[2/2] powerpc/85xx: add a 32-bit P1022DS device tree

Message ID	1322863714-6818-2-git-send-email-timur@freescale.com (mailing list archive)
State	Superseded, archived
Delegated to:	Kumar Gala
Headers	show Return-Path: <linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org> From: Timur Tabi <timur@freescale.com> To: <kumar.gala@freescale.com>, <linuxppc-dev@ozlabs.org> Subject: [PATCH 2/2] powerpc/85xx: add a 32-bit P1022DS device tree Date: Fri, 2 Dec 2011 16:08:34 -0600 Message-ID: <1322863714-6818-2-git-send-email-timur@freescale.com> In-Reply-To: <1322863714-6818-1-git-send-email-timur@freescale.com> References: <1322863714-6818-1-git-send-email-timur@freescale.com> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org Sender: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org

diff --git a/arch/powerpc/boot/dts/p1022ds_32b.dts b/arch/powerpc/boot/dts/p1022ds_32b.dts new file mode 100644 index 0000000..18787d9 --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds_32b.dts @@ -0,0 +1,270 @@ +/* + * P1022 DS 32-Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "fsl/p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0 0x1000>; + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xff800000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; + + /* + * This node is used to access the pixis via "indirect" mode, + * which is done by writing the pixis register index to chip + * select 0 and the value to/from chip select 1. Indirect + * mode is the only way to access the pixis when DIU video + * is enabled. Note that this assumes that the first column + * of the 'ranges' property above is the chip select number. + */ + board-control@0,0 { + compatible = "fsl,p1022ds-indirect-pixis"; + reg = <0x0 0x0 1 /* CS0 */ + 0x1 0x0 1>; /* CS1 */ + }; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + read-only; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + read-only; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "jffs2-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "jffs2-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x10000000>; + label = "ramdisk-nand"; + read-only; + }; + + partition@22000000 { + reg = <0x22000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@26000000 { + reg = <0x26000000 0x01000000>; + label = "dtb-nand"; + read-only; + }; + + partition@27000000 { + reg = <0x27000000 0x19000000>; + label = "reserved-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + interrupt-parent = <&mpic>; + /* + * IRQ8 is generated if the "EVENT" switch is pressed + * and PX_CTL[EVESEL] is set to 00. + */ + interrupts = <8 8 0 0>; + }; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3100 { + wm8776:codec@1a { + compatible = "wlf,wm8776"; + reg = <0x1a>; + /* + * clock-frequency will be set by U-Boot if + * the clock is enabled. + */ + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@0 { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@600000 { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@700000 { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + ssi@15000 { + fsl,mode = "i2s-slave"; + codec-handle = <&wm8776>; + fsl,ssi-asynchronous; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + status = "disabled"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1 0 0>; + reg = <0x2>; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0b000 { + reg = <0 0xffe0b000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1022si-post.dtsi"

[2/2] powerpc/85xx: add a 32-bit P1022DS device tree

Commit Message

Comments

Patch