diff mbox series

[v1] ata: Fix typo in the comment

Message ID 20240926093755.3983833-1-yanzhen@vivo.com
State New
Headers show
Series [v1] ata: Fix typo in the comment | expand

Commit Message

Yan Zhen Sept. 26, 2024, 9:37 a.m. UTC
Correctly spelled comments make it easier for the reader to understand
the code.

Fix typos:
'multipe' ==> 'multiple',
'Paremeters' ==> 'Parameters',
'recieved' ==> 'received',
'realted' ==> 'related',
'evaulated' ==> 'evaluated',
'programing' ==> 'programming',
'coninue' ==> 'continue',
'Decriptor' ==> 'Descriptor',
'Lable' ==> 'Label',
'transmiting' ==> 'transmitting',
'correspondance' ==> 'correspondence',
'claculation' ==> 'calculation',
'everone' ==> 'everyone',
'contruct' ==> 'construct'.

Signed-off-by: Yan Zhen <yanzhen@vivo.com>
---
 drivers/ata/ahci.c           | 2 +-
 drivers/ata/ahci_imx.c       | 2 +-
 drivers/ata/ahci_xgene.c     | 2 +-
 drivers/ata/libata-acpi.c    | 4 ++--
 drivers/ata/pata_it8213.c    | 2 +-
 drivers/ata/pata_octeon_cf.c | 2 +-
 drivers/ata/pata_oldpiix.c   | 2 +-
 drivers/ata/pata_radisys.c   | 2 +-
 8 files changed, 9 insertions(+), 9 deletions(-)

Comments

Sergey Shtylyov Sept. 26, 2024, 5:01 p.m. UTC | #1
Hello!

   Should be s/typo/typos/ in the subject...

On 9/26/24 12:37, Yan Zhen wrote:

> Correctly spelled comments make it easier for the reader to understand

   Makes. :-)

> the code.
> 
> Fix typos:
> 'multipe' ==> 'multiple',
> 'Paremeters' ==> 'Parameters',
> 'recieved' ==> 'received',
> 'realted' ==> 'related',
> 'evaulated' ==> 'evaluated',
> 'programing' ==> 'programming',
> 'coninue' ==> 'continue',
> 'Decriptor' ==> 'Descriptor',
> 'Lable' ==> 'Label',
> 'transmiting' ==> 'transmitting',
> 'correspondance' ==> 'correspondence',
> 'claculation' ==> 'calculation',
> 'everone' ==> 'everyone',
> 'contruct' ==> 'construct'.
> 
> Signed-off-by: Yan Zhen <yanzhen@vivo.com>

Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>

[...]

MBR, Sergey
Sergey Shtylyov Sept. 26, 2024, 5:04 p.m. UTC | #2
On 9/26/24 20:01, Sergey Shtylyov wrote:

[...]

>> Correctly spelled comments make it easier for the reader to understand
> 
>    Makes. :-)

   Oops! Ignore me here. :-)

[...]

MBR, Sergey
diff mbox series

Patch

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 45f63b09828a..2d3d3d67b4d9 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1676,7 +1676,7 @@  static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
 	/*
 	 * If number of MSIs is less than number of ports then Sharing Last
 	 * Message mode could be enforced. In this case assume that advantage
-	 * of multipe MSIs is negated and use single MSI mode instead.
+	 * of multiple MSIs is negated and use single MSI mode instead.
 	 */
 	if (n_ports > 1) {
 		nvec = pci_alloc_irq_vectors(pdev, n_ports, INT_MAX,
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 6f955e9105e8..357aba1d5929 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -511,7 +511,7 @@  static int imx_sata_enable(struct ahci_host_priv *hpriv)
 
 	if (imxpriv->type == AHCI_IMX6Q || imxpriv->type == AHCI_IMX6QP) {
 		/*
-		 * set PHY Paremeters, two steps to configure the GPR13,
+		 * set PHY Parameters, two steps to configure the GPR13,
 		 * one write for rest of parameters, mask of first write
 		 * is 0x07ffffff, and the other one write for setting
 		 * the mpll_clk_en.
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 81a1d838c0fc..7e6b4db8a1c2 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -534,7 +534,7 @@  static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class,
 
 /**
  * xgene_ahci_handle_broken_edge_irq - Handle the broken irq.
- * @host: Host that recieved the irq
+ * @host: Host that received the irq
  * @irq_masked: HOST_IRQ_STAT value
  *
  * For hardware with broken edge trigger latch
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index d36e71f475ab..b7f0bf795521 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -86,7 +86,7 @@  static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
  * @dev: ATA device ACPI event occurred (can be NULL)
  * @event: ACPI event which occurred
  *
- * All ACPI bay / device realted events end up in this function.  If
+ * All ACPI bay / device related events end up in this function.  If
  * the event is port-wide @dev is NULL.  If the event is specific to a
  * device, @dev points to it.
  *
@@ -832,7 +832,7 @@  void ata_acpi_on_resume(struct ata_port *ap)
 				dev->flags |= ATA_DFLAG_ACPI_PENDING;
 		}
 	} else {
-		/* SATA _GTF needs to be evaulated after _SDD and
+		/* SATA _GTF needs to be evaluated after _SDD and
 		 * there's no reason to evaluate IDE _GTF early
 		 * without _STM.  Clear cache and schedule _GTF.
 		 */
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index b7ac56103c8a..9cbe2132ce59 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -81,7 +81,7 @@  static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
 	int control = 0;
 
 	/*
-	 *	See Intel Document 298600-004 for the timing programing rules
+	 *	See Intel Document 298600-004 for the timing programming rules
 	 *	for PIIX/ICH. The 8213 is a clone so very similar
 	 */
 
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 0bb9607e7348..dce24806a052 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -183,7 +183,7 @@  static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev)
 	reg_tim.s.ale = 0;
 	/* Not used */
 	reg_tim.s.page = 0;
-	/* Time after IORDY to coninue to assert the data */
+	/* Time after IORDY to continue to assert the data */
 	reg_tim.s.wait = 0;
 	/* Time to wait to complete the cycle. */
 	reg_tim.s.pause = pause;
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index dca82d92b004..3d01b7000e41 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -70,7 +70,7 @@  static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev)
 	int control = 0;
 
 	/*
-	 *	See Intel Document 298600-004 for the timing programing rules
+	 *	See Intel Document 298600-004 for the timing programming rules
 	 *	for PIIX/ICH. Note that the early PIIX does not have the slave
 	 *	timing port at 0x44.
 	 */
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 84b001097093..40ef8072c159 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -45,7 +45,7 @@  static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev)
 	int control = 0;
 
 	/*
-	 *	See Intel Document 298600-004 for the timing programing rules
+	 *	See Intel Document 298600-004 for the timing programming rules
 	 *	for PIIX/ICH. Note that the early PIIX does not have the slave
 	 *	timing port at 0x44. The Radisys is a relative of the PIIX
 	 *	but not the same so be careful.