Message ID | 20241009060521.2971168-3-ryan_chen@aspeedtech.com |
---|---|
State | New |
Headers | show |
Series | Add support for AST2700 clk driver | expand |
On Mi, 2024-10-09 at 14:05 +0800, Ryan Chen wrote: > The AST2700 reset driver is registered as an auxiliary device > due to reset and clock controller share the same register region. > > Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> > --- > drivers/reset/Kconfig | 7 + > drivers/reset/Makefile | 1 + > drivers/reset/reset-aspeed.c | 256 +++++++++++++++++++++++++++++++++++ > 3 files changed, 264 insertions(+) > create mode 100644 drivers/reset/reset-aspeed.c > > diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig > index 67bce340a87e..71a3accea7cb 100644 > --- a/drivers/reset/Kconfig > +++ b/drivers/reset/Kconfig > @@ -22,6 +22,13 @@ config RESET_A10SR > This option enables support for the external reset functions for > peripheral PHYs on the Altera Arria10 System Resource Chip. > > +config RESET_ASPEED > + tristate "ASPEED Reset Driver" > + depends on ARCH_ASPEED || COMPILE_TEST > + select AUXILIARY_BUS > + help > + This enables the reset controller driver for AST2700. > + > config RESET_ATH79 > bool "AR71xx Reset Driver" if COMPILE_TEST > default ATH79 > diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile > index 27b0bbdfcc04..97482bb56416 100644 > --- a/drivers/reset/Makefile > +++ b/drivers/reset/Makefile > @@ -5,6 +5,7 @@ obj-y += starfive/ > obj-y += sti/ > obj-y += tegra/ > obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o > +obj-$(CONFIG_RESET_ASPEED) += reset-aspeed.o > obj-$(CONFIG_RESET_ATH79) += reset-ath79.o > obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o > obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o > diff --git a/drivers/reset/reset-aspeed.c b/drivers/reset/reset-aspeed.c > new file mode 100644 > index 000000000000..8a2a68ac442b > --- /dev/null > +++ b/drivers/reset/reset-aspeed.c > @@ -0,0 +1,256 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Copyright (c) 2024 ASPEED Technology Inc. > + */ > + > +#include <linux/auxiliary_bus.h> Missing #include <linux/cleanup.h> for guard(). > +#include <linux/device.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/reset-controller.h> > + > +#include <dt-bindings/reset/aspeed,ast2700-scu.h> > + > +#define SCU0_RESET_CTRL1 0x200 > +#define SCU0_RESET_CTRL2 0x220 > +#define SCU1_RESET_CTRL1 0x200 > +#define SCU1_RESET_CTRL2 0x220 > +#define SCU1_PCIE3_CTRL 0x908 > + > +struct ast2700_reset_signal { > + bool dedicated_clr; /* dedicated reset clr offset */ > + u32 offset, bit; > +}; > + > +struct aspeed_reset_info { > + unsigned int nr_resets; > + const struct ast2700_reset_signal *signal; > +}; > + > +struct aspeed_reset { > + struct reset_controller_dev rcdev; > + struct aspeed_reset_info *info; > + spinlock_t lock; /* Protect read-modify-write cycle */ > + void __iomem *base; > +}; > + > +static const struct ast2700_reset_signal ast2700_reset0_signals[] = { > + [SCU0_RESET_SDRAM] = { true, SCU0_RESET_CTRL1, BIT(0) }, > + [SCU0_RESET_DDRPHY] = { true, SCU0_RESET_CTRL1, BIT(1) }, > + [SCU0_RESET_RSA] = { true, SCU0_RESET_CTRL1, BIT(2) }, > + [SCU0_RESET_SHA3] = { true, SCU0_RESET_CTRL1, BIT(3) }, > + [SCU0_RESET_HACE] = { true, SCU0_RESET_CTRL1, BIT(4) }, > + [SCU0_RESET_SOC] = { true, SCU0_RESET_CTRL1, BIT(5) }, > + [SCU0_RESET_VIDEO] = { true, SCU0_RESET_CTRL1, BIT(6) }, > + [SCU0_RESET_2D] = { true, SCU0_RESET_CTRL1, BIT(7) }, > + [SCU0_RESET_PCIS] = { true, SCU0_RESET_CTRL1, BIT(8) }, > + [SCU0_RESET_RVAS0] = { true, SCU0_RESET_CTRL1, BIT(9) }, > + [SCU0_RESET_RVAS1] = { true, SCU0_RESET_CTRL1, BIT(10) }, > + [SCU0_RESET_SM3] = { true, SCU0_RESET_CTRL1, BIT(11) }, > + [SCU0_RESET_SM4] = { true, SCU0_RESET_CTRL1, BIT(12) }, > + [SCU0_RESET_CRT0] = { true, SCU0_RESET_CTRL1, BIT(13) }, > + [SCU0_RESET_ECC] = { true, SCU0_RESET_CTRL1, BIT(14) }, > + [SCU0_RESET_DP_PCI] = { true, SCU0_RESET_CTRL1, BIT(15) }, > + [SCU0_RESET_UFS] = { true, SCU0_RESET_CTRL1, BIT(16) }, > + [SCU0_RESET_EMMC] = { true, SCU0_RESET_CTRL1, BIT(17) }, > + [SCU0_RESET_PCIE1RST] = { true, SCU0_RESET_CTRL1, BIT(18) }, > + [SCU0_RESET_PCIE1RSTOE] = { true, SCU0_RESET_CTRL1, BIT(19) }, > + [SCU0_RESET_PCIE0RST] = { true, SCU0_RESET_CTRL1, BIT(20) }, > + [SCU0_RESET_PCIE0RSTOE] = { true, SCU0_RESET_CTRL1, BIT(21) }, > + [SCU0_RESET_JTAG] = { true, SCU0_RESET_CTRL1, BIT(22) }, > + [SCU0_RESET_MCTP0] = { true, SCU0_RESET_CTRL1, BIT(23) }, > + [SCU0_RESET_MCTP1] = { true, SCU0_RESET_CTRL1, BIT(24) }, > + [SCU0_RESET_XDMA0] = { true, SCU0_RESET_CTRL1, BIT(25) }, > + [SCU0_RESET_XDMA1] = { true, SCU0_RESET_CTRL1, BIT(26) }, > + [SCU0_RESET_H2X1] = { true, SCU0_RESET_CTRL1, BIT(27) }, > + [SCU0_RESET_DP] = { true, SCU0_RESET_CTRL1, BIT(28) }, > + [SCU0_RESET_DP_MCU] = { true, SCU0_RESET_CTRL1, BIT(29) }, > + [SCU0_RESET_SSP] = { true, SCU0_RESET_CTRL1, BIT(30) }, > + [SCU0_RESET_H2X0] = { true, SCU0_RESET_CTRL1, BIT(31) }, > + [SCU0_RESET_PORTA_VHUB] = { true, SCU0_RESET_CTRL2, BIT(0) }, > + [SCU0_RESET_PORTA_PHY3] = { true, SCU0_RESET_CTRL2, BIT(1) }, > + [SCU0_RESET_PORTA_XHCI] = { true, SCU0_RESET_CTRL2, BIT(2) }, > + [SCU0_RESET_PORTB_VHUB] = { true, SCU0_RESET_CTRL2, BIT(3) }, > + [SCU0_RESET_PORTB_PHY3] = { true, SCU0_RESET_CTRL2, BIT(4) }, > + [SCU0_RESET_PORTB_XHCI] = { true, SCU0_RESET_CTRL2, BIT(5) }, > + [SCU0_RESET_PORTA_VHUB_EHCI] = { true, SCU0_RESET_CTRL2, BIT(6) }, > + [SCU0_RESET_PORTB_VHUB_EHCI] = { true, SCU0_RESET_CTRL2, BIT(7) }, > + [SCU0_RESET_UHCI] = { true, SCU0_RESET_CTRL2, BIT(8) }, > + [SCU0_RESET_TSP] = { true, SCU0_RESET_CTRL2, BIT(9) }, > + [SCU0_RESET_E2M0] = { true, SCU0_RESET_CTRL2, BIT(10) }, > + [SCU0_RESET_E2M1] = { true, SCU0_RESET_CTRL2, BIT(11) }, > + [SCU0_RESET_VLINK] = { true, SCU0_RESET_CTRL2, BIT(12) }, > +}; > + > +static const struct ast2700_reset_signal ast2700_reset1_signals[] = { > + [SCU1_RESET_LPC0] = { true, SCU1_RESET_CTRL1, BIT(0) }, > + [SCU1_RESET_LPC1] = { true, SCU1_RESET_CTRL1, BIT(1) }, > + [SCU1_RESET_MII] = { true, SCU1_RESET_CTRL1, BIT(2) }, > + [SCU1_RESET_PECI] = { true, SCU1_RESET_CTRL1, BIT(3) }, > + [SCU1_RESET_PWM] = { true, SCU1_RESET_CTRL1, BIT(4) }, > + [SCU1_RESET_MAC0] = { true, SCU1_RESET_CTRL1, BIT(5) }, > + [SCU1_RESET_MAC1] = { true, SCU1_RESET_CTRL1, BIT(6) }, > + [SCU1_RESET_MAC2] = { true, SCU1_RESET_CTRL1, BIT(7) }, > + [SCU1_RESET_ADC] = { true, SCU1_RESET_CTRL1, BIT(8) }, > + [SCU1_RESET_SD] = { true, SCU1_RESET_CTRL1, BIT(9) }, > + [SCU1_RESET_ESPI0] = { true, SCU1_RESET_CTRL1, BIT(10) }, > + [SCU1_RESET_ESPI1] = { true, SCU1_RESET_CTRL1, BIT(11) }, > + [SCU1_RESET_JTAG1] = { true, SCU1_RESET_CTRL1, BIT(12) }, > + [SCU1_RESET_SPI0] = { true, SCU1_RESET_CTRL1, BIT(13) }, > + [SCU1_RESET_SPI1] = { true, SCU1_RESET_CTRL1, BIT(14) }, > + [SCU1_RESET_SPI2] = { true, SCU1_RESET_CTRL1, BIT(15) }, > + [SCU1_RESET_I3C0] = { true, SCU1_RESET_CTRL1, BIT(16) }, > + [SCU1_RESET_I3C1] = { true, SCU1_RESET_CTRL1, BIT(17) }, > + [SCU1_RESET_I3C2] = { true, SCU1_RESET_CTRL1, BIT(18) }, > + [SCU1_RESET_I3C3] = { true, SCU1_RESET_CTRL1, BIT(19) }, > + [SCU1_RESET_I3C4] = { true, SCU1_RESET_CTRL1, BIT(20) }, > + [SCU1_RESET_I3C5] = { true, SCU1_RESET_CTRL1, BIT(21) }, > + [SCU1_RESET_I3C6] = { true, SCU1_RESET_CTRL1, BIT(22) }, > + [SCU1_RESET_I3C7] = { true, SCU1_RESET_CTRL1, BIT(23) }, > + [SCU1_RESET_I3C8] = { true, SCU1_RESET_CTRL1, BIT(24) }, > + [SCU1_RESET_I3C9] = { true, SCU1_RESET_CTRL1, BIT(25) }, > + [SCU1_RESET_I3C10] = { true, SCU1_RESET_CTRL1, BIT(26) }, > + [SCU1_RESET_I3C11] = { true, SCU1_RESET_CTRL1, BIT(27) }, > + [SCU1_RESET_I3C12] = { true, SCU1_RESET_CTRL1, BIT(28) }, > + [SCU1_RESET_I3C13] = { true, SCU1_RESET_CTRL1, BIT(29) }, > + [SCU1_RESET_I3C14] = { true, SCU1_RESET_CTRL1, BIT(30) }, > + [SCU1_RESET_I3C15] = { true, SCU1_RESET_CTRL1, BIT(31) }, > + [SCU1_RESET_MCU0] = { true, SCU1_RESET_CTRL2, BIT(0) }, > + [SCU1_RESET_MCU1] = { true, SCU1_RESET_CTRL2, BIT(1) }, > + [SCU1_RESET_H2A_SPI1] = { true, SCU1_RESET_CTRL2, BIT(2) }, > + [SCU1_RESET_H2A_SPI2] = { true, SCU1_RESET_CTRL2, BIT(3) }, > + [SCU1_RESET_UART0] = { true, SCU1_RESET_CTRL2, BIT(4) }, > + [SCU1_RESET_UART1] = { true, SCU1_RESET_CTRL2, BIT(5) }, > + [SCU1_RESET_UART2] = { true, SCU1_RESET_CTRL2, BIT(6) }, > + [SCU1_RESET_UART3] = { true, SCU1_RESET_CTRL2, BIT(7) }, > + [SCU1_RESET_I2C_FILTER] = { true, SCU1_RESET_CTRL2, BIT(8) }, > + [SCU1_RESET_CALIPTRA] = { true, SCU1_RESET_CTRL2, BIT(9) }, > + [SCU1_RESET_XDMA] = { true, SCU1_RESET_CTRL2, BIT(10) }, > + [SCU1_RESET_FSI] = { true, SCU1_RESET_CTRL2, BIT(12) }, > + [SCU1_RESET_CAN] = { true, SCU1_RESET_CTRL2, BIT(13) }, > + [SCU1_RESET_MCTP] = { true, SCU1_RESET_CTRL2, BIT(14) }, > + [SCU1_RESET_I2C] = { true, SCU1_RESET_CTRL2, BIT(15) }, > + [SCU1_RESET_UART6] = { true, SCU1_RESET_CTRL2, BIT(16) }, > + [SCU1_RESET_UART7] = { true, SCU1_RESET_CTRL2, BIT(17) }, > + [SCU1_RESET_UART8] = { true, SCU1_RESET_CTRL2, BIT(18) }, > + [SCU1_RESET_UART9] = { true, SCU1_RESET_CTRL2, BIT(19) }, > + [SCU1_RESET_LTPI0] = { true, SCU1_RESET_CTRL2, BIT(20) }, > + [SCU1_RESET_VGAL] = { true, SCU1_RESET_CTRL2, BIT(21) }, > + [SCU1_RESET_LTPI1] = { true, SCU1_RESET_CTRL2, BIT(22) }, > + [SCU1_RESET_ACE] = { true, SCU1_RESET_CTRL2, BIT(23) }, > + [SCU1_RESET_E2M] = { true, SCU1_RESET_CTRL2, BIT(24) }, > + [SCU1_RESET_UHCI] = { true, SCU1_RESET_CTRL2, BIT(25) }, > + [SCU1_RESET_PORTC_USB2UART] = { true, SCU1_RESET_CTRL2, BIT(26) }, > + [SCU1_RESET_PORTC_VHUB_EHCI] = { true, SCU1_RESET_CTRL2, BIT(27) }, > + [SCU1_RESET_PORTD_USB2UART] = { true, SCU1_RESET_CTRL2, BIT(28) }, > + [SCU1_RESET_PORTD_VHUB_EHCI] = { true, SCU1_RESET_CTRL2, BIT(29) }, > + [SCU1_RESET_H2X] = { true, SCU1_RESET_CTRL2, BIT(30) }, > + [SCU1_RESET_I3CDMA] = { true, SCU1_RESET_CTRL2, BIT(31) }, > + [SCU1_RESET_PCIE2RST] = { false, SCU1_PCIE3_CTRL, BIT(0) }, > +}; > + > +static inline struct aspeed_reset *to_aspeed_reset(struct reset_controller_dev *rcdev) > +{ > + return container_of(rcdev, struct aspeed_reset, rcdev); > +} > + > +static int aspeed_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) > +{ > + struct aspeed_reset *rc = to_aspeed_reset(rcdev); > + void __iomem *reg_offset = rc->base + rc->info->signal[id].offset; > + > + if (rc->info->signal[id].dedicated_clr) { > + writel(rc->info->signal[id].bit, reg_offset); > + } else { > + guard(spinlock_irqsave)(&rc->lock); > + writel(readl(reg_offset) & ~rc->info->signal[id].bit, reg_offset); > + } > + > + return 0; > +} > + > +static int aspeed_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) > +{ > + struct aspeed_reset *rc = to_aspeed_reset(rcdev); > + void __iomem *reg_offset = rc->base + rc->info->signal[id].offset; > + > + if (rc->info->signal[id].dedicated_clr) { > + writel(rc->info->signal[id].bit, reg_offset + 0x04); > + } else { > + guard(spinlock_irqsave)(&rc->lock); > + writel(readl(reg_offset) | rc->info->signal[id].bit, reg_offset); > + } > + > + return 0; > +} > + > +static int aspeed_reset_status(struct reset_controller_dev *rcdev, unsigned long id) > +{ > + struct aspeed_reset *rc = to_aspeed_reset(rcdev); > + void __iomem *reg_offset = rc->base + rc->info->signal[id].offset; > + > + return (readl(reg_offset) & rc->info->signal[id].bit) ? 1 : 0; > +} > + > +static const struct reset_control_ops aspeed_reset_ops = { > + .assert = aspeed_reset_assert, > + .deassert = aspeed_reset_deassert, > + .status = aspeed_reset_status, > +}; > + > +static int aspeed_reset_probe(struct auxiliary_device *adev, > + const struct auxiliary_device_id *id) > +{ > + struct aspeed_reset *reset; > + struct device *dev = &adev->dev; > + > + reset = devm_kzalloc(dev, sizeof(*reset), GFP_KERNEL); > + if (!reset) > + return -ENOMEM; > + > + spin_lock_init(&reset->lock); > + > + reset->info = (struct aspeed_reset_info *)id->driver_data; > + reset->rcdev.owner = THIS_MODULE; > + reset->rcdev.nr_resets = reset->info->nr_resets; > + reset->rcdev.ops = &aspeed_reset_ops; > + reset->rcdev.of_node = dev->parent->of_node; > + reset->rcdev.dev = dev; > + reset->rcdev.of_reset_n_cells = 1; > + reset->base = (void __iomem *)adev->dev.platform_data; > + > + if (!reset->base) > + return -ENOMEM; Looks like this should be -EINVAL to me. If aspeed_reset_controller_register() is moved into the reset driver, like it is done in reset-mpfs, this check could be dropped completely. With these issues addressed, Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> regards Philipp
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 67bce340a87e..71a3accea7cb 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -22,6 +22,13 @@ config RESET_A10SR This option enables support for the external reset functions for peripheral PHYs on the Altera Arria10 System Resource Chip. +config RESET_ASPEED + tristate "ASPEED Reset Driver" + depends on ARCH_ASPEED || COMPILE_TEST + select AUXILIARY_BUS + help + This enables the reset controller driver for AST2700. + config RESET_ATH79 bool "AR71xx Reset Driver" if COMPILE_TEST default ATH79 diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 27b0bbdfcc04..97482bb56416 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -5,6 +5,7 @@ obj-y += starfive/ obj-y += sti/ obj-y += tegra/ obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o +obj-$(CONFIG_RESET_ASPEED) += reset-aspeed.o obj-$(CONFIG_RESET_ATH79) += reset-ath79.o obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o diff --git a/drivers/reset/reset-aspeed.c b/drivers/reset/reset-aspeed.c new file mode 100644 index 000000000000..8a2a68ac442b --- /dev/null +++ b/drivers/reset/reset-aspeed.c @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2024 ASPEED Technology Inc. + */ + +#include <linux/auxiliary_bus.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/reset-controller.h> + +#include <dt-bindings/reset/aspeed,ast2700-scu.h> + +#define SCU0_RESET_CTRL1 0x200 +#define SCU0_RESET_CTRL2 0x220 +#define SCU1_RESET_CTRL1 0x200 +#define SCU1_RESET_CTRL2 0x220 +#define SCU1_PCIE3_CTRL 0x908 + +struct ast2700_reset_signal { + bool dedicated_clr; /* dedicated reset clr offset */ + u32 offset, bit; +}; + +struct aspeed_reset_info { + unsigned int nr_resets; + const struct ast2700_reset_signal *signal; +}; + +struct aspeed_reset { + struct reset_controller_dev rcdev; + struct aspeed_reset_info *info; + spinlock_t lock; /* Protect read-modify-write cycle */ + void __iomem *base; +}; + +static const struct ast2700_reset_signal ast2700_reset0_signals[] = { + [SCU0_RESET_SDRAM] = { true, SCU0_RESET_CTRL1, BIT(0) }, + [SCU0_RESET_DDRPHY] = { true, SCU0_RESET_CTRL1, BIT(1) }, + [SCU0_RESET_RSA] = { true, SCU0_RESET_CTRL1, BIT(2) }, + [SCU0_RESET_SHA3] = { true, SCU0_RESET_CTRL1, BIT(3) }, + [SCU0_RESET_HACE] = { true, SCU0_RESET_CTRL1, BIT(4) }, + [SCU0_RESET_SOC] = { true, SCU0_RESET_CTRL1, BIT(5) }, + [SCU0_RESET_VIDEO] = { true, SCU0_RESET_CTRL1, BIT(6) }, + [SCU0_RESET_2D] = { true, SCU0_RESET_CTRL1, BIT(7) }, + [SCU0_RESET_PCIS] = { true, SCU0_RESET_CTRL1, BIT(8) }, + [SCU0_RESET_RVAS0] = { true, SCU0_RESET_CTRL1, BIT(9) }, + [SCU0_RESET_RVAS1] = { true, SCU0_RESET_CTRL1, BIT(10) }, + [SCU0_RESET_SM3] = { true, SCU0_RESET_CTRL1, BIT(11) }, + [SCU0_RESET_SM4] = { true, SCU0_RESET_CTRL1, BIT(12) }, + [SCU0_RESET_CRT0] = { true, SCU0_RESET_CTRL1, BIT(13) }, + [SCU0_RESET_ECC] = { true, SCU0_RESET_CTRL1, BIT(14) }, + [SCU0_RESET_DP_PCI] = { true, SCU0_RESET_CTRL1, BIT(15) }, + [SCU0_RESET_UFS] = { true, SCU0_RESET_CTRL1, BIT(16) }, + [SCU0_RESET_EMMC] = { true, SCU0_RESET_CTRL1, BIT(17) }, + [SCU0_RESET_PCIE1RST] = { true, SCU0_RESET_CTRL1, BIT(18) }, + [SCU0_RESET_PCIE1RSTOE] = { true, SCU0_RESET_CTRL1, BIT(19) }, + [SCU0_RESET_PCIE0RST] = { true, SCU0_RESET_CTRL1, BIT(20) }, + [SCU0_RESET_PCIE0RSTOE] = { true, SCU0_RESET_CTRL1, BIT(21) }, + [SCU0_RESET_JTAG] = { true, SCU0_RESET_CTRL1, BIT(22) }, + [SCU0_RESET_MCTP0] = { true, SCU0_RESET_CTRL1, BIT(23) }, + [SCU0_RESET_MCTP1] = { true, SCU0_RESET_CTRL1, BIT(24) }, + [SCU0_RESET_XDMA0] = { true, SCU0_RESET_CTRL1, BIT(25) }, + [SCU0_RESET_XDMA1] = { true, SCU0_RESET_CTRL1, BIT(26) }, + [SCU0_RESET_H2X1] = { true, SCU0_RESET_CTRL1, BIT(27) }, + [SCU0_RESET_DP] = { true, SCU0_RESET_CTRL1, BIT(28) }, + [SCU0_RESET_DP_MCU] = { true, SCU0_RESET_CTRL1, BIT(29) }, + [SCU0_RESET_SSP] = { true, SCU0_RESET_CTRL1, BIT(30) }, + [SCU0_RESET_H2X0] = { true, SCU0_RESET_CTRL1, BIT(31) }, + [SCU0_RESET_PORTA_VHUB] = { true, SCU0_RESET_CTRL2, BIT(0) }, + [SCU0_RESET_PORTA_PHY3] = { true, SCU0_RESET_CTRL2, BIT(1) }, + [SCU0_RESET_PORTA_XHCI] = { true, SCU0_RESET_CTRL2, BIT(2) }, + [SCU0_RESET_PORTB_VHUB] = { true, SCU0_RESET_CTRL2, BIT(3) }, + [SCU0_RESET_PORTB_PHY3] = { true, SCU0_RESET_CTRL2, BIT(4) }, + [SCU0_RESET_PORTB_XHCI] = { true, SCU0_RESET_CTRL2, BIT(5) }, + [SCU0_RESET_PORTA_VHUB_EHCI] = { true, SCU0_RESET_CTRL2, BIT(6) }, + [SCU0_RESET_PORTB_VHUB_EHCI] = { true, SCU0_RESET_CTRL2, BIT(7) }, + [SCU0_RESET_UHCI] = { true, SCU0_RESET_CTRL2, BIT(8) }, + [SCU0_RESET_TSP] = { true, SCU0_RESET_CTRL2, BIT(9) }, + [SCU0_RESET_E2M0] = { true, SCU0_RESET_CTRL2, BIT(10) }, + [SCU0_RESET_E2M1] = { true, SCU0_RESET_CTRL2, BIT(11) }, + [SCU0_RESET_VLINK] = { true, SCU0_RESET_CTRL2, BIT(12) }, +}; + +static const struct ast2700_reset_signal ast2700_reset1_signals[] = { + [SCU1_RESET_LPC0] = { true, SCU1_RESET_CTRL1, BIT(0) }, + [SCU1_RESET_LPC1] = { true, SCU1_RESET_CTRL1, BIT(1) }, + [SCU1_RESET_MII] = { true, SCU1_RESET_CTRL1, BIT(2) }, + [SCU1_RESET_PECI] = { true, SCU1_RESET_CTRL1, BIT(3) }, + [SCU1_RESET_PWM] = { true, SCU1_RESET_CTRL1, BIT(4) }, + [SCU1_RESET_MAC0] = { true, SCU1_RESET_CTRL1, BIT(5) }, + [SCU1_RESET_MAC1] = { true, SCU1_RESET_CTRL1, BIT(6) }, + [SCU1_RESET_MAC2] = { true, SCU1_RESET_CTRL1, BIT(7) }, + [SCU1_RESET_ADC] = { true, SCU1_RESET_CTRL1, BIT(8) }, + [SCU1_RESET_SD] = { true, SCU1_RESET_CTRL1, BIT(9) }, + [SCU1_RESET_ESPI0] = { true, SCU1_RESET_CTRL1, BIT(10) }, + [SCU1_RESET_ESPI1] = { true, SCU1_RESET_CTRL1, BIT(11) }, + [SCU1_RESET_JTAG1] = { true, SCU1_RESET_CTRL1, BIT(12) }, + [SCU1_RESET_SPI0] = { true, SCU1_RESET_CTRL1, BIT(13) }, + [SCU1_RESET_SPI1] = { true, SCU1_RESET_CTRL1, BIT(14) }, + [SCU1_RESET_SPI2] = { true, SCU1_RESET_CTRL1, BIT(15) }, + [SCU1_RESET_I3C0] = { true, SCU1_RESET_CTRL1, BIT(16) }, + [SCU1_RESET_I3C1] = { true, SCU1_RESET_CTRL1, BIT(17) }, + [SCU1_RESET_I3C2] = { true, SCU1_RESET_CTRL1, BIT(18) }, + [SCU1_RESET_I3C3] = { true, SCU1_RESET_CTRL1, BIT(19) }, + [SCU1_RESET_I3C4] = { true, SCU1_RESET_CTRL1, BIT(20) }, + [SCU1_RESET_I3C5] = { true, SCU1_RESET_CTRL1, BIT(21) }, + [SCU1_RESET_I3C6] = { true, SCU1_RESET_CTRL1, BIT(22) }, + [SCU1_RESET_I3C7] = { true, SCU1_RESET_CTRL1, BIT(23) }, + [SCU1_RESET_I3C8] = { true, SCU1_RESET_CTRL1, BIT(24) }, + [SCU1_RESET_I3C9] = { true, SCU1_RESET_CTRL1, BIT(25) }, + [SCU1_RESET_I3C10] = { true, SCU1_RESET_CTRL1, BIT(26) }, + [SCU1_RESET_I3C11] = { true, SCU1_RESET_CTRL1, BIT(27) }, + [SCU1_RESET_I3C12] = { true, SCU1_RESET_CTRL1, BIT(28) }, + [SCU1_RESET_I3C13] = { true, SCU1_RESET_CTRL1, BIT(29) }, + [SCU1_RESET_I3C14] = { true, SCU1_RESET_CTRL1, BIT(30) }, + [SCU1_RESET_I3C15] = { true, SCU1_RESET_CTRL1, BIT(31) }, + [SCU1_RESET_MCU0] = { true, SCU1_RESET_CTRL2, BIT(0) }, + [SCU1_RESET_MCU1] = { true, SCU1_RESET_CTRL2, BIT(1) }, + [SCU1_RESET_H2A_SPI1] = { true, SCU1_RESET_CTRL2, BIT(2) }, + [SCU1_RESET_H2A_SPI2] = { true, SCU1_RESET_CTRL2, BIT(3) }, + [SCU1_RESET_UART0] = { true, SCU1_RESET_CTRL2, BIT(4) }, + [SCU1_RESET_UART1] = { true, SCU1_RESET_CTRL2, BIT(5) }, + [SCU1_RESET_UART2] = { true, SCU1_RESET_CTRL2, BIT(6) }, + [SCU1_RESET_UART3] = { true, SCU1_RESET_CTRL2, BIT(7) }, + [SCU1_RESET_I2C_FILTER] = { true, SCU1_RESET_CTRL2, BIT(8) }, + [SCU1_RESET_CALIPTRA] = { true, SCU1_RESET_CTRL2, BIT(9) }, + [SCU1_RESET_XDMA] = { true, SCU1_RESET_CTRL2, BIT(10) }, + [SCU1_RESET_FSI] = { true, SCU1_RESET_CTRL2, BIT(12) }, + [SCU1_RESET_CAN] = { true, SCU1_RESET_CTRL2, BIT(13) }, + [SCU1_RESET_MCTP] = { true, SCU1_RESET_CTRL2, BIT(14) }, + [SCU1_RESET_I2C] = { true, SCU1_RESET_CTRL2, BIT(15) }, + [SCU1_RESET_UART6] = { true, SCU1_RESET_CTRL2, BIT(16) }, + [SCU1_RESET_UART7] = { true, SCU1_RESET_CTRL2, BIT(17) }, + [SCU1_RESET_UART8] = { true, SCU1_RESET_CTRL2, BIT(18) }, + [SCU1_RESET_UART9] = { true, SCU1_RESET_CTRL2, BIT(19) }, + [SCU1_RESET_LTPI0] = { true, SCU1_RESET_CTRL2, BIT(20) }, + [SCU1_RESET_VGAL] = { true, SCU1_RESET_CTRL2, BIT(21) }, + [SCU1_RESET_LTPI1] = { true, SCU1_RESET_CTRL2, BIT(22) }, + [SCU1_RESET_ACE] = { true, SCU1_RESET_CTRL2, BIT(23) }, + [SCU1_RESET_E2M] = { true, SCU1_RESET_CTRL2, BIT(24) }, + [SCU1_RESET_UHCI] = { true, SCU1_RESET_CTRL2, BIT(25) }, + [SCU1_RESET_PORTC_USB2UART] = { true, SCU1_RESET_CTRL2, BIT(26) }, + [SCU1_RESET_PORTC_VHUB_EHCI] = { true, SCU1_RESET_CTRL2, BIT(27) }, + [SCU1_RESET_PORTD_USB2UART] = { true, SCU1_RESET_CTRL2, BIT(28) }, + [SCU1_RESET_PORTD_VHUB_EHCI] = { true, SCU1_RESET_CTRL2, BIT(29) }, + [SCU1_RESET_H2X] = { true, SCU1_RESET_CTRL2, BIT(30) }, + [SCU1_RESET_I3CDMA] = { true, SCU1_RESET_CTRL2, BIT(31) }, + [SCU1_RESET_PCIE2RST] = { false, SCU1_PCIE3_CTRL, BIT(0) }, +}; + +static inline struct aspeed_reset *to_aspeed_reset(struct reset_controller_dev *rcdev) +{ + return container_of(rcdev, struct aspeed_reset, rcdev); +} + +static int aspeed_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct aspeed_reset *rc = to_aspeed_reset(rcdev); + void __iomem *reg_offset = rc->base + rc->info->signal[id].offset; + + if (rc->info->signal[id].dedicated_clr) { + writel(rc->info->signal[id].bit, reg_offset); + } else { + guard(spinlock_irqsave)(&rc->lock); + writel(readl(reg_offset) & ~rc->info->signal[id].bit, reg_offset); + } + + return 0; +} + +static int aspeed_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct aspeed_reset *rc = to_aspeed_reset(rcdev); + void __iomem *reg_offset = rc->base + rc->info->signal[id].offset; + + if (rc->info->signal[id].dedicated_clr) { + writel(rc->info->signal[id].bit, reg_offset + 0x04); + } else { + guard(spinlock_irqsave)(&rc->lock); + writel(readl(reg_offset) | rc->info->signal[id].bit, reg_offset); + } + + return 0; +} + +static int aspeed_reset_status(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct aspeed_reset *rc = to_aspeed_reset(rcdev); + void __iomem *reg_offset = rc->base + rc->info->signal[id].offset; + + return (readl(reg_offset) & rc->info->signal[id].bit) ? 1 : 0; +} + +static const struct reset_control_ops aspeed_reset_ops = { + .assert = aspeed_reset_assert, + .deassert = aspeed_reset_deassert, + .status = aspeed_reset_status, +}; + +static int aspeed_reset_probe(struct auxiliary_device *adev, + const struct auxiliary_device_id *id) +{ + struct aspeed_reset *reset; + struct device *dev = &adev->dev; + + reset = devm_kzalloc(dev, sizeof(*reset), GFP_KERNEL); + if (!reset) + return -ENOMEM; + + spin_lock_init(&reset->lock); + + reset->info = (struct aspeed_reset_info *)id->driver_data; + reset->rcdev.owner = THIS_MODULE; + reset->rcdev.nr_resets = reset->info->nr_resets; + reset->rcdev.ops = &aspeed_reset_ops; + reset->rcdev.of_node = dev->parent->of_node; + reset->rcdev.dev = dev; + reset->rcdev.of_reset_n_cells = 1; + reset->base = (void __iomem *)adev->dev.platform_data; + + if (!reset->base) + return -ENOMEM; + + return devm_reset_controller_register(dev, &reset->rcdev); +} + +static const struct aspeed_reset_info ast2700_reset0_info = { + .nr_resets = ARRAY_SIZE(ast2700_reset0_signals), + .signal = ast2700_reset0_signals, +}; + +static const struct aspeed_reset_info ast2700_reset1_info = { + .nr_resets = ARRAY_SIZE(ast2700_reset1_signals), + .signal = ast2700_reset1_signals, +}; + +static const struct auxiliary_device_id aspeed_reset_ids[] = { + { .name = "clk_ast2700.reset0", .driver_data = (kernel_ulong_t)&ast2700_reset0_info }, + { .name = "clk_ast2700.reset1", .driver_data = (kernel_ulong_t)&ast2700_reset1_info }, + { } +}; +MODULE_DEVICE_TABLE(auxiliary, aspeed_reset_ids); + +static struct auxiliary_driver aspeed_reset_driver = { + .probe = aspeed_reset_probe, + .id_table = aspeed_reset_ids, +}; + +module_auxiliary_driver(aspeed_reset_driver); + +MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>"); +MODULE_DESCRIPTION("ASPEED SoC Reset Controller Driver"); +MODULE_LICENSE("GPL");
The AST2700 reset driver is registered as an auxiliary device due to reset and clock controller share the same register region. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> --- drivers/reset/Kconfig | 7 + drivers/reset/Makefile | 1 + drivers/reset/reset-aspeed.c | 256 +++++++++++++++++++++++++++++++++++ 3 files changed, 264 insertions(+) create mode 100644 drivers/reset/reset-aspeed.c