range";
+ fsl,fqid-range = <256 256>;
+ };
+ qman-fqids@1 {
+ compatible = "fsl,fqid-range";
+ fsl,fqid-range = <32768 32768>;
+ };
+ qman-pools@0 {
+ compatible = "fsl,pool-channel-range";
+ fsl,pool-channel-range = <0x21 0xf>;
+ };
+ qman-cgrids@0 {
+ compatible = "fsl,cgrid-range";
+ fsl,cgrid-range = <0 256>;
+ };
+};
new file mode 100644
@@ -0,0 +1,56 @@
+/*
+ * QorIQ DPAA resources device tree stub [ FQIDs, BPIDs ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* The comments in qoriq-dpaa-res1.dtsi apply here too so will not be repeated.
+ * This alternative file is to support p1023 which does not have the same
+ * resource ranges as other SoCs to date. */
+
+&qportals {
+ qman-fqids@0 {
+ compatible = "fsl,fqid-range";
+ fsl,fqid-range = <256 256>;
+ };
+ qman-fqids@1 {
+ compatible = "fsl,fqid-range";
+ fsl,fqid-range = <32768 32768>;
+ };
+ qman-pools@0 {
+ compatible = "fsl,pool-channel-range";
+ fsl,pool-channel-range = <0x21 0x3>;
+ };
+ qman-cgrids@0 {
+ compatible = "fsl,cgrid-range";
+ fsl,cgrid-range = <0 64>;
+ };
+};
new file mode 100644
@@ -0,0 +1,77 @@
+/*
+ * QorIQ DPAA resources device tree stub [ FQIDs, BPIDs ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* These stubs are required to alloc qbman drivers to determine what ranges of
+ * resources are available for dynamic allocation, primarily because there are
+ * some legacy "a priori" assumptions in certain subsystems (eg. networking)
+ * that certain resources are reserved for their use. When those drivers (and in
+ * some cases, their corresponding device-tree nodes) are updated to dynamically
+ * allocate their resources, then *all* resources can be managed by the
+ * allocators and there may be no further need to define these stubs.
+ *
+ * A couple of qualifiers to the above statement though:
+ *
+ * - Some resource ranges are hardware-specific, rather than being defined by
+ * software memory allocation choices. Eg. the number of available BPIDs is
+ * baked into silicon and so will probably always need to be expressed in the
+ * device-tree, though in that case it will express all BPIDs, not just those
+ * available for dynamic allocation.
+ *
+ * - Even for memory-backed resources that are software determined (FQIDs), this
+ * information may only be configured and available on the control-plane
+ * partition that manages the device, so in AMP or hypervised scenarios there
+ * may still be need to a way to provide allocation ranges. Ie. for O/S
+ * instances that don't know how many resources are available to hardware, and
+ * possibly even for O/S instances that do know how many are available but
+ * that should not "own" all of them.
+ */
+
+&qportals {
+ qman-fqids@0 {
+ compatible = "fsl,fqid-range";
+ fsl,fqid-range = <256 512>;
+ };
+ qman-fqids@1 {
+ compatible = "fsl,fqid-range";
+ fsl,fqid-range = <32768 32768>;
+ };
+ qman-pools@0 {
+ compatible = "fsl,pool-channel-range";
+ fsl,pool-channel-range = <0x401 0xf>;
+ };
+ qman-cgrids@0 {
+ compatible = "fsl,cgrid-range";
+ fsl,cgrid-range = <0 256>;
+ };
+};
@@ -165,3 +165,4 @@
};
/include/ "fsl/p2041si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res1.dtsi"
@@ -131,3 +131,4 @@
};
/include/ "fsl/p4080si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res1.dtsi"
@@ -246,3 +246,4 @@
};
/include/ "fsl/p1023si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res2.dtsi"
@@ -236,3 +236,4 @@
};
/include/ "fsl/p2041si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res1.dtsi"
@@ -270,3 +270,4 @@
};
/include/ "fsl/p3041si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res1.dtsi"
@@ -204,3 +204,4 @@
};
/include/ "fsl/p4080si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res1.dtsi"
@@ -270,3 +270,4 @@
};
/include/ "fsl/p5020si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res1.dtsi"
@@ -240,3 +240,4 @@
};
/include/ "fsl/p5040si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res1.dtsi"
@@ -179,3 +179,5 @@
};
};
};
+
+/include/ "fsl/qoriq-dpaa-res3.dtsi"
@@ -175,3 +175,5 @@
};
};
};
+
+/include/ "fsl/qoriq-dpaa-res3.dtsi"
@@ -263,3 +263,5 @@
};
};
};
+
+/include/ "fsl/qoriq-dpaa-res3.dtsi"
@@ -197,3 +197,5 @@
};
};
};
+
+/include/ "fsl/qoriq-dpaa-res3.dtsi"
@@ -296,3 +296,4 @@
};
/include/ "fsl/t4240si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res3.dtsi"
@@ -199,3 +199,4 @@
};
/include/ "fsl/t4240si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res3.dtsi"