diff mbox series

[1/1] dt-bindings: pci: armada: add system controller and MAC reset bit

Message ID 20241112065229.753466-1-jpatel2@marvell.com
State New
Headers show
Series [1/1] dt-bindings: pci: armada: add system controller and MAC reset bit | expand

Commit Message

Jenishkumar Maheshbhai Patel Nov. 12, 2024, 6:52 a.m. UTC
Adding Armada 7K/8K controller bindings optional system-controller
and mac-reset-bit-mask needed for linkdown procedure.

Signed-off-by: Jenishkumar Maheshbhai Patel <jpatel2@marvell.com>
---
 Documentation/devicetree/bindings/pci/pci-armada8k.txt | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Manivannan Sadhasivam Nov. 12, 2024, 7:59 a.m. UTC | #1
On Mon, Nov 11, 2024 at 10:52:29PM -0800, Jenishkumar Maheshbhai Patel wrote:
> Adding Armada 7K/8K controller bindings optional system-controller
> and mac-reset-bit-mask needed for linkdown procedure.
> 
> Signed-off-by: Jenishkumar Maheshbhai Patel <jpatel2@marvell.com>

Please send the patches as a series if they are all related.

- Mani

> ---
>  Documentation/devicetree/bindings/pci/pci-armada8k.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
> index ff25a134befa..a177b971a9a0 100644
> --- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt
> +++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
> @@ -24,6 +24,10 @@ Optional properties:
>  - phy-names: names of the PHYs corresponding to the number of lanes.
>  	Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
>  	2 PHYs.
> +- marvell,system-controller: address of system controller needed
> +	in order to reset MAC used by link-down handle
> +- marvell,mac-reset-bit-mask: MAC reset bit of system controller
> +	needed in order to reset MAC used by link-down handle
>  
>  Example:
>  
> @@ -45,4 +49,6 @@ Example:
>  		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>  		num-lanes = <1>;
>  		clocks = <&cpm_syscon0 1 13>;
> +		marvell,system-controller = <&CP11X_LABEL(syscon0)>;
> +		marvell,mac-reset-bit-mask = <CP11X_PCIEx_MAC_RESET_BIT_MASK(1)>;
>  	};
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
index ff25a134befa..a177b971a9a0 100644
--- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -24,6 +24,10 @@  Optional properties:
 - phy-names: names of the PHYs corresponding to the number of lanes.
 	Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
 	2 PHYs.
+- marvell,system-controller: address of system controller needed
+	in order to reset MAC used by link-down handle
+- marvell,mac-reset-bit-mask: MAC reset bit of system controller
+	needed in order to reset MAC used by link-down handle
 
 Example:
 
@@ -45,4 +49,6 @@  Example:
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		num-lanes = <1>;
 		clocks = <&cpm_syscon0 1 13>;
+		marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+		marvell,mac-reset-bit-mask = <CP11X_PCIEx_MAC_RESET_BIT_MASK(1)>;
 	};