diff mbox

[FOR,0.12] qdev: Replace device names containing whitespace

Message ID m3my1t2o00.fsf@crossbow.pond.sub.org
State New
Headers show

Commit Message

Markus Armbruster Dec. 8, 2009, 8:45 p.m. UTC
Device names with whitespace require quoting in the shell and in the
monitor.  Some of the offenders are also overly long.  Some have a
more convenient alias, some don't.

The place for verbose device names is DeviceInfo member desc.  The
name should be short & sweet.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
I'm prepared to respin this patch with any device name changes found
objectionable dropped.

I hate the inconsistent use of '-' and '_' in device names, too, but not
enough to patch it in time for 0.12.

 hw/bt-hid.c      |    2 +-
 hw/cirrus_vga.c  |    5 +++--
 hw/grackle_pci.c |    4 ++--
 hw/ide/cmd646.c  |    4 ++--
 hw/ide/piix.c    |    8 ++++----
 hw/unin_pci.c    |   30 +++++++++++++++---------------
 hw/usb-bt.c      |    4 ++--
 hw/usb-bus.c     |    2 +-
 hw/usb-hid.c     |    9 +++------
 hw/usb-hub.c     |    2 +-
 hw/usb-msd.c     |    5 ++---
 hw/usb-net.c     |    4 ++--
 hw/usb-ohci.c    |    5 ++---
 hw/usb-serial.c  |   10 ++++------
 hw/usb-uhci.c    |    8 ++++----
 hw/usb-wacom.c   |    4 ++--
 hw/vmware_vga.c  |    4 ++--
 usb-bsd.c        |    4 ++--
 usb-linux.c      |    5 ++---
 19 files changed, 56 insertions(+), 63 deletions(-)

Comments

Gerd Hoffmann Dec. 9, 2009, 7:40 a.m. UTC | #1
> diff --git a/hw/usb-msd.c b/hw/usb-msd.c
> index bb39b62..dec35bc 100644
> --- a/hw/usb-msd.c
> +++ b/hw/usb-msd.c
> @@ -591,7 +591,7 @@ static USBDevice *usb_msd_init(const char *filename)
>       }
>
>       /* create guest device */
> -    dev = usb_create(NULL /* FIXME */, "QEMU USB MSD");
> +    dev = usb_create(NULL /* FIXME */, "usb-storage");
>       qdev_prop_set_drive(&dev->qdev, "drive", dinfo);
>       if (qdev_init(&dev->qdev)<  0)
>           return NULL;
> @@ -600,8 +600,7 @@ static USBDevice *usb_msd_init(const char *filename)
>   }
>
>   static struct USBDeviceInfo msd_info = {
> -    .qdev.name      = "QEMU USB MSD",
> -    .qdev.alias     = "usb-storage",
> +    .qdev.name      = "usb-storage",
>       .qdev.size      = sizeof(MSDState),
>       .init           = usb_msd_initfn,
>       .handle_packet  = usb_generic_handle_packet,

No.  USB needs some more care.  DeviceInfo->name is also used as default 
value for USBDevice->devname.  See usb_qdev_init().   Most usb backends 
don't change it.  So this change is visible in both 'info usb' monitor 
command and within the guest (check /proc/bus/usb/devices).

I'd suggest to add a new field to USBDeviceInfo, stick the long name 
there and use that in usb_qdev_init() then.

Otherwise the patch looks fine to me.

cheers,
   Gerd
Markus Armbruster Dec. 9, 2009, 8:09 a.m. UTC | #2
Gerd Hoffmann <kraxel@redhat.com> writes:

>> diff --git a/hw/usb-msd.c b/hw/usb-msd.c
>> index bb39b62..dec35bc 100644
>> --- a/hw/usb-msd.c
>> +++ b/hw/usb-msd.c
>> @@ -591,7 +591,7 @@ static USBDevice *usb_msd_init(const char *filename)
>>       }
>>
>>       /* create guest device */
>> -    dev = usb_create(NULL /* FIXME */, "QEMU USB MSD");
>> +    dev = usb_create(NULL /* FIXME */, "usb-storage");
>>       qdev_prop_set_drive(&dev->qdev, "drive", dinfo);
>>       if (qdev_init(&dev->qdev)<  0)
>>           return NULL;
>> @@ -600,8 +600,7 @@ static USBDevice *usb_msd_init(const char *filename)
>>   }
>>
>>   static struct USBDeviceInfo msd_info = {
>> -    .qdev.name      = "QEMU USB MSD",
>> -    .qdev.alias     = "usb-storage",
>> +    .qdev.name      = "usb-storage",
>>       .qdev.size      = sizeof(MSDState),
>>       .init           = usb_msd_initfn,
>>       .handle_packet  = usb_generic_handle_packet,
>
> No.  USB needs some more care.  DeviceInfo->name is also used as
> default value for USBDevice->devname.  See usb_qdev_init().   Most usb
> backends don't change it.  So this change is visible in both 'info
> usb' monitor command and within the guest (check
> /proc/bus/usb/devices).
>
> I'd suggest to add a new field to USBDeviceInfo, stick the long name
> there and use that in usb_qdev_init() then.

I missed that needle in the "grep -w name" haystack.

> Otherwise the patch looks fine to me.

Will fix.  Thanks!
Ian Molton Dec. 9, 2009, 9:28 a.m. UTC | #3
Markus Armbruster wrote:

> The place for verbose device names is DeviceInfo member desc.  The
> name should be short & sweet.

Agreed, however...

Why do these (maybe others) get caps in their names? they dont look
right to me, compared to the others with nice names like usb-serial,
piix-ide, or cirrus-vga.

> -    sysbus_register_dev("Uni-north main", sizeof(UNINState),
> +    sysbus_register_dev("Uni-north-main", sizeof(UNINState),
>                          pci_unin_main_init_device);
>      pci_qdev_register(&unin_main_pci_host_info);
> -    sysbus_register_dev("DEC 21154", sizeof(UNINState),
> +    sysbus_register_dev("DEC-21154", sizeof(UNINState),
>                          pci_dec_21154_init_device);
>      pci_qdev_register(&dec_21154_pci_host_info);
> -    sysbus_register_dev("Uni-north AGP", sizeof(UNINState),
> +    sysbus_register_dev("Uni-north-AGP", sizeof(UNINState),
>                          pci_unin_agp_init_device);
>      pci_qdev_register(&unin_agp_pci_host_info);
> -    sysbus_register_dev("Uni-north internal", sizeof(UNINState),
> +    sysbus_register_dev("Uni-north-internal", sizeof(UNINState),
>                          pci_unin_internal_init_device);
>      pci_qdev_register(&unin_internal_pci_host_info);
>  }

-Ian
Markus Armbruster Dec. 9, 2009, 9:43 a.m. UTC | #4
Ian Molton <ian.molton@collabora.co.uk> writes:

> Markus Armbruster wrote:
>
>> The place for verbose device names is DeviceInfo member desc.  The
>> name should be short & sweet.
>
> Agreed, however...
>
> Why do these (maybe others) get caps in their names? they dont look
> right to me, compared to the others with nice names like usb-serial,
> piix-ide, or cirrus-vga.
>
>> -    sysbus_register_dev("Uni-north main", sizeof(UNINState),
>> +    sysbus_register_dev("Uni-north-main", sizeof(UNINState),
>>                          pci_unin_main_init_device);
>>      pci_qdev_register(&unin_main_pci_host_info);
>> -    sysbus_register_dev("DEC 21154", sizeof(UNINState),
>> +    sysbus_register_dev("DEC-21154", sizeof(UNINState),
>>                          pci_dec_21154_init_device);
>>      pci_qdev_register(&dec_21154_pci_host_info);
>> -    sysbus_register_dev("Uni-north AGP", sizeof(UNINState),
>> +    sysbus_register_dev("Uni-north-AGP", sizeof(UNINState),
>>                          pci_unin_agp_init_device);
>>      pci_qdev_register(&unin_agp_pci_host_info);
>> -    sysbus_register_dev("Uni-north internal", sizeof(UNINState),
>> +    sysbus_register_dev("Uni-north-internal", sizeof(UNINState),
>>                          pci_unin_internal_init_device);
>>      pci_qdev_register(&unin_internal_pci_host_info);
>>  }

I can downcase them.  Blue Swirl, any objections?
Blue Swirl Dec. 12, 2009, 8:58 a.m. UTC | #5
On Wed, Dec 9, 2009 at 11:43 AM, Markus Armbruster <armbru@redhat.com> wrote:
> Ian Molton <ian.molton@collabora.co.uk> writes:
>
>> Markus Armbruster wrote:
>>
>>> The place for verbose device names is DeviceInfo member desc.  The
>>> name should be short & sweet.
>>
>> Agreed, however...
>>
>> Why do these (maybe others) get caps in their names? they dont look
>> right to me, compared to the others with nice names like usb-serial,
>> piix-ide, or cirrus-vga.
>>
>>> -    sysbus_register_dev("Uni-north main", sizeof(UNINState),
>>> +    sysbus_register_dev("Uni-north-main", sizeof(UNINState),
>>>                          pci_unin_main_init_device);
>>>      pci_qdev_register(&unin_main_pci_host_info);
>>> -    sysbus_register_dev("DEC 21154", sizeof(UNINState),
>>> +    sysbus_register_dev("DEC-21154", sizeof(UNINState),
>>>                          pci_dec_21154_init_device);
>>>      pci_qdev_register(&dec_21154_pci_host_info);
>>> -    sysbus_register_dev("Uni-north AGP", sizeof(UNINState),
>>> +    sysbus_register_dev("Uni-north-AGP", sizeof(UNINState),
>>>                          pci_unin_agp_init_device);
>>>      pci_qdev_register(&unin_agp_pci_host_info);
>>> -    sysbus_register_dev("Uni-north internal", sizeof(UNINState),
>>> +    sysbus_register_dev("Uni-north-internal", sizeof(UNINState),
>>>                          pci_unin_internal_init_device);
>>>      pci_qdev_register(&unin_internal_pci_host_info);
>>>  }
>
> I can downcase them.  Blue Swirl, any objections?
>

I'd prefer the same names that are used by the device tree, like uni-n
and uni-north-agp. Though the bridge is name poorly, just
"pci-bridge".

For example:
http://penguinppc.org/historical/dev-trees-html/imac_400_1.html
Markus Armbruster Dec. 12, 2009, 6:04 p.m. UTC | #6
Blue Swirl <blauwirbel@gmail.com> writes:

> On Wed, Dec 9, 2009 at 11:43 AM, Markus Armbruster <armbru@redhat.com> wrote:
>> Ian Molton <ian.molton@collabora.co.uk> writes:
>>
>>> Markus Armbruster wrote:
>>>
>>>> The place for verbose device names is DeviceInfo member desc.  The
>>>> name should be short & sweet.
>>>
>>> Agreed, however...
>>>
>>> Why do these (maybe others) get caps in their names? they dont look
>>> right to me, compared to the others with nice names like usb-serial,
>>> piix-ide, or cirrus-vga.
>>>
>>>> -    sysbus_register_dev("Uni-north main", sizeof(UNINState),
>>>> +    sysbus_register_dev("Uni-north-main", sizeof(UNINState),
>>>>                          pci_unin_main_init_device);
>>>>      pci_qdev_register(&unin_main_pci_host_info);
>>>> -    sysbus_register_dev("DEC 21154", sizeof(UNINState),
>>>> +    sysbus_register_dev("DEC-21154", sizeof(UNINState),
>>>>                          pci_dec_21154_init_device);
>>>>      pci_qdev_register(&dec_21154_pci_host_info);
>>>> -    sysbus_register_dev("Uni-north AGP", sizeof(UNINState),
>>>> +    sysbus_register_dev("Uni-north-AGP", sizeof(UNINState),
>>>>                          pci_unin_agp_init_device);
>>>>      pci_qdev_register(&unin_agp_pci_host_info);
>>>> -    sysbus_register_dev("Uni-north internal", sizeof(UNINState),
>>>> +    sysbus_register_dev("Uni-north-internal", sizeof(UNINState),
>>>>                          pci_unin_internal_init_device);
>>>>      pci_qdev_register(&unin_internal_pci_host_info);
>>>>  }
>>
>> I can downcase them.  Blue Swirl, any objections?
>>
>
> I'd prefer the same names that are used by the device tree, like uni-n
> and uni-north-agp. Though the bridge is name poorly, just
> "pci-bridge".
>
> For example:
> http://penguinppc.org/historical/dev-trees-html/imac_400_1.html

If I read that document correctly, we have

    old qdev name               device tree name
    Uni-north main              uni-n
    Uni-north AGP               uni-north-agp
    Uni-north internal          pci
    DEC 21154                   pci-bridge

Do you want me to respin my patch?  If yes, the best way to make me do
exactly what you want is to tell me exactly what you want.  In this
case, tell me the names you want.
Blue Swirl Dec. 13, 2009, 7:11 a.m. UTC | #7
On Sat, Dec 12, 2009 at 6:04 PM, Markus Armbruster <armbru@redhat.com> wrote:
> Blue Swirl <blauwirbel@gmail.com> writes:
>
>> On Wed, Dec 9, 2009 at 11:43 AM, Markus Armbruster <armbru@redhat.com> wrote:
>>> Ian Molton <ian.molton@collabora.co.uk> writes:
>>>
>>>> Markus Armbruster wrote:
>>>>
>>>>> The place for verbose device names is DeviceInfo member desc.  The
>>>>> name should be short & sweet.
>>>>
>>>> Agreed, however...
>>>>
>>>> Why do these (maybe others) get caps in their names? they dont look
>>>> right to me, compared to the others with nice names like usb-serial,
>>>> piix-ide, or cirrus-vga.
>>>>
>>>>> -    sysbus_register_dev("Uni-north main", sizeof(UNINState),
>>>>> +    sysbus_register_dev("Uni-north-main", sizeof(UNINState),
>>>>>                          pci_unin_main_init_device);
>>>>>      pci_qdev_register(&unin_main_pci_host_info);
>>>>> -    sysbus_register_dev("DEC 21154", sizeof(UNINState),
>>>>> +    sysbus_register_dev("DEC-21154", sizeof(UNINState),
>>>>>                          pci_dec_21154_init_device);
>>>>>      pci_qdev_register(&dec_21154_pci_host_info);
>>>>> -    sysbus_register_dev("Uni-north AGP", sizeof(UNINState),
>>>>> +    sysbus_register_dev("Uni-north-AGP", sizeof(UNINState),
>>>>>                          pci_unin_agp_init_device);
>>>>>      pci_qdev_register(&unin_agp_pci_host_info);
>>>>> -    sysbus_register_dev("Uni-north internal", sizeof(UNINState),
>>>>> +    sysbus_register_dev("Uni-north-internal", sizeof(UNINState),
>>>>>                          pci_unin_internal_init_device);
>>>>>      pci_qdev_register(&unin_internal_pci_host_info);
>>>>>  }
>>>
>>> I can downcase them.  Blue Swirl, any objections?
>>>
>>
>> I'd prefer the same names that are used by the device tree, like uni-n
>> and uni-north-agp. Though the bridge is name poorly, just
>> "pci-bridge".
>>
>> For example:
>> http://penguinppc.org/historical/dev-trees-html/imac_400_1.html
>
> If I read that document correctly, we have
>
>    old qdev name               device tree name
>    Uni-north main              uni-n
>    Uni-north AGP               uni-north-agp
>    Uni-north internal          pci
>    DEC 21154                   pci-bridge
>
> Do you want me to respin my patch?  If yes, the best way to make me do
> exactly what you want is to tell me exactly what you want.  In this
> case, tell me the names you want.

'pci' and 'pci-bridge' are too generic, so please respin with these:
   Uni-north main              uni-north
   Uni-north AGP               uni-north-agp
   Uni-north internal          uni-north-pci
   DEC 21154                   dec-21154
diff mbox

Patch

diff --git a/hw/bt-hid.c b/hw/bt-hid.c
index 020176e..187c76b 100644
--- a/hw/bt-hid.c
+++ b/hw/bt-hid.c
@@ -566,6 +566,6 @@  static struct bt_device_s *bt_hid_init(struct bt_scatternet_s *net,
 
 struct bt_device_s *bt_keyboard_init(struct bt_scatternet_s *net)
 {
-    USBDevice *dev = usb_create_simple(NULL /* FIXME */, "QEMU USB Keyboard");
+    USBDevice *dev = usb_create_simple(NULL /* FIXME */, "usb-kbd");
     return bt_hid_init(net, dev, class_keyboard);
 }
diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
index 2d1dd4e..24af81c 100644
--- a/hw/cirrus_vga.c
+++ b/hw/cirrus_vga.c
@@ -3217,11 +3217,12 @@  static int pci_cirrus_vga_initfn(PCIDevice *dev)
 
 void pci_cirrus_vga_init(PCIBus *bus)
 {
-    pci_create_simple(bus, -1, "Cirrus VGA");
+    pci_create_simple(bus, -1, "cirrus-vga");
 }
 
 static PCIDeviceInfo cirrus_vga_info = {
-    .qdev.name    = "Cirrus VGA",
+    .qdev.name    = "cirrus-vga",
+    .qdev.desc    = "Cirrus CLGD 54xx VGA",
     .qdev.size    = sizeof(PCICirrusVGAState),
     .qdev.vmsd    = &vmstate_pci_cirrus_vga,
     .init         = pci_cirrus_vga_initfn,
diff --git a/hw/grackle_pci.c b/hw/grackle_pci.c
index 089d1fb..51699ee 100644
--- a/hw/grackle_pci.c
+++ b/hw/grackle_pci.c
@@ -178,7 +178,7 @@  static PCIDeviceInfo grackle_pci_host_info = {
 };
 
 static PCIDeviceInfo dec_21154_pci_host_info = {
-    .qdev.name = "DEC 21154",
+    .qdev.name = "DEC-21154",
     .qdev.size = sizeof(PCIDevice),
     .init      = dec_21154_pci_host_init,
 };
@@ -188,7 +188,7 @@  static void grackle_register_devices(void)
     sysbus_register_dev("grackle", sizeof(GrackleState),
                         pci_grackle_init_device);
     pci_qdev_register(&grackle_pci_host_info);
-    sysbus_register_dev("DEC 21154", sizeof(GrackleState),
+    sysbus_register_dev("DEC-21154", sizeof(GrackleState),
                         pci_dec_21154_init_device);
     pci_qdev_register(&dec_21154_pci_host_info);
 }
diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c
index 3b7c606..e1e626e 100644
--- a/hw/ide/cmd646.c
+++ b/hw/ide/cmd646.c
@@ -245,7 +245,7 @@  void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table,
 {
     PCIDevice *dev;
 
-    dev = pci_create(bus, -1, "CMD646 IDE");
+    dev = pci_create(bus, -1, "cmd646-ide");
     qdev_prop_set_uint32(&dev->qdev, "secondary", secondary_ide_enabled);
     qdev_init_nofail(&dev->qdev);
 
@@ -254,7 +254,7 @@  void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table,
 
 static PCIDeviceInfo cmd646_ide_info[] = {
     {
-        .qdev.name    = "CMD646 IDE",
+        .qdev.name    = "cmd646-ide",
         .qdev.size    = sizeof(PCIIDEState),
         .init         = pci_cmd646_ide_initfn,
         .qdev.props   = (Property[]) {
diff --git a/hw/ide/piix.c b/hw/ide/piix.c
index ec93f29..de36480 100644
--- a/hw/ide/piix.c
+++ b/hw/ide/piix.c
@@ -161,7 +161,7 @@  void pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
 {
     PCIDevice *dev;
 
-    dev = pci_create_simple(bus, devfn, "PIIX3 IDE");
+    dev = pci_create_simple(bus, devfn, "piix3-ide");
     pci_ide_create_devs(dev, hd_table);
 }
 
@@ -171,18 +171,18 @@  void pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
 {
     PCIDevice *dev;
 
-    dev = pci_create_simple(bus, devfn, "PIIX4 IDE");
+    dev = pci_create_simple(bus, devfn, "piix4-ide");
     pci_ide_create_devs(dev, hd_table);
 }
 
 static PCIDeviceInfo piix_ide_info[] = {
     {
-        .qdev.name    = "PIIX3 IDE",
+        .qdev.name    = "piix3-ide",
         .qdev.size    = sizeof(PCIIDEState),
         .qdev.no_user = 1,
         .init         = pci_piix3_ide_initfn,
     },{
-        .qdev.name    = "PIIX4 IDE",
+        .qdev.name    = "piix4-ide",
         .qdev.size    = sizeof(PCIIDEState),
         .qdev.no_user = 1,
         .init         = pci_piix4_ide_initfn,
diff --git a/hw/unin_pci.c b/hw/unin_pci.c
index 5b3f118..8fc6168 100644
--- a/hw/unin_pci.c
+++ b/hw/unin_pci.c
@@ -148,7 +148,7 @@  PCIBus *pci_pmac_init(qemu_irq *pic)
 
     /* Use values found on a real PowerMac */
     /* Uninorth main bus */
-    dev = qdev_create(NULL, "Uni-north main");
+    dev = qdev_create(NULL, "Uni-north-main");
     qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     d = FROM_SYSBUS(UNINState, s);
@@ -157,7 +157,7 @@  PCIBus *pci_pmac_init(qemu_irq *pic)
                                          pic, 11 << 3, 4);
 
 #if 0
-    pci_create_simple(d->host_state.bus, 11 << 3, "Uni-north main");
+    pci_create_simple(d->host_state.bus, 11 << 3, "Uni-north-main");
 #endif
 
     sysbus_mmio_map(s, 0, 0xf2800000);
@@ -166,12 +166,12 @@  PCIBus *pci_pmac_init(qemu_irq *pic)
     /* DEC 21154 bridge */
 #if 0
     /* XXX: not activated as PPC BIOS doesn't handle multiple buses properly */
-    pci_create_simple(d->host_state.bus, 12 << 3, "DEC 21154");
+    pci_create_simple(d->host_state.bus, 12 << 3, "DEC-21154");
 #endif
 
     /* Uninorth AGP bus */
-    pci_create_simple(d->host_state.bus, 11 << 3, "Uni-north AGP");
-    dev = qdev_create(NULL, "Uni-north AGP");
+    pci_create_simple(d->host_state.bus, 11 << 3, "Uni-north-AGP");
+    dev = qdev_create(NULL, "Uni-north-AGP");
     qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     sysbus_mmio_map(s, 0, 0xf0800000);
@@ -180,8 +180,8 @@  PCIBus *pci_pmac_init(qemu_irq *pic)
     /* Uninorth internal bus */
 #if 0
     /* XXX: not needed for now */
-    pci_create_simple(d->host_state.bus, 14 << 3, "Uni-north internal");
-    dev = qdev_create(NULL, "Uni-north internal");
+    pci_create_simple(d->host_state.bus, 14 << 3, "Uni-north-internal");
+    dev = qdev_create(NULL, "Uni-north-internal");
     qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     sysbus_mmio_map(s, 0, 0xf4800000);
@@ -260,41 +260,41 @@  static int unin_internal_pci_host_init(PCIDevice *d)
 }
 
 static PCIDeviceInfo unin_main_pci_host_info = {
-    .qdev.name = "Uni-north main",
+    .qdev.name = "Uni-north-main",
     .qdev.size = sizeof(PCIDevice),
     .init      = unin_main_pci_host_init,
 };
 
 static PCIDeviceInfo dec_21154_pci_host_info = {
-    .qdev.name = "DEC 21154",
+    .qdev.name = "DEC-21154",
     .qdev.size = sizeof(PCIDevice),
     .init      = dec_21154_pci_host_init,
 };
 
 static PCIDeviceInfo unin_agp_pci_host_info = {
-    .qdev.name = "Uni-north AGP",
+    .qdev.name = "Uni-north-AGP",
     .qdev.size = sizeof(PCIDevice),
     .init      = unin_agp_pci_host_init,
 };
 
 static PCIDeviceInfo unin_internal_pci_host_info = {
-    .qdev.name = "Uni-north internal",
+    .qdev.name = "Uni-north-internal",
     .qdev.size = sizeof(PCIDevice),
     .init      = unin_internal_pci_host_init,
 };
 
 static void unin_register_devices(void)
 {
-    sysbus_register_dev("Uni-north main", sizeof(UNINState),
+    sysbus_register_dev("Uni-north-main", sizeof(UNINState),
                         pci_unin_main_init_device);
     pci_qdev_register(&unin_main_pci_host_info);
-    sysbus_register_dev("DEC 21154", sizeof(UNINState),
+    sysbus_register_dev("DEC-21154", sizeof(UNINState),
                         pci_dec_21154_init_device);
     pci_qdev_register(&dec_21154_pci_host_info);
-    sysbus_register_dev("Uni-north AGP", sizeof(UNINState),
+    sysbus_register_dev("Uni-north-AGP", sizeof(UNINState),
                         pci_unin_agp_init_device);
     pci_qdev_register(&unin_agp_pci_host_info);
-    sysbus_register_dev("Uni-north internal", sizeof(UNINState),
+    sysbus_register_dev("Uni-north-internal", sizeof(UNINState),
                         pci_unin_internal_init_device);
     pci_qdev_register(&unin_internal_pci_host_info);
 }
diff --git a/hw/usb-bt.c b/hw/usb-bt.c
index 18d7a98..7f0a8b1 100644
--- a/hw/usb-bt.c
+++ b/hw/usb-bt.c
@@ -630,7 +630,7 @@  USBDevice *usb_bt_init(HCIInfo *hci)
 
     if (!hci)
         return NULL;
-    dev = usb_create_simple(NULL /* FIXME */, "QEMU BT dongle");
+    dev = usb_create_simple(NULL /* FIXME */, "usb-bt-dongle");
     s = DO_UPCAST(struct USBBtState, dev, dev);
     s->dev.opaque = s;
 
@@ -645,7 +645,7 @@  USBDevice *usb_bt_init(HCIInfo *hci)
 }
 
 static struct USBDeviceInfo bt_info = {
-    .qdev.name      = "QEMU BT dongle",
+    .qdev.name      = "usb-bt-dongle",
     .qdev.size      = sizeof(struct USBBtState),
     .init           = usb_bt_initfn,
     .handle_packet  = usb_generic_handle_packet,
diff --git a/hw/usb-bus.c b/hw/usb-bus.c
index 99d185e..3a0faa8 100644
--- a/hw/usb-bus.c
+++ b/hw/usb-bus.c
@@ -153,7 +153,7 @@  int usb_device_attach(USBDevice *dev)
 
     if (bus->nfree == 1) {
         /* Create a new hub and chain it on.  */
-        hub = usb_create_simple(bus, "QEMU USB Hub");
+        hub = usb_create_simple(bus, "usb-hub");
     }
     do_attach(dev);
     return 0;
diff --git a/hw/usb-hid.c b/hw/usb-hid.c
index f4a2a48..0beeca3 100644
--- a/hw/usb-hid.c
+++ b/hw/usb-hid.c
@@ -880,8 +880,7 @@  void usb_hid_datain_cb(USBDevice *dev, void *opaque, void (*datain)(void *))
 
 static struct USBDeviceInfo hid_info[] = {
     {
-        .qdev.name      = "QEMU USB Tablet",
-        .qdev.alias     = "usb-tablet",
+        .qdev.name      = "usb-tablet",
         .usbdevice_name = "tablet",
         .qdev.size      = sizeof(USBHIDState),
         .init           = usb_tablet_initfn,
@@ -891,8 +890,7 @@  static struct USBDeviceInfo hid_info[] = {
         .handle_data    = usb_hid_handle_data,
         .handle_destroy = usb_hid_handle_destroy,
     },{
-        .qdev.name      = "QEMU USB Mouse",
-        .qdev.alias     = "usb-mouse",
+        .qdev.name      = "usb-mouse",
         .usbdevice_name = "mouse",
         .qdev.size      = sizeof(USBHIDState),
         .init           = usb_mouse_initfn,
@@ -902,8 +900,7 @@  static struct USBDeviceInfo hid_info[] = {
         .handle_data    = usb_hid_handle_data,
         .handle_destroy = usb_hid_handle_destroy,
     },{
-        .qdev.name      = "QEMU USB Keyboard",
-        .qdev.alias     = "usb-kbd",
+        .qdev.name      = "usb-kbd",
         .usbdevice_name = "keyboard",
         .qdev.size      = sizeof(USBHIDState),
         .init           = usb_keyboard_initfn,
diff --git a/hw/usb-hub.c b/hw/usb-hub.c
index e5a0938..037867b 100644
--- a/hw/usb-hub.c
+++ b/hw/usb-hub.c
@@ -544,7 +544,7 @@  static int usb_hub_initfn(USBDevice *dev)
 }
 
 static struct USBDeviceInfo hub_info = {
-    .qdev.name      = "QEMU USB Hub",
+    .qdev.name      = "usb-hub",
     .qdev.size      = sizeof(USBHubState),
     .init           = usb_hub_initfn,
     .handle_packet  = usb_hub_handle_packet,
diff --git a/hw/usb-msd.c b/hw/usb-msd.c
index bb39b62..dec35bc 100644
--- a/hw/usb-msd.c
+++ b/hw/usb-msd.c
@@ -591,7 +591,7 @@  static USBDevice *usb_msd_init(const char *filename)
     }
 
     /* create guest device */
-    dev = usb_create(NULL /* FIXME */, "QEMU USB MSD");
+    dev = usb_create(NULL /* FIXME */, "usb-storage");
     qdev_prop_set_drive(&dev->qdev, "drive", dinfo);
     if (qdev_init(&dev->qdev) < 0)
         return NULL;
@@ -600,8 +600,7 @@  static USBDevice *usb_msd_init(const char *filename)
 }
 
 static struct USBDeviceInfo msd_info = {
-    .qdev.name      = "QEMU USB MSD",
-    .qdev.alias     = "usb-storage",
+    .qdev.name      = "usb-storage",
     .qdev.size      = sizeof(MSDState),
     .init           = usb_msd_initfn,
     .handle_packet  = usb_generic_handle_packet,
diff --git a/hw/usb-net.c b/hw/usb-net.c
index 2556e05..7e77788 100644
--- a/hw/usb-net.c
+++ b/hw/usb-net.c
@@ -1463,7 +1463,7 @@  USBDevice *usb_net_init(NICInfo *nd)
     USBDevice *dev;
     USBNetState *s;
 
-    dev = usb_create_simple(NULL /* FIXME */, "QEMU USB Network Interface");
+    dev = usb_create_simple(NULL /* FIXME */, "usb-net");
     s = DO_UPCAST(USBNetState, dev, dev);
 
     memcpy(s->conf.macaddr.a, nd->macaddr, sizeof(nd->macaddr));
@@ -1487,7 +1487,7 @@  USBDevice *usb_net_init(NICInfo *nd)
 }
 
 static struct USBDeviceInfo net_info = {
-    .qdev.name      = "QEMU USB Network Interface",
+    .qdev.name      = "usb-net",
     .qdev.size      = sizeof(USBNetState),
     .init           = usb_net_initfn,
     .handle_packet  = usb_generic_handle_packet,
diff --git a/hw/usb-ohci.c b/hw/usb-ohci.c
index 7ab3a98..a8a014c 100644
--- a/hw/usb-ohci.c
+++ b/hw/usb-ohci.c
@@ -1736,7 +1736,7 @@  static int usb_ohci_initfn_pci(struct PCIDevice *dev)
 
 void usb_ohci_init_pci(struct PCIBus *bus, int devfn)
 {
-    pci_create_simple(bus, devfn, "OHCI USB PCI");
+    pci_create_simple(bus, devfn, "pci-ohci");
 }
 
 void usb_ohci_init_pxa(target_phys_addr_t base, int num_ports, int devfn,
@@ -1762,8 +1762,7 @@  void usb_ohci_init_sm501(uint32_t mmio_base, uint32_t localmem_base,
 }
 
 static PCIDeviceInfo ohci_info = {
-    .qdev.name    = "OHCI USB PCI",
-    .qdev.alias   = "pci-ohci",
+    .qdev.name    = "pci-ohci",
     .qdev.desc    = "Apple USB Controller",
     .qdev.size    = sizeof(OHCIPCIState),
     .init         = usb_ohci_initfn_pci,
diff --git a/hw/usb-serial.c b/hw/usb-serial.c
index 223d4c3..3f3c1c5 100644
--- a/hw/usb-serial.c
+++ b/hw/usb-serial.c
@@ -577,7 +577,7 @@  static USBDevice *usb_serial_init(const char *filename)
     if (!cdrv)
         return NULL;
 
-    dev = usb_create(NULL /* FIXME */, "QEMU USB Serial");
+    dev = usb_create(NULL /* FIXME */, "usb-serial");
     qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);
     if (vendorid)
         qdev_prop_set_uint16(&dev->qdev, "vendorid", vendorid);
@@ -597,7 +597,7 @@  static USBDevice *usb_braille_init(const char *unused)
     if (!cdrv)
         return NULL;
 
-    dev = usb_create(NULL /* FIXME */, "QEMU USB Braille");
+    dev = usb_create(NULL /* FIXME */, "usb-braille");
     qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);
     qdev_init(&dev->qdev);
 
@@ -605,8 +605,7 @@  static USBDevice *usb_braille_init(const char *unused)
 }
 
 static struct USBDeviceInfo serial_info = {
-    .qdev.name      = "QEMU USB Serial",
-    .qdev.alias     = "usb-serial",
+    .qdev.name      = "usb-serial",
     .qdev.size      = sizeof(USBSerialState),
     .init           = usb_serial_initfn,
     .handle_packet  = usb_generic_handle_packet,
@@ -625,8 +624,7 @@  static struct USBDeviceInfo serial_info = {
 };
 
 static struct USBDeviceInfo braille_info = {
-    .qdev.name      = "QEMU USB Braille",
-    .qdev.alias     = "usb-braille",
+    .qdev.name      = "usb-braille",
     .qdev.size      = sizeof(USBSerialState),
     .init           = usb_serial_initfn,
     .handle_packet  = usb_generic_handle_packet,
diff --git a/hw/usb-uhci.c b/hw/usb-uhci.c
index ba26a4e..dc52737 100644
--- a/hw/usb-uhci.c
+++ b/hw/usb-uhci.c
@@ -1111,12 +1111,12 @@  static int usb_uhci_piix4_initfn(PCIDevice *dev)
 
 static PCIDeviceInfo uhci_info[] = {
     {
-        .qdev.name    = "PIIX3 USB-UHCI",
+        .qdev.name    = "piix3-usb-uhci",
         .qdev.size    = sizeof(UHCIState),
         .qdev.vmsd    = &vmstate_uhci,
         .init         = usb_uhci_piix3_initfn,
     },{
-        .qdev.name    = "PIIX4 USB-UHCI",
+        .qdev.name    = "piix4-usb-uhci",
         .qdev.size    = sizeof(UHCIState),
         .qdev.vmsd    = &vmstate_uhci,
         .init         = usb_uhci_piix4_initfn,
@@ -1133,10 +1133,10 @@  device_init(uhci_register);
 
 void usb_uhci_piix3_init(PCIBus *bus, int devfn)
 {
-    pci_create_simple(bus, devfn, "PIIX3 USB-UHCI");
+    pci_create_simple(bus, devfn, "piix3-usb-uhci");
 }
 
 void usb_uhci_piix4_init(PCIBus *bus, int devfn)
 {
-    pci_create_simple(bus, devfn, "PIIX4 USB-UHCI");
+    pci_create_simple(bus, devfn, "piix4-usb-uhci");
 }
diff --git a/hw/usb-wacom.c b/hw/usb-wacom.c
index ef61376..38713ee 100644
--- a/hw/usb-wacom.c
+++ b/hw/usb-wacom.c
@@ -409,8 +409,8 @@  static int usb_wacom_initfn(USBDevice *dev)
 }
 
 static struct USBDeviceInfo wacom_info = {
-    .qdev.name      = "QEMU PenPartner Tablet",
-    .qdev.alias     = "wacom-tablet",
+    .qdev.name      = "usb-wacom-tablet",
+    .qdev.desc      = "QEMU PenPartner Tablet",
     .usbdevice_name = "wacom-tablet",
     .qdev.size      = sizeof(USBWacomState),
     .init           = usb_wacom_initfn,
diff --git a/hw/vmware_vga.c b/hw/vmware_vga.c
index 240731a..33d4692 100644
--- a/hw/vmware_vga.c
+++ b/hw/vmware_vga.c
@@ -1194,11 +1194,11 @@  static int pci_vmsvga_initfn(PCIDevice *dev)
 
 void pci_vmsvga_init(PCIBus *bus)
 {
-    pci_create_simple(bus, -1, "QEMUware SVGA");
+    pci_create_simple(bus, -1, "vmware-svga");
 }
 
 static PCIDeviceInfo vmsvga_info = {
-    .qdev.name    = "QEMUware SVGA",
+    .qdev.name    = "vmware-svga",
     .qdev.size    = sizeof(struct pci_vmsvga_state_s),
     .qdev.vmsd    = &vmstate_vmware_vga,
     .init         = pci_vmsvga_initfn,
diff --git a/usb-bsd.c b/usb-bsd.c
index a66364f..d67db4e 100644
--- a/usb-bsd.c
+++ b/usb-bsd.c
@@ -361,7 +361,7 @@  USBDevice *usb_host_device_open(const char *devname)
             goto fail;
         }
 
-        d = usb_create(NULL /* FIXME */, "USB Host Device");
+        d = usb_create(NULL /* FIXME */, "usb-host");
         dev = DO_UPCAST(USBHostDevice, dev, d);
 
         if (dev_info.udi_speed == 1)
@@ -393,7 +393,7 @@  fail:
 }
 
 static struct USBDeviceInfo usb_host_dev_info = {
-    .qdev.name      = "USB Host Device",
+    .qdev.name      = "usb-host",
     .qdev.size      = sizeof(USBHostDevice),
     .init           = usb_host_initfn,
     .handle_packet  = usb_generic_handle_packet,
diff --git a/usb-linux.c b/usb-linux.c
index 285ac22..0c027ca 100644
--- a/usb-linux.c
+++ b/usb-linux.c
@@ -979,8 +979,7 @@  static int usb_host_initfn(USBDevice *dev)
 }
 
 static struct USBDeviceInfo usb_host_dev_info = {
-    .qdev.name      = "USB Host Device",
-    .qdev.alias     = "usb-host",
+    .qdev.name      = "usb-host",
     .qdev.size      = sizeof(USBHostDevice),
     .init           = usb_host_initfn,
     .handle_packet  = usb_host_handle_packet,
@@ -1010,7 +1009,7 @@  USBDevice *usb_host_device_open(const char *devname)
     USBHostDevice *s;
     char *p;
 
-    dev = usb_create(NULL /* FIXME */, "USB Host Device");
+    dev = usb_create(NULL /* FIXME */, "usb-host");
     s = DO_UPCAST(USBHostDevice, dev, dev);
 
     if (strstr(devname, "auto:")) {