From patchwork Tue Mar 22 08:27:27 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Schocher X-Patchwork-Id: 87878 X-Patchwork-Delegate: grant.likely@secretlab.ca Return-Path: X-Original-To: patchwork-incoming@ozlabs.org Delivered-To: patchwork-incoming@ozlabs.org Received: from ozlabs.org (localhost [127.0.0.1]) by ozlabs.org (Postfix) with ESMTP id 4EAA0101953 for ; Tue, 22 Mar 2011 19:37:13 +1100 (EST) Received: from mail-out.m-online.net (mail-out.m-online.net [212.18.0.9]) by ozlabs.org (Postfix) with ESMTP id 53335100804 for ; Tue, 22 Mar 2011 19:36:41 +1100 (EST) Received: from frontend1.mail.m-online.net (unknown [192.168.8.180]) by mail-out.m-online.net (Postfix) with ESMTP id 505611C01D8F; Tue, 22 Mar 2011 09:27:35 +0100 (CET) X-Auth-Info: tYa63Ui8hUkKhj3DzebrSF+WdrmqYeRkAwwB06olvbA= Received: from mail.denx.de (host-82-135-33-74.customer.m-online.net [82.135.33.74]) by smtp-auth.mnet-online.de (Postfix) with ESMTPA id 534F81C00165; Tue, 22 Mar 2011 09:27:35 +0100 (CET) Received: from pollux.denx.de (pollux [192.168.1.1]) by mail.denx.de (Postfix) with ESMTP id 27D0E487F83F; Tue, 22 Mar 2011 09:27:35 +0100 (CET) Received: by pollux.denx.de (Postfix, from userid 515) id 7004818563709; Tue, 22 Mar 2011 09:27:34 +0100 (CET) From: Heiko Schocher To: linuxppc-dev@lists.ozlabs.org Subject: [PATCH v1 1/6] powerpc, 5200: add support for charon board Date: Tue, 22 Mar 2011 09:27:27 +0100 Message-Id: <1300782452-528-2-git-send-email-hs@denx.de> X-Mailer: git-send-email 1.7.4 In-Reply-To: <1300782452-528-1-git-send-email-hs@denx.de> References: <1291451028-22532-1-git-send-email-hs@denx.de> <1300782452-528-1-git-send-email-hs@denx.de> Cc: Ben Dooks , linux-fbdev@vger.kernel.org, devicetree-discuss@ozlabs.org, Samuel Ortiz , Vincent Sanders , linux-kernel@vger.kernel.org, Randy Dunlap , Paul Mundt , Heiko Schocher , Wolfgang Denk X-BeenThere: linuxppc-dev@lists.ozlabs.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org Sender: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org Signed-off-by: Heiko Schocher Acked-by: Benjamin Herrenschmidt cc: Wolfram Sang cc: Grant Likely cc: Benjamin Herrenschmidt cc: linux-fbdev@vger.kernel.org cc: devicetree-discuss@ozlabs.org cc: Ben Dooks cc: Vincent Sanders cc: Samuel Ortiz cc: linux-kernel@vger.kernel.org cc: Randy Dunlap cc: Wolfgang Denk cc: Paul Mundt Acked-by: Wolfram Sang --- - changes since v1: add comments from Wolfram Sang - no defconfig file - comment corrected in DTS - boardlist sorted alphabetically - commit log without boardinfo - changes for v6: - rebased against current head - repost complete patchserie - added Acked-by from Benjamin Herrenschmidt arch/powerpc/boot/dts/charon.dts | 226 ++++++++++++++++++++++++++ arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 + 2 files changed, 227 insertions(+), 0 deletions(-) create mode 100644 arch/powerpc/boot/dts/charon.dts diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts new file mode 100644 index 0000000..9776889 --- /dev/null +++ b/arch/powerpc/boot/dts/charon.dts @@ -0,0 +1,226 @@ +/* + * charon board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + * + * Copyright (C) 2010 DENX Software Engineering GmbH + * Heiko Schocher + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "anon,charon"; + compatible = "anon,charon"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + device_type = "dma-controller"; + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + fixed-link = <1 1 100 0 0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + dtt@28 { + compatible = "national,lm80"; + reg = <0x28>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = < 0 0 0xfc000000 0x02000000 + 3 0 0xe8000000 0x00080000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + + mram0@3,0 { + compatible = "mtd-ram"; + reg = <3 0x00000 0x80000>; + bank-width = <1>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index e36d6e2..846b789 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static const char *board[] __initdata = { + "anon,charon", "intercontrol,digsy-mtc", "manroland,mucmc52", "manroland,uc101",