diff mbox series

[v3,1/2] dt-bindings: i2c: spacemit: add support for K1 SoC

Message ID 20241112-k1-i2c-master-v3-1-5005b70dc208@gmail.com
State Changes Requested
Delegated to: Andi Shyti
Headers show
Series riscv: spacemit: add i2c support to K1 SoC | expand

Commit Message

Troy Mitchell Nov. 12, 2024, 3:07 a.m. UTC
From: Troy Mitchell <troymitchell988@gmail.com>

The I2C of K1 supports fast-speed-mode and high-speed-mode,
and supports FIFO transmission.

Signed-off-by: Troy Mitchell <TroyMitchell988@gmail.com>
---
 .../devicetree/bindings/i2c/spacemit,k1-i2c.yaml   | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)

Comments

Conor Dooley Nov. 12, 2024, 6:03 p.m. UTC | #1
On Tue, Nov 12, 2024 at 11:07:39AM +0800, Troy Mitchell wrote:
> From: Troy Mitchell <troymitchell988@gmail.com>
> 
> The I2C of K1 supports fast-speed-mode and high-speed-mode,
> and supports FIFO transmission.
> 
> Signed-off-by: Troy Mitchell <TroyMitchell988@gmail.com>
> ---
>  .../devicetree/bindings/i2c/spacemit,k1-i2c.yaml   | 52 ++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
> new file mode 100644
> index 000000000000..e8cce360bf03
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/spacemit,k1-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: I2C controller embedded in SpacemiT's K1 SoC
> +
> +maintainers:
> +  - Troy Mitchell <troymitchell988@gmail.com>
> +
> +properties:
> +  compatible:
> +    const: spacemit,k1-i2c
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-frequency:
> +    description:
> +      Desired I2C bus clock frequency in Hz.
> +      K1 supports standard, fast, high-speed modes, from 1 to 3300000.
> +    default: 100000
> +    minimum: 1
> +    maximum: 3300000

It's sufficient to define just default and max btw, the min is set in
i2c-controller.yaml (in dt-schema itself). Don't respin for that alone.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    i2c@d4010800 {
> +        compatible = "spacemit,k1-i2c";
> +        reg = <0xd4010800 0x38>;
> +        interrupt-parent = <&plic>;
> +        interrupts = <36>;
> +        clocks = <&ccu 90>;
> +        clock-frequency = <100000>;
> +    };
> +
> +...
> 
> -- 
> 2.34.1
>
Yixun Lan Nov. 14, 2024, 7:06 a.m. UTC | #2
On 18:03 Tue 12 Nov     , Conor Dooley wrote:
> On Tue, Nov 12, 2024 at 11:07:39AM +0800, Troy Mitchell wrote:
> > From: Troy Mitchell <troymitchell988@gmail.com>
> > 
> > The I2C of K1 supports fast-speed-mode and high-speed-mode,
> > and supports FIFO transmission.
> > 
> > Signed-off-by: Troy Mitchell <TroyMitchell988@gmail.com>
> > ---
> >  .../devicetree/bindings/i2c/spacemit,k1-i2c.yaml   | 52 ++++++++++++++++++++++
> >  1 file changed, 52 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
> > new file mode 100644
> > index 000000000000..e8cce360bf03
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
> > @@ -0,0 +1,52 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i2c/spacemit,k1-i2c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: I2C controller embedded in SpacemiT's K1 SoC
> > +
> > +maintainers:
> > +  - Troy Mitchell <troymitchell988@gmail.com>
> > +
> > +properties:
> > +  compatible:
> > +    const: spacemit,k1-i2c
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-frequency:
> > +    description:
> > +      Desired I2C bus clock frequency in Hz.
> > +      K1 supports standard, fast, high-speed modes, from 1 to 3300000.
while we are here, I'd suggest rephrase the sentence above to align it better with the doc

K1 support three different modes which running different frequencies
standard speed mode: up to 100000 (100Hz)
fast speed mode    : up to 400000 (400Hz)
high speed mode    : up to 3300000 (3.3Mhz)

> > +    default: 100000
> > +    minimum: 1
> > +    maximum: 3300000
> 
> It's sufficient to define just default and max btw, the min is set in
> i2c-controller.yaml (in dt-schema itself). Don't respin for that alone.
+1, the minimum settings isn't really useful, clearly not apply in the practical case

> 
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    i2c@d4010800 {
> > +        compatible = "spacemit,k1-i2c";
> > +        reg = <0xd4010800 0x38>;
> > +        interrupt-parent = <&plic>;
> > +        interrupts = <36>;
> > +        clocks = <&ccu 90>;
> > +        clock-frequency = <100000>;
> > +    };
> > +
> > +...
> > 
> > -- 
> > 2.34.1
> >
Troy Mitchell Nov. 21, 2024, 4:12 a.m. UTC | #3
Hi, Yixun. Thanks for ur review.

On 2024/11/14 15:06, Yixun Lan wrote:
> On 18:03 Tue 12 Nov     , Conor Dooley wrote:
>> On Tue, Nov 12, 2024 at 11:07:39AM +0800, Troy Mitchell wrote:
>>> From: Troy Mitchell <troymitchell988@gmail.com>
>>>
>>> The I2C of K1 supports fast-speed-mode and high-speed-mode,
>>> and supports FIFO transmission.
>>>
>>> Signed-off-by: Troy Mitchell <TroyMitchell988@gmail.com>
>>> ---
>>>  .../devicetree/bindings/i2c/spacemit,k1-i2c.yaml   | 52 ++++++++++++++++++++++
>>>  1 file changed, 52 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
>>> new file mode 100644
>>> index 000000000000..e8cce360bf03
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
>>> @@ -0,0 +1,52 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/i2c/spacemit,k1-i2c.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: I2C controller embedded in SpacemiT's K1 SoC
>>> +
>>> +maintainers:
>>> +  - Troy Mitchell <troymitchell988@gmail.com>
>>> +
>>> +properties:
>>> +  compatible:
>>> +    const: spacemit,k1-i2c
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  interrupts:
>>> +    maxItems: 1
>>> +
>>> +  clocks:
>>> +    maxItems: 1
>>> +
>>> +  clock-frequency:
>>> +    description:
>>> +      Desired I2C bus clock frequency in Hz.
>>> +      K1 supports standard, fast, high-speed modes, from 1 to 3300000.
> while we are here, I'd suggest rephrase the sentence above to align it better with the doc
> 
> K1 support three different modes which running different frequencies
> standard speed mode: up to 100000 (100Hz)
> fast speed mode    : up to 400000 (400Hz)
> high speed mode    : up to 3300000 (3.3Mhz)>
>>> +    default: 100000
>>> +    minimum: 1
I will modify `description` and drop `minimum` in next version
>>> +    maximum: 3300000
>>
>> It's sufficient to define just default and max btw, the min is set in
>> i2c-controller.yaml (in dt-schema itself). Don't respin for that alone.
> +1, the minimum settings isn't really useful, clearly not apply in the practical case
> 
>>
>> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>>> +
>>> +required:
>>> +  - compatible
>>> +  - reg
>>> +  - interrupts
>>> +  - clocks
>>> +
>>> +unevaluatedProperties: false
>>> +
>>> +examples:
>>> +  - |
>>> +    i2c@d4010800 {
>>> +        compatible = "spacemit,k1-i2c";
>>> +        reg = <0xd4010800 0x38>;
>>> +        interrupt-parent = <&plic>;
>>> +        interrupts = <36>;
>>> +        clocks = <&ccu 90>;
>>> +        clock-frequency = <100000>;
>>> +    };
>>> +
>>> +...
>>>
>>> -- 
>>> 2.34.1
>>>
> 
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
new file mode 100644
index 000000000000..e8cce360bf03
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
@@ -0,0 +1,52 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/spacemit,k1-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in SpacemiT's K1 SoC
+
+maintainers:
+  - Troy Mitchell <troymitchell988@gmail.com>
+
+properties:
+  compatible:
+    const: spacemit,k1-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz.
+      K1 supports standard, fast, high-speed modes, from 1 to 3300000.
+    default: 100000
+    minimum: 1
+    maximum: 3300000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@d4010800 {
+        compatible = "spacemit,k1-i2c";
+        reg = <0xd4010800 0x38>;
+        interrupt-parent = <&plic>;
+        interrupts = <36>;
+        clocks = <&ccu 90>;
+        clock-frequency = <100000>;
+    };
+
+...