@@ -193,9 +193,9 @@
fsl,liodn-bits = <12>;
};
- clockgen: global-utilities@e1000 {
+/include/ "fsl/qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
- reg = <0xe1000 0x1000>;
};
/include/ "fsl/qoriq-dma-0.dtsi"
@@ -80,33 +80,9 @@
compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
mux0: mux0@0 {
#clock-cells = <0>;
@@ -273,33 +273,9 @@
compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
mux0: mux0@0 {
#clock-cells = <0>;
@@ -313,53 +313,9 @@
#sleep-cells = <2>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen1.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
mux2: mux2@40 {
#clock-cells = <0>;
@@ -340,53 +340,9 @@
#sleep-cells = <2>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen1.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
mux2: mux2@40 {
#clock-cells = <0>;
@@ -360,35 +360,9 @@
#sleep-cells = <2>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen1.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
pll2: pll2@840 {
#clock-cells = <1>;
@@ -406,24 +380,6 @@
clock-output-names = "pll3", "pll3-div2";
};
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
-
mux2: mux2@40 {
#clock-cells = <0>;
reg = <0x40 0x4>;
@@ -345,53 +345,9 @@
#sleep-cells = <2>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen1.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
};
rcpm: global-utilities@e2000 {
@@ -305,53 +305,9 @@
#sleep-cells = <2>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen1.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
mux2: mux2@40 {
#clock-cells = <0>;
new file mode 100644
@@ -0,0 +1,78 @@
+/*
+ * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+global-utilities@e1000 {
+ compatible = "fsl,qoriq-clockgen-1.0";
+ ranges = <0x0 0xe1000 0x1000>;
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock";
+ clock-output-names = "sysclk";
+ };
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux0";
+ };
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux1";
+ };
+};
new file mode 100644
@@ -0,0 +1,61 @@
+/*
+ * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+global-utilities@e1000 {
+ compatible = "fsl,qoriq-clockgen-2.0";
+ ranges = <0x0 0xe1000 0x1000>;
+ reg = <0xe1000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock";
+ clock-output-names = "sysclk";
+ };
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+ };
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+ };
+};
@@ -432,35 +432,9 @@
fsl,liodn-bits = <12>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0";
- clock-output-names = "sysclk", "fixed-clock";
- };
-
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
mux0: mux0@0 {
#clock-cells = <0>;
@@ -553,34 +553,9 @@
fsl,liodn-bits = <12>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0";
- clock-output-names = "sysclk", "fixed-clock";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
mux0: mux0@0 {
#clock-cells = <0>;
@@ -1032,34 +1032,9 @@
fsl,liodn-bits = <12>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
pll2: pll2@840 {
#clock-cells = <1>;
@@ -250,9 +250,9 @@
fsl,liodn-bits = <12>;
};
- clockgen: global-utilities@e1000 {
+/include/ "fsl/qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
- reg = <0xe1000 0x1000>;
};
/include/ "fsl/qoriq-dma-0.dtsi"
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Change-Id: I25ce24a25862b4ca460164159867abefe00ccdd1 --- v2: Whitespace fixes arch/powerpc/boot/dts/b4860emu.dts | 4 +- arch/powerpc/boot/dts/fsl/b4420si-post.dtsi | 28 +-------- arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 28 +-------- arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 48 +--------------- arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 48 +--------------- arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 48 +--------------- arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 48 +--------------- arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 48 +--------------- arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi | 78 ++++++++++++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 61 ++++++++++++++++++++ arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 30 +--------- arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 29 +--------- arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 29 +--------- arch/powerpc/boot/dts/t4240emu.dts | 4 +- 14 files changed, 163 insertions(+), 368 deletions(-) create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi