@@ -1,3 +1,8 @@
+Freescale Reference Board Bindings
+
+This document describes device tree bindings for various devices that
+exist on some Freescale reference boards.
+
* Board Control and Status (BCSR)
Required properties:
@@ -12,25 +17,26 @@ Example:
reg = <f8000000 8000>;
};
-* Freescale on board FPGA
+* Freescale on-board FPGA
This is the memory-mapped registers for on board FPGA.
Required properities:
-- compatible : should be "fsl,fpga-pixis".
-- reg : should contain the address and the length of the FPPGA register
- set.
+- compatible: should be a board-specific string followed by a string
+ indicating the type of FPGA. Example:
+ "fsl,<board>-fpga", "fsl,fpga-pixis"
+- reg: should contain the address and the length of the FPGA register set.
- interrupt-parent: should specify phandle for the interrupt controller.
-- interrupts : should specify event (wakeup) IRQ.
+- interrupts: should specify event (wakeup) IRQ.
-Example (MPC8610HPCD):
+Example (P1022DS):
- board-control@e8000000 {
- compatible = "fsl,fpga-pixis";
- reg = <0xe8000000 32>;
- interrupt-parent = <&mpic>;
- interrupts = <8 8>;
- };
+ board-control@3,0 {
+ compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 8 0 0>;
+ };
* Freescale BCSR GPIO banks
@@ -150,7 +150,7 @@
};
board-control@3,0 {
- compatible = "fsl,p1022ds-pixis";
+ compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x30>;
interrupt-parent = <&mpic>;
/*
@@ -118,6 +118,11 @@
};
};
+ board-control@3,0 {
+ compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+ reg = <0x3 0x0 0x30>;
+ };
+
nand@4,0 {
compatible = "fsl,elbc-fcm-nand";
reg = <0x4 0x0 0x40000>;
@@ -147,8 +147,8 @@
};
board-control@3,0 {
- compatible = "fsl,p3041ds-pixis";
- reg = <3 0 0x20>;
+ compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
};
};
@@ -108,7 +108,8 @@
localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
- ranges = <0 0 0xf 0xe8000000 0x08000000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 3 0 0xf 0xffdf0000 0x00008000>;
flash@0,0 {
compatible = "cfi-flash";
@@ -116,6 +117,11 @@
bank-width = <2>;
device-width = <2>;
};
+
+ board-control@3,0 {
+ compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
+ };
};
pci0: pcie@ffe200000 {
@@ -147,8 +147,8 @@
};
board-control@3,0 {
- compatible = "fsl,p5020ds-pixis";
- reg = <3 0 0x20>;
+ compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
};
};
@@ -128,17 +128,20 @@ static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
*/
static void p1022ds_set_monitor_port(int monitor_port)
{
- struct device_node *pixis_node;
+ struct device_node *np;
void __iomem *pixis;
u8 __iomem *brdcfg1;
- pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
- if (!pixis_node) {
+ np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
+ if (!np)
+ /* older device trees used "fsl,p1022ds-pixis" */
+ np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
+ if (!np) {
pr_err("p1022ds: missing ngPIXIS node\n");
return;
}
- pixis = of_iomap(pixis_node, 0);
+ pixis = of_iomap(np, 0);
if (!pixis) {
pr_err("p1022ds: could not map ngPIXIS registers\n");
return;
Standarize and document the FPGA nodes used on Freescale QorIQ reference boards. There are different kinds of FPGAs used on the boards, but only two are currently standard: "pixis", "ngpixis", and "qixis". Although there are minor differences among the boards that have one kind of FPGA, most of the functionality is the same, so it makes sense to create common compatibility strings. We also need to update the P1022DS platform file, because the compatible string for its PIXIS node has changed. This means that older kernels are not compatible with newer device trees. This is not a real problem, however, since that particular function doesn't work anyway. When the DIU is active, the PIXIS is in "indirect mode", and so cannot be accessed as a memory-mapped device. Signed-off-by: Timur Tabi <timur@freescale.com> --- v3: added "ngpixis" to list v2: removed references to the CPLD This patch only adds "ngpixis" nodes, because that's the easiest. The P3060QDS device tree already has a qixis node. Support for older boards with the old "pixis" will be added later. .../devicetree/bindings/powerpc/fsl/board.txt | 30 ++++++++++++-------- arch/powerpc/boot/dts/p1022ds.dts | 2 +- arch/powerpc/boot/dts/p2020ds.dts | 5 +++ arch/powerpc/boot/dts/p3041ds.dts | 4 +- arch/powerpc/boot/dts/p4080ds.dts | 8 ++++- arch/powerpc/boot/dts/p5020ds.dts | 4 +- arch/powerpc/platforms/85xx/p1022_ds.c | 11 ++++-- 7 files changed, 42 insertions(+), 22 deletions(-)