mbox series

[0/4] nvmem: nintendo-otp: Add new driver for the Wii and Wii��U OTP

Message ID 20210519090525.1788-1-linkmauve@linkmauve.fr (mailing list archive)
Headers show
Series nvmem: nintendo-otp: Add new driver for the Wii and Wii��U OTP | expand

Message

Emmanuel Gil Peyrot May 19, 2021, 9:05 a.m. UTC 
The OTP is a read-only memory area which contains various keys and
signatures used to decrypt, encrypt or verify various pieces of storage.

Its size depends on the console, it is 128 bytes on the Wii and
1024 bytes on the Wii U (split into eight 128 bytes banks).

It can be used directly by writing into one register and reading from
the other one, without any additional synchronisation.

This series has only been tested on the Wii U so far, using the
downstream 4.19 branch from linux-wiiu[1], but it should also work on
the Wii on mainline.

[1] https://gitlab.com/linux-wiiu/linux-wiiu

Emmanuel Gil Peyrot (4):
  nvmem: nintendo-otp: Add new driver for the Wii and Wii U OTP
  dt-bindings: nintendo-otp: Document the Wii and Wii U OTP support
  powerpc: wii.dts: Expose the OTP on this platform
  powerpc: wii_defconfig: Enable OTP by default

 .../bindings/nvmem/nintendo-otp.txt           |  14 +++
 arch/powerpc/boot/dts/wii.dts                 |   5 +
 arch/powerpc/configs/wii_defconfig            |   1 +
 drivers/nvmem/Kconfig                         |  11 ++
 drivers/nvmem/Makefile                        |   2 +
 drivers/nvmem/nintendo-otp.c                  | 115 ++++++++++++++++++
 6 files changed, 148 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/nintendo-otp.txt
 create mode 100644 drivers/nvmem/nintendo-otp.c