@@ -379,7 +379,7 @@ int main(void)
OFFSET(VCPU_SPRG2, kvm_vcpu, arch.shregs.sprg2);
OFFSET(VCPU_SPRG3, kvm_vcpu, arch.shregs.sprg3);
#endif
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
OFFSET(VCPU_TB_RMENTRY, kvm_vcpu, arch.rm_entry);
OFFSET(VCPU_TB_RMINTR, kvm_vcpu, arch.rm_intr);
OFFSET(VCPU_TB_RMEXIT, kvm_vcpu, arch.rm_exit);
@@ -128,7 +128,11 @@ config KVM_BOOK3S_64_PR
and system calls on the host.
config KVM_BOOK3S_HV_EXIT_TIMING
- bool "Detailed timing for hypervisor real-mode code"
+ bool
+
+config KVM_BOOK3S_HV_P8_TIMING
+ bool "Detailed timing for hypervisor real-mode code (for POWER8)"
+ select KVM_BOOK3S_HV_EXIT_TIMING
depends on KVM_BOOK3S_HV_POSSIBLE && DEBUG_FS
help
Calculate time taken for each vcpu in the real-mode guest entry,
@@ -229,14 +229,14 @@ kvm_novcpu_wakeup:
cmpdi r4, 0
beq kvmppc_primary_no_guest
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
addi r3, r4, VCPU_TB_RMENTRY
bl kvmhv_start_timing
#endif
b kvmppc_got_guest
kvm_novcpu_exit:
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
ld r4, HSTATE_KVM_VCPU(r13)
cmpdi r4, 0
beq 13f
@@ -515,7 +515,7 @@ kvmppc_hv_entry:
li r6, KVM_GUEST_MODE_HOST_HV
stb r6, HSTATE_IN_GUEST(r13)
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
/* Store initial timestamp */
cmpdi r4, 0
beq 1f
@@ -886,7 +886,7 @@ fast_guest_return:
li r9, KVM_GUEST_MODE_GUEST_HV
stb r9, HSTATE_IN_GUEST(r13)
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
/* Accumulate timing */
addi r3, r4, VCPU_TB_GUEST
bl kvmhv_accumulate_time
@@ -937,7 +937,7 @@ secondary_too_late:
cmpdi r4, 0
beq 11f
stw r12, VCPU_TRAP(r4)
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
addi r3, r4, VCPU_TB_RMEXIT
bl kvmhv_accumulate_time
#endif
@@ -951,7 +951,7 @@ hdec_soon:
li r12, BOOK3S_INTERRUPT_HV_DECREMENTER
12: stw r12, VCPU_TRAP(r4)
mr r9, r4
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
addi r3, r4, VCPU_TB_RMEXIT
bl kvmhv_accumulate_time
#endif
@@ -1048,7 +1048,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
li r0, MSR_RI
mtmsrd r0, 1
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
addi r3, r9, VCPU_TB_RMINTR
mr r4, r9
bl kvmhv_accumulate_time
@@ -1127,7 +1127,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
guest_exit_cont: /* r9 = vcpu, r12 = trap, r13 = paca */
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
addi r3, r9, VCPU_TB_RMEXIT
mr r4, r9
bl kvmhv_accumulate_time
@@ -1487,7 +1487,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
mtspr SPRN_LPCR,r8
isync
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
/* Finish timing, if we have a vcpu */
ld r4, HSTATE_KVM_VCPU(r13)
cmpdi r4, 0
@@ -2155,7 +2155,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_TM)
ld r4, HSTATE_KVM_VCPU(r13)
std r3, VCPU_DEC_EXPIRES(r4)
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
ld r4, HSTATE_KVM_VCPU(r13)
addi r3, r4, VCPU_TB_CEDE
bl kvmhv_accumulate_time
@@ -2223,7 +2223,7 @@ kvm_end_cede:
/* get vcpu pointer */
ld r4, HSTATE_KVM_VCPU(r13)
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
addi r3, r4, VCPU_TB_RMINTR
bl kvmhv_accumulate_time
#endif
@@ -2963,7 +2963,7 @@ kvmppc_fix_pmao:
isync
blr
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+#ifdef CONFIG_KVM_BOOK3S_HV_P8_TIMING
/*
* Start timing an activity
* r3 = pointer to time accumulation struct, r4 = vcpu
Turn the existing Kconfig KVM_BOOK3S_HV_EXIT_TIMING into KVM_BOOK3S_HV_P8_TIMING in preparation for the addition of a new config for P9 timings. This applies only to P8 code, the generic timing code is still kept under KVM_BOOK3S_HV_EXIT_TIMING. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> --- arch/powerpc/kernel/asm-offsets.c | 2 +- arch/powerpc/kvm/Kconfig | 6 +++++- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 24 ++++++++++++------------ 3 files changed, 18 insertions(+), 14 deletions(-)