@@ -1327,8 +1327,8 @@ static int bcm_sysport_open(struct net_device *dev)
/* Read CRC forward */
priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD);
- priv->phydev = of_phy_connect_fixed_link(dev, bcm_sysport_adj_link,
- priv->phy_interface);
+ priv->phydev = of_phy_connect(dev, priv->phy_dn, bcm_sysport_adj_link,
+ 0, priv->phy_interface);
if (!priv->phydev) {
netdev_err(dev, "could not attach to PHY\n");
return -ENODEV;
@@ -1551,6 +1551,19 @@ static int bcm_sysport_probe(struct platform_device *pdev)
if (priv->phy_interface < 0)
priv->phy_interface = PHY_INTERFACE_MODE_GMII;
+ /* In the case of a fixed PHY, the DT node associated
+ * to the PHY is the Ethernet MAC DT node.
+ */
+ if (of_phy_is_fixed_link(dn)) {
+ ret = of_phy_register_fixed_link(dn);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register fixed PHY\n");
+ goto err;
+ }
+
+ priv->phy_dn = dn;
+ }
+
/* Initialize netdevice members */
macaddr = of_get_mac_address(dn);
if (!macaddr || !is_valid_ether_addr(macaddr)) {
@@ -656,6 +656,7 @@ struct bcm_sysport_priv {
unsigned int rx_c_index;
/* PHY device */
+ struct device_node *phy_dn;
struct phy_device *phydev;
phy_interface_t phy_interface;
int old_pause;
of_phy_connect_fixed_link() is becoming obsolete, and also required platform code to register the fixed PHYs at the specified addresses for those to be usable. Get rid of it and use the new of_phy_is_fixed_link() plus of_phy_register_fixed_link() helpers to transition over the new scheme. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- No changes in v2 drivers/net/ethernet/broadcom/bcmsysport.c | 17 +++++++++++++++-- drivers/net/ethernet/broadcom/bcmsysport.h | 1 + 2 files changed, 16 insertions(+), 2 deletions(-)