@@ -114,6 +114,7 @@ tests/fs-tests/stress/fs_stress01.sh
tests/ubi-tests/runubitests.sh
tests/ubi-tests/ubi-stress-test.sh
tests/ubifs_tools-tests/lib/common.sh
+tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh
#
# Files generated by autotools
@@ -293,7 +293,8 @@ AC_CONFIG_FILES([tests/fs-tests/fs_help_all.sh
tests/fs-tests/stress/fs_stress01.sh
tests/ubi-tests/runubitests.sh
tests/ubi-tests/ubi-stress-test.sh
- tests/ubifs_tools-tests/lib/common.sh])
+ tests/ubifs_tools-tests/lib/common.sh
+ tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh])
AC_OUTPUT([Makefile])
@@ -1,2 +1,3 @@
test_SCRIPTS += \
- tests/ubifs_tools-tests/lib/common.sh
+ tests/ubifs_tools-tests/lib/common.sh \
+ tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh
new file mode 100755
@@ -0,0 +1,66 @@
+#!/bin/sh
+# Copyright (c), 2024, Huawei Technologies Co, Ltd.
+# Author: Zhihao Cheng <chengzhihao1@huawei.com>
+#
+# Test Description:
+# Refuse checking authenticated UBIFS image
+# Running time: 10s
+
+TESTBINDIR=@TESTBINDIR@
+source $TESTBINDIR/common.sh
+
+ID="0xec,0xa1,0x00,0x15" # 128M 128KB 2KB 512-sub-page
+
+function run_test()
+{
+ echo "Do authentication_refused test"
+
+ modprobe nandsim id_bytes=$ID
+ mtdnum="$(find_mtd_device "$nandsim_patt")"
+ flash_eraseall /dev/mtd$mtdnum
+
+ modprobe ubi mtd="$mtdnum,2048" || fatal "modprobe ubi fail"
+ ubimkvol -N vol_test -m -n 0 /dev/ubi$UBI_NUM || fatal "mkvol fail"
+ modprobe ubifs || fatal "modprobe ubifs fail"
+
+ mount_ubifs $DEV $MNT "authentication" || fatal "mount ubifs failed"
+ fsstress -d $MNT/fsstress -l0 -p4 -n10000 &
+ sleep $((RANDOM % 5))
+
+ ps -e | grep -w fsstress > /dev/null 2>&1
+ while [ $? -eq 0 ]
+ do
+ killall -9 fsstress > /dev/null 2>&1
+ sleep 1
+ ps -e | grep -w fsstress > /dev/null 2>&1
+ done
+
+ while true
+ do
+ res=`mount | grep "$MNT"`
+ if [[ "$res" == "" ]]
+ then
+ break;
+ fi
+ umount $MNT
+ sleep 0.1
+ done
+
+ fsck.ubifs -a $DEV # 'fsck.ubifs $DEV' is fine too.
+ res=$?
+ if [[ $res == $FSCK_OK ]]
+ then
+ fatal "fsck should not be success!"
+ fi
+
+ modprobe -r ubifs
+ modprobe -r ubi
+ modprobe -r nandsim
+}
+
+start_t=$(date +%s)
+run_test
+end_t=$(date +%s)
+time_cost=$(( end_t - start_t ))
+echo "Success, cost $time_cost seconds"
+exit 0
Authenticated UBIFS image is not supported in fsck, add testcase to check that. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> --- .gitignore | 1 + configure.ac | 3 +- tests/ubifs_tools-tests/Makemodule.am | 3 +- .../fsck_tests/authentication_refuse.sh.in | 66 ++++++++++++++++++++++ 4 files changed, 71 insertions(+), 2 deletions(-) create mode 100755 tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh.in