@@ -21,7 +21,7 @@
reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
- 0x2 0x0 0xf 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xff800000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
/*
@@ -222,7 +222,7 @@
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
@@ -237,7 +237,7 @@
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -253,7 +253,7 @@
pci2: pcie@fffe0b000 {
reg = <0xf 0xffe0b000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
Fix the PCI buses in the 36-bit device tree for the P1022DS. It was using values copy-pasted from another device tree. Also fix the NAND localbus bus address from ffa00000 to ff800000, which is what U-boot sets it to. Signed-off-by: Timur Tabi <timur@freescale.com> --- arch/powerpc/boot/dts/p1022ds.dts | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)