@@ -412,16 +412,14 @@ static int i801_check_post(struct i801_priv *priv, int status)
/* Check if it worked */
status = inb_p(SMBHSTSTS(priv));
- if ((status & SMBHSTSTS_HOST_BUSY) ||
- !(status & SMBHSTSTS_FAILED))
- dev_dbg(&priv->pci_dev->dev,
- "Failed terminating the transaction\n");
+ if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED))
+ pci_dbg(priv->pci_dev, "Failed terminating the transaction\n");
return -ETIMEDOUT;
}
if (status & SMBHSTSTS_FAILED) {
result = -EIO;
- dev_err(&priv->pci_dev->dev, "Transaction failed\n");
+ pci_err(priv->pci_dev, "Transaction failed\n");
}
if (status & SMBHSTSTS_DEV_ERR) {
/*
@@ -449,7 +447,7 @@ static int i801_check_post(struct i801_priv *priv, int status)
}
if (status & SMBHSTSTS_BUS_ERR) {
result = -EAGAIN;
- dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
+ pci_dbg(priv->pci_dev, "Lost arbitration\n");
}
return result;
@@ -578,8 +576,7 @@ static void i801_isr_byte_done(struct i801_priv *priv)
if (priv->count < priv->len)
priv->data[priv->count++] = inb(SMBBLKDAT(priv));
else
- dev_dbg(&priv->pci_dev->dev,
- "Discarding extra byte on block read\n");
+ pci_dbg(priv->pci_dev, "Discarding extra byte on block read\n");
/* Set LAST_BYTE for last byte of read transaction */
if (priv->count == priv->len - 1)
@@ -1271,7 +1268,7 @@ static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv)
}
if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) {
- dev_warn(&priv->pci_dev->dev,
+ pci_warn(priv->pci_dev,
"Accelerometer lis3lv02d is present on SMBus but its"
" address is unknown, skipping registration\n");
return;
@@ -1562,7 +1559,7 @@ static void i801_add_tco(struct i801_priv *priv)
priv->tco_pdev = i801_add_tco_spt(pci_dev, tco_res);
if (IS_ERR(priv->tco_pdev))
- dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
+ pci_warn(pci_dev, "failed to create iTCO device\n");
}
#ifdef CONFIG_ACPI
@@ -1591,8 +1588,8 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
priv->acpi_reserved = true;
- dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n");
- dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n");
+ pci_warn(pdev, "BIOS is accessing SMBus registers\n");
+ pci_warn(pdev, "Driver SMBus register access inhibited\n");
/*
* BIOS is accessing the host controller so prevent it from
@@ -1673,8 +1670,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Disable features on user request */
for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
if (priv->features & disable_features & (1 << i))
- dev_notice(&dev->dev, "%s disabled by user\n",
- i801_feature_names[i]);
+ pci_notice(dev, "%s disabled by user\n", i801_feature_names[i]);
}
priv->features &= ~disable_features;
@@ -1684,8 +1680,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
err = pcim_enable_device(dev);
if (err) {
- dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
- err);
+ pci_err(dev, "Failed to enable SMBus PCI device (%d)\n", err);
return err;
}
pcim_pin_device(dev);
@@ -1693,8 +1688,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Determine the address of the SMBus area */
priv->smba = pci_resource_start(dev, SMBBAR);
if (!priv->smba) {
- dev_err(&dev->dev,
- "SMBus base address uninitialized, upgrade BIOS\n");
+ pci_err(dev, "SMBus base address uninitialized, upgrade BIOS\n");
return -ENODEV;
}
@@ -1703,26 +1697,24 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
err = pcim_iomap_regions(dev, 1 << SMBBAR, DRV_NAME);
if (err) {
- dev_err(&dev->dev,
- "Failed to request SMBus region 0x%lx-0x%Lx\n",
- priv->smba,
- (unsigned long long)pci_resource_end(dev, SMBBAR));
+ pci_err(dev, "Failed to request SMBus region %pr\n",
+ pci_resource_n(dev, SMBBAR));
i801_acpi_remove(priv);
return err;
}
- pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
+ pci_read_config_byte(dev, SMBHSTCFG, &priv->original_hstcfg);
i801_setup_hstcfg(priv);
if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
- dev_info(&dev->dev, "Enabling SMBus device\n");
+ pci_info(dev, "Enabling SMBus device\n");
if (priv->original_hstcfg & SMBHSTCFG_SMB_SMI_EN) {
- dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
+ pci_dbg(dev, "SMBus using interrupt SMI#\n");
/* Disable SMBus interrupt feature if SMBus using SMI# */
priv->features &= ~FEATURE_IRQ;
}
if (priv->original_hstcfg & SMBHSTCFG_SPD_WD)
- dev_info(&dev->dev, "SPD Write Disable is set\n");
+ pci_info(dev, "SPD Write Disable is set\n");
/* Clear special mode bits */
if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
@@ -1741,7 +1733,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Complain if an interrupt is already pending */
pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
if (pcists & PCI_STATUS_INTERRUPT)
- dev_warn(&dev->dev, "An interrupt is pending!\n");
+ pci_warn(dev, "An interrupt is pending!\n");
}
if (priv->features & FEATURE_IRQ) {
@@ -1750,12 +1742,11 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
err = devm_request_irq(&dev->dev, dev->irq, i801_isr,
IRQF_SHARED, DRV_NAME, priv);
if (err) {
- dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
- dev->irq, err);
+ pci_err(dev, "Failed to allocate irq %d: %d\n", dev->irq, err);
priv->features &= ~FEATURE_IRQ;
}
}
- dev_info(&dev->dev, "SMBus using %s\n",
+ pci_info(dev, "SMBus using %s\n",
priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling");
/* Host notification uses an interrupt */
- Use pci_err et al instead of dev_err to simplify the code - use format %pr to print resource Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/i2c/busses/i2c-i801.c | 51 +++++++++++++++-------------------- 1 file changed, 21 insertions(+), 30 deletions(-)