diff mbox series

[v3,3/8] riscv: dts: thead: Add TH1520 pin control nodes

Message ID 20240930-th1520-pinctrl-v3-3-32cea2bdbecb@tenstorrent.com
State New
Headers show
Series pinctrl: Add T-Head TH1520 SoC pin controllers | expand

Commit Message

Drew Fustini Sept. 30, 2024, 7:50 p.m. UTC 
From: Emil Renner Berthing <emil.renner.berthing@canonical.com>

Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC.

Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
---
 arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts |  4 ++++
 .../boot/dts/thead/th1520-lichee-module-4a.dtsi    |  4 ++++
 arch/riscv/boot/dts/thead/th1520.dtsi              | 27 ++++++++++++++++++++++
 3 files changed, 35 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index 497d961456f3..e88b4fce755e 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -45,6 +45,10 @@  &osc_32k {
 	clock-frequency = <32768>;
 };
 
+&aonsys_clk {
+	clock-frequency = <73728000>;
+};
+
 &dmac0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index 78977bdbbe3d..bf1c639072b8 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -25,6 +25,10 @@  &osc_32k {
 	clock-frequency = <32768>;
 };
 
+&aonsys_clk {
+	clock-frequency = <73728000>;
+};
+
 &dmac0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index 6992060e6a54..e4eda2a76595 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -216,6 +216,12 @@  osc_32k: 32k-oscillator {
 		#clock-cells = <0>;
 	};
 
+	aonsys_clk: aonsys-clk {
+		compatible = "fixed-clock";
+		clock-output-names = "aonsys_clk";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -354,6 +360,13 @@  portd: gpio-controller@0 {
 			};
 		};
 
+		padctrl1_apsys: pinctrl@ffe7f3c000 {
+			compatible = "thead,th1520-pinctrl";
+			reg = <0xff 0xe7f3c000 0x0 0x1000>;
+			clocks = <&clk CLK_PADCTRL1>;
+			thead,pad-group = <2>;
+		};
+
 		gpio0: gpio@ffec005000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xec005000 0x0 0x1000>;
@@ -392,6 +405,13 @@  portb: gpio-controller@0 {
 			};
 		};
 
+		padctrl0_apsys: pinctrl@ffec007000 {
+			compatible = "thead,th1520-pinctrl";
+			reg = <0xff 0xec007000 0x0 0x1000>;
+			clocks = <&clk CLK_PADCTRL0>;
+			thead,pad-group = <3>;
+		};
+
 		uart2: serial@ffec010000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xec010000 0x0 0x4000>;
@@ -538,6 +558,13 @@  porte: gpio-controller@0 {
 			};
 		};
 
+		padctrl_aosys: pinctrl@fffff4a000 {
+			compatible = "thead,th1520-pinctrl";
+			reg = <0xff 0xfff4a000 0x0 0x2000>;
+			thead,pad-group = <1>;
+			clocks = <&aonsys_clk>;
+		};
+
 		ao_gpio1: gpio@fffff52000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xfff52000 0x0 0x1000>;