@@ -67,24 +67,6 @@ config PINCTRL_AT91
help
Say Y here to enable the at91 pinctrl driver
-config PINCTRL_BCM2835
- bool
- select PINMUX
- select PINCONF
-
-config PINCTRL_BCM281XX
- bool "Broadcom BCM281xx pinctrl driver"
- depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
- select PINMUX
- select PINCONF
- select GENERIC_PINCONF
- select REGMAP_MMIO
- help
- Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
- for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
- BCM28145, and BCM28155 SoCs. This driver requires the pinctrl
- framework. GPIO is provided by a separate GPIO driver.
-
config PINCTRL_LANTIQ
bool
depends on LANTIQ
@@ -191,6 +173,7 @@ config PINCTRL_PALMAS
open drain configuration for the Palmas series devices like
TPS65913, TPS80036 etc.
+source "drivers/pinctrl/bcm/Kconfig"
source "drivers/pinctrl/berlin/Kconfig"
source "drivers/pinctrl/freescale/Kconfig"
source "drivers/pinctrl/intel/Kconfig"
@@ -14,8 +14,6 @@ obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o
obj-$(CONFIG_PINCTRL_BF54x) += pinctrl-adi2-bf54x.o
obj-$(CONFIG_PINCTRL_BF60x) += pinctrl-adi2-bf60x.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
-obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
-obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
@@ -36,6 +34,8 @@ obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o
obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o
+obj-$(CONFIG_ARCH_BCM) += bcm/
+obj-$(CONFIG_ARCH_BCM2835) += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-y += freescale/
obj-$(CONFIG_X86) += intel/
new file mode 100644
@@ -0,0 +1,21 @@
+#
+# Broadcom pinctrl drivers
+#
+
+config PINCTRL_BCM281XX
+ bool "Broadcom BCM281xx pinctrl driver"
+ depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select REGMAP_MMIO
+ help
+ Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
+ for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
+ BCM28145, and BCM28155 SoCs. This driver requires the pinctrl
+ framework. GPIO is provided by a separate GPIO driver.
+
+config PINCTRL_BCM2835
+ bool
+ select PINMUX
+ select PINCONF
new file mode 100644
@@ -0,0 +1,4 @@
+# Broadcom pinctrl support
+
+obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
+obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
new file mode 100644
@@ -0,0 +1,1455 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+/* BCM281XX Pin Control Registers Definitions */
+
+/* Function Select bits are the same for all pin control registers */
+#define BCM281XX_PIN_REG_F_SEL_MASK 0x0700
+#define BCM281XX_PIN_REG_F_SEL_SHIFT 8
+
+/* Standard pin register */
+#define BCM281XX_STD_PIN_REG_DRV_STR_MASK 0x0007
+#define BCM281XX_STD_PIN_REG_DRV_STR_SHIFT 0
+#define BCM281XX_STD_PIN_REG_INPUT_DIS_MASK 0x0008
+#define BCM281XX_STD_PIN_REG_INPUT_DIS_SHIFT 3
+#define BCM281XX_STD_PIN_REG_SLEW_MASK 0x0010
+#define BCM281XX_STD_PIN_REG_SLEW_SHIFT 4
+#define BCM281XX_STD_PIN_REG_PULL_UP_MASK 0x0020
+#define BCM281XX_STD_PIN_REG_PULL_UP_SHIFT 5
+#define BCM281XX_STD_PIN_REG_PULL_DN_MASK 0x0040
+#define BCM281XX_STD_PIN_REG_PULL_DN_SHIFT 6
+#define BCM281XX_STD_PIN_REG_HYST_MASK 0x0080
+#define BCM281XX_STD_PIN_REG_HYST_SHIFT 7
+
+/* I2C pin register */
+#define BCM281XX_I2C_PIN_REG_INPUT_DIS_MASK 0x0004
+#define BCM281XX_I2C_PIN_REG_INPUT_DIS_SHIFT 2
+#define BCM281XX_I2C_PIN_REG_SLEW_MASK 0x0008
+#define BCM281XX_I2C_PIN_REG_SLEW_SHIFT 3
+#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_MASK 0x0070
+#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_SHIFT 4
+
+/* HDMI pin register */
+#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_MASK 0x0008
+#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_SHIFT 3
+#define BCM281XX_HDMI_PIN_REG_MODE_MASK 0x0010
+#define BCM281XX_HDMI_PIN_REG_MODE_SHIFT 4
+
+/**
+ * bcm281xx_pin_type - types of pin register
+ */
+enum bcm281xx_pin_type {
+ BCM281XX_PIN_TYPE_UNKNOWN = 0,
+ BCM281XX_PIN_TYPE_STD,
+ BCM281XX_PIN_TYPE_I2C,
+ BCM281XX_PIN_TYPE_HDMI,
+};
+
+static enum bcm281xx_pin_type std_pin = BCM281XX_PIN_TYPE_STD;
+static enum bcm281xx_pin_type i2c_pin = BCM281XX_PIN_TYPE_I2C;
+static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI;
+
+/**
+ * bcm281xx_pin_function- define pin function
+ */
+struct bcm281xx_pin_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned ngroups;
+};
+
+/**
+ * bcm281xx_pinctrl_data - Broadcom-specific pinctrl data
+ * @reg_base - base of pinctrl registers
+ */
+struct bcm281xx_pinctrl_data {
+ void __iomem *reg_base;
+
+ /* List of all pins */
+ const struct pinctrl_pin_desc *pins;
+ const unsigned npins;
+
+ const struct bcm281xx_pin_function *functions;
+ const unsigned nfunctions;
+
+ struct regmap *regmap;
+};
+
+/*
+ * Pin number definition. The order here must be the same as defined in the
+ * PADCTRLREG block in the RDB.
+ */
+#define BCM281XX_PIN_ADCSYNC 0
+#define BCM281XX_PIN_BAT_RM 1
+#define BCM281XX_PIN_BSC1_SCL 2
+#define BCM281XX_PIN_BSC1_SDA 3
+#define BCM281XX_PIN_BSC2_SCL 4
+#define BCM281XX_PIN_BSC2_SDA 5
+#define BCM281XX_PIN_CLASSGPWR 6
+#define BCM281XX_PIN_CLK_CX8 7
+#define BCM281XX_PIN_CLKOUT_0 8
+#define BCM281XX_PIN_CLKOUT_1 9
+#define BCM281XX_PIN_CLKOUT_2 10
+#define BCM281XX_PIN_CLKOUT_3 11
+#define BCM281XX_PIN_CLKREQ_IN_0 12
+#define BCM281XX_PIN_CLKREQ_IN_1 13
+#define BCM281XX_PIN_CWS_SYS_REQ1 14
+#define BCM281XX_PIN_CWS_SYS_REQ2 15
+#define BCM281XX_PIN_CWS_SYS_REQ3 16
+#define BCM281XX_PIN_DIGMIC1_CLK 17
+#define BCM281XX_PIN_DIGMIC1_DQ 18
+#define BCM281XX_PIN_DIGMIC2_CLK 19
+#define BCM281XX_PIN_DIGMIC2_DQ 20
+#define BCM281XX_PIN_GPEN13 21
+#define BCM281XX_PIN_GPEN14 22
+#define BCM281XX_PIN_GPEN15 23
+#define BCM281XX_PIN_GPIO00 24
+#define BCM281XX_PIN_GPIO01 25
+#define BCM281XX_PIN_GPIO02 26
+#define BCM281XX_PIN_GPIO03 27
+#define BCM281XX_PIN_GPIO04 28
+#define BCM281XX_PIN_GPIO05 29
+#define BCM281XX_PIN_GPIO06 30
+#define BCM281XX_PIN_GPIO07 31
+#define BCM281XX_PIN_GPIO08 32
+#define BCM281XX_PIN_GPIO09 33
+#define BCM281XX_PIN_GPIO10 34
+#define BCM281XX_PIN_GPIO11 35
+#define BCM281XX_PIN_GPIO12 36
+#define BCM281XX_PIN_GPIO13 37
+#define BCM281XX_PIN_GPIO14 38
+#define BCM281XX_PIN_GPS_PABLANK 39
+#define BCM281XX_PIN_GPS_TMARK 40
+#define BCM281XX_PIN_HDMI_SCL 41
+#define BCM281XX_PIN_HDMI_SDA 42
+#define BCM281XX_PIN_IC_DM 43
+#define BCM281XX_PIN_IC_DP 44
+#define BCM281XX_PIN_KP_COL_IP_0 45
+#define BCM281XX_PIN_KP_COL_IP_1 46
+#define BCM281XX_PIN_KP_COL_IP_2 47
+#define BCM281XX_PIN_KP_COL_IP_3 48
+#define BCM281XX_PIN_KP_ROW_OP_0 49
+#define BCM281XX_PIN_KP_ROW_OP_1 50
+#define BCM281XX_PIN_KP_ROW_OP_2 51
+#define BCM281XX_PIN_KP_ROW_OP_3 52
+#define BCM281XX_PIN_LCD_B_0 53
+#define BCM281XX_PIN_LCD_B_1 54
+#define BCM281XX_PIN_LCD_B_2 55
+#define BCM281XX_PIN_LCD_B_3 56
+#define BCM281XX_PIN_LCD_B_4 57
+#define BCM281XX_PIN_LCD_B_5 58
+#define BCM281XX_PIN_LCD_B_6 59
+#define BCM281XX_PIN_LCD_B_7 60
+#define BCM281XX_PIN_LCD_G_0 61
+#define BCM281XX_PIN_LCD_G_1 62
+#define BCM281XX_PIN_LCD_G_2 63
+#define BCM281XX_PIN_LCD_G_3 64
+#define BCM281XX_PIN_LCD_G_4 65
+#define BCM281XX_PIN_LCD_G_5 66
+#define BCM281XX_PIN_LCD_G_6 67
+#define BCM281XX_PIN_LCD_G_7 68
+#define BCM281XX_PIN_LCD_HSYNC 69
+#define BCM281XX_PIN_LCD_OE 70
+#define BCM281XX_PIN_LCD_PCLK 71
+#define BCM281XX_PIN_LCD_R_0 72
+#define BCM281XX_PIN_LCD_R_1 73
+#define BCM281XX_PIN_LCD_R_2 74
+#define BCM281XX_PIN_LCD_R_3 75
+#define BCM281XX_PIN_LCD_R_4 76
+#define BCM281XX_PIN_LCD_R_5 77
+#define BCM281XX_PIN_LCD_R_6 78
+#define BCM281XX_PIN_LCD_R_7 79
+#define BCM281XX_PIN_LCD_VSYNC 80
+#define BCM281XX_PIN_MDMGPIO0 81
+#define BCM281XX_PIN_MDMGPIO1 82
+#define BCM281XX_PIN_MDMGPIO2 83
+#define BCM281XX_PIN_MDMGPIO3 84
+#define BCM281XX_PIN_MDMGPIO4 85
+#define BCM281XX_PIN_MDMGPIO5 86
+#define BCM281XX_PIN_MDMGPIO6 87
+#define BCM281XX_PIN_MDMGPIO7 88
+#define BCM281XX_PIN_MDMGPIO8 89
+#define BCM281XX_PIN_MPHI_DATA_0 90
+#define BCM281XX_PIN_MPHI_DATA_1 91
+#define BCM281XX_PIN_MPHI_DATA_2 92
+#define BCM281XX_PIN_MPHI_DATA_3 93
+#define BCM281XX_PIN_MPHI_DATA_4 94
+#define BCM281XX_PIN_MPHI_DATA_5 95
+#define BCM281XX_PIN_MPHI_DATA_6 96
+#define BCM281XX_PIN_MPHI_DATA_7 97
+#define BCM281XX_PIN_MPHI_DATA_8 98
+#define BCM281XX_PIN_MPHI_DATA_9 99
+#define BCM281XX_PIN_MPHI_DATA_10 100
+#define BCM281XX_PIN_MPHI_DATA_11 101
+#define BCM281XX_PIN_MPHI_DATA_12 102
+#define BCM281XX_PIN_MPHI_DATA_13 103
+#define BCM281XX_PIN_MPHI_DATA_14 104
+#define BCM281XX_PIN_MPHI_DATA_15 105
+#define BCM281XX_PIN_MPHI_HA0 106
+#define BCM281XX_PIN_MPHI_HAT0 107
+#define BCM281XX_PIN_MPHI_HAT1 108
+#define BCM281XX_PIN_MPHI_HCE0_N 109
+#define BCM281XX_PIN_MPHI_HCE1_N 110
+#define BCM281XX_PIN_MPHI_HRD_N 111
+#define BCM281XX_PIN_MPHI_HWR_N 112
+#define BCM281XX_PIN_MPHI_RUN0 113
+#define BCM281XX_PIN_MPHI_RUN1 114
+#define BCM281XX_PIN_MTX_SCAN_CLK 115
+#define BCM281XX_PIN_MTX_SCAN_DATA 116
+#define BCM281XX_PIN_NAND_AD_0 117
+#define BCM281XX_PIN_NAND_AD_1 118
+#define BCM281XX_PIN_NAND_AD_2 119
+#define BCM281XX_PIN_NAND_AD_3 120
+#define BCM281XX_PIN_NAND_AD_4 121
+#define BCM281XX_PIN_NAND_AD_5 122
+#define BCM281XX_PIN_NAND_AD_6 123
+#define BCM281XX_PIN_NAND_AD_7 124
+#define BCM281XX_PIN_NAND_ALE 125
+#define BCM281XX_PIN_NAND_CEN_0 126
+#define BCM281XX_PIN_NAND_CEN_1 127
+#define BCM281XX_PIN_NAND_CLE 128
+#define BCM281XX_PIN_NAND_OEN 129
+#define BCM281XX_PIN_NAND_RDY_0 130
+#define BCM281XX_PIN_NAND_RDY_1 131
+#define BCM281XX_PIN_NAND_WEN 132
+#define BCM281XX_PIN_NAND_WP 133
+#define BCM281XX_PIN_PC1 134
+#define BCM281XX_PIN_PC2 135
+#define BCM281XX_PIN_PMU_INT 136
+#define BCM281XX_PIN_PMU_SCL 137
+#define BCM281XX_PIN_PMU_SDA 138
+#define BCM281XX_PIN_RFST2G_MTSLOTEN3G 139
+#define BCM281XX_PIN_RGMII_0_RX_CTL 140
+#define BCM281XX_PIN_RGMII_0_RXC 141
+#define BCM281XX_PIN_RGMII_0_RXD_0 142
+#define BCM281XX_PIN_RGMII_0_RXD_1 143
+#define BCM281XX_PIN_RGMII_0_RXD_2 144
+#define BCM281XX_PIN_RGMII_0_RXD_3 145
+#define BCM281XX_PIN_RGMII_0_TX_CTL 146
+#define BCM281XX_PIN_RGMII_0_TXC 147
+#define BCM281XX_PIN_RGMII_0_TXD_0 148
+#define BCM281XX_PIN_RGMII_0_TXD_1 149
+#define BCM281XX_PIN_RGMII_0_TXD_2 150
+#define BCM281XX_PIN_RGMII_0_TXD_3 151
+#define BCM281XX_PIN_RGMII_1_RX_CTL 152
+#define BCM281XX_PIN_RGMII_1_RXC 153
+#define BCM281XX_PIN_RGMII_1_RXD_0 154
+#define BCM281XX_PIN_RGMII_1_RXD_1 155
+#define BCM281XX_PIN_RGMII_1_RXD_2 156
+#define BCM281XX_PIN_RGMII_1_RXD_3 157
+#define BCM281XX_PIN_RGMII_1_TX_CTL 158
+#define BCM281XX_PIN_RGMII_1_TXC 159
+#define BCM281XX_PIN_RGMII_1_TXD_0 160
+#define BCM281XX_PIN_RGMII_1_TXD_1 161
+#define BCM281XX_PIN_RGMII_1_TXD_2 162
+#define BCM281XX_PIN_RGMII_1_TXD_3 163
+#define BCM281XX_PIN_RGMII_GPIO_0 164
+#define BCM281XX_PIN_RGMII_GPIO_1 165
+#define BCM281XX_PIN_RGMII_GPIO_2 166
+#define BCM281XX_PIN_RGMII_GPIO_3 167
+#define BCM281XX_PIN_RTXDATA2G_TXDATA3G1 168
+#define BCM281XX_PIN_RTXEN2G_TXDATA3G2 169
+#define BCM281XX_PIN_RXDATA3G0 170
+#define BCM281XX_PIN_RXDATA3G1 171
+#define BCM281XX_PIN_RXDATA3G2 172
+#define BCM281XX_PIN_SDIO1_CLK 173
+#define BCM281XX_PIN_SDIO1_CMD 174
+#define BCM281XX_PIN_SDIO1_DATA_0 175
+#define BCM281XX_PIN_SDIO1_DATA_1 176
+#define BCM281XX_PIN_SDIO1_DATA_2 177
+#define BCM281XX_PIN_SDIO1_DATA_3 178
+#define BCM281XX_PIN_SDIO4_CLK 179
+#define BCM281XX_PIN_SDIO4_CMD 180
+#define BCM281XX_PIN_SDIO4_DATA_0 181
+#define BCM281XX_PIN_SDIO4_DATA_1 182
+#define BCM281XX_PIN_SDIO4_DATA_2 183
+#define BCM281XX_PIN_SDIO4_DATA_3 184
+#define BCM281XX_PIN_SIM_CLK 185
+#define BCM281XX_PIN_SIM_DATA 186
+#define BCM281XX_PIN_SIM_DET 187
+#define BCM281XX_PIN_SIM_RESETN 188
+#define BCM281XX_PIN_SIM2_CLK 189
+#define BCM281XX_PIN_SIM2_DATA 190
+#define BCM281XX_PIN_SIM2_DET 191
+#define BCM281XX_PIN_SIM2_RESETN 192
+#define BCM281XX_PIN_SRI_C 193
+#define BCM281XX_PIN_SRI_D 194
+#define BCM281XX_PIN_SRI_E 195
+#define BCM281XX_PIN_SSP_EXTCLK 196
+#define BCM281XX_PIN_SSP0_CLK 197
+#define BCM281XX_PIN_SSP0_FS 198
+#define BCM281XX_PIN_SSP0_RXD 199
+#define BCM281XX_PIN_SSP0_TXD 200
+#define BCM281XX_PIN_SSP2_CLK 201
+#define BCM281XX_PIN_SSP2_FS_0 202
+#define BCM281XX_PIN_SSP2_FS_1 203
+#define BCM281XX_PIN_SSP2_FS_2 204
+#define BCM281XX_PIN_SSP2_FS_3 205
+#define BCM281XX_PIN_SSP2_RXD_0 206
+#define BCM281XX_PIN_SSP2_RXD_1 207
+#define BCM281XX_PIN_SSP2_TXD_0 208
+#define BCM281XX_PIN_SSP2_TXD_1 209
+#define BCM281XX_PIN_SSP3_CLK 210
+#define BCM281XX_PIN_SSP3_FS 211
+#define BCM281XX_PIN_SSP3_RXD 212
+#define BCM281XX_PIN_SSP3_TXD 213
+#define BCM281XX_PIN_SSP4_CLK 214
+#define BCM281XX_PIN_SSP4_FS 215
+#define BCM281XX_PIN_SSP4_RXD 216
+#define BCM281XX_PIN_SSP4_TXD 217
+#define BCM281XX_PIN_SSP5_CLK 218
+#define BCM281XX_PIN_SSP5_FS 219
+#define BCM281XX_PIN_SSP5_RXD 220
+#define BCM281XX_PIN_SSP5_TXD 221
+#define BCM281XX_PIN_SSP6_CLK 222
+#define BCM281XX_PIN_SSP6_FS 223
+#define BCM281XX_PIN_SSP6_RXD 224
+#define BCM281XX_PIN_SSP6_TXD 225
+#define BCM281XX_PIN_STAT_1 226
+#define BCM281XX_PIN_STAT_2 227
+#define BCM281XX_PIN_SYSCLKEN 228
+#define BCM281XX_PIN_TRACECLK 229
+#define BCM281XX_PIN_TRACEDT00 230
+#define BCM281XX_PIN_TRACEDT01 231
+#define BCM281XX_PIN_TRACEDT02 232
+#define BCM281XX_PIN_TRACEDT03 233
+#define BCM281XX_PIN_TRACEDT04 234
+#define BCM281XX_PIN_TRACEDT05 235
+#define BCM281XX_PIN_TRACEDT06 236
+#define BCM281XX_PIN_TRACEDT07 237
+#define BCM281XX_PIN_TRACEDT08 238
+#define BCM281XX_PIN_TRACEDT09 239
+#define BCM281XX_PIN_TRACEDT10 240
+#define BCM281XX_PIN_TRACEDT11 241
+#define BCM281XX_PIN_TRACEDT12 242
+#define BCM281XX_PIN_TRACEDT13 243
+#define BCM281XX_PIN_TRACEDT14 244
+#define BCM281XX_PIN_TRACEDT15 245
+#define BCM281XX_PIN_TXDATA3G0 246
+#define BCM281XX_PIN_TXPWRIND 247
+#define BCM281XX_PIN_UARTB1_UCTS 248
+#define BCM281XX_PIN_UARTB1_URTS 249
+#define BCM281XX_PIN_UARTB1_URXD 250
+#define BCM281XX_PIN_UARTB1_UTXD 251
+#define BCM281XX_PIN_UARTB2_URXD 252
+#define BCM281XX_PIN_UARTB2_UTXD 253
+#define BCM281XX_PIN_UARTB3_UCTS 254
+#define BCM281XX_PIN_UARTB3_URTS 255
+#define BCM281XX_PIN_UARTB3_URXD 256
+#define BCM281XX_PIN_UARTB3_UTXD 257
+#define BCM281XX_PIN_UARTB4_UCTS 258
+#define BCM281XX_PIN_UARTB4_URTS 259
+#define BCM281XX_PIN_UARTB4_URXD 260
+#define BCM281XX_PIN_UARTB4_UTXD 261
+#define BCM281XX_PIN_VC_CAM1_SCL 262
+#define BCM281XX_PIN_VC_CAM1_SDA 263
+#define BCM281XX_PIN_VC_CAM2_SCL 264
+#define BCM281XX_PIN_VC_CAM2_SDA 265
+#define BCM281XX_PIN_VC_CAM3_SCL 266
+#define BCM281XX_PIN_VC_CAM3_SDA 267
+
+#define BCM281XX_PIN_DESC(a, b, c) \
+ { .number = a, .name = b, .drv_data = &c##_pin }
+
+/*
+ * Pin description definition. The order here must be the same as defined in
+ * the PADCTRLREG block in the RDB, since the pin number is used as an index
+ * into this array.
+ */
+static const struct pinctrl_pin_desc bcm281xx_pinctrl_pins[] = {
+ BCM281XX_PIN_DESC(BCM281XX_PIN_ADCSYNC, "adcsync", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_BAT_RM, "bat_rm", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SCL, "bsc1_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SDA, "bsc1_sda", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SCL, "bsc2_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SDA, "bsc2_sda", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLASSGPWR, "classgpwr", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLK_CX8, "clk_cx8", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_0, "clkout_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_1, "clkout_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_2, "clkout_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_3, "clkout_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_0, "clkreq_in_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_1, "clkreq_in_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ1, "cws_sys_req1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ2, "cws_sys_req2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ3, "cws_sys_req3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_CLK, "digmic1_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_DQ, "digmic1_dq", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_CLK, "digmic2_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_DQ, "digmic2_dq", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN13, "gpen13", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN14, "gpen14", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN15, "gpen15", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO00, "gpio00", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO01, "gpio01", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO02, "gpio02", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO03, "gpio03", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO04, "gpio04", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO05, "gpio05", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO06, "gpio06", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO07, "gpio07", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO08, "gpio08", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO09, "gpio09", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO10, "gpio10", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO11, "gpio11", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO12, "gpio12", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO13, "gpio13", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO14, "gpio14", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_PABLANK, "gps_pablank", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_TMARK, "gps_tmark", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SCL, "hdmi_scl", hdmi),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SDA, "hdmi_sda", hdmi),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DM, "ic_dm", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DP, "ic_dp", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_0, "kp_col_ip_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_1, "kp_col_ip_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_2, "kp_col_ip_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_3, "kp_col_ip_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_0, "kp_row_op_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_1, "kp_row_op_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_2, "kp_row_op_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_3, "kp_row_op_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_0, "lcd_b_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_1, "lcd_b_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_2, "lcd_b_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_3, "lcd_b_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_4, "lcd_b_4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_5, "lcd_b_5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_6, "lcd_b_6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_7, "lcd_b_7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_0, "lcd_g_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_1, "lcd_g_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_2, "lcd_g_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_3, "lcd_g_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_4, "lcd_g_4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_5, "lcd_g_5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_6, "lcd_g_6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_7, "lcd_g_7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_HSYNC, "lcd_hsync", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_OE, "lcd_oe", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_PCLK, "lcd_pclk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_0, "lcd_r_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_1, "lcd_r_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_2, "lcd_r_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_3, "lcd_r_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_4, "lcd_r_4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_5, "lcd_r_5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_6, "lcd_r_6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_7, "lcd_r_7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_VSYNC, "lcd_vsync", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO0, "mdmgpio0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO1, "mdmgpio1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO2, "mdmgpio2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO3, "mdmgpio3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO4, "mdmgpio4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO5, "mdmgpio5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO6, "mdmgpio6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO7, "mdmgpio7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO8, "mdmgpio8", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_0, "mphi_data_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_1, "mphi_data_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_2, "mphi_data_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_3, "mphi_data_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_4, "mphi_data_4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_5, "mphi_data_5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_6, "mphi_data_6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_7, "mphi_data_7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_8, "mphi_data_8", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_9, "mphi_data_9", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_10, "mphi_data_10", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_11, "mphi_data_11", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_12, "mphi_data_12", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_13, "mphi_data_13", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_14, "mphi_data_14", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_15, "mphi_data_15", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HA0, "mphi_ha0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT0, "mphi_hat0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT1, "mphi_hat1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE0_N, "mphi_hce0_n", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE1_N, "mphi_hce1_n", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HRD_N, "mphi_hrd_n", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HWR_N, "mphi_hwr_n", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN0, "mphi_run0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN1, "mphi_run1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_DATA, "mtx_scan_data", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_0, "nand_ad_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_1, "nand_ad_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_2, "nand_ad_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_3, "nand_ad_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_4, "nand_ad_4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_5, "nand_ad_5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_6, "nand_ad_6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_7, "nand_ad_7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_ALE, "nand_ale", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_0, "nand_cen_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_1, "nand_cen_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CLE, "nand_cle", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_OEN, "nand_oen", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_0, "nand_rdy_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_1, "nand_rdy_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WEN, "nand_wen", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WP, "nand_wp", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_PC1, "pc1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_PC2, "pc2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_INT, "pmu_int", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SCL, "pmu_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SDA, "pmu_sda", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g",
+ std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXC, "rgmii_0_rxc", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXC, "rgmii_0_txc", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXC, "rgmii_1_rxc", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXC, "rgmii_1_txc", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RTXDATA2G_TXDATA3G1,
+ "rtxdata2g_txdata3g1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2",
+ std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G0, "rxdata3g0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G1, "rxdata3g1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G2, "rxdata3g2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CLK, "sdio1_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CMD, "sdio1_cmd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_0, "sdio1_data_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_1, "sdio1_data_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_2, "sdio1_data_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_3, "sdio1_data_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CLK, "sdio4_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CMD, "sdio4_cmd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_0, "sdio4_data_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_1, "sdio4_data_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_2, "sdio4_data_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_3, "sdio4_data_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_CLK, "sim_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DATA, "sim_data", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DET, "sim_det", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_RESETN, "sim_resetn", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_CLK, "sim2_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DATA, "sim2_data", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DET, "sim2_det", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_RESETN, "sim2_resetn", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_C, "sri_c", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_D, "sri_d", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_E, "sri_e", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP_EXTCLK, "ssp_extclk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_CLK, "ssp0_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_FS, "ssp0_fs", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_RXD, "ssp0_rxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_TXD, "ssp0_txd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_CLK, "ssp2_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_0, "ssp2_fs_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_1, "ssp2_fs_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_2, "ssp2_fs_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_3, "ssp2_fs_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_0, "ssp2_rxd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_1, "ssp2_rxd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_0, "ssp2_txd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_1, "ssp2_txd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_CLK, "ssp3_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_FS, "ssp3_fs", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_RXD, "ssp3_rxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_TXD, "ssp3_txd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_CLK, "ssp4_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_FS, "ssp4_fs", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_RXD, "ssp4_rxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_TXD, "ssp4_txd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_CLK, "ssp5_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_FS, "ssp5_fs", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_RXD, "ssp5_rxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_TXD, "ssp5_txd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_CLK, "ssp6_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_FS, "ssp6_fs", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_RXD, "ssp6_rxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_TXD, "ssp6_txd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_1, "stat_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_2, "stat_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SYSCLKEN, "sysclken", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACECLK, "traceclk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT00, "tracedt00", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT01, "tracedt01", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT02, "tracedt02", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT03, "tracedt03", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT04, "tracedt04", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT05, "tracedt05", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT06, "tracedt06", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT07, "tracedt07", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT08, "tracedt08", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT09, "tracedt09", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT10, "tracedt10", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT11, "tracedt11", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT12, "tracedt12", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT13, "tracedt13", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT14, "tracedt14", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT15, "tracedt15", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TXDATA3G0, "txdata3g0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TXPWRIND, "txpwrind", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UCTS, "uartb1_ucts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URTS, "uartb1_urts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URXD, "uartb1_urxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UTXD, "uartb1_utxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_URXD, "uartb2_urxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_UTXD, "uartb2_utxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UCTS, "uartb3_ucts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URTS, "uartb3_urts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URXD, "uartb3_urxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UTXD, "uartb3_utxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UCTS, "uartb4_ucts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URTS, "uartb4_urts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URXD, "uartb4_urxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UTXD, "uartb4_utxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c),
+};
+
+static const char * const bcm281xx_alt_groups[] = {
+ "adcsync",
+ "bat_rm",
+ "bsc1_scl",
+ "bsc1_sda",
+ "bsc2_scl",
+ "bsc2_sda",
+ "classgpwr",
+ "clk_cx8",
+ "clkout_0",
+ "clkout_1",
+ "clkout_2",
+ "clkout_3",
+ "clkreq_in_0",
+ "clkreq_in_1",
+ "cws_sys_req1",
+ "cws_sys_req2",
+ "cws_sys_req3",
+ "digmic1_clk",
+ "digmic1_dq",
+ "digmic2_clk",
+ "digmic2_dq",
+ "gpen13",
+ "gpen14",
+ "gpen15",
+ "gpio00",
+ "gpio01",
+ "gpio02",
+ "gpio03",
+ "gpio04",
+ "gpio05",
+ "gpio06",
+ "gpio07",
+ "gpio08",
+ "gpio09",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gps_pablank",
+ "gps_tmark",
+ "hdmi_scl",
+ "hdmi_sda",
+ "ic_dm",
+ "ic_dp",
+ "kp_col_ip_0",
+ "kp_col_ip_1",
+ "kp_col_ip_2",
+ "kp_col_ip_3",
+ "kp_row_op_0",
+ "kp_row_op_1",
+ "kp_row_op_2",
+ "kp_row_op_3",
+ "lcd_b_0",
+ "lcd_b_1",
+ "lcd_b_2",
+ "lcd_b_3",
+ "lcd_b_4",
+ "lcd_b_5",
+ "lcd_b_6",
+ "lcd_b_7",
+ "lcd_g_0",
+ "lcd_g_1",
+ "lcd_g_2",
+ "lcd_g_3",
+ "lcd_g_4",
+ "lcd_g_5",
+ "lcd_g_6",
+ "lcd_g_7",
+ "lcd_hsync",
+ "lcd_oe",
+ "lcd_pclk",
+ "lcd_r_0",
+ "lcd_r_1",
+ "lcd_r_2",
+ "lcd_r_3",
+ "lcd_r_4",
+ "lcd_r_5",
+ "lcd_r_6",
+ "lcd_r_7",
+ "lcd_vsync",
+ "mdmgpio0",
+ "mdmgpio1",
+ "mdmgpio2",
+ "mdmgpio3",
+ "mdmgpio4",
+ "mdmgpio5",
+ "mdmgpio6",
+ "mdmgpio7",
+ "mdmgpio8",
+ "mphi_data_0",
+ "mphi_data_1",
+ "mphi_data_2",
+ "mphi_data_3",
+ "mphi_data_4",
+ "mphi_data_5",
+ "mphi_data_6",
+ "mphi_data_7",
+ "mphi_data_8",
+ "mphi_data_9",
+ "mphi_data_10",
+ "mphi_data_11",
+ "mphi_data_12",
+ "mphi_data_13",
+ "mphi_data_14",
+ "mphi_data_15",
+ "mphi_ha0",
+ "mphi_hat0",
+ "mphi_hat1",
+ "mphi_hce0_n",
+ "mphi_hce1_n",
+ "mphi_hrd_n",
+ "mphi_hwr_n",
+ "mphi_run0",
+ "mphi_run1",
+ "mtx_scan_clk",
+ "mtx_scan_data",
+ "nand_ad_0",
+ "nand_ad_1",
+ "nand_ad_2",
+ "nand_ad_3",
+ "nand_ad_4",
+ "nand_ad_5",
+ "nand_ad_6",
+ "nand_ad_7",
+ "nand_ale",
+ "nand_cen_0",
+ "nand_cen_1",
+ "nand_cle",
+ "nand_oen",
+ "nand_rdy_0",
+ "nand_rdy_1",
+ "nand_wen",
+ "nand_wp",
+ "pc1",
+ "pc2",
+ "pmu_int",
+ "pmu_scl",
+ "pmu_sda",
+ "rfst2g_mtsloten3g",
+ "rgmii_0_rx_ctl",
+ "rgmii_0_rxc",
+ "rgmii_0_rxd_0",
+ "rgmii_0_rxd_1",
+ "rgmii_0_rxd_2",
+ "rgmii_0_rxd_3",
+ "rgmii_0_tx_ctl",
+ "rgmii_0_txc",
+ "rgmii_0_txd_0",
+ "rgmii_0_txd_1",
+ "rgmii_0_txd_2",
+ "rgmii_0_txd_3",
+ "rgmii_1_rx_ctl",
+ "rgmii_1_rxc",
+ "rgmii_1_rxd_0",
+ "rgmii_1_rxd_1",
+ "rgmii_1_rxd_2",
+ "rgmii_1_rxd_3",
+ "rgmii_1_tx_ctl",
+ "rgmii_1_txc",
+ "rgmii_1_txd_0",
+ "rgmii_1_txd_1",
+ "rgmii_1_txd_2",
+ "rgmii_1_txd_3",
+ "rgmii_gpio_0",
+ "rgmii_gpio_1",
+ "rgmii_gpio_2",
+ "rgmii_gpio_3",
+ "rtxdata2g_txdata3g1",
+ "rtxen2g_txdata3g2",
+ "rxdata3g0",
+ "rxdata3g1",
+ "rxdata3g2",
+ "sdio1_clk",
+ "sdio1_cmd",
+ "sdio1_data_0",
+ "sdio1_data_1",
+ "sdio1_data_2",
+ "sdio1_data_3",
+ "sdio4_clk",
+ "sdio4_cmd",
+ "sdio4_data_0",
+ "sdio4_data_1",
+ "sdio4_data_2",
+ "sdio4_data_3",
+ "sim_clk",
+ "sim_data",
+ "sim_det",
+ "sim_resetn",
+ "sim2_clk",
+ "sim2_data",
+ "sim2_det",
+ "sim2_resetn",
+ "sri_c",
+ "sri_d",
+ "sri_e",
+ "ssp_extclk",
+ "ssp0_clk",
+ "ssp0_fs",
+ "ssp0_rxd",
+ "ssp0_txd",
+ "ssp2_clk",
+ "ssp2_fs_0",
+ "ssp2_fs_1",
+ "ssp2_fs_2",
+ "ssp2_fs_3",
+ "ssp2_rxd_0",
+ "ssp2_rxd_1",
+ "ssp2_txd_0",
+ "ssp2_txd_1",
+ "ssp3_clk",
+ "ssp3_fs",
+ "ssp3_rxd",
+ "ssp3_txd",
+ "ssp4_clk",
+ "ssp4_fs",
+ "ssp4_rxd",
+ "ssp4_txd",
+ "ssp5_clk",
+ "ssp5_fs",
+ "ssp5_rxd",
+ "ssp5_txd",
+ "ssp6_clk",
+ "ssp6_fs",
+ "ssp6_rxd",
+ "ssp6_txd",
+ "stat_1",
+ "stat_2",
+ "sysclken",
+ "traceclk",
+ "tracedt00",
+ "tracedt01",
+ "tracedt02",
+ "tracedt03",
+ "tracedt04",
+ "tracedt05",
+ "tracedt06",
+ "tracedt07",
+ "tracedt08",
+ "tracedt09",
+ "tracedt10",
+ "tracedt11",
+ "tracedt12",
+ "tracedt13",
+ "tracedt14",
+ "tracedt15",
+ "txdata3g0",
+ "txpwrind",
+ "uartb1_ucts",
+ "uartb1_urts",
+ "uartb1_urxd",
+ "uartb1_utxd",
+ "uartb2_urxd",
+ "uartb2_utxd",
+ "uartb3_ucts",
+ "uartb3_urts",
+ "uartb3_urxd",
+ "uartb3_utxd",
+ "uartb4_ucts",
+ "uartb4_urts",
+ "uartb4_urxd",
+ "uartb4_utxd",
+ "vc_cam1_scl",
+ "vc_cam1_sda",
+ "vc_cam2_scl",
+ "vc_cam2_sda",
+ "vc_cam3_scl",
+ "vc_cam3_sda",
+};
+
+/* Every pin can implement all ALT1-ALT4 functions */
+#define BCM281XX_PIN_FUNCTION(fcn_name) \
+{ \
+ .name = #fcn_name, \
+ .groups = bcm281xx_alt_groups, \
+ .ngroups = ARRAY_SIZE(bcm281xx_alt_groups), \
+}
+
+static const struct bcm281xx_pin_function bcm281xx_functions[] = {
+ BCM281XX_PIN_FUNCTION(alt1),
+ BCM281XX_PIN_FUNCTION(alt2),
+ BCM281XX_PIN_FUNCTION(alt3),
+ BCM281XX_PIN_FUNCTION(alt4),
+};
+
+static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = {
+ .pins = bcm281xx_pinctrl_pins,
+ .npins = ARRAY_SIZE(bcm281xx_pinctrl_pins),
+ .functions = bcm281xx_functions,
+ .nfunctions = ARRAY_SIZE(bcm281xx_functions),
+};
+
+static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev,
+ unsigned pin)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ if (pin >= pdata->npins)
+ return BCM281XX_PIN_TYPE_UNKNOWN;
+
+ return *(enum bcm281xx_pin_type *)(pdata->pins[pin].drv_data);
+}
+
+#define BCM281XX_PIN_SHIFT(type, param) \
+ (BCM281XX_ ## type ## _PIN_REG_ ## param ## _SHIFT)
+
+#define BCM281XX_PIN_MASK(type, param) \
+ (BCM281XX_ ## type ## _PIN_REG_ ## param ## _MASK)
+
+/*
+ * This helper function is used to build up the value and mask used to write to
+ * a pin register, but does not actually write to the register.
+ */
+static inline void bcm281xx_pin_update(u32 *reg_val, u32 *reg_mask,
+ u32 param_val, u32 param_shift,
+ u32 param_mask)
+{
+ *reg_val &= ~param_mask;
+ *reg_val |= (param_val << param_shift) & param_mask;
+ *reg_mask |= param_mask;
+}
+
+static struct regmap_config bcm281xx_pinctrl_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = BCM281XX_PIN_VC_CAM3_SDA,
+};
+
+static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ return pdata->npins;
+}
+
+static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ return pdata->pins[group].name;
+}
+
+static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = &pdata->pins[group].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s,
+ unsigned offset)
+{
+ seq_printf(s, " %s", dev_name(pctldev->dev));
+}
+
+static struct pinctrl_ops bcm281xx_pinctrl_ops = {
+ .get_groups_count = bcm281xx_pinctrl_get_groups_count,
+ .get_group_name = bcm281xx_pinctrl_get_group_name,
+ .get_group_pins = bcm281xx_pinctrl_get_group_pins,
+ .pin_dbg_show = bcm281xx_pinctrl_pin_dbg_show,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ return pdata->nfunctions;
+}
+
+static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
+ unsigned function)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ return pdata->functions[function].name;
+}
+
+static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
+ unsigned function,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pdata->functions[function].groups;
+ *num_groups = pdata->functions[function].ngroups;
+
+ return 0;
+}
+
+static int bcm281xx_pinmux_set(struct pinctrl_dev *pctldev,
+ unsigned function,
+ unsigned group)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm281xx_pin_function *f = &pdata->functions[function];
+ u32 offset = 4 * pdata->pins[group].number;
+ int rc = 0;
+
+ dev_dbg(pctldev->dev,
+ "%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n",
+ __func__, f->name, function, pdata->pins[group].name,
+ pdata->pins[group].number, offset);
+
+ rc = regmap_update_bits(pdata->regmap, offset,
+ BCM281XX_PIN_REG_F_SEL_MASK,
+ function << BCM281XX_PIN_REG_F_SEL_SHIFT);
+ if (rc)
+ dev_err(pctldev->dev,
+ "Error updating register for pin %s (%d).\n",
+ pdata->pins[group].name, pdata->pins[group].number);
+
+ return rc;
+}
+
+static struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = {
+ .get_functions_count = bcm281xx_pinctrl_get_fcns_count,
+ .get_function_name = bcm281xx_pinctrl_get_fcn_name,
+ .get_function_groups = bcm281xx_pinctrl_get_fcn_groups,
+ .set_mux = bcm281xx_pinmux_set,
+};
+
+static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *config)
+{
+ return -ENOTSUPP;
+}
+
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *configs,
+ unsigned num_configs,
+ u32 *val,
+ u32 *mask)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+ int i;
+ enum pin_config_param param;
+ u16 arg;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+ arg = (arg >= 1 ? 1 : 0);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(STD, HYST),
+ BCM281XX_PIN_MASK(STD, HYST));
+ break;
+ /*
+ * The pin bias can only be one of pull-up, pull-down, or
+ * disable. The user does not need to specify a value for the
+ * property, and the default value from pinconf-generic is
+ * ignored.
+ */
+ case PIN_CONFIG_BIAS_DISABLE:
+ bcm281xx_pin_update(val, mask, 0,
+ BCM281XX_PIN_SHIFT(STD, PULL_UP),
+ BCM281XX_PIN_MASK(STD, PULL_UP));
+ bcm281xx_pin_update(val, mask, 0,
+ BCM281XX_PIN_SHIFT(STD, PULL_DN),
+ BCM281XX_PIN_MASK(STD, PULL_DN));
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_UP:
+ bcm281xx_pin_update(val, mask, 1,
+ BCM281XX_PIN_SHIFT(STD, PULL_UP),
+ BCM281XX_PIN_MASK(STD, PULL_UP));
+ bcm281xx_pin_update(val, mask, 0,
+ BCM281XX_PIN_SHIFT(STD, PULL_DN),
+ BCM281XX_PIN_MASK(STD, PULL_DN));
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ bcm281xx_pin_update(val, mask, 0,
+ BCM281XX_PIN_SHIFT(STD, PULL_UP),
+ BCM281XX_PIN_MASK(STD, PULL_UP));
+ bcm281xx_pin_update(val, mask, 1,
+ BCM281XX_PIN_SHIFT(STD, PULL_DN),
+ BCM281XX_PIN_MASK(STD, PULL_DN));
+ break;
+
+ case PIN_CONFIG_SLEW_RATE:
+ arg = (arg >= 1 ? 1 : 0);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(STD, SLEW),
+ BCM281XX_PIN_MASK(STD, SLEW));
+ break;
+
+ case PIN_CONFIG_INPUT_ENABLE:
+ /* inversed since register is for input _disable_ */
+ arg = (arg >= 1 ? 0 : 1);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(STD, INPUT_DIS),
+ BCM281XX_PIN_MASK(STD, INPUT_DIS));
+ break;
+
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ /* Valid range is 2-16 mA, even numbers only */
+ if ((arg < 2) || (arg > 16) || (arg % 2)) {
+ dev_err(pctldev->dev,
+ "Invalid Drive Strength value (%d) for "
+ "pin %s (%d). Valid values are "
+ "(2..16) mA, even numbers only.\n",
+ arg, pdata->pins[pin].name, pin);
+ return -EINVAL;
+ }
+ bcm281xx_pin_update(val, mask, (arg/2)-1,
+ BCM281XX_PIN_SHIFT(STD, DRV_STR),
+ BCM281XX_PIN_MASK(STD, DRV_STR));
+ break;
+
+ default:
+ dev_err(pctldev->dev,
+ "Unrecognized pin config %d for pin %s (%d).\n",
+ param, pdata->pins[pin].name, pin);
+ return -EINVAL;
+
+ } /* switch config */
+ } /* for each config */
+
+ return 0;
+}
+
+/*
+ * The pull-up strength for an I2C pin is represented by bits 4-6 in the
+ * register with the following mapping:
+ * 0b000: No pull-up
+ * 0b001: 1200 Ohm
+ * 0b010: 1800 Ohm
+ * 0b011: 720 Ohm
+ * 0b100: 2700 Ohm
+ * 0b101: 831 Ohm
+ * 0b110: 1080 Ohm
+ * 0b111: 568 Ohm
+ * This array maps pull-up strength in Ohms to register values (1+index).
+ */
+static const u16 bcm281xx_pullup_map[] = {
+ 1200, 1800, 720, 2700, 831, 1080, 568
+};
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *configs,
+ unsigned num_configs,
+ u32 *val,
+ u32 *mask)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+ int i, j;
+ enum pin_config_param param;
+ u16 arg;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_PULL_UP:
+ for (j = 0; j < ARRAY_SIZE(bcm281xx_pullup_map); j++)
+ if (bcm281xx_pullup_map[j] == arg)
+ break;
+
+ if (j == ARRAY_SIZE(bcm281xx_pullup_map)) {
+ dev_err(pctldev->dev,
+ "Invalid pull-up value (%d) for pin %s "
+ "(%d). Valid values are 568, 720, 831, "
+ "1080, 1200, 1800, 2700 Ohms.\n",
+ arg, pdata->pins[pin].name, pin);
+ return -EINVAL;
+ }
+
+ bcm281xx_pin_update(val, mask, j+1,
+ BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
+ BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
+ break;
+
+ case PIN_CONFIG_BIAS_DISABLE:
+ bcm281xx_pin_update(val, mask, 0,
+ BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
+ BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
+ break;
+
+ case PIN_CONFIG_SLEW_RATE:
+ arg = (arg >= 1 ? 1 : 0);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(I2C, SLEW),
+ BCM281XX_PIN_MASK(I2C, SLEW));
+ break;
+
+ case PIN_CONFIG_INPUT_ENABLE:
+ /* inversed since register is for input _disable_ */
+ arg = (arg >= 1 ? 0 : 1);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(I2C, INPUT_DIS),
+ BCM281XX_PIN_MASK(I2C, INPUT_DIS));
+ break;
+
+ default:
+ dev_err(pctldev->dev,
+ "Unrecognized pin config %d for pin %s (%d).\n",
+ param, pdata->pins[pin].name, pin);
+ return -EINVAL;
+
+ } /* switch config */
+ } /* for each config */
+
+ return 0;
+}
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *configs,
+ unsigned num_configs,
+ u32 *val,
+ u32 *mask)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+ int i;
+ enum pin_config_param param;
+ u16 arg;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_SLEW_RATE:
+ arg = (arg >= 1 ? 1 : 0);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(HDMI, MODE),
+ BCM281XX_PIN_MASK(HDMI, MODE));
+ break;
+
+ case PIN_CONFIG_INPUT_ENABLE:
+ /* inversed since register is for input _disable_ */
+ arg = (arg >= 1 ? 0 : 1);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(HDMI, INPUT_DIS),
+ BCM281XX_PIN_MASK(HDMI, INPUT_DIS));
+ break;
+
+ default:
+ dev_err(pctldev->dev,
+ "Unrecognized pin config %d for pin %s (%d).\n",
+ param, pdata->pins[pin].name, pin);
+ return -EINVAL;
+
+ } /* switch config */
+ } /* for each config */
+
+ return 0;
+}
+
+static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *configs,
+ unsigned num_configs)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+ enum bcm281xx_pin_type pin_type;
+ u32 offset = 4 * pin;
+ u32 cfg_val, cfg_mask;
+ int rc;
+
+ cfg_val = 0;
+ cfg_mask = 0;
+ pin_type = pin_type_get(pctldev, pin);
+
+ /* Different pins have different configuration options */
+ switch (pin_type) {
+ case BCM281XX_PIN_TYPE_STD:
+ rc = bcm281xx_std_pin_update(pctldev, pin, configs,
+ num_configs, &cfg_val, &cfg_mask);
+ break;
+
+ case BCM281XX_PIN_TYPE_I2C:
+ rc = bcm281xx_i2c_pin_update(pctldev, pin, configs,
+ num_configs, &cfg_val, &cfg_mask);
+ break;
+
+ case BCM281XX_PIN_TYPE_HDMI:
+ rc = bcm281xx_hdmi_pin_update(pctldev, pin, configs,
+ num_configs, &cfg_val, &cfg_mask);
+ break;
+
+ default:
+ dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n",
+ pdata->pins[pin].name, pin);
+ return -EINVAL;
+
+ } /* switch pin type */
+
+ if (rc)
+ return rc;
+
+ dev_dbg(pctldev->dev,
+ "%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n",
+ __func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask);
+
+ rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val);
+ if (rc) {
+ dev_err(pctldev->dev,
+ "Error updating register for pin %s (%d).\n",
+ pdata->pins[pin].name, pin);
+ return rc;
+ }
+
+ return 0;
+}
+
+static struct pinconf_ops bcm281xx_pinctrl_pinconf_ops = {
+ .pin_config_get = bcm281xx_pinctrl_pin_config_get,
+ .pin_config_set = bcm281xx_pinctrl_pin_config_set,
+};
+
+static struct pinctrl_desc bcm281xx_pinctrl_desc = {
+ /* name, pins, npins members initialized in probe function */
+ .pctlops = &bcm281xx_pinctrl_ops,
+ .pmxops = &bcm281xx_pinctrl_pinmux_ops,
+ .confops = &bcm281xx_pinctrl_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+static int __init bcm281xx_pinctrl_probe(struct platform_device *pdev)
+{
+ struct bcm281xx_pinctrl_data *pdata = &bcm281xx_pinctrl;
+ struct resource *res;
+ struct pinctrl_dev *pctl;
+
+ /* So far We can assume there is only 1 bank of registers */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pdata->reg_base)) {
+ dev_err(&pdev->dev, "Failed to ioremap MEM resource\n");
+ return -ENODEV;
+ }
+
+ /* Initialize the dynamic part of pinctrl_desc */
+ pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base,
+ &bcm281xx_pinctrl_regmap_config);
+ if (IS_ERR(pdata->regmap)) {
+ dev_err(&pdev->dev, "Regmap MMIO init failed.\n");
+ return -ENODEV;
+ }
+
+ bcm281xx_pinctrl_desc.name = dev_name(&pdev->dev);
+ bcm281xx_pinctrl_desc.pins = bcm281xx_pinctrl.pins;
+ bcm281xx_pinctrl_desc.npins = bcm281xx_pinctrl.npins;
+
+ pctl = pinctrl_register(&bcm281xx_pinctrl_desc,
+ &pdev->dev,
+ pdata);
+ if (!pctl) {
+ dev_err(&pdev->dev, "Failed to register pinctrl\n");
+ return -ENODEV;
+ }
+
+ platform_set_drvdata(pdev, pdata);
+
+ return 0;
+}
+
+static struct of_device_id bcm281xx_pinctrl_of_match[] = {
+ { .compatible = "brcm,bcm11351-pinctrl", },
+ { },
+};
+
+static struct platform_driver bcm281xx_pinctrl_driver = {
+ .driver = {
+ .name = "bcm281xx-pinctrl",
+ .of_match_table = bcm281xx_pinctrl_of_match,
+ },
+};
+
+module_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe);
+
+MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
+MODULE_AUTHOR("Sherman Yin <syin@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom BCM281xx pinctrl driver");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,1072 @@
+/*
+ * Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
+ *
+ * This driver is inspired by:
+ * pinctrl-nomadik.c, please see original file for copyright information
+ * pinctrl-tegra.c, please see original file for copyright information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define MODULE_NAME "pinctrl-bcm2835"
+#define BCM2835_NUM_GPIOS 54
+#define BCM2835_NUM_BANKS 2
+
+#define BCM2835_PIN_BITMAP_SZ \
+ DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
+
+/* GPIO register offsets */
+#define GPFSEL0 0x0 /* Function Select */
+#define GPSET0 0x1c /* Pin Output Set */
+#define GPCLR0 0x28 /* Pin Output Clear */
+#define GPLEV0 0x34 /* Pin Level */
+#define GPEDS0 0x40 /* Pin Event Detect Status */
+#define GPREN0 0x4c /* Pin Rising Edge Detect Enable */
+#define GPFEN0 0x58 /* Pin Falling Edge Detect Enable */
+#define GPHEN0 0x64 /* Pin High Detect Enable */
+#define GPLEN0 0x70 /* Pin Low Detect Enable */
+#define GPAREN0 0x7c /* Pin Async Rising Edge Detect */
+#define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */
+#define GPPUD 0x94 /* Pin Pull-up/down Enable */
+#define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */
+
+#define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4))
+#define FSEL_SHIFT(p) (((p) % 10) * 3)
+#define GPIO_REG_OFFSET(p) ((p) / 32)
+#define GPIO_REG_SHIFT(p) ((p) % 32)
+
+enum bcm2835_pinconf_param {
+ /* argument: bcm2835_pinconf_pull */
+ BCM2835_PINCONF_PARAM_PULL,
+};
+
+enum bcm2835_pinconf_pull {
+ BCM2835_PINCONFIG_PULL_NONE,
+ BCM2835_PINCONFIG_PULL_DOWN,
+ BCM2835_PINCONFIG_PULL_UP,
+};
+
+#define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
+#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
+#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
+
+struct bcm2835_gpio_irqdata {
+ struct bcm2835_pinctrl *pc;
+ int bank;
+};
+
+struct bcm2835_pinctrl {
+ struct device *dev;
+ void __iomem *base;
+ int irq[BCM2835_NUM_BANKS];
+
+ /* note: locking assumes each bank will have its own unsigned long */
+ unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
+ unsigned int irq_type[BCM2835_NUM_GPIOS];
+
+ struct pinctrl_dev *pctl_dev;
+ struct irq_domain *irq_domain;
+ struct gpio_chip gpio_chip;
+ struct pinctrl_gpio_range gpio_range;
+
+ struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS];
+ spinlock_t irq_lock[BCM2835_NUM_BANKS];
+};
+
+static struct lock_class_key gpio_lock_class;
+
+/* pins are just named GPIO0..GPIO53 */
+#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
+static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
+ BCM2835_GPIO_PIN(0),
+ BCM2835_GPIO_PIN(1),
+ BCM2835_GPIO_PIN(2),
+ BCM2835_GPIO_PIN(3),
+ BCM2835_GPIO_PIN(4),
+ BCM2835_GPIO_PIN(5),
+ BCM2835_GPIO_PIN(6),
+ BCM2835_GPIO_PIN(7),
+ BCM2835_GPIO_PIN(8),
+ BCM2835_GPIO_PIN(9),
+ BCM2835_GPIO_PIN(10),
+ BCM2835_GPIO_PIN(11),
+ BCM2835_GPIO_PIN(12),
+ BCM2835_GPIO_PIN(13),
+ BCM2835_GPIO_PIN(14),
+ BCM2835_GPIO_PIN(15),
+ BCM2835_GPIO_PIN(16),
+ BCM2835_GPIO_PIN(17),
+ BCM2835_GPIO_PIN(18),
+ BCM2835_GPIO_PIN(19),
+ BCM2835_GPIO_PIN(20),
+ BCM2835_GPIO_PIN(21),
+ BCM2835_GPIO_PIN(22),
+ BCM2835_GPIO_PIN(23),
+ BCM2835_GPIO_PIN(24),
+ BCM2835_GPIO_PIN(25),
+ BCM2835_GPIO_PIN(26),
+ BCM2835_GPIO_PIN(27),
+ BCM2835_GPIO_PIN(28),
+ BCM2835_GPIO_PIN(29),
+ BCM2835_GPIO_PIN(30),
+ BCM2835_GPIO_PIN(31),
+ BCM2835_GPIO_PIN(32),
+ BCM2835_GPIO_PIN(33),
+ BCM2835_GPIO_PIN(34),
+ BCM2835_GPIO_PIN(35),
+ BCM2835_GPIO_PIN(36),
+ BCM2835_GPIO_PIN(37),
+ BCM2835_GPIO_PIN(38),
+ BCM2835_GPIO_PIN(39),
+ BCM2835_GPIO_PIN(40),
+ BCM2835_GPIO_PIN(41),
+ BCM2835_GPIO_PIN(42),
+ BCM2835_GPIO_PIN(43),
+ BCM2835_GPIO_PIN(44),
+ BCM2835_GPIO_PIN(45),
+ BCM2835_GPIO_PIN(46),
+ BCM2835_GPIO_PIN(47),
+ BCM2835_GPIO_PIN(48),
+ BCM2835_GPIO_PIN(49),
+ BCM2835_GPIO_PIN(50),
+ BCM2835_GPIO_PIN(51),
+ BCM2835_GPIO_PIN(52),
+ BCM2835_GPIO_PIN(53),
+};
+
+/* one pin per group */
+static const char * const bcm2835_gpio_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+ "gpio24",
+ "gpio25",
+ "gpio26",
+ "gpio27",
+ "gpio28",
+ "gpio29",
+ "gpio30",
+ "gpio31",
+ "gpio32",
+ "gpio33",
+ "gpio34",
+ "gpio35",
+ "gpio36",
+ "gpio37",
+ "gpio38",
+ "gpio39",
+ "gpio40",
+ "gpio41",
+ "gpio42",
+ "gpio43",
+ "gpio44",
+ "gpio45",
+ "gpio46",
+ "gpio47",
+ "gpio48",
+ "gpio49",
+ "gpio50",
+ "gpio51",
+ "gpio52",
+ "gpio53",
+};
+
+enum bcm2835_fsel {
+ BCM2835_FSEL_GPIO_IN = 0,
+ BCM2835_FSEL_GPIO_OUT = 1,
+ BCM2835_FSEL_ALT0 = 4,
+ BCM2835_FSEL_ALT1 = 5,
+ BCM2835_FSEL_ALT2 = 6,
+ BCM2835_FSEL_ALT3 = 7,
+ BCM2835_FSEL_ALT4 = 3,
+ BCM2835_FSEL_ALT5 = 2,
+ BCM2835_FSEL_COUNT = 8,
+ BCM2835_FSEL_MASK = 0x7,
+};
+
+static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = {
+ [BCM2835_FSEL_GPIO_IN] = "gpio_in",
+ [BCM2835_FSEL_GPIO_OUT] = "gpio_out",
+ [BCM2835_FSEL_ALT0] = "alt0",
+ [BCM2835_FSEL_ALT1] = "alt1",
+ [BCM2835_FSEL_ALT2] = "alt2",
+ [BCM2835_FSEL_ALT3] = "alt3",
+ [BCM2835_FSEL_ALT4] = "alt4",
+ [BCM2835_FSEL_ALT5] = "alt5",
+};
+
+static const char * const irq_type_names[] = {
+ [IRQ_TYPE_NONE] = "none",
+ [IRQ_TYPE_EDGE_RISING] = "edge-rising",
+ [IRQ_TYPE_EDGE_FALLING] = "edge-falling",
+ [IRQ_TYPE_EDGE_BOTH] = "edge-both",
+ [IRQ_TYPE_LEVEL_HIGH] = "level-high",
+ [IRQ_TYPE_LEVEL_LOW] = "level-low",
+};
+
+static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg)
+{
+ return readl(pc->base + reg);
+}
+
+static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg,
+ u32 val)
+{
+ writel(val, pc->base + reg);
+}
+
+static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg,
+ unsigned bit)
+{
+ reg += GPIO_REG_OFFSET(bit) * 4;
+ return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1;
+}
+
+/* note NOT a read/modify/write cycle */
+static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc,
+ unsigned reg, unsigned bit)
+{
+ reg += GPIO_REG_OFFSET(bit) * 4;
+ bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit)));
+}
+
+static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get(
+ struct bcm2835_pinctrl *pc, unsigned pin)
+{
+ u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
+ enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
+
+ dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin,
+ bcm2835_functions[status]);
+
+ return status;
+}
+
+static inline void bcm2835_pinctrl_fsel_set(
+ struct bcm2835_pinctrl *pc, unsigned pin,
+ enum bcm2835_fsel fsel)
+{
+ u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
+ enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
+
+ dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin,
+ bcm2835_functions[cur]);
+
+ if (cur == fsel)
+ return;
+
+ if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) {
+ /* always transition through GPIO_IN */
+ val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
+ val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin);
+
+ dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin,
+ bcm2835_functions[BCM2835_FSEL_GPIO_IN]);
+ bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
+ }
+
+ val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
+ val |= fsel << FSEL_SHIFT(pin);
+
+ dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin,
+ bcm2835_functions[fsel]);
+ bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
+}
+
+static int bcm2835_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_request_gpio(chip->base + offset);
+}
+
+static void bcm2835_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(chip->base + offset);
+}
+
+static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
+
+ return bcm2835_gpio_get_bit(pc, GPLEV0, offset);
+}
+
+static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
+static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
+
+ bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset);
+}
+
+static int bcm2835_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
+
+ return irq_linear_revmap(pc->irq_domain, offset);
+}
+
+static struct gpio_chip bcm2835_gpio_chip = {
+ .label = MODULE_NAME,
+ .owner = THIS_MODULE,
+ .request = bcm2835_gpio_request,
+ .free = bcm2835_gpio_free,
+ .direction_input = bcm2835_gpio_direction_input,
+ .direction_output = bcm2835_gpio_direction_output,
+ .get = bcm2835_gpio_get,
+ .set = bcm2835_gpio_set,
+ .to_irq = bcm2835_gpio_to_irq,
+ .base = -1,
+ .ngpio = BCM2835_NUM_GPIOS,
+ .can_sleep = false,
+};
+
+static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
+{
+ struct bcm2835_gpio_irqdata *irqdata = dev_id;
+ struct bcm2835_pinctrl *pc = irqdata->pc;
+ int bank = irqdata->bank;
+ unsigned long events;
+ unsigned offset;
+ unsigned gpio;
+ unsigned int type;
+
+ events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
+ events &= pc->enabled_irq_map[bank];
+ for_each_set_bit(offset, &events, 32) {
+ gpio = (32 * bank) + offset;
+ type = pc->irq_type[gpio];
+
+ /* ack edge triggered IRQs immediately */
+ if (!(type & IRQ_TYPE_LEVEL_MASK))
+ bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
+
+ generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio));
+
+ /* ack level triggered IRQ after handling them */
+ if (type & IRQ_TYPE_LEVEL_MASK)
+ bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
+ }
+ return events ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
+ unsigned reg, unsigned offset, bool enable)
+{
+ u32 value;
+ reg += GPIO_REG_OFFSET(offset) * 4;
+ value = bcm2835_gpio_rd(pc, reg);
+ if (enable)
+ value |= BIT(GPIO_REG_SHIFT(offset));
+ else
+ value &= ~(BIT(GPIO_REG_SHIFT(offset)));
+ bcm2835_gpio_wr(pc, reg, value);
+}
+
+/* fast path for IRQ handler */
+static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
+ unsigned offset, bool enable)
+{
+ switch (pc->irq_type[offset]) {
+ case IRQ_TYPE_EDGE_RISING:
+ __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
+ __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ __bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable);
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ __bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable);
+ break;
+ }
+}
+
+static void bcm2835_gpio_irq_enable(struct irq_data *data)
+{
+ struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
+ unsigned gpio = irqd_to_hwirq(data);
+ unsigned offset = GPIO_REG_SHIFT(gpio);
+ unsigned bank = GPIO_REG_OFFSET(gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pc->irq_lock[bank], flags);
+ set_bit(offset, &pc->enabled_irq_map[bank]);
+ bcm2835_gpio_irq_config(pc, gpio, true);
+ spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+}
+
+static void bcm2835_gpio_irq_disable(struct irq_data *data)
+{
+ struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
+ unsigned gpio = irqd_to_hwirq(data);
+ unsigned offset = GPIO_REG_SHIFT(gpio);
+ unsigned bank = GPIO_REG_OFFSET(gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pc->irq_lock[bank], flags);
+ bcm2835_gpio_irq_config(pc, gpio, false);
+ clear_bit(offset, &pc->enabled_irq_map[bank]);
+ spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+}
+
+static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc,
+ unsigned offset, unsigned int type)
+{
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
+ case IRQ_TYPE_EDGE_BOTH:
+ case IRQ_TYPE_LEVEL_HIGH:
+ case IRQ_TYPE_LEVEL_LOW:
+ pc->irq_type[offset] = type;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* slower path for reconfiguring IRQ type */
+static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc,
+ unsigned offset, unsigned int type)
+{
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ if (pc->irq_type[offset] != type) {
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ }
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
+ /* RISING already enabled, disable FALLING */
+ pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ } else if (pc->irq_type[offset] != type) {
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ }
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
+ /* FALLING already enabled, disable RISING */
+ pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ } else if (pc->irq_type[offset] != type) {
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ }
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) {
+ /* RISING already enabled, enable FALLING too */
+ pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ pc->irq_type[offset] = type;
+ } else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) {
+ /* FALLING already enabled, enable RISING too */
+ pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ pc->irq_type[offset] = type;
+ } else if (pc->irq_type[offset] != type) {
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ }
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ case IRQ_TYPE_LEVEL_LOW:
+ if (pc->irq_type[offset] != type) {
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
+{
+ struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
+ unsigned gpio = irqd_to_hwirq(data);
+ unsigned offset = GPIO_REG_SHIFT(gpio);
+ unsigned bank = GPIO_REG_OFFSET(gpio);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&pc->irq_lock[bank], flags);
+
+ if (test_bit(offset, &pc->enabled_irq_map[bank]))
+ ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type);
+ else
+ ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type);
+
+ spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+
+ return ret;
+}
+
+static struct irq_chip bcm2835_gpio_irq_chip = {
+ .name = MODULE_NAME,
+ .irq_enable = bcm2835_gpio_irq_enable,
+ .irq_disable = bcm2835_gpio_irq_disable,
+ .irq_set_type = bcm2835_gpio_irq_set_type,
+};
+
+static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm2835_gpio_groups);
+}
+
+static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm2835_gpio_groups[selector];
+}
+
+static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = &bcm2835_gpio_pins[selector].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s,
+ unsigned offset)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
+ const char *fname = bcm2835_functions[fsel];
+ int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset);
+ int irq = irq_find_mapping(pc->irq_domain, offset);
+
+ seq_printf(s, "function %s in %s; irq %d (%s)",
+ fname, value ? "hi" : "lo",
+ irq, irq_type_names[pc->irq_type[offset]]);
+}
+
+static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *maps, unsigned num_maps)
+{
+ int i;
+
+ for (i = 0; i < num_maps; i++)
+ if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+ kfree(maps[i].data.configs.configs);
+
+ kfree(maps);
+}
+
+static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc,
+ struct device_node *np, u32 pin, u32 fnum,
+ struct pinctrl_map **maps)
+{
+ struct pinctrl_map *map = *maps;
+
+ if (fnum >= ARRAY_SIZE(bcm2835_functions)) {
+ dev_err(pc->dev, "%s: invalid brcm,function %d\n",
+ of_node_full_name(np), fnum);
+ return -EINVAL;
+ }
+
+ map->type = PIN_MAP_TYPE_MUX_GROUP;
+ map->data.mux.group = bcm2835_gpio_groups[pin];
+ map->data.mux.function = bcm2835_functions[fnum];
+ (*maps)++;
+
+ return 0;
+}
+
+static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc,
+ struct device_node *np, u32 pin, u32 pull,
+ struct pinctrl_map **maps)
+{
+ struct pinctrl_map *map = *maps;
+ unsigned long *configs;
+
+ if (pull > 2) {
+ dev_err(pc->dev, "%s: invalid brcm,pull %d\n",
+ of_node_full_name(np), pull);
+ return -EINVAL;
+ }
+
+ configs = kzalloc(sizeof(*configs), GFP_KERNEL);
+ if (!configs)
+ return -ENOMEM;
+ configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull);
+
+ map->type = PIN_MAP_TYPE_CONFIGS_PIN;
+ map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name;
+ map->data.configs.configs = configs;
+ map->data.configs.num_configs = 1;
+ (*maps)++;
+
+ return 0;
+}
+
+static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map, unsigned *num_maps)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct property *pins, *funcs, *pulls;
+ int num_pins, num_funcs, num_pulls, maps_per_pin;
+ struct pinctrl_map *maps, *cur_map;
+ int i, err;
+ u32 pin, func, pull;
+
+ pins = of_find_property(np, "brcm,pins", NULL);
+ if (!pins) {
+ dev_err(pc->dev, "%s: missing brcm,pins property\n",
+ of_node_full_name(np));
+ return -EINVAL;
+ }
+
+ funcs = of_find_property(np, "brcm,function", NULL);
+ pulls = of_find_property(np, "brcm,pull", NULL);
+
+ if (!funcs && !pulls) {
+ dev_err(pc->dev,
+ "%s: neither brcm,function nor brcm,pull specified\n",
+ of_node_full_name(np));
+ return -EINVAL;
+ }
+
+ num_pins = pins->length / 4;
+ num_funcs = funcs ? (funcs->length / 4) : 0;
+ num_pulls = pulls ? (pulls->length / 4) : 0;
+
+ if (num_funcs > 1 && num_funcs != num_pins) {
+ dev_err(pc->dev,
+ "%s: brcm,function must have 1 or %d entries\n",
+ of_node_full_name(np), num_pins);
+ return -EINVAL;
+ }
+
+ if (num_pulls > 1 && num_pulls != num_pins) {
+ dev_err(pc->dev,
+ "%s: brcm,pull must have 1 or %d entries\n",
+ of_node_full_name(np), num_pins);
+ return -EINVAL;
+ }
+
+ maps_per_pin = 0;
+ if (num_funcs)
+ maps_per_pin++;
+ if (num_pulls)
+ maps_per_pin++;
+ cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps),
+ GFP_KERNEL);
+ if (!maps)
+ return -ENOMEM;
+
+ for (i = 0; i < num_pins; i++) {
+ err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
+ if (err)
+ goto out;
+ if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
+ dev_err(pc->dev, "%s: invalid brcm,pins value %d\n",
+ of_node_full_name(np), pin);
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (num_funcs) {
+ err = of_property_read_u32_index(np, "brcm,function",
+ (num_funcs > 1) ? i : 0, &func);
+ if (err)
+ goto out;
+ err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin,
+ func, &cur_map);
+ if (err)
+ goto out;
+ }
+ if (num_pulls) {
+ err = of_property_read_u32_index(np, "brcm,pull",
+ (num_funcs > 1) ? i : 0, &pull);
+ if (err)
+ goto out;
+ err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin,
+ pull, &cur_map);
+ if (err)
+ goto out;
+ }
+ }
+
+ *map = maps;
+ *num_maps = num_pins * maps_per_pin;
+
+ return 0;
+
+out:
+ kfree(maps);
+ return err;
+}
+
+static const struct pinctrl_ops bcm2835_pctl_ops = {
+ .get_groups_count = bcm2835_pctl_get_groups_count,
+ .get_group_name = bcm2835_pctl_get_group_name,
+ .get_group_pins = bcm2835_pctl_get_group_pins,
+ .pin_dbg_show = bcm2835_pctl_pin_dbg_show,
+ .dt_node_to_map = bcm2835_pctl_dt_node_to_map,
+ .dt_free_map = bcm2835_pctl_dt_free_map,
+};
+
+static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ return BCM2835_FSEL_COUNT;
+}
+
+static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm2835_functions[selector];
+}
+
+static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ /* every pin can do every function */
+ *groups = bcm2835_gpio_groups;
+ *num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
+
+ return 0;
+}
+
+static int bcm2835_pmx_set(struct pinctrl_dev *pctldev,
+ unsigned func_selector,
+ unsigned group_selector)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector);
+
+ return 0;
+}
+
+static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable by setting to GPIO_IN */
+ bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
+}
+
+static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset,
+ bool input)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ enum bcm2835_fsel fsel = input ?
+ BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT;
+
+ bcm2835_pinctrl_fsel_set(pc, offset, fsel);
+
+ return 0;
+}
+
+static const struct pinmux_ops bcm2835_pmx_ops = {
+ .get_functions_count = bcm2835_pmx_get_functions_count,
+ .get_function_name = bcm2835_pmx_get_function_name,
+ .get_function_groups = bcm2835_pmx_get_function_groups,
+ .set_mux = bcm2835_pmx_set,
+ .gpio_disable_free = bcm2835_pmx_gpio_disable_free,
+ .gpio_set_direction = bcm2835_pmx_gpio_set_direction,
+};
+
+static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev,
+ unsigned pin, unsigned long *config)
+{
+ /* No way to read back config in HW */
+ return -ENOTSUPP;
+}
+
+static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
+ unsigned pin, unsigned long *configs,
+ unsigned num_configs)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ enum bcm2835_pinconf_param param;
+ u16 arg;
+ u32 off, bit;
+ int i;
+
+ for (i = 0; i < num_configs; i++) {
+ param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]);
+ arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]);
+
+ if (param != BCM2835_PINCONF_PARAM_PULL)
+ return -EINVAL;
+
+ off = GPIO_REG_OFFSET(pin);
+ bit = GPIO_REG_SHIFT(pin);
+
+ bcm2835_gpio_wr(pc, GPPUD, arg & 3);
+ /*
+ * Docs say to wait 150 cycles, but not of what. We assume a
+ * 1 MHz clock here, which is pretty slow...
+ */
+ udelay(150);
+ bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit));
+ udelay(150);
+ bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0);
+ } /* for each config */
+
+ return 0;
+}
+
+static const struct pinconf_ops bcm2835_pinconf_ops = {
+ .pin_config_get = bcm2835_pinconf_get,
+ .pin_config_set = bcm2835_pinconf_set,
+};
+
+static struct pinctrl_desc bcm2835_pinctrl_desc = {
+ .name = MODULE_NAME,
+ .pins = bcm2835_gpio_pins,
+ .npins = ARRAY_SIZE(bcm2835_gpio_pins),
+ .pctlops = &bcm2835_pctl_ops,
+ .pmxops = &bcm2835_pmx_ops,
+ .confops = &bcm2835_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
+ .name = MODULE_NAME,
+ .npins = BCM2835_NUM_GPIOS,
+};
+
+static int bcm2835_pinctrl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct bcm2835_pinctrl *pc;
+ struct resource iomem;
+ int err, i;
+ BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
+ BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
+
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pc);
+ pc->dev = dev;
+
+ err = of_address_to_resource(np, 0, &iomem);
+ if (err) {
+ dev_err(dev, "could not get IO memory\n");
+ return err;
+ }
+
+ pc->base = devm_ioremap_resource(dev, &iomem);
+ if (IS_ERR(pc->base))
+ return PTR_ERR(pc->base);
+
+ pc->gpio_chip = bcm2835_gpio_chip;
+ pc->gpio_chip.dev = dev;
+ pc->gpio_chip.of_node = np;
+
+ pc->irq_domain = irq_domain_add_linear(np, BCM2835_NUM_GPIOS,
+ &irq_domain_simple_ops, NULL);
+ if (!pc->irq_domain) {
+ dev_err(dev, "could not create IRQ domain\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < BCM2835_NUM_GPIOS; i++) {
+ int irq = irq_create_mapping(pc->irq_domain, i);
+ irq_set_lockdep_class(irq, &gpio_lock_class);
+ irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip,
+ handle_simple_irq);
+ irq_set_chip_data(irq, pc);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ for (i = 0; i < BCM2835_NUM_BANKS; i++) {
+ unsigned long events;
+ unsigned offset;
+ int len;
+ char *name;
+
+ /* clear event detection flags */
+ bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
+ bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0);
+ bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0);
+ bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0);
+ bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0);
+ bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0);
+
+ /* clear all the events */
+ events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4);
+ for_each_set_bit(offset, &events, 32)
+ bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
+
+ pc->irq[i] = irq_of_parse_and_map(np, i);
+ pc->irq_data[i].pc = pc;
+ pc->irq_data[i].bank = i;
+ spin_lock_init(&pc->irq_lock[i]);
+
+ len = strlen(dev_name(pc->dev)) + 16;
+ name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
+ if (!name)
+ return -ENOMEM;
+ snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
+
+ err = devm_request_irq(dev, pc->irq[i],
+ bcm2835_gpio_irq_handler, IRQF_SHARED,
+ name, &pc->irq_data[i]);
+ if (err) {
+ dev_err(dev, "unable to request IRQ %d\n", pc->irq[i]);
+ return err;
+ }
+ }
+
+ err = gpiochip_add(&pc->gpio_chip);
+ if (err) {
+ dev_err(dev, "could not add GPIO chip\n");
+ return err;
+ }
+
+ pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc);
+ if (!pc->pctl_dev) {
+ gpiochip_remove(&pc->gpio_chip);
+ return -EINVAL;
+ }
+
+ pc->gpio_range = bcm2835_pinctrl_gpio_range;
+ pc->gpio_range.base = pc->gpio_chip.base;
+ pc->gpio_range.gc = &pc->gpio_chip;
+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
+
+ return 0;
+}
+
+static int bcm2835_pinctrl_remove(struct platform_device *pdev)
+{
+ struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev);
+
+ pinctrl_unregister(pc->pctl_dev);
+ gpiochip_remove(&pc->gpio_chip);
+
+ return 0;
+}
+
+static struct of_device_id bcm2835_pinctrl_match[] = {
+ { .compatible = "brcm,bcm2835-gpio" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, bcm2835_pinctrl_match);
+
+static struct platform_driver bcm2835_pinctrl_driver = {
+ .probe = bcm2835_pinctrl_probe,
+ .remove = bcm2835_pinctrl_remove,
+ .driver = {
+ .name = MODULE_NAME,
+ .of_match_table = bcm2835_pinctrl_match,
+ },
+};
+module_platform_driver(bcm2835_pinctrl_driver);
+
+MODULE_AUTHOR("Chris Boot, Simon Arlott, Stephen Warren");
+MODULE_DESCRIPTION("BCM2835 Pin control driver");
+MODULE_LICENSE("GPL");
deleted file mode 100644
@@ -1,1455 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include "core.h"
-#include "pinctrl-utils.h"
-
-/* BCM281XX Pin Control Registers Definitions */
-
-/* Function Select bits are the same for all pin control registers */
-#define BCM281XX_PIN_REG_F_SEL_MASK 0x0700
-#define BCM281XX_PIN_REG_F_SEL_SHIFT 8
-
-/* Standard pin register */
-#define BCM281XX_STD_PIN_REG_DRV_STR_MASK 0x0007
-#define BCM281XX_STD_PIN_REG_DRV_STR_SHIFT 0
-#define BCM281XX_STD_PIN_REG_INPUT_DIS_MASK 0x0008
-#define BCM281XX_STD_PIN_REG_INPUT_DIS_SHIFT 3
-#define BCM281XX_STD_PIN_REG_SLEW_MASK 0x0010
-#define BCM281XX_STD_PIN_REG_SLEW_SHIFT 4
-#define BCM281XX_STD_PIN_REG_PULL_UP_MASK 0x0020
-#define BCM281XX_STD_PIN_REG_PULL_UP_SHIFT 5
-#define BCM281XX_STD_PIN_REG_PULL_DN_MASK 0x0040
-#define BCM281XX_STD_PIN_REG_PULL_DN_SHIFT 6
-#define BCM281XX_STD_PIN_REG_HYST_MASK 0x0080
-#define BCM281XX_STD_PIN_REG_HYST_SHIFT 7
-
-/* I2C pin register */
-#define BCM281XX_I2C_PIN_REG_INPUT_DIS_MASK 0x0004
-#define BCM281XX_I2C_PIN_REG_INPUT_DIS_SHIFT 2
-#define BCM281XX_I2C_PIN_REG_SLEW_MASK 0x0008
-#define BCM281XX_I2C_PIN_REG_SLEW_SHIFT 3
-#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_MASK 0x0070
-#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_SHIFT 4
-
-/* HDMI pin register */
-#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_MASK 0x0008
-#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_SHIFT 3
-#define BCM281XX_HDMI_PIN_REG_MODE_MASK 0x0010
-#define BCM281XX_HDMI_PIN_REG_MODE_SHIFT 4
-
-/**
- * bcm281xx_pin_type - types of pin register
- */
-enum bcm281xx_pin_type {
- BCM281XX_PIN_TYPE_UNKNOWN = 0,
- BCM281XX_PIN_TYPE_STD,
- BCM281XX_PIN_TYPE_I2C,
- BCM281XX_PIN_TYPE_HDMI,
-};
-
-static enum bcm281xx_pin_type std_pin = BCM281XX_PIN_TYPE_STD;
-static enum bcm281xx_pin_type i2c_pin = BCM281XX_PIN_TYPE_I2C;
-static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI;
-
-/**
- * bcm281xx_pin_function- define pin function
- */
-struct bcm281xx_pin_function {
- const char *name;
- const char * const *groups;
- const unsigned ngroups;
-};
-
-/**
- * bcm281xx_pinctrl_data - Broadcom-specific pinctrl data
- * @reg_base - base of pinctrl registers
- */
-struct bcm281xx_pinctrl_data {
- void __iomem *reg_base;
-
- /* List of all pins */
- const struct pinctrl_pin_desc *pins;
- const unsigned npins;
-
- const struct bcm281xx_pin_function *functions;
- const unsigned nfunctions;
-
- struct regmap *regmap;
-};
-
-/*
- * Pin number definition. The order here must be the same as defined in the
- * PADCTRLREG block in the RDB.
- */
-#define BCM281XX_PIN_ADCSYNC 0
-#define BCM281XX_PIN_BAT_RM 1
-#define BCM281XX_PIN_BSC1_SCL 2
-#define BCM281XX_PIN_BSC1_SDA 3
-#define BCM281XX_PIN_BSC2_SCL 4
-#define BCM281XX_PIN_BSC2_SDA 5
-#define BCM281XX_PIN_CLASSGPWR 6
-#define BCM281XX_PIN_CLK_CX8 7
-#define BCM281XX_PIN_CLKOUT_0 8
-#define BCM281XX_PIN_CLKOUT_1 9
-#define BCM281XX_PIN_CLKOUT_2 10
-#define BCM281XX_PIN_CLKOUT_3 11
-#define BCM281XX_PIN_CLKREQ_IN_0 12
-#define BCM281XX_PIN_CLKREQ_IN_1 13
-#define BCM281XX_PIN_CWS_SYS_REQ1 14
-#define BCM281XX_PIN_CWS_SYS_REQ2 15
-#define BCM281XX_PIN_CWS_SYS_REQ3 16
-#define BCM281XX_PIN_DIGMIC1_CLK 17
-#define BCM281XX_PIN_DIGMIC1_DQ 18
-#define BCM281XX_PIN_DIGMIC2_CLK 19
-#define BCM281XX_PIN_DIGMIC2_DQ 20
-#define BCM281XX_PIN_GPEN13 21
-#define BCM281XX_PIN_GPEN14 22
-#define BCM281XX_PIN_GPEN15 23
-#define BCM281XX_PIN_GPIO00 24
-#define BCM281XX_PIN_GPIO01 25
-#define BCM281XX_PIN_GPIO02 26
-#define BCM281XX_PIN_GPIO03 27
-#define BCM281XX_PIN_GPIO04 28
-#define BCM281XX_PIN_GPIO05 29
-#define BCM281XX_PIN_GPIO06 30
-#define BCM281XX_PIN_GPIO07 31
-#define BCM281XX_PIN_GPIO08 32
-#define BCM281XX_PIN_GPIO09 33
-#define BCM281XX_PIN_GPIO10 34
-#define BCM281XX_PIN_GPIO11 35
-#define BCM281XX_PIN_GPIO12 36
-#define BCM281XX_PIN_GPIO13 37
-#define BCM281XX_PIN_GPIO14 38
-#define BCM281XX_PIN_GPS_PABLANK 39
-#define BCM281XX_PIN_GPS_TMARK 40
-#define BCM281XX_PIN_HDMI_SCL 41
-#define BCM281XX_PIN_HDMI_SDA 42
-#define BCM281XX_PIN_IC_DM 43
-#define BCM281XX_PIN_IC_DP 44
-#define BCM281XX_PIN_KP_COL_IP_0 45
-#define BCM281XX_PIN_KP_COL_IP_1 46
-#define BCM281XX_PIN_KP_COL_IP_2 47
-#define BCM281XX_PIN_KP_COL_IP_3 48
-#define BCM281XX_PIN_KP_ROW_OP_0 49
-#define BCM281XX_PIN_KP_ROW_OP_1 50
-#define BCM281XX_PIN_KP_ROW_OP_2 51
-#define BCM281XX_PIN_KP_ROW_OP_3 52
-#define BCM281XX_PIN_LCD_B_0 53
-#define BCM281XX_PIN_LCD_B_1 54
-#define BCM281XX_PIN_LCD_B_2 55
-#define BCM281XX_PIN_LCD_B_3 56
-#define BCM281XX_PIN_LCD_B_4 57
-#define BCM281XX_PIN_LCD_B_5 58
-#define BCM281XX_PIN_LCD_B_6 59
-#define BCM281XX_PIN_LCD_B_7 60
-#define BCM281XX_PIN_LCD_G_0 61
-#define BCM281XX_PIN_LCD_G_1 62
-#define BCM281XX_PIN_LCD_G_2 63
-#define BCM281XX_PIN_LCD_G_3 64
-#define BCM281XX_PIN_LCD_G_4 65
-#define BCM281XX_PIN_LCD_G_5 66
-#define BCM281XX_PIN_LCD_G_6 67
-#define BCM281XX_PIN_LCD_G_7 68
-#define BCM281XX_PIN_LCD_HSYNC 69
-#define BCM281XX_PIN_LCD_OE 70
-#define BCM281XX_PIN_LCD_PCLK 71
-#define BCM281XX_PIN_LCD_R_0 72
-#define BCM281XX_PIN_LCD_R_1 73
-#define BCM281XX_PIN_LCD_R_2 74
-#define BCM281XX_PIN_LCD_R_3 75
-#define BCM281XX_PIN_LCD_R_4 76
-#define BCM281XX_PIN_LCD_R_5 77
-#define BCM281XX_PIN_LCD_R_6 78
-#define BCM281XX_PIN_LCD_R_7 79
-#define BCM281XX_PIN_LCD_VSYNC 80
-#define BCM281XX_PIN_MDMGPIO0 81
-#define BCM281XX_PIN_MDMGPIO1 82
-#define BCM281XX_PIN_MDMGPIO2 83
-#define BCM281XX_PIN_MDMGPIO3 84
-#define BCM281XX_PIN_MDMGPIO4 85
-#define BCM281XX_PIN_MDMGPIO5 86
-#define BCM281XX_PIN_MDMGPIO6 87
-#define BCM281XX_PIN_MDMGPIO7 88
-#define BCM281XX_PIN_MDMGPIO8 89
-#define BCM281XX_PIN_MPHI_DATA_0 90
-#define BCM281XX_PIN_MPHI_DATA_1 91
-#define BCM281XX_PIN_MPHI_DATA_2 92
-#define BCM281XX_PIN_MPHI_DATA_3 93
-#define BCM281XX_PIN_MPHI_DATA_4 94
-#define BCM281XX_PIN_MPHI_DATA_5 95
-#define BCM281XX_PIN_MPHI_DATA_6 96
-#define BCM281XX_PIN_MPHI_DATA_7 97
-#define BCM281XX_PIN_MPHI_DATA_8 98
-#define BCM281XX_PIN_MPHI_DATA_9 99
-#define BCM281XX_PIN_MPHI_DATA_10 100
-#define BCM281XX_PIN_MPHI_DATA_11 101
-#define BCM281XX_PIN_MPHI_DATA_12 102
-#define BCM281XX_PIN_MPHI_DATA_13 103
-#define BCM281XX_PIN_MPHI_DATA_14 104
-#define BCM281XX_PIN_MPHI_DATA_15 105
-#define BCM281XX_PIN_MPHI_HA0 106
-#define BCM281XX_PIN_MPHI_HAT0 107
-#define BCM281XX_PIN_MPHI_HAT1 108
-#define BCM281XX_PIN_MPHI_HCE0_N 109
-#define BCM281XX_PIN_MPHI_HCE1_N 110
-#define BCM281XX_PIN_MPHI_HRD_N 111
-#define BCM281XX_PIN_MPHI_HWR_N 112
-#define BCM281XX_PIN_MPHI_RUN0 113
-#define BCM281XX_PIN_MPHI_RUN1 114
-#define BCM281XX_PIN_MTX_SCAN_CLK 115
-#define BCM281XX_PIN_MTX_SCAN_DATA 116
-#define BCM281XX_PIN_NAND_AD_0 117
-#define BCM281XX_PIN_NAND_AD_1 118
-#define BCM281XX_PIN_NAND_AD_2 119
-#define BCM281XX_PIN_NAND_AD_3 120
-#define BCM281XX_PIN_NAND_AD_4 121
-#define BCM281XX_PIN_NAND_AD_5 122
-#define BCM281XX_PIN_NAND_AD_6 123
-#define BCM281XX_PIN_NAND_AD_7 124
-#define BCM281XX_PIN_NAND_ALE 125
-#define BCM281XX_PIN_NAND_CEN_0 126
-#define BCM281XX_PIN_NAND_CEN_1 127
-#define BCM281XX_PIN_NAND_CLE 128
-#define BCM281XX_PIN_NAND_OEN 129
-#define BCM281XX_PIN_NAND_RDY_0 130
-#define BCM281XX_PIN_NAND_RDY_1 131
-#define BCM281XX_PIN_NAND_WEN 132
-#define BCM281XX_PIN_NAND_WP 133
-#define BCM281XX_PIN_PC1 134
-#define BCM281XX_PIN_PC2 135
-#define BCM281XX_PIN_PMU_INT 136
-#define BCM281XX_PIN_PMU_SCL 137
-#define BCM281XX_PIN_PMU_SDA 138
-#define BCM281XX_PIN_RFST2G_MTSLOTEN3G 139
-#define BCM281XX_PIN_RGMII_0_RX_CTL 140
-#define BCM281XX_PIN_RGMII_0_RXC 141
-#define BCM281XX_PIN_RGMII_0_RXD_0 142
-#define BCM281XX_PIN_RGMII_0_RXD_1 143
-#define BCM281XX_PIN_RGMII_0_RXD_2 144
-#define BCM281XX_PIN_RGMII_0_RXD_3 145
-#define BCM281XX_PIN_RGMII_0_TX_CTL 146
-#define BCM281XX_PIN_RGMII_0_TXC 147
-#define BCM281XX_PIN_RGMII_0_TXD_0 148
-#define BCM281XX_PIN_RGMII_0_TXD_1 149
-#define BCM281XX_PIN_RGMII_0_TXD_2 150
-#define BCM281XX_PIN_RGMII_0_TXD_3 151
-#define BCM281XX_PIN_RGMII_1_RX_CTL 152
-#define BCM281XX_PIN_RGMII_1_RXC 153
-#define BCM281XX_PIN_RGMII_1_RXD_0 154
-#define BCM281XX_PIN_RGMII_1_RXD_1 155
-#define BCM281XX_PIN_RGMII_1_RXD_2 156
-#define BCM281XX_PIN_RGMII_1_RXD_3 157
-#define BCM281XX_PIN_RGMII_1_TX_CTL 158
-#define BCM281XX_PIN_RGMII_1_TXC 159
-#define BCM281XX_PIN_RGMII_1_TXD_0 160
-#define BCM281XX_PIN_RGMII_1_TXD_1 161
-#define BCM281XX_PIN_RGMII_1_TXD_2 162
-#define BCM281XX_PIN_RGMII_1_TXD_3 163
-#define BCM281XX_PIN_RGMII_GPIO_0 164
-#define BCM281XX_PIN_RGMII_GPIO_1 165
-#define BCM281XX_PIN_RGMII_GPIO_2 166
-#define BCM281XX_PIN_RGMII_GPIO_3 167
-#define BCM281XX_PIN_RTXDATA2G_TXDATA3G1 168
-#define BCM281XX_PIN_RTXEN2G_TXDATA3G2 169
-#define BCM281XX_PIN_RXDATA3G0 170
-#define BCM281XX_PIN_RXDATA3G1 171
-#define BCM281XX_PIN_RXDATA3G2 172
-#define BCM281XX_PIN_SDIO1_CLK 173
-#define BCM281XX_PIN_SDIO1_CMD 174
-#define BCM281XX_PIN_SDIO1_DATA_0 175
-#define BCM281XX_PIN_SDIO1_DATA_1 176
-#define BCM281XX_PIN_SDIO1_DATA_2 177
-#define BCM281XX_PIN_SDIO1_DATA_3 178
-#define BCM281XX_PIN_SDIO4_CLK 179
-#define BCM281XX_PIN_SDIO4_CMD 180
-#define BCM281XX_PIN_SDIO4_DATA_0 181
-#define BCM281XX_PIN_SDIO4_DATA_1 182
-#define BCM281XX_PIN_SDIO4_DATA_2 183
-#define BCM281XX_PIN_SDIO4_DATA_3 184
-#define BCM281XX_PIN_SIM_CLK 185
-#define BCM281XX_PIN_SIM_DATA 186
-#define BCM281XX_PIN_SIM_DET 187
-#define BCM281XX_PIN_SIM_RESETN 188
-#define BCM281XX_PIN_SIM2_CLK 189
-#define BCM281XX_PIN_SIM2_DATA 190
-#define BCM281XX_PIN_SIM2_DET 191
-#define BCM281XX_PIN_SIM2_RESETN 192
-#define BCM281XX_PIN_SRI_C 193
-#define BCM281XX_PIN_SRI_D 194
-#define BCM281XX_PIN_SRI_E 195
-#define BCM281XX_PIN_SSP_EXTCLK 196
-#define BCM281XX_PIN_SSP0_CLK 197
-#define BCM281XX_PIN_SSP0_FS 198
-#define BCM281XX_PIN_SSP0_RXD 199
-#define BCM281XX_PIN_SSP0_TXD 200
-#define BCM281XX_PIN_SSP2_CLK 201
-#define BCM281XX_PIN_SSP2_FS_0 202
-#define BCM281XX_PIN_SSP2_FS_1 203
-#define BCM281XX_PIN_SSP2_FS_2 204
-#define BCM281XX_PIN_SSP2_FS_3 205
-#define BCM281XX_PIN_SSP2_RXD_0 206
-#define BCM281XX_PIN_SSP2_RXD_1 207
-#define BCM281XX_PIN_SSP2_TXD_0 208
-#define BCM281XX_PIN_SSP2_TXD_1 209
-#define BCM281XX_PIN_SSP3_CLK 210
-#define BCM281XX_PIN_SSP3_FS 211
-#define BCM281XX_PIN_SSP3_RXD 212
-#define BCM281XX_PIN_SSP3_TXD 213
-#define BCM281XX_PIN_SSP4_CLK 214
-#define BCM281XX_PIN_SSP4_FS 215
-#define BCM281XX_PIN_SSP4_RXD 216
-#define BCM281XX_PIN_SSP4_TXD 217
-#define BCM281XX_PIN_SSP5_CLK 218
-#define BCM281XX_PIN_SSP5_FS 219
-#define BCM281XX_PIN_SSP5_RXD 220
-#define BCM281XX_PIN_SSP5_TXD 221
-#define BCM281XX_PIN_SSP6_CLK 222
-#define BCM281XX_PIN_SSP6_FS 223
-#define BCM281XX_PIN_SSP6_RXD 224
-#define BCM281XX_PIN_SSP6_TXD 225
-#define BCM281XX_PIN_STAT_1 226
-#define BCM281XX_PIN_STAT_2 227
-#define BCM281XX_PIN_SYSCLKEN 228
-#define BCM281XX_PIN_TRACECLK 229
-#define BCM281XX_PIN_TRACEDT00 230
-#define BCM281XX_PIN_TRACEDT01 231
-#define BCM281XX_PIN_TRACEDT02 232
-#define BCM281XX_PIN_TRACEDT03 233
-#define BCM281XX_PIN_TRACEDT04 234
-#define BCM281XX_PIN_TRACEDT05 235
-#define BCM281XX_PIN_TRACEDT06 236
-#define BCM281XX_PIN_TRACEDT07 237
-#define BCM281XX_PIN_TRACEDT08 238
-#define BCM281XX_PIN_TRACEDT09 239
-#define BCM281XX_PIN_TRACEDT10 240
-#define BCM281XX_PIN_TRACEDT11 241
-#define BCM281XX_PIN_TRACEDT12 242
-#define BCM281XX_PIN_TRACEDT13 243
-#define BCM281XX_PIN_TRACEDT14 244
-#define BCM281XX_PIN_TRACEDT15 245
-#define BCM281XX_PIN_TXDATA3G0 246
-#define BCM281XX_PIN_TXPWRIND 247
-#define BCM281XX_PIN_UARTB1_UCTS 248
-#define BCM281XX_PIN_UARTB1_URTS 249
-#define BCM281XX_PIN_UARTB1_URXD 250
-#define BCM281XX_PIN_UARTB1_UTXD 251
-#define BCM281XX_PIN_UARTB2_URXD 252
-#define BCM281XX_PIN_UARTB2_UTXD 253
-#define BCM281XX_PIN_UARTB3_UCTS 254
-#define BCM281XX_PIN_UARTB3_URTS 255
-#define BCM281XX_PIN_UARTB3_URXD 256
-#define BCM281XX_PIN_UARTB3_UTXD 257
-#define BCM281XX_PIN_UARTB4_UCTS 258
-#define BCM281XX_PIN_UARTB4_URTS 259
-#define BCM281XX_PIN_UARTB4_URXD 260
-#define BCM281XX_PIN_UARTB4_UTXD 261
-#define BCM281XX_PIN_VC_CAM1_SCL 262
-#define BCM281XX_PIN_VC_CAM1_SDA 263
-#define BCM281XX_PIN_VC_CAM2_SCL 264
-#define BCM281XX_PIN_VC_CAM2_SDA 265
-#define BCM281XX_PIN_VC_CAM3_SCL 266
-#define BCM281XX_PIN_VC_CAM3_SDA 267
-
-#define BCM281XX_PIN_DESC(a, b, c) \
- { .number = a, .name = b, .drv_data = &c##_pin }
-
-/*
- * Pin description definition. The order here must be the same as defined in
- * the PADCTRLREG block in the RDB, since the pin number is used as an index
- * into this array.
- */
-static const struct pinctrl_pin_desc bcm281xx_pinctrl_pins[] = {
- BCM281XX_PIN_DESC(BCM281XX_PIN_ADCSYNC, "adcsync", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_BAT_RM, "bat_rm", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SCL, "bsc1_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SDA, "bsc1_sda", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SCL, "bsc2_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SDA, "bsc2_sda", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLASSGPWR, "classgpwr", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLK_CX8, "clk_cx8", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_0, "clkout_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_1, "clkout_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_2, "clkout_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_3, "clkout_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_0, "clkreq_in_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_1, "clkreq_in_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ1, "cws_sys_req1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ2, "cws_sys_req2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ3, "cws_sys_req3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_CLK, "digmic1_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_DQ, "digmic1_dq", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_CLK, "digmic2_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_DQ, "digmic2_dq", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN13, "gpen13", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN14, "gpen14", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN15, "gpen15", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO00, "gpio00", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO01, "gpio01", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO02, "gpio02", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO03, "gpio03", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO04, "gpio04", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO05, "gpio05", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO06, "gpio06", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO07, "gpio07", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO08, "gpio08", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO09, "gpio09", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO10, "gpio10", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO11, "gpio11", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO12, "gpio12", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO13, "gpio13", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO14, "gpio14", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_PABLANK, "gps_pablank", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_TMARK, "gps_tmark", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SCL, "hdmi_scl", hdmi),
- BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SDA, "hdmi_sda", hdmi),
- BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DM, "ic_dm", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DP, "ic_dp", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_0, "kp_col_ip_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_1, "kp_col_ip_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_2, "kp_col_ip_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_3, "kp_col_ip_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_0, "kp_row_op_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_1, "kp_row_op_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_2, "kp_row_op_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_3, "kp_row_op_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_0, "lcd_b_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_1, "lcd_b_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_2, "lcd_b_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_3, "lcd_b_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_4, "lcd_b_4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_5, "lcd_b_5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_6, "lcd_b_6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_7, "lcd_b_7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_0, "lcd_g_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_1, "lcd_g_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_2, "lcd_g_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_3, "lcd_g_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_4, "lcd_g_4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_5, "lcd_g_5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_6, "lcd_g_6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_7, "lcd_g_7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_HSYNC, "lcd_hsync", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_OE, "lcd_oe", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_PCLK, "lcd_pclk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_0, "lcd_r_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_1, "lcd_r_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_2, "lcd_r_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_3, "lcd_r_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_4, "lcd_r_4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_5, "lcd_r_5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_6, "lcd_r_6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_7, "lcd_r_7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_VSYNC, "lcd_vsync", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO0, "mdmgpio0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO1, "mdmgpio1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO2, "mdmgpio2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO3, "mdmgpio3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO4, "mdmgpio4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO5, "mdmgpio5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO6, "mdmgpio6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO7, "mdmgpio7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO8, "mdmgpio8", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_0, "mphi_data_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_1, "mphi_data_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_2, "mphi_data_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_3, "mphi_data_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_4, "mphi_data_4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_5, "mphi_data_5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_6, "mphi_data_6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_7, "mphi_data_7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_8, "mphi_data_8", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_9, "mphi_data_9", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_10, "mphi_data_10", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_11, "mphi_data_11", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_12, "mphi_data_12", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_13, "mphi_data_13", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_14, "mphi_data_14", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_15, "mphi_data_15", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HA0, "mphi_ha0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT0, "mphi_hat0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT1, "mphi_hat1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE0_N, "mphi_hce0_n", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE1_N, "mphi_hce1_n", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HRD_N, "mphi_hrd_n", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HWR_N, "mphi_hwr_n", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN0, "mphi_run0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN1, "mphi_run1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_DATA, "mtx_scan_data", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_0, "nand_ad_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_1, "nand_ad_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_2, "nand_ad_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_3, "nand_ad_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_4, "nand_ad_4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_5, "nand_ad_5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_6, "nand_ad_6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_7, "nand_ad_7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_ALE, "nand_ale", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_0, "nand_cen_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_1, "nand_cen_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CLE, "nand_cle", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_OEN, "nand_oen", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_0, "nand_rdy_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_1, "nand_rdy_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WEN, "nand_wen", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WP, "nand_wp", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_PC1, "pc1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_PC2, "pc2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_INT, "pmu_int", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SCL, "pmu_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SDA, "pmu_sda", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g",
- std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXC, "rgmii_0_rxc", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXC, "rgmii_0_txc", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXC, "rgmii_1_rxc", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXC, "rgmii_1_txc", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RTXDATA2G_TXDATA3G1,
- "rtxdata2g_txdata3g1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2",
- std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G0, "rxdata3g0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G1, "rxdata3g1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G2, "rxdata3g2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CLK, "sdio1_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CMD, "sdio1_cmd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_0, "sdio1_data_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_1, "sdio1_data_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_2, "sdio1_data_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_3, "sdio1_data_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CLK, "sdio4_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CMD, "sdio4_cmd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_0, "sdio4_data_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_1, "sdio4_data_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_2, "sdio4_data_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_3, "sdio4_data_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_CLK, "sim_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DATA, "sim_data", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DET, "sim_det", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_RESETN, "sim_resetn", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_CLK, "sim2_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DATA, "sim2_data", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DET, "sim2_det", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_RESETN, "sim2_resetn", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_C, "sri_c", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_D, "sri_d", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_E, "sri_e", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP_EXTCLK, "ssp_extclk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_CLK, "ssp0_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_FS, "ssp0_fs", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_RXD, "ssp0_rxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_TXD, "ssp0_txd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_CLK, "ssp2_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_0, "ssp2_fs_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_1, "ssp2_fs_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_2, "ssp2_fs_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_3, "ssp2_fs_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_0, "ssp2_rxd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_1, "ssp2_rxd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_0, "ssp2_txd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_1, "ssp2_txd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_CLK, "ssp3_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_FS, "ssp3_fs", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_RXD, "ssp3_rxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_TXD, "ssp3_txd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_CLK, "ssp4_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_FS, "ssp4_fs", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_RXD, "ssp4_rxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_TXD, "ssp4_txd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_CLK, "ssp5_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_FS, "ssp5_fs", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_RXD, "ssp5_rxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_TXD, "ssp5_txd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_CLK, "ssp6_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_FS, "ssp6_fs", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_RXD, "ssp6_rxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_TXD, "ssp6_txd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_1, "stat_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_2, "stat_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SYSCLKEN, "sysclken", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACECLK, "traceclk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT00, "tracedt00", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT01, "tracedt01", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT02, "tracedt02", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT03, "tracedt03", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT04, "tracedt04", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT05, "tracedt05", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT06, "tracedt06", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT07, "tracedt07", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT08, "tracedt08", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT09, "tracedt09", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT10, "tracedt10", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT11, "tracedt11", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT12, "tracedt12", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT13, "tracedt13", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT14, "tracedt14", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT15, "tracedt15", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TXDATA3G0, "txdata3g0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TXPWRIND, "txpwrind", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UCTS, "uartb1_ucts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URTS, "uartb1_urts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URXD, "uartb1_urxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UTXD, "uartb1_utxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_URXD, "uartb2_urxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_UTXD, "uartb2_utxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UCTS, "uartb3_ucts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URTS, "uartb3_urts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URXD, "uartb3_urxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UTXD, "uartb3_utxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UCTS, "uartb4_ucts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URTS, "uartb4_urts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URXD, "uartb4_urxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UTXD, "uartb4_utxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c),
-};
-
-static const char * const bcm281xx_alt_groups[] = {
- "adcsync",
- "bat_rm",
- "bsc1_scl",
- "bsc1_sda",
- "bsc2_scl",
- "bsc2_sda",
- "classgpwr",
- "clk_cx8",
- "clkout_0",
- "clkout_1",
- "clkout_2",
- "clkout_3",
- "clkreq_in_0",
- "clkreq_in_1",
- "cws_sys_req1",
- "cws_sys_req2",
- "cws_sys_req3",
- "digmic1_clk",
- "digmic1_dq",
- "digmic2_clk",
- "digmic2_dq",
- "gpen13",
- "gpen14",
- "gpen15",
- "gpio00",
- "gpio01",
- "gpio02",
- "gpio03",
- "gpio04",
- "gpio05",
- "gpio06",
- "gpio07",
- "gpio08",
- "gpio09",
- "gpio10",
- "gpio11",
- "gpio12",
- "gpio13",
- "gpio14",
- "gps_pablank",
- "gps_tmark",
- "hdmi_scl",
- "hdmi_sda",
- "ic_dm",
- "ic_dp",
- "kp_col_ip_0",
- "kp_col_ip_1",
- "kp_col_ip_2",
- "kp_col_ip_3",
- "kp_row_op_0",
- "kp_row_op_1",
- "kp_row_op_2",
- "kp_row_op_3",
- "lcd_b_0",
- "lcd_b_1",
- "lcd_b_2",
- "lcd_b_3",
- "lcd_b_4",
- "lcd_b_5",
- "lcd_b_6",
- "lcd_b_7",
- "lcd_g_0",
- "lcd_g_1",
- "lcd_g_2",
- "lcd_g_3",
- "lcd_g_4",
- "lcd_g_5",
- "lcd_g_6",
- "lcd_g_7",
- "lcd_hsync",
- "lcd_oe",
- "lcd_pclk",
- "lcd_r_0",
- "lcd_r_1",
- "lcd_r_2",
- "lcd_r_3",
- "lcd_r_4",
- "lcd_r_5",
- "lcd_r_6",
- "lcd_r_7",
- "lcd_vsync",
- "mdmgpio0",
- "mdmgpio1",
- "mdmgpio2",
- "mdmgpio3",
- "mdmgpio4",
- "mdmgpio5",
- "mdmgpio6",
- "mdmgpio7",
- "mdmgpio8",
- "mphi_data_0",
- "mphi_data_1",
- "mphi_data_2",
- "mphi_data_3",
- "mphi_data_4",
- "mphi_data_5",
- "mphi_data_6",
- "mphi_data_7",
- "mphi_data_8",
- "mphi_data_9",
- "mphi_data_10",
- "mphi_data_11",
- "mphi_data_12",
- "mphi_data_13",
- "mphi_data_14",
- "mphi_data_15",
- "mphi_ha0",
- "mphi_hat0",
- "mphi_hat1",
- "mphi_hce0_n",
- "mphi_hce1_n",
- "mphi_hrd_n",
- "mphi_hwr_n",
- "mphi_run0",
- "mphi_run1",
- "mtx_scan_clk",
- "mtx_scan_data",
- "nand_ad_0",
- "nand_ad_1",
- "nand_ad_2",
- "nand_ad_3",
- "nand_ad_4",
- "nand_ad_5",
- "nand_ad_6",
- "nand_ad_7",
- "nand_ale",
- "nand_cen_0",
- "nand_cen_1",
- "nand_cle",
- "nand_oen",
- "nand_rdy_0",
- "nand_rdy_1",
- "nand_wen",
- "nand_wp",
- "pc1",
- "pc2",
- "pmu_int",
- "pmu_scl",
- "pmu_sda",
- "rfst2g_mtsloten3g",
- "rgmii_0_rx_ctl",
- "rgmii_0_rxc",
- "rgmii_0_rxd_0",
- "rgmii_0_rxd_1",
- "rgmii_0_rxd_2",
- "rgmii_0_rxd_3",
- "rgmii_0_tx_ctl",
- "rgmii_0_txc",
- "rgmii_0_txd_0",
- "rgmii_0_txd_1",
- "rgmii_0_txd_2",
- "rgmii_0_txd_3",
- "rgmii_1_rx_ctl",
- "rgmii_1_rxc",
- "rgmii_1_rxd_0",
- "rgmii_1_rxd_1",
- "rgmii_1_rxd_2",
- "rgmii_1_rxd_3",
- "rgmii_1_tx_ctl",
- "rgmii_1_txc",
- "rgmii_1_txd_0",
- "rgmii_1_txd_1",
- "rgmii_1_txd_2",
- "rgmii_1_txd_3",
- "rgmii_gpio_0",
- "rgmii_gpio_1",
- "rgmii_gpio_2",
- "rgmii_gpio_3",
- "rtxdata2g_txdata3g1",
- "rtxen2g_txdata3g2",
- "rxdata3g0",
- "rxdata3g1",
- "rxdata3g2",
- "sdio1_clk",
- "sdio1_cmd",
- "sdio1_data_0",
- "sdio1_data_1",
- "sdio1_data_2",
- "sdio1_data_3",
- "sdio4_clk",
- "sdio4_cmd",
- "sdio4_data_0",
- "sdio4_data_1",
- "sdio4_data_2",
- "sdio4_data_3",
- "sim_clk",
- "sim_data",
- "sim_det",
- "sim_resetn",
- "sim2_clk",
- "sim2_data",
- "sim2_det",
- "sim2_resetn",
- "sri_c",
- "sri_d",
- "sri_e",
- "ssp_extclk",
- "ssp0_clk",
- "ssp0_fs",
- "ssp0_rxd",
- "ssp0_txd",
- "ssp2_clk",
- "ssp2_fs_0",
- "ssp2_fs_1",
- "ssp2_fs_2",
- "ssp2_fs_3",
- "ssp2_rxd_0",
- "ssp2_rxd_1",
- "ssp2_txd_0",
- "ssp2_txd_1",
- "ssp3_clk",
- "ssp3_fs",
- "ssp3_rxd",
- "ssp3_txd",
- "ssp4_clk",
- "ssp4_fs",
- "ssp4_rxd",
- "ssp4_txd",
- "ssp5_clk",
- "ssp5_fs",
- "ssp5_rxd",
- "ssp5_txd",
- "ssp6_clk",
- "ssp6_fs",
- "ssp6_rxd",
- "ssp6_txd",
- "stat_1",
- "stat_2",
- "sysclken",
- "traceclk",
- "tracedt00",
- "tracedt01",
- "tracedt02",
- "tracedt03",
- "tracedt04",
- "tracedt05",
- "tracedt06",
- "tracedt07",
- "tracedt08",
- "tracedt09",
- "tracedt10",
- "tracedt11",
- "tracedt12",
- "tracedt13",
- "tracedt14",
- "tracedt15",
- "txdata3g0",
- "txpwrind",
- "uartb1_ucts",
- "uartb1_urts",
- "uartb1_urxd",
- "uartb1_utxd",
- "uartb2_urxd",
- "uartb2_utxd",
- "uartb3_ucts",
- "uartb3_urts",
- "uartb3_urxd",
- "uartb3_utxd",
- "uartb4_ucts",
- "uartb4_urts",
- "uartb4_urxd",
- "uartb4_utxd",
- "vc_cam1_scl",
- "vc_cam1_sda",
- "vc_cam2_scl",
- "vc_cam2_sda",
- "vc_cam3_scl",
- "vc_cam3_sda",
-};
-
-/* Every pin can implement all ALT1-ALT4 functions */
-#define BCM281XX_PIN_FUNCTION(fcn_name) \
-{ \
- .name = #fcn_name, \
- .groups = bcm281xx_alt_groups, \
- .ngroups = ARRAY_SIZE(bcm281xx_alt_groups), \
-}
-
-static const struct bcm281xx_pin_function bcm281xx_functions[] = {
- BCM281XX_PIN_FUNCTION(alt1),
- BCM281XX_PIN_FUNCTION(alt2),
- BCM281XX_PIN_FUNCTION(alt3),
- BCM281XX_PIN_FUNCTION(alt4),
-};
-
-static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = {
- .pins = bcm281xx_pinctrl_pins,
- .npins = ARRAY_SIZE(bcm281xx_pinctrl_pins),
- .functions = bcm281xx_functions,
- .nfunctions = ARRAY_SIZE(bcm281xx_functions),
-};
-
-static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev,
- unsigned pin)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- if (pin >= pdata->npins)
- return BCM281XX_PIN_TYPE_UNKNOWN;
-
- return *(enum bcm281xx_pin_type *)(pdata->pins[pin].drv_data);
-}
-
-#define BCM281XX_PIN_SHIFT(type, param) \
- (BCM281XX_ ## type ## _PIN_REG_ ## param ## _SHIFT)
-
-#define BCM281XX_PIN_MASK(type, param) \
- (BCM281XX_ ## type ## _PIN_REG_ ## param ## _MASK)
-
-/*
- * This helper function is used to build up the value and mask used to write to
- * a pin register, but does not actually write to the register.
- */
-static inline void bcm281xx_pin_update(u32 *reg_val, u32 *reg_mask,
- u32 param_val, u32 param_shift,
- u32 param_mask)
-{
- *reg_val &= ~param_mask;
- *reg_val |= (param_val << param_shift) & param_mask;
- *reg_mask |= param_mask;
-}
-
-static struct regmap_config bcm281xx_pinctrl_regmap_config = {
- .reg_bits = 32,
- .reg_stride = 4,
- .val_bits = 32,
- .max_register = BCM281XX_PIN_VC_CAM3_SDA,
-};
-
-static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- return pdata->npins;
-}
-
-static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
- unsigned group)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- return pdata->pins[group].name;
-}
-
-static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
- unsigned group,
- const unsigned **pins,
- unsigned *num_pins)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- *pins = &pdata->pins[group].number;
- *num_pins = 1;
-
- return 0;
-}
-
-static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
- struct seq_file *s,
- unsigned offset)
-{
- seq_printf(s, " %s", dev_name(pctldev->dev));
-}
-
-static struct pinctrl_ops bcm281xx_pinctrl_ops = {
- .get_groups_count = bcm281xx_pinctrl_get_groups_count,
- .get_group_name = bcm281xx_pinctrl_get_group_name,
- .get_group_pins = bcm281xx_pinctrl_get_group_pins,
- .pin_dbg_show = bcm281xx_pinctrl_pin_dbg_show,
- .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
- .dt_free_map = pinctrl_utils_dt_free_map,
-};
-
-static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- return pdata->nfunctions;
-}
-
-static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
- unsigned function)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- return pdata->functions[function].name;
-}
-
-static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
- unsigned function,
- const char * const **groups,
- unsigned * const num_groups)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- *groups = pdata->functions[function].groups;
- *num_groups = pdata->functions[function].ngroups;
-
- return 0;
-}
-
-static int bcm281xx_pinmux_set(struct pinctrl_dev *pctldev,
- unsigned function,
- unsigned group)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
- const struct bcm281xx_pin_function *f = &pdata->functions[function];
- u32 offset = 4 * pdata->pins[group].number;
- int rc = 0;
-
- dev_dbg(pctldev->dev,
- "%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n",
- __func__, f->name, function, pdata->pins[group].name,
- pdata->pins[group].number, offset);
-
- rc = regmap_update_bits(pdata->regmap, offset,
- BCM281XX_PIN_REG_F_SEL_MASK,
- function << BCM281XX_PIN_REG_F_SEL_SHIFT);
- if (rc)
- dev_err(pctldev->dev,
- "Error updating register for pin %s (%d).\n",
- pdata->pins[group].name, pdata->pins[group].number);
-
- return rc;
-}
-
-static struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = {
- .get_functions_count = bcm281xx_pinctrl_get_fcns_count,
- .get_function_name = bcm281xx_pinctrl_get_fcn_name,
- .get_function_groups = bcm281xx_pinctrl_get_fcn_groups,
- .set_mux = bcm281xx_pinmux_set,
-};
-
-static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *config)
-{
- return -ENOTSUPP;
-}
-
-
-/* Goes through the configs and update register val/mask */
-static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *configs,
- unsigned num_configs,
- u32 *val,
- u32 *mask)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
- int i;
- enum pin_config_param param;
- u16 arg;
-
- for (i = 0; i < num_configs; i++) {
- param = pinconf_to_config_param(configs[i]);
- arg = pinconf_to_config_argument(configs[i]);
-
- switch (param) {
- case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
- arg = (arg >= 1 ? 1 : 0);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(STD, HYST),
- BCM281XX_PIN_MASK(STD, HYST));
- break;
- /*
- * The pin bias can only be one of pull-up, pull-down, or
- * disable. The user does not need to specify a value for the
- * property, and the default value from pinconf-generic is
- * ignored.
- */
- case PIN_CONFIG_BIAS_DISABLE:
- bcm281xx_pin_update(val, mask, 0,
- BCM281XX_PIN_SHIFT(STD, PULL_UP),
- BCM281XX_PIN_MASK(STD, PULL_UP));
- bcm281xx_pin_update(val, mask, 0,
- BCM281XX_PIN_SHIFT(STD, PULL_DN),
- BCM281XX_PIN_MASK(STD, PULL_DN));
- break;
-
- case PIN_CONFIG_BIAS_PULL_UP:
- bcm281xx_pin_update(val, mask, 1,
- BCM281XX_PIN_SHIFT(STD, PULL_UP),
- BCM281XX_PIN_MASK(STD, PULL_UP));
- bcm281xx_pin_update(val, mask, 0,
- BCM281XX_PIN_SHIFT(STD, PULL_DN),
- BCM281XX_PIN_MASK(STD, PULL_DN));
- break;
-
- case PIN_CONFIG_BIAS_PULL_DOWN:
- bcm281xx_pin_update(val, mask, 0,
- BCM281XX_PIN_SHIFT(STD, PULL_UP),
- BCM281XX_PIN_MASK(STD, PULL_UP));
- bcm281xx_pin_update(val, mask, 1,
- BCM281XX_PIN_SHIFT(STD, PULL_DN),
- BCM281XX_PIN_MASK(STD, PULL_DN));
- break;
-
- case PIN_CONFIG_SLEW_RATE:
- arg = (arg >= 1 ? 1 : 0);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(STD, SLEW),
- BCM281XX_PIN_MASK(STD, SLEW));
- break;
-
- case PIN_CONFIG_INPUT_ENABLE:
- /* inversed since register is for input _disable_ */
- arg = (arg >= 1 ? 0 : 1);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(STD, INPUT_DIS),
- BCM281XX_PIN_MASK(STD, INPUT_DIS));
- break;
-
- case PIN_CONFIG_DRIVE_STRENGTH:
- /* Valid range is 2-16 mA, even numbers only */
- if ((arg < 2) || (arg > 16) || (arg % 2)) {
- dev_err(pctldev->dev,
- "Invalid Drive Strength value (%d) for "
- "pin %s (%d). Valid values are "
- "(2..16) mA, even numbers only.\n",
- arg, pdata->pins[pin].name, pin);
- return -EINVAL;
- }
- bcm281xx_pin_update(val, mask, (arg/2)-1,
- BCM281XX_PIN_SHIFT(STD, DRV_STR),
- BCM281XX_PIN_MASK(STD, DRV_STR));
- break;
-
- default:
- dev_err(pctldev->dev,
- "Unrecognized pin config %d for pin %s (%d).\n",
- param, pdata->pins[pin].name, pin);
- return -EINVAL;
-
- } /* switch config */
- } /* for each config */
-
- return 0;
-}
-
-/*
- * The pull-up strength for an I2C pin is represented by bits 4-6 in the
- * register with the following mapping:
- * 0b000: No pull-up
- * 0b001: 1200 Ohm
- * 0b010: 1800 Ohm
- * 0b011: 720 Ohm
- * 0b100: 2700 Ohm
- * 0b101: 831 Ohm
- * 0b110: 1080 Ohm
- * 0b111: 568 Ohm
- * This array maps pull-up strength in Ohms to register values (1+index).
- */
-static const u16 bcm281xx_pullup_map[] = {
- 1200, 1800, 720, 2700, 831, 1080, 568
-};
-
-/* Goes through the configs and update register val/mask */
-static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *configs,
- unsigned num_configs,
- u32 *val,
- u32 *mask)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
- int i, j;
- enum pin_config_param param;
- u16 arg;
-
- for (i = 0; i < num_configs; i++) {
- param = pinconf_to_config_param(configs[i]);
- arg = pinconf_to_config_argument(configs[i]);
-
- switch (param) {
- case PIN_CONFIG_BIAS_PULL_UP:
- for (j = 0; j < ARRAY_SIZE(bcm281xx_pullup_map); j++)
- if (bcm281xx_pullup_map[j] == arg)
- break;
-
- if (j == ARRAY_SIZE(bcm281xx_pullup_map)) {
- dev_err(pctldev->dev,
- "Invalid pull-up value (%d) for pin %s "
- "(%d). Valid values are 568, 720, 831, "
- "1080, 1200, 1800, 2700 Ohms.\n",
- arg, pdata->pins[pin].name, pin);
- return -EINVAL;
- }
-
- bcm281xx_pin_update(val, mask, j+1,
- BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
- BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
- break;
-
- case PIN_CONFIG_BIAS_DISABLE:
- bcm281xx_pin_update(val, mask, 0,
- BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
- BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
- break;
-
- case PIN_CONFIG_SLEW_RATE:
- arg = (arg >= 1 ? 1 : 0);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(I2C, SLEW),
- BCM281XX_PIN_MASK(I2C, SLEW));
- break;
-
- case PIN_CONFIG_INPUT_ENABLE:
- /* inversed since register is for input _disable_ */
- arg = (arg >= 1 ? 0 : 1);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(I2C, INPUT_DIS),
- BCM281XX_PIN_MASK(I2C, INPUT_DIS));
- break;
-
- default:
- dev_err(pctldev->dev,
- "Unrecognized pin config %d for pin %s (%d).\n",
- param, pdata->pins[pin].name, pin);
- return -EINVAL;
-
- } /* switch config */
- } /* for each config */
-
- return 0;
-}
-
-/* Goes through the configs and update register val/mask */
-static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *configs,
- unsigned num_configs,
- u32 *val,
- u32 *mask)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
- int i;
- enum pin_config_param param;
- u16 arg;
-
- for (i = 0; i < num_configs; i++) {
- param = pinconf_to_config_param(configs[i]);
- arg = pinconf_to_config_argument(configs[i]);
-
- switch (param) {
- case PIN_CONFIG_SLEW_RATE:
- arg = (arg >= 1 ? 1 : 0);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(HDMI, MODE),
- BCM281XX_PIN_MASK(HDMI, MODE));
- break;
-
- case PIN_CONFIG_INPUT_ENABLE:
- /* inversed since register is for input _disable_ */
- arg = (arg >= 1 ? 0 : 1);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(HDMI, INPUT_DIS),
- BCM281XX_PIN_MASK(HDMI, INPUT_DIS));
- break;
-
- default:
- dev_err(pctldev->dev,
- "Unrecognized pin config %d for pin %s (%d).\n",
- param, pdata->pins[pin].name, pin);
- return -EINVAL;
-
- } /* switch config */
- } /* for each config */
-
- return 0;
-}
-
-static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *configs,
- unsigned num_configs)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
- enum bcm281xx_pin_type pin_type;
- u32 offset = 4 * pin;
- u32 cfg_val, cfg_mask;
- int rc;
-
- cfg_val = 0;
- cfg_mask = 0;
- pin_type = pin_type_get(pctldev, pin);
-
- /* Different pins have different configuration options */
- switch (pin_type) {
- case BCM281XX_PIN_TYPE_STD:
- rc = bcm281xx_std_pin_update(pctldev, pin, configs,
- num_configs, &cfg_val, &cfg_mask);
- break;
-
- case BCM281XX_PIN_TYPE_I2C:
- rc = bcm281xx_i2c_pin_update(pctldev, pin, configs,
- num_configs, &cfg_val, &cfg_mask);
- break;
-
- case BCM281XX_PIN_TYPE_HDMI:
- rc = bcm281xx_hdmi_pin_update(pctldev, pin, configs,
- num_configs, &cfg_val, &cfg_mask);
- break;
-
- default:
- dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n",
- pdata->pins[pin].name, pin);
- return -EINVAL;
-
- } /* switch pin type */
-
- if (rc)
- return rc;
-
- dev_dbg(pctldev->dev,
- "%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n",
- __func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask);
-
- rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val);
- if (rc) {
- dev_err(pctldev->dev,
- "Error updating register for pin %s (%d).\n",
- pdata->pins[pin].name, pin);
- return rc;
- }
-
- return 0;
-}
-
-static struct pinconf_ops bcm281xx_pinctrl_pinconf_ops = {
- .pin_config_get = bcm281xx_pinctrl_pin_config_get,
- .pin_config_set = bcm281xx_pinctrl_pin_config_set,
-};
-
-static struct pinctrl_desc bcm281xx_pinctrl_desc = {
- /* name, pins, npins members initialized in probe function */
- .pctlops = &bcm281xx_pinctrl_ops,
- .pmxops = &bcm281xx_pinctrl_pinmux_ops,
- .confops = &bcm281xx_pinctrl_pinconf_ops,
- .owner = THIS_MODULE,
-};
-
-static int __init bcm281xx_pinctrl_probe(struct platform_device *pdev)
-{
- struct bcm281xx_pinctrl_data *pdata = &bcm281xx_pinctrl;
- struct resource *res;
- struct pinctrl_dev *pctl;
-
- /* So far We can assume there is only 1 bank of registers */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(pdata->reg_base)) {
- dev_err(&pdev->dev, "Failed to ioremap MEM resource\n");
- return -ENODEV;
- }
-
- /* Initialize the dynamic part of pinctrl_desc */
- pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base,
- &bcm281xx_pinctrl_regmap_config);
- if (IS_ERR(pdata->regmap)) {
- dev_err(&pdev->dev, "Regmap MMIO init failed.\n");
- return -ENODEV;
- }
-
- bcm281xx_pinctrl_desc.name = dev_name(&pdev->dev);
- bcm281xx_pinctrl_desc.pins = bcm281xx_pinctrl.pins;
- bcm281xx_pinctrl_desc.npins = bcm281xx_pinctrl.npins;
-
- pctl = pinctrl_register(&bcm281xx_pinctrl_desc,
- &pdev->dev,
- pdata);
- if (!pctl) {
- dev_err(&pdev->dev, "Failed to register pinctrl\n");
- return -ENODEV;
- }
-
- platform_set_drvdata(pdev, pdata);
-
- return 0;
-}
-
-static struct of_device_id bcm281xx_pinctrl_of_match[] = {
- { .compatible = "brcm,bcm11351-pinctrl", },
- { },
-};
-
-static struct platform_driver bcm281xx_pinctrl_driver = {
- .driver = {
- .name = "bcm281xx-pinctrl",
- .of_match_table = bcm281xx_pinctrl_of_match,
- },
-};
-
-module_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe);
-
-MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
-MODULE_AUTHOR("Sherman Yin <syin@broadcom.com>");
-MODULE_DESCRIPTION("Broadcom BCM281xx pinctrl driver");
-MODULE_LICENSE("GPL v2");
deleted file mode 100644
@@ -1,1072 +0,0 @@
-/*
- * Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO)
- *
- * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
- *
- * This driver is inspired by:
- * pinctrl-nomadik.c, please see original file for copyright information
- * pinctrl-tegra.c, please see original file for copyright information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/bitmap.h>
-#include <linux/bug.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdesc.h>
-#include <linux/irqdomain.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#define MODULE_NAME "pinctrl-bcm2835"
-#define BCM2835_NUM_GPIOS 54
-#define BCM2835_NUM_BANKS 2
-
-#define BCM2835_PIN_BITMAP_SZ \
- DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
-
-/* GPIO register offsets */
-#define GPFSEL0 0x0 /* Function Select */
-#define GPSET0 0x1c /* Pin Output Set */
-#define GPCLR0 0x28 /* Pin Output Clear */
-#define GPLEV0 0x34 /* Pin Level */
-#define GPEDS0 0x40 /* Pin Event Detect Status */
-#define GPREN0 0x4c /* Pin Rising Edge Detect Enable */
-#define GPFEN0 0x58 /* Pin Falling Edge Detect Enable */
-#define GPHEN0 0x64 /* Pin High Detect Enable */
-#define GPLEN0 0x70 /* Pin Low Detect Enable */
-#define GPAREN0 0x7c /* Pin Async Rising Edge Detect */
-#define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */
-#define GPPUD 0x94 /* Pin Pull-up/down Enable */
-#define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */
-
-#define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4))
-#define FSEL_SHIFT(p) (((p) % 10) * 3)
-#define GPIO_REG_OFFSET(p) ((p) / 32)
-#define GPIO_REG_SHIFT(p) ((p) % 32)
-
-enum bcm2835_pinconf_param {
- /* argument: bcm2835_pinconf_pull */
- BCM2835_PINCONF_PARAM_PULL,
-};
-
-enum bcm2835_pinconf_pull {
- BCM2835_PINCONFIG_PULL_NONE,
- BCM2835_PINCONFIG_PULL_DOWN,
- BCM2835_PINCONFIG_PULL_UP,
-};
-
-#define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
-#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
-#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
-
-struct bcm2835_gpio_irqdata {
- struct bcm2835_pinctrl *pc;
- int bank;
-};
-
-struct bcm2835_pinctrl {
- struct device *dev;
- void __iomem *base;
- int irq[BCM2835_NUM_BANKS];
-
- /* note: locking assumes each bank will have its own unsigned long */
- unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
- unsigned int irq_type[BCM2835_NUM_GPIOS];
-
- struct pinctrl_dev *pctl_dev;
- struct irq_domain *irq_domain;
- struct gpio_chip gpio_chip;
- struct pinctrl_gpio_range gpio_range;
-
- struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS];
- spinlock_t irq_lock[BCM2835_NUM_BANKS];
-};
-
-static struct lock_class_key gpio_lock_class;
-
-/* pins are just named GPIO0..GPIO53 */
-#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
-static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
- BCM2835_GPIO_PIN(0),
- BCM2835_GPIO_PIN(1),
- BCM2835_GPIO_PIN(2),
- BCM2835_GPIO_PIN(3),
- BCM2835_GPIO_PIN(4),
- BCM2835_GPIO_PIN(5),
- BCM2835_GPIO_PIN(6),
- BCM2835_GPIO_PIN(7),
- BCM2835_GPIO_PIN(8),
- BCM2835_GPIO_PIN(9),
- BCM2835_GPIO_PIN(10),
- BCM2835_GPIO_PIN(11),
- BCM2835_GPIO_PIN(12),
- BCM2835_GPIO_PIN(13),
- BCM2835_GPIO_PIN(14),
- BCM2835_GPIO_PIN(15),
- BCM2835_GPIO_PIN(16),
- BCM2835_GPIO_PIN(17),
- BCM2835_GPIO_PIN(18),
- BCM2835_GPIO_PIN(19),
- BCM2835_GPIO_PIN(20),
- BCM2835_GPIO_PIN(21),
- BCM2835_GPIO_PIN(22),
- BCM2835_GPIO_PIN(23),
- BCM2835_GPIO_PIN(24),
- BCM2835_GPIO_PIN(25),
- BCM2835_GPIO_PIN(26),
- BCM2835_GPIO_PIN(27),
- BCM2835_GPIO_PIN(28),
- BCM2835_GPIO_PIN(29),
- BCM2835_GPIO_PIN(30),
- BCM2835_GPIO_PIN(31),
- BCM2835_GPIO_PIN(32),
- BCM2835_GPIO_PIN(33),
- BCM2835_GPIO_PIN(34),
- BCM2835_GPIO_PIN(35),
- BCM2835_GPIO_PIN(36),
- BCM2835_GPIO_PIN(37),
- BCM2835_GPIO_PIN(38),
- BCM2835_GPIO_PIN(39),
- BCM2835_GPIO_PIN(40),
- BCM2835_GPIO_PIN(41),
- BCM2835_GPIO_PIN(42),
- BCM2835_GPIO_PIN(43),
- BCM2835_GPIO_PIN(44),
- BCM2835_GPIO_PIN(45),
- BCM2835_GPIO_PIN(46),
- BCM2835_GPIO_PIN(47),
- BCM2835_GPIO_PIN(48),
- BCM2835_GPIO_PIN(49),
- BCM2835_GPIO_PIN(50),
- BCM2835_GPIO_PIN(51),
- BCM2835_GPIO_PIN(52),
- BCM2835_GPIO_PIN(53),
-};
-
-/* one pin per group */
-static const char * const bcm2835_gpio_groups[] = {
- "gpio0",
- "gpio1",
- "gpio2",
- "gpio3",
- "gpio4",
- "gpio5",
- "gpio6",
- "gpio7",
- "gpio8",
- "gpio9",
- "gpio10",
- "gpio11",
- "gpio12",
- "gpio13",
- "gpio14",
- "gpio15",
- "gpio16",
- "gpio17",
- "gpio18",
- "gpio19",
- "gpio20",
- "gpio21",
- "gpio22",
- "gpio23",
- "gpio24",
- "gpio25",
- "gpio26",
- "gpio27",
- "gpio28",
- "gpio29",
- "gpio30",
- "gpio31",
- "gpio32",
- "gpio33",
- "gpio34",
- "gpio35",
- "gpio36",
- "gpio37",
- "gpio38",
- "gpio39",
- "gpio40",
- "gpio41",
- "gpio42",
- "gpio43",
- "gpio44",
- "gpio45",
- "gpio46",
- "gpio47",
- "gpio48",
- "gpio49",
- "gpio50",
- "gpio51",
- "gpio52",
- "gpio53",
-};
-
-enum bcm2835_fsel {
- BCM2835_FSEL_GPIO_IN = 0,
- BCM2835_FSEL_GPIO_OUT = 1,
- BCM2835_FSEL_ALT0 = 4,
- BCM2835_FSEL_ALT1 = 5,
- BCM2835_FSEL_ALT2 = 6,
- BCM2835_FSEL_ALT3 = 7,
- BCM2835_FSEL_ALT4 = 3,
- BCM2835_FSEL_ALT5 = 2,
- BCM2835_FSEL_COUNT = 8,
- BCM2835_FSEL_MASK = 0x7,
-};
-
-static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = {
- [BCM2835_FSEL_GPIO_IN] = "gpio_in",
- [BCM2835_FSEL_GPIO_OUT] = "gpio_out",
- [BCM2835_FSEL_ALT0] = "alt0",
- [BCM2835_FSEL_ALT1] = "alt1",
- [BCM2835_FSEL_ALT2] = "alt2",
- [BCM2835_FSEL_ALT3] = "alt3",
- [BCM2835_FSEL_ALT4] = "alt4",
- [BCM2835_FSEL_ALT5] = "alt5",
-};
-
-static const char * const irq_type_names[] = {
- [IRQ_TYPE_NONE] = "none",
- [IRQ_TYPE_EDGE_RISING] = "edge-rising",
- [IRQ_TYPE_EDGE_FALLING] = "edge-falling",
- [IRQ_TYPE_EDGE_BOTH] = "edge-both",
- [IRQ_TYPE_LEVEL_HIGH] = "level-high",
- [IRQ_TYPE_LEVEL_LOW] = "level-low",
-};
-
-static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg)
-{
- return readl(pc->base + reg);
-}
-
-static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg,
- u32 val)
-{
- writel(val, pc->base + reg);
-}
-
-static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg,
- unsigned bit)
-{
- reg += GPIO_REG_OFFSET(bit) * 4;
- return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1;
-}
-
-/* note NOT a read/modify/write cycle */
-static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc,
- unsigned reg, unsigned bit)
-{
- reg += GPIO_REG_OFFSET(bit) * 4;
- bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit)));
-}
-
-static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get(
- struct bcm2835_pinctrl *pc, unsigned pin)
-{
- u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
- enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
-
- dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin,
- bcm2835_functions[status]);
-
- return status;
-}
-
-static inline void bcm2835_pinctrl_fsel_set(
- struct bcm2835_pinctrl *pc, unsigned pin,
- enum bcm2835_fsel fsel)
-{
- u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
- enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
-
- dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin,
- bcm2835_functions[cur]);
-
- if (cur == fsel)
- return;
-
- if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) {
- /* always transition through GPIO_IN */
- val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
- val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin);
-
- dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin,
- bcm2835_functions[BCM2835_FSEL_GPIO_IN]);
- bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
- }
-
- val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
- val |= fsel << FSEL_SHIFT(pin);
-
- dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin,
- bcm2835_functions[fsel]);
- bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
-}
-
-static int bcm2835_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- return pinctrl_request_gpio(chip->base + offset);
-}
-
-static void bcm2835_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- pinctrl_free_gpio(chip->base + offset);
-}
-
-static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- return pinctrl_gpio_direction_input(chip->base + offset);
-}
-
-static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
-
- return bcm2835_gpio_get_bit(pc, GPLEV0, offset);
-}
-
-static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- return pinctrl_gpio_direction_output(chip->base + offset);
-}
-
-static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
-
- bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset);
-}
-
-static int bcm2835_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
-
- return irq_linear_revmap(pc->irq_domain, offset);
-}
-
-static struct gpio_chip bcm2835_gpio_chip = {
- .label = MODULE_NAME,
- .owner = THIS_MODULE,
- .request = bcm2835_gpio_request,
- .free = bcm2835_gpio_free,
- .direction_input = bcm2835_gpio_direction_input,
- .direction_output = bcm2835_gpio_direction_output,
- .get = bcm2835_gpio_get,
- .set = bcm2835_gpio_set,
- .to_irq = bcm2835_gpio_to_irq,
- .base = -1,
- .ngpio = BCM2835_NUM_GPIOS,
- .can_sleep = false,
-};
-
-static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
-{
- struct bcm2835_gpio_irqdata *irqdata = dev_id;
- struct bcm2835_pinctrl *pc = irqdata->pc;
- int bank = irqdata->bank;
- unsigned long events;
- unsigned offset;
- unsigned gpio;
- unsigned int type;
-
- events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
- events &= pc->enabled_irq_map[bank];
- for_each_set_bit(offset, &events, 32) {
- gpio = (32 * bank) + offset;
- type = pc->irq_type[gpio];
-
- /* ack edge triggered IRQs immediately */
- if (!(type & IRQ_TYPE_LEVEL_MASK))
- bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
-
- generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio));
-
- /* ack level triggered IRQ after handling them */
- if (type & IRQ_TYPE_LEVEL_MASK)
- bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
- }
- return events ? IRQ_HANDLED : IRQ_NONE;
-}
-
-static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
- unsigned reg, unsigned offset, bool enable)
-{
- u32 value;
- reg += GPIO_REG_OFFSET(offset) * 4;
- value = bcm2835_gpio_rd(pc, reg);
- if (enable)
- value |= BIT(GPIO_REG_SHIFT(offset));
- else
- value &= ~(BIT(GPIO_REG_SHIFT(offset)));
- bcm2835_gpio_wr(pc, reg, value);
-}
-
-/* fast path for IRQ handler */
-static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
- unsigned offset, bool enable)
-{
- switch (pc->irq_type[offset]) {
- case IRQ_TYPE_EDGE_RISING:
- __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
- __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- __bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable);
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- __bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable);
- break;
- }
-}
-
-static void bcm2835_gpio_irq_enable(struct irq_data *data)
-{
- struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
- unsigned gpio = irqd_to_hwirq(data);
- unsigned offset = GPIO_REG_SHIFT(gpio);
- unsigned bank = GPIO_REG_OFFSET(gpio);
- unsigned long flags;
-
- spin_lock_irqsave(&pc->irq_lock[bank], flags);
- set_bit(offset, &pc->enabled_irq_map[bank]);
- bcm2835_gpio_irq_config(pc, gpio, true);
- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
-}
-
-static void bcm2835_gpio_irq_disable(struct irq_data *data)
-{
- struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
- unsigned gpio = irqd_to_hwirq(data);
- unsigned offset = GPIO_REG_SHIFT(gpio);
- unsigned bank = GPIO_REG_OFFSET(gpio);
- unsigned long flags;
-
- spin_lock_irqsave(&pc->irq_lock[bank], flags);
- bcm2835_gpio_irq_config(pc, gpio, false);
- clear_bit(offset, &pc->enabled_irq_map[bank]);
- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
-}
-
-static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc,
- unsigned offset, unsigned int type)
-{
- switch (type) {
- case IRQ_TYPE_NONE:
- case IRQ_TYPE_EDGE_RISING:
- case IRQ_TYPE_EDGE_FALLING:
- case IRQ_TYPE_EDGE_BOTH:
- case IRQ_TYPE_LEVEL_HIGH:
- case IRQ_TYPE_LEVEL_LOW:
- pc->irq_type[offset] = type;
- break;
-
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-/* slower path for reconfiguring IRQ type */
-static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc,
- unsigned offset, unsigned int type)
-{
- switch (type) {
- case IRQ_TYPE_NONE:
- if (pc->irq_type[offset] != type) {
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- }
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
- /* RISING already enabled, disable FALLING */
- pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- } else if (pc->irq_type[offset] != type) {
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- bcm2835_gpio_irq_config(pc, offset, true);
- }
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
- /* FALLING already enabled, disable RISING */
- pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- } else if (pc->irq_type[offset] != type) {
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- bcm2835_gpio_irq_config(pc, offset, true);
- }
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) {
- /* RISING already enabled, enable FALLING too */
- pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
- bcm2835_gpio_irq_config(pc, offset, true);
- pc->irq_type[offset] = type;
- } else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) {
- /* FALLING already enabled, enable RISING too */
- pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
- bcm2835_gpio_irq_config(pc, offset, true);
- pc->irq_type[offset] = type;
- } else if (pc->irq_type[offset] != type) {
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- bcm2835_gpio_irq_config(pc, offset, true);
- }
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- case IRQ_TYPE_LEVEL_LOW:
- if (pc->irq_type[offset] != type) {
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- bcm2835_gpio_irq_config(pc, offset, true);
- }
- break;
-
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
-{
- struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
- unsigned gpio = irqd_to_hwirq(data);
- unsigned offset = GPIO_REG_SHIFT(gpio);
- unsigned bank = GPIO_REG_OFFSET(gpio);
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&pc->irq_lock[bank], flags);
-
- if (test_bit(offset, &pc->enabled_irq_map[bank]))
- ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type);
- else
- ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type);
-
- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
-
- return ret;
-}
-
-static struct irq_chip bcm2835_gpio_irq_chip = {
- .name = MODULE_NAME,
- .irq_enable = bcm2835_gpio_irq_enable,
- .irq_disable = bcm2835_gpio_irq_disable,
- .irq_set_type = bcm2835_gpio_irq_set_type,
-};
-
-static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
-{
- return ARRAY_SIZE(bcm2835_gpio_groups);
-}
-
-static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
- unsigned selector)
-{
- return bcm2835_gpio_groups[selector];
-}
-
-static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev,
- unsigned selector,
- const unsigned **pins,
- unsigned *num_pins)
-{
- *pins = &bcm2835_gpio_pins[selector].number;
- *num_pins = 1;
-
- return 0;
-}
-
-static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
- struct seq_file *s,
- unsigned offset)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
- enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
- const char *fname = bcm2835_functions[fsel];
- int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset);
- int irq = irq_find_mapping(pc->irq_domain, offset);
-
- seq_printf(s, "function %s in %s; irq %d (%s)",
- fname, value ? "hi" : "lo",
- irq, irq_type_names[pc->irq_type[offset]]);
-}
-
-static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev,
- struct pinctrl_map *maps, unsigned num_maps)
-{
- int i;
-
- for (i = 0; i < num_maps; i++)
- if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
- kfree(maps[i].data.configs.configs);
-
- kfree(maps);
-}
-
-static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc,
- struct device_node *np, u32 pin, u32 fnum,
- struct pinctrl_map **maps)
-{
- struct pinctrl_map *map = *maps;
-
- if (fnum >= ARRAY_SIZE(bcm2835_functions)) {
- dev_err(pc->dev, "%s: invalid brcm,function %d\n",
- of_node_full_name(np), fnum);
- return -EINVAL;
- }
-
- map->type = PIN_MAP_TYPE_MUX_GROUP;
- map->data.mux.group = bcm2835_gpio_groups[pin];
- map->data.mux.function = bcm2835_functions[fnum];
- (*maps)++;
-
- return 0;
-}
-
-static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc,
- struct device_node *np, u32 pin, u32 pull,
- struct pinctrl_map **maps)
-{
- struct pinctrl_map *map = *maps;
- unsigned long *configs;
-
- if (pull > 2) {
- dev_err(pc->dev, "%s: invalid brcm,pull %d\n",
- of_node_full_name(np), pull);
- return -EINVAL;
- }
-
- configs = kzalloc(sizeof(*configs), GFP_KERNEL);
- if (!configs)
- return -ENOMEM;
- configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull);
-
- map->type = PIN_MAP_TYPE_CONFIGS_PIN;
- map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name;
- map->data.configs.configs = configs;
- map->data.configs.num_configs = 1;
- (*maps)++;
-
- return 0;
-}
-
-static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
- struct device_node *np,
- struct pinctrl_map **map, unsigned *num_maps)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
- struct property *pins, *funcs, *pulls;
- int num_pins, num_funcs, num_pulls, maps_per_pin;
- struct pinctrl_map *maps, *cur_map;
- int i, err;
- u32 pin, func, pull;
-
- pins = of_find_property(np, "brcm,pins", NULL);
- if (!pins) {
- dev_err(pc->dev, "%s: missing brcm,pins property\n",
- of_node_full_name(np));
- return -EINVAL;
- }
-
- funcs = of_find_property(np, "brcm,function", NULL);
- pulls = of_find_property(np, "brcm,pull", NULL);
-
- if (!funcs && !pulls) {
- dev_err(pc->dev,
- "%s: neither brcm,function nor brcm,pull specified\n",
- of_node_full_name(np));
- return -EINVAL;
- }
-
- num_pins = pins->length / 4;
- num_funcs = funcs ? (funcs->length / 4) : 0;
- num_pulls = pulls ? (pulls->length / 4) : 0;
-
- if (num_funcs > 1 && num_funcs != num_pins) {
- dev_err(pc->dev,
- "%s: brcm,function must have 1 or %d entries\n",
- of_node_full_name(np), num_pins);
- return -EINVAL;
- }
-
- if (num_pulls > 1 && num_pulls != num_pins) {
- dev_err(pc->dev,
- "%s: brcm,pull must have 1 or %d entries\n",
- of_node_full_name(np), num_pins);
- return -EINVAL;
- }
-
- maps_per_pin = 0;
- if (num_funcs)
- maps_per_pin++;
- if (num_pulls)
- maps_per_pin++;
- cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps),
- GFP_KERNEL);
- if (!maps)
- return -ENOMEM;
-
- for (i = 0; i < num_pins; i++) {
- err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
- if (err)
- goto out;
- if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
- dev_err(pc->dev, "%s: invalid brcm,pins value %d\n",
- of_node_full_name(np), pin);
- err = -EINVAL;
- goto out;
- }
-
- if (num_funcs) {
- err = of_property_read_u32_index(np, "brcm,function",
- (num_funcs > 1) ? i : 0, &func);
- if (err)
- goto out;
- err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin,
- func, &cur_map);
- if (err)
- goto out;
- }
- if (num_pulls) {
- err = of_property_read_u32_index(np, "brcm,pull",
- (num_funcs > 1) ? i : 0, &pull);
- if (err)
- goto out;
- err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin,
- pull, &cur_map);
- if (err)
- goto out;
- }
- }
-
- *map = maps;
- *num_maps = num_pins * maps_per_pin;
-
- return 0;
-
-out:
- kfree(maps);
- return err;
-}
-
-static const struct pinctrl_ops bcm2835_pctl_ops = {
- .get_groups_count = bcm2835_pctl_get_groups_count,
- .get_group_name = bcm2835_pctl_get_group_name,
- .get_group_pins = bcm2835_pctl_get_group_pins,
- .pin_dbg_show = bcm2835_pctl_pin_dbg_show,
- .dt_node_to_map = bcm2835_pctl_dt_node_to_map,
- .dt_free_map = bcm2835_pctl_dt_free_map,
-};
-
-static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev)
-{
- return BCM2835_FSEL_COUNT;
-}
-
-static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev,
- unsigned selector)
-{
- return bcm2835_functions[selector];
-}
-
-static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev,
- unsigned selector,
- const char * const **groups,
- unsigned * const num_groups)
-{
- /* every pin can do every function */
- *groups = bcm2835_gpio_groups;
- *num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
-
- return 0;
-}
-
-static int bcm2835_pmx_set(struct pinctrl_dev *pctldev,
- unsigned func_selector,
- unsigned group_selector)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
-
- bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector);
-
- return 0;
-}
-
-static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
- struct pinctrl_gpio_range *range,
- unsigned offset)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
-
- /* disable by setting to GPIO_IN */
- bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
-}
-
-static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
- struct pinctrl_gpio_range *range,
- unsigned offset,
- bool input)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
- enum bcm2835_fsel fsel = input ?
- BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT;
-
- bcm2835_pinctrl_fsel_set(pc, offset, fsel);
-
- return 0;
-}
-
-static const struct pinmux_ops bcm2835_pmx_ops = {
- .get_functions_count = bcm2835_pmx_get_functions_count,
- .get_function_name = bcm2835_pmx_get_function_name,
- .get_function_groups = bcm2835_pmx_get_function_groups,
- .set_mux = bcm2835_pmx_set,
- .gpio_disable_free = bcm2835_pmx_gpio_disable_free,
- .gpio_set_direction = bcm2835_pmx_gpio_set_direction,
-};
-
-static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev,
- unsigned pin, unsigned long *config)
-{
- /* No way to read back config in HW */
- return -ENOTSUPP;
-}
-
-static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
- unsigned pin, unsigned long *configs,
- unsigned num_configs)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
- enum bcm2835_pinconf_param param;
- u16 arg;
- u32 off, bit;
- int i;
-
- for (i = 0; i < num_configs; i++) {
- param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]);
- arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]);
-
- if (param != BCM2835_PINCONF_PARAM_PULL)
- return -EINVAL;
-
- off = GPIO_REG_OFFSET(pin);
- bit = GPIO_REG_SHIFT(pin);
-
- bcm2835_gpio_wr(pc, GPPUD, arg & 3);
- /*
- * Docs say to wait 150 cycles, but not of what. We assume a
- * 1 MHz clock here, which is pretty slow...
- */
- udelay(150);
- bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit));
- udelay(150);
- bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0);
- } /* for each config */
-
- return 0;
-}
-
-static const struct pinconf_ops bcm2835_pinconf_ops = {
- .pin_config_get = bcm2835_pinconf_get,
- .pin_config_set = bcm2835_pinconf_set,
-};
-
-static struct pinctrl_desc bcm2835_pinctrl_desc = {
- .name = MODULE_NAME,
- .pins = bcm2835_gpio_pins,
- .npins = ARRAY_SIZE(bcm2835_gpio_pins),
- .pctlops = &bcm2835_pctl_ops,
- .pmxops = &bcm2835_pmx_ops,
- .confops = &bcm2835_pinconf_ops,
- .owner = THIS_MODULE,
-};
-
-static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
- .name = MODULE_NAME,
- .npins = BCM2835_NUM_GPIOS,
-};
-
-static int bcm2835_pinctrl_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
- struct bcm2835_pinctrl *pc;
- struct resource iomem;
- int err, i;
- BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
- BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
-
- pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
- if (!pc)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, pc);
- pc->dev = dev;
-
- err = of_address_to_resource(np, 0, &iomem);
- if (err) {
- dev_err(dev, "could not get IO memory\n");
- return err;
- }
-
- pc->base = devm_ioremap_resource(dev, &iomem);
- if (IS_ERR(pc->base))
- return PTR_ERR(pc->base);
-
- pc->gpio_chip = bcm2835_gpio_chip;
- pc->gpio_chip.dev = dev;
- pc->gpio_chip.of_node = np;
-
- pc->irq_domain = irq_domain_add_linear(np, BCM2835_NUM_GPIOS,
- &irq_domain_simple_ops, NULL);
- if (!pc->irq_domain) {
- dev_err(dev, "could not create IRQ domain\n");
- return -ENOMEM;
- }
-
- for (i = 0; i < BCM2835_NUM_GPIOS; i++) {
- int irq = irq_create_mapping(pc->irq_domain, i);
- irq_set_lockdep_class(irq, &gpio_lock_class);
- irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip,
- handle_simple_irq);
- irq_set_chip_data(irq, pc);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (i = 0; i < BCM2835_NUM_BANKS; i++) {
- unsigned long events;
- unsigned offset;
- int len;
- char *name;
-
- /* clear event detection flags */
- bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
- bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0);
- bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0);
- bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0);
- bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0);
- bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0);
-
- /* clear all the events */
- events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4);
- for_each_set_bit(offset, &events, 32)
- bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
-
- pc->irq[i] = irq_of_parse_and_map(np, i);
- pc->irq_data[i].pc = pc;
- pc->irq_data[i].bank = i;
- spin_lock_init(&pc->irq_lock[i]);
-
- len = strlen(dev_name(pc->dev)) + 16;
- name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
- if (!name)
- return -ENOMEM;
- snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
-
- err = devm_request_irq(dev, pc->irq[i],
- bcm2835_gpio_irq_handler, IRQF_SHARED,
- name, &pc->irq_data[i]);
- if (err) {
- dev_err(dev, "unable to request IRQ %d\n", pc->irq[i]);
- return err;
- }
- }
-
- err = gpiochip_add(&pc->gpio_chip);
- if (err) {
- dev_err(dev, "could not add GPIO chip\n");
- return err;
- }
-
- pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc);
- if (!pc->pctl_dev) {
- gpiochip_remove(&pc->gpio_chip);
- return -EINVAL;
- }
-
- pc->gpio_range = bcm2835_pinctrl_gpio_range;
- pc->gpio_range.base = pc->gpio_chip.base;
- pc->gpio_range.gc = &pc->gpio_chip;
- pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
-
- return 0;
-}
-
-static int bcm2835_pinctrl_remove(struct platform_device *pdev)
-{
- struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev);
-
- pinctrl_unregister(pc->pctl_dev);
- gpiochip_remove(&pc->gpio_chip);
-
- return 0;
-}
-
-static struct of_device_id bcm2835_pinctrl_match[] = {
- { .compatible = "brcm,bcm2835-gpio" },
- {}
-};
-MODULE_DEVICE_TABLE(of, bcm2835_pinctrl_match);
-
-static struct platform_driver bcm2835_pinctrl_driver = {
- .probe = bcm2835_pinctrl_probe,
- .remove = bcm2835_pinctrl_remove,
- .driver = {
- .name = MODULE_NAME,
- .of_match_table = bcm2835_pinctrl_match,
- },
-};
-module_platform_driver(bcm2835_pinctrl_driver);
-
-MODULE_AUTHOR("Chris Boot, Simon Arlott, Stephen Warren");
-MODULE_DESCRIPTION("BCM2835 Pin control driver");
-MODULE_LICENSE("GPL");
Consolidate Broadcom pinctrl drivers into drivers/pinctrl/bcm/* Signed-off-by: Ray Jui <rjui@broadcom.com> --- drivers/pinctrl/Kconfig | 19 +- drivers/pinctrl/Makefile | 4 +- drivers/pinctrl/bcm/Kconfig | 21 + drivers/pinctrl/bcm/Makefile | 4 + drivers/pinctrl/bcm/pinctrl-bcm281xx.c | 1455 ++++++++++++++++++++++++++++++++ drivers/pinctrl/bcm/pinctrl-bcm2835.c | 1072 +++++++++++++++++++++++ drivers/pinctrl/pinctrl-bcm281xx.c | 1455 -------------------------------- drivers/pinctrl/pinctrl-bcm2835.c | 1072 ----------------------- 8 files changed, 2555 insertions(+), 2547 deletions(-) create mode 100644 drivers/pinctrl/bcm/Kconfig create mode 100644 drivers/pinctrl/bcm/Makefile create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm281xx.c create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm2835.c delete mode 100644 drivers/pinctrl/pinctrl-bcm281xx.c delete mode 100644 drivers/pinctrl/pinctrl-bcm2835.c